Hi,
yesterday something strange happened. I pluged in my earphones in the 3.5mm port on the top.
When I sared at the display, there was only the Samsung Omnia 7 Logo from the start. It does appear for ome time then disappears for short time and finally appears again. This comes over and over again.
I tried to flash a clean Rom on the phone. After reboot, I wanted to change the language and after I tapped in the language the phone freezed.
From now on, the phone's like dead. I only can go to the download mode or the format window.
IT DOESN'T START/ BOOT ANYMORE.
Is my phone dead or is there any chance to save it?
Thx
UPDATE:
I tried to flash a new ROM via the DFT Magdldr Loader--> Fail
I tried to load the Original ROM via Download Mode --> doesn't reboot --> Fail
mhaimi said:
UPDATE:
I tried to flash a new ROM via the DFT Magdldr Loader--> Fail
I tried to load the Original ROM via Download Mode --> doesn't reboot --> Fail
Click to expand...
Click to collapse
language packs missing?
try to downgrade, install magldr and them download a custom rom.(always check the languages available before changing them.)
Related
Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas
Wait, arent the status bar white by defoult ?
No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?
Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button
When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?
You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed
hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!
GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008
try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.
Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??
cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.
Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..
Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App
Hi guys
Just wondering if anyone can point me in the right direction before I send my Samsung Omina 7 in for repair. First a brief history
Updated previously from NoDo to the first mango beta without issue, then again to the refresh beta without a problem. Decided today that I would for RTM.
During update process updatewp kept timing out - I've since read resetting the device before attempting or deleting some of the zip files in the RTM package fixes this.
Instead of searching forums I unplugged the device and reset it when it wouldn't reboot. This left me with a completely unstable OS. It took ages to boot up and most apps wouldn't load.
I tried to restore my NoDo backup from the Zune beta but it didn't work. I uninstalled Zune Beta and drivers and attempted the restore using the current Zune version and again the restore would not work.
Figured I would just reflash the rom instead so I followed the guide below.
http://forum.xda-developers.com/showthread.php?t=973420&highlight=how+to+rom
This also failed - I can get into download mode, and WP7 Downloader looks like it's proceeding correctly but it is my understanding that after the first reboot it should go into the "connect to computer" style mode with the picture of the phone and a computer connected with USB. My phone does not do this - instead it boots to the Samsung Omina screen and just sits there. It seems to quickly reboot every 10 mins or so.
I've attempted the flash a second time and got the same result. Any ideas?
just goto download mode and flash it with another firmware..
If you can't get into download mode, just go to your closest DIY shop, grab 3 100k resistors and make yourself a JIG.
Full instructions here : http://forum.xda-developers.com/showthread.php?t=1092824&highlight=JIG
You should be able to reboot in download mode, and then restore to whatever ROM you want
Just tried that - used a different one but got the same result.
When WP7 Downloader gets to "Plz wait while rebuilding" the phone has rebooted to the samsung omnia 7 screen and not the computer connection screen.
Weird.
If you got to download mode after using the JIG, flash should be flawless.
I'm clueless here, apart from trying again with a different firmware/JIG.
Just and FYI. I couldn't fix it myself so I send it in for repair. They needed to replace the motherboard.
Hello everybody,
i´m new here and have a great problem on my Galaxy S I9000.
I hat Android 2.2 installed on that device and wanted to install Cyanogenmod by this guide (cant post links)
The Problem i had was i couldn´t get into the downloadmode or recoverymode (Volume up/down, home and Power button)
So i made it with the Android SDK (adb reboot download) to get into the downloadmode.
Once I was there i made the part with the heimdall flash --kernel zImage.
In the end it said the Installation was succesfully and rebootet the Phone. Now it always reboots and only shows the "Samsung Galaxy S I9000" screen and then restarts.
Notice, i didnt do anything else instead the things above (no rootet phone, no flash or something like this). I also had problems installing Android 2.3 with Kies on this device so i tried it with 2.2.
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.
Pinije said:
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.
Click to expand...
Click to collapse
For USB Connection issues try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
For recovery try to Flash Rescue kit for i9000 http://forum.xda-developers.com/showpost.php?p=29331775&postcount=1
Sounds like you flashed kernel only, so the proper system is missing.
Try to get into download mode again, and flash a complete ROM (kernel, phone, csc, database, pit512, repartition...) using Heimdal or Odin. Search sammobile.com or the forum to get the ROM/version you need/want (if stock is your choice, use the 3-files-firmware).
If you want to install CyanogenMod, you'll need to get into recovery mode and install the CyanogenMod.zip from here.
Sent from my GT-I9000 using xda app-developers app
hello people , I have a neo s3 and he stopped on the logo of Samsung ( why I was in a rom custom and clicked to format , so I also had a custon recovery then he stopped ) and is only trying to enter the recovery mode and still not working
already tried everything Odin and etc ..
he does not recognize in any PC with no driver
and also he just turn on with a charger conected
Can someone help me please!!!
PS: sorry for my bad english
how about download mode?
DerPuGNa said:
how about download mode?
Click to expand...
Click to collapse
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try connecting your phone when its in download and try with Odin, if it recognize your device than just flash stock rom.
JUST AL said:
yeah i can boot on download mode but he dosent recognize in any pc...
i think it is because the usb port is a little damaged so i replace it soon , but i cant do it at now , that is why i asking here...
Click to expand...
Click to collapse
Try a different version of Odin first. For me only 3.09 and upwards works.
Install Samsung kies 3 to make the phone recognizable by pc and try flashing stock firmware with odin 3.09
First of all, you should download the drivers and stock rom from Sammobile.
Found the drivers here: http://www.mediafire.com/download/k93a92c9rpyg4r5/Samsung-Usb-Driver-v1.5.55.0.exe
(not sure if they work, go and ahead install them and boot to download mode, then see, if odin recognizes it)
Latest Odin download: http://odindownload.com/
If the drivers work and your device is connected to the computer(also boot into download mode) and odin recognizes it:
1) Choose bootloader, then search for your downloaded firmware.
2) Head to the options tab and tick "Nand Erase All", "Phone EFS Clear" and "Phone Bootloader Update".
3) Then hit start and wait it to finish.
It should delete everything on your phone, restore it like it came out of the box.
If the drivers don't work let me know, I'll search for other working ones.
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.