Related
Title says it all.
Phone was on before submersion and non-responsive after. I removed all easily removed parts (back, battery, SIM, stylus) and it is air drying.
Yes ... I washed my hands!
Any suggestions?
To be honest I think a total strip down my be in order to totally get rid of all the moisture.
I might be wrong but Never Say Never
Even if you totally stripped it down the damage is permanant and done
I'm not trying to be a downer, but here is the reality.
1) You probably shorted the phone out. It's dead
2) By some LUCKY chance you didn't short the phone out, let it dry for a LONG time with out supply any power to it. Assuming you can bring it back to live, the internals have already gotten wet. Water + Electronics = Corrosion. Your phone won't last long
That sucks man
I would suggest a full or as full as you can tear down and a flush with distilled water and then a very good drying.
I left mine out screen facing up in the pouring rain for 5 hours
was soaking but still working lol
the backlight wasnt happy though,
dried it out and took the battery out after playing with it wondering how it still worked.
all was well
occasionaly you get the white powedery corrosion on the various processor legs (makes contacts where you dont want them ) which most of the time cleaning them off with fix and issues .
Edit my wizard was playing some mp3s the otherday and fell of motorbike at 50 mph and hit the road , stopped picked it up it was still playing the same tune through the speakers ,
amazing build quality for a heavy device to survive that .
Just wondering... When using your phone in the rain is it dodgy? Like will it break the touch screen if it gets too wet? Should we all be buying gay covers?
TheGMan said:
Title says it all.
Phone was on before submersion and non-responsive after. I removed all easily removed parts (back, battery, SIM, stylus) and it is air drying.
Yes ... I washed my hands!
Any suggestions?
Click to expand...
Click to collapse
You should rename yourself the PMan! :lol: Sorry could not help myself :wink:
There is some hope for you - read this story http://forum.xda-developers.com/viewtopic.php?t=54874
If you plan on attempting to clean it, don't use distilled water!
The best thing to use would be pure rubbing alcohol.
Well ... disassembled and patted it dry. Left it out to dry for about 24 hours ... reassembled.
Viola!
Powers up and everything seems to working fine.
GldRush98 said:
Even if you totally stripped it down the damage is permanant and done
I'm not trying to be a downer, but here is the reality.
1) You probably shorted the phone out. It's dead
2) By some LUCKY chance you didn't short the phone out, let it dry for a LONG time with out supply any power to it. Assuming you can bring it back to live, the internals have already gotten wet. Water + Electronics = Corrosion. Your phone won't last long
That sucks man
Click to expand...
Click to collapse
Well you are a downer man.
New phones now are hard to short like that, though water do soak into the boards, just hope it didnt soak and damage your screen. Just take apart and dry.
I woke up this morning to find my 8525 sitting in my computer chair as usual. Only to reach over and grab it, and ....its sitting in three inches of water. I have no idea what happened, or how it got there. All i know is my phone wont turn on, and is totally dead. Is there ANYTHING that can be done to right this horrid tragedy? Any help would be a gift from god. Thanks
Wow.
Sorry about that.
Let it dry out before trying to use it. Since it's wet, you have nothing to lose by taking it apart to facilitate this. You could dry it faster by using a hair dryer but NOT on the heated setting.
agreed; but let it dry for a day or two before you try, you should also put it somewhere that will provide additional moisture evaporation (gas oven with pilot lights or a furnace room, behind a PC fan or the like). i saved my old Sony S710a by letting it bake in my hot car for about 6 hours while i was at work. just make sure its totally dry before you try, and considering you already voided the warranty with the pool of water incident, you might as well take it apart if you can to make sure its completely dry.
hmm, bad luck.
Try all the above suggestions. But make sure you have disconnected your battery
Tried putting the battery back in after about a good 4-5 hours of being in the sun. All i get is a crackling noise when i try to place the battery to the metal conductors
Ewww.. I know it is stressful for you not to switch on the phone, but doing that will just make matter worst. Since you said that it wont turn on, I presume that you've tried it once (Strike 1), and you did it again 4-5 hours later (Strike 2), which usually others just leave it for at least 1 day (but probably the sun does help).
Can you identify what water is it? Can there be mineral within? Which may cause a short circuit somewhere in the phone. You'll need to open up the phone and clean it up somehow.. either DIY or get some phone shop people to do it. Your warranty is 'washed' anyway.
Try This
Stop Drinking!
Read This To Possible Save You Phone
OK, this comes from my many decades in the electronics industry.
1. PULL the battery. Do not put it back in in few hours.
2. Where did the water come from? Was it really water or? You need to know this. It's real important because mostlikly the PCB is contaminated. Anything that got inside has most likely contaminated the board and will cause shorts, intermitent contacts and the like. Even rain or spring water, it's the minerals...
What you have to do most likely is disassemble the unit. Get a gallon of DISTILLED (not Spring) water. Distilled, also know as deionized is free of all minerals. You are going to have to carefully submerge the board without the LCD in the water and gently rub it with a very soft tooth brush while underwater. Next take it out and put in another bath of distilled water. Agitate it gently. This proces should remove any contamination as long as the offending liquid is not sticky or heavily acidic or base. In the case of the later 2, you are most likely screwed.
Ok, so now you have a wet board. Genly shake the excess water off of it. Turn your oven onto WARM. Nothing above 150 F. Let it warm up and then shut the oven off. Put the PCB in the middle of the oven directly on the rack, close the door and come back 8 to 10 hours later. If the board isn't dry, repeat the steps again.
If you are luck and didn't fry it from trying to power it up, it may work again.
I have saved lots of radio equipment from rain & saltwater submergence this way.
Feel free to PM me if you need to. Good Luck.
I used to have a motorola and dropped it into a bucket of water. Dried out in a few days and it was working fine.
my 8525 recently fell in the sink. as soon as i seen it in the sink i pulled the battery out. rigged the phone up on something in the floor so air could ventilate under and over, set the hair dryer on high (but without the heat) and 5 or so ventilation fans from a desktop pc wired to a 9v battery. let the hair dryer go for about 15 minutes but left the fans on over night. took the phone with me to school the next day and left it in the car during both of my classes. came out put the battery in and powered it up. works just fine now
http://www.wikihow.com/Save-a-Wet-Cell-Phone
ive heard the rice thing works, ive alway wanted to flush with alcohol, that would in theory dilute the water and the alcohol would dry out faster.
Ok so heres the deal. I put the battery in. Power up the phone, gets to the vp3g startup screen, then fades to white. Could someone point me in the direction of a tutorial that shows me how to disassemble a Hermes CORRECTLY.
Hopefully ill be able to give it a DI Water bath and breath a little life back into her. Thanks for all the help guys, I really appreciate it
It's drying out slowly. I had a Hermes that did the same thing - eventually getting to the "screen behavior" you describe. I never fully disassembled it. I just let it sit open, with the battery out, keyboard pulled out, and the back off. Eventually (after leaving overnight), it was fine. Worked normal ever since that with one exception.. I had forgotten to pull the SD card. The SD socket never worked again :-(
Moral of the story: don't forget to take out the SD card.
todd_jg said:
It's drying out slowly. I had a Hermes that did the same thing - eventually getting to the "screen behavior" you describe. I never fully disassembled it. I just let it sit open, with the battery out, keyboard pulled out, and the back off. Eventually (after leaving overnight), it was fine. Worked normal ever since that with one exception.. I had forgotten to pull the SD card. The SD socket never worked again :-(
Moral of the story: don't forget to take out the SD card.
Click to expand...
Click to collapse
yeah i got lucky. when mine fell in the sink i had the SD card out and in the laptop doing hw. so i guess im really lucky that the sd socket still works
Not worried about the SD card as much... Anyway, Ive popped the back off of my 8525 after removing a couple screws. On the back of the circuit board there is white material that can be wiped off with a little rubbing alcohol and an ear swab. What is that crap? Ill go further in depth here soon once it fully drys. I sure hope I can get this thing running again, birthday is the 13th and would be a nice little gift to myself to get the phone working. Thanks for the help guys
WOW Just look it here...Thats what I call the Power of Unity man. Great piece of work, info. I love all You people. If the world learns anything from XDA developers then there wont be any more human sufferings I am sure..Enjoy friends the power of forum..
If it fades to white, it is still wet.
You need to let it dry a lot longer before trying to use it.
Sterch said:
On the back of the circuit board there is white material that can be wiped off with a little rubbing alcohol and an ear swab. What is that crap?
Click to expand...
Click to collapse
Well, those are either stuff from the water or stuff from your phone that is washed and gathered to form some dangerous circuits (much like coffee water rings, that things tend to get to the edge of waters). These stuff may conduct electricity, hence making your phone goes nuts. Search and destroy all these 'crap' Good luck. Don't try the phone unnecessarily until you are sure that all 'crap's are gone. One of these 'crap' may potentially kill your phone (ok, it is usually not that serious, but just incase )
Sad story, I was lucky with similar story, but much cheaper. I left my Nokia BH-600 Blue Tooth Head set in my panties and give them to washing-mashine. 40 degrees program for 30 minutes ended by wringing on 800 turns/minute
When I found it in the pocket I just left it to wither up and it didn’t worked. So I tried to re-charge it and WOW it works and the battery has normal capacity.
Video of 8525 / Hermes being dismantled
Sterch said:
...Could someone point me in the direction of a tutorial that shows me how to disassemble a Hermes CORRECTLY ...
Click to expand...
Click to collapse
Don't forget the popcorn: http://www.youtube.com/watch?v=zsljpn74SW0
My HD dropped in the water. I dissembly it and let it dry for 3 days. Battery was only 30% charged. After 3 days when I switched it on it worked fine for 2 days but now it switched off and is not switching on again . I replaced battery but nothing happened. Any help ...
Normally speaking electronics would be able to handle the water if dried thoroughly and as quickly as possible (using a hairdryer is recommended) and it's the battery which dies on the spot and can actually explode. In your case tho it worked for 2 days after, so that's quite lucky.
If you haven't done it yet, there's a link in the wiki to the technical service manual which shows how to disassemble the phone to it's smallest parts. If you're up to it, you could see if there's anything turning brown\reddish. If so (or not) you could try clean everything as best possible (perhaps with some alcohol) and then try make use of your warranty...
Could very well be the powerswitch itself which is just sticking tho..
so sorry for you man!
That's too bad. I dunno if this will help you at this point since it's already been several days since it fell in the water, but I read that if you drop your phone in water, you should take whatever you can apart, dry them the best you can, and then submerge all of the parts in dry, uncooked rice. This is supposed to absorb all of the moisture from the parts. I actually used this technique once when my old phone fell in water and it worked perfectly.
I know this won't help you at this point, but it may help others...good luck.
BMW^Z4 said:
My HD dropped in the water. I dissembly it and let it dry for 3 days. Battery was only 30% charged. After 3 days when I switched it on it worked fine for 2 days but now it switched off and is not switching on again . I replaced battery but nothing happened. Any help ...
Click to expand...
Click to collapse
Just a word of thumb to all people. Once the phone / battery has been submerged in water you need to discard the battery right away. Never use a battery that has been exposed to water again in your phone. That is how you fry a phone. I bet if you would have used another battery in your phone it might still work.
Too late for BMW^Z4, but to others:
If it was dropped in dirty or especially salty water, after taking it apart, before drying it, you may want to submerge/rinse it in even more clean water. Distilled water would be even better.
Any left over residue (especially salt) will accelerate corrosion of contacts and leads and could indeed cause it too fail a few days later.
Buy another one
AllTheWay said:
Just a word of thumb to all people. Once the phone / battery has been submerged in water you need to discard the battery right away. Never use a battery that has been exposed to water again in your phone. That is how you fry a phone. I bet if you would have used another battery in your phone it might still work.
Click to expand...
Click to collapse
Which is why I said:
'If so (or not) you could try clean everything as best possible (perhaps with some alcohol) and then try make use of your warranty...'
If you take it back to the store and they (HTC) see you've used it as a submersible they'll turn you down and charge you for the repairs..
I dropped my phone in toilet too. Was in back pocket. I heard a clunk and turned around and noticed it was my phone. I quickly removed it. Took cover, battery, sim and sd card out and dried it with tissue. Then i used those super powerful Dyson heated hand driers to dry it as much as possible. It happened Monday night and I still have not tried putting in the battery. Now I don't know if I should try the battery or just buy a new one from the posts up. I am dreading it if it does not work. I would hate to have to buy another HD as they are so expensive. I guess toilet water is not considered clean. Hope no corrosion.
A friend send I should leave it overnight in white spirit but i did not trust him.
Hoping all is well.....
So sorry to hear this.
In another forum, somone accidentally pour coffee on his Athena.
Some one had suggested in another forum that you bury your HD with rice as the later has the moisture absorbing property. Of course, if it is dirty, you should wash it with clean water first.
I would leave it for a few days to let any water completely evaporate before trying on.
I think there may be hope still. Let's keep our finger cross.
tboy2000 said:
A friend send I should leave it overnight in white spirit but i did not trust him.
Click to expand...
Click to collapse
Great way to dissolve the remains of your phone Hope your friend wasn't serious.
Unless he meant alcohol. He said he used to do it with laptops when they were sent in to repair to him.
What do you guys think? Should I try inserting my battery in again or not even try it and just buy a brand new battery?
tboy2000 said:
Unless he meant alcohol. He said he used to do it with laptops when they were sent in to repair to him.
What do you guys think? Should I try inserting my battery in again or not even try it and just buy a brand new battery?
Click to expand...
Click to collapse
A couple people above you specificly stated to NOT use a battery that has suffered water damage. Get a new battery or risk frying your phone for good.
3 days
3 days may have not been enough unless you left it in a hot dry place. I once put an old nokia phone in the washing machine. When it came out it was full of water and the water had shorted and turned it off (obviously). I wrapped it in a couple of layers of toilet roll and pushed it down the back of the radiator. Water dropped out the bottom and steam went out from the top. This ensures there is no water left. Next (when fully dry) take some sandpaper to the battery connections in the phone and the battery. Water can oxidise the heads and you may not be getting a good connection. Try again and try a friends battery if that does not work.
Good luck (if its not already too late)
i think is too late but....
the better way to avoid definitive damages was an immediate extraction of battery and cards, rinsing in distilled water to avoid corrosion or salt deposition and put on gentle warm hair flux for a long long time.
polish any visible contact with very soft paper and replace with a new battery
pray if you believe and try to turn on
let us know good luck
giano
eaglesteve said:
Some one had suggested in another forum that you bury your HD with rice as the later has the moisture absorbing property. Of course, if it is dirty, you should wash it with clean water first.
Click to expand...
Click to collapse
This is a very good idea! The rice will definitely absorb the moisture.
tboy2000 said:
Unless he meant alcohol. He said he used to do it with laptops when they were sent in to repair to him.
What do you guys think? Should I try inserting my battery in again or not even try it and just buy a brand new battery?
Click to expand...
Click to collapse
http://video.about.com/cellphones/Revive-Waterlogged-Cell-Phone.htm
Check out that video for more information. I don't know if it will help but they don't mention about getting a new battery.
However I have heard differing reports.
tboy2000 said:
I dropped my phone in toilet too. ... I guess toilet water is not considered clean.
Click to expand...
Click to collapse
I guess that depends if it was before or after....
Seriously, while urine is salty, conductive and corrosive, the actual water used in the toilet is in fact as clean as that out of your kitchen tap.
If you took it out that quickly, and if it was clean barely conductive water, the battery may not only not be damaged, it may still hold a charge. If you have a multimeter, and you can measure between 3 to 4 Volt, I am fairly sure the battery is fine. Though I am not taking responsibility....
Phone in water
Hi guys,
i just read the HTC water story. Clean it first with pure water (best distilled water) and then use pure alcohol and submerge the electroncis in it.
The water at first replaces the dirt water and washes away particles or solids. As water takes long time to dry alcohol is used to replace the water completely. Alcohol has also a much lower conductivity - therefore avoiding shortened circuits due to salts or similar.
Hope this gives some clarification...worked once in a museum where we had mobiles and they pretty regularly fell into the toilet
Have fun with your HTC,
Nils
I used thoses Dyson fast hand dryers - the ones where you dip your hands in and out. After seeing the video I hope I have not done more damage. I was in a public toilet when it happened so had no access to distilled water, alcohol or rice.
I will find out tomorrow if my phone works and will let everyone know. Fingers crossed.
I have already started looking online for a cheap secondhand HD so if anyone knows of one let me know. London based. I guess I don't have much condidence in the phone working.
I got you beat on that one, don't ask how, but I got coffee cream (liquid) on my HD. Broke it down to component level, cleaned, reassembled and everything is working fine. No corrosion, no battery loss. Luck of the draw I suppose. Now I always have HD in protective case.
So I dropped my N1 in water. Took out the battery as soon as possible then I dried what I could with a towel.
After this I tried hours of the rice method (putting my N1 in a bag of dry rice to dry it out). And I was able to successfully boot up my phone again, almost everything works fine but the digitizer/touch screen has some issues.
The rightest side of the screen, about an inch worth is completely unresponsive, so if I load up my app drawer and try to click anything on the right it won't work at all just so you know what I mean.
What can I do about this? Is this a simple fix? Do I just need a new digitizer? Or is it something else?
Water damage can affect anything. Luckily the digitizer is only $25 and there are tons of videos on how to disassemble the phone.
Sounds to me like you've still got a short somewhere inside your N1. Here are some suggestions.
1. Rice is a desiccant, it takes a LONG TIME to actually dry-out something like the internals of a phone. If you can part with the phone for that long, I'd suggest leaving it in the rice for more like 72hours!!
2. If you can't give it that much time, and you've got some tools, skills and a willingness to take apart your N1? Then search youtube for "nexus one disassembly" and take it apart, being extra sure to manually dab dry all areas possible (especially in the digitizer area as you've stated issues around there).
3. Finally, if those steps don't work, you're looking at a digitizer replacement. Which, if you've already taken apart your N1 from step #2, will be an easier swap out for you to handle.
My N1 too went for an unwanted splash as well. Total submersion for a good few seconds as I had to fish it out. Water had gotten into the screen, EVERYTHING was wet.
I had the tools and the mindset that my N1 was likely dead anyway so taking it apart couldn't hurt any further. So I took it completely apart, used a paper towel to dab dry everything possible that I could. Then I left everything out on the table overnight to dry.
Next morning I put it all back together and to my delighted surprise everything worked!
Our N1s are troopers! I'm confident you can bring yours back to full life!
Good luck!
Thanks for the responses!
I will definitely try taking it apart and I'll post back soon on the outcome, if I get lazy though I'll just buy a new digitizer.
How is it possible that water doesn't hurt your N1? It's completely incredible. Few years ago i had a samsung player (my son in fact) that was in contact with water (no immersion!!) and after drying for a week (air then hair-drier!) it was impossible to get it on again.
Is N1 that strong!! So lucky you are!!
abccg said:
Thanks for the responses!
I will definitely try taking it apart and I'll post back soon on the outcome, if I get lazy though I'll just buy a new digitizer.
Click to expand...
Click to collapse
Well if you buy a new digitizer you're gonna have to take it apart anyway haha.
Sent from my Nexus One using Tapatalk
abccg said:
So I dropped my N1 in water. Took out the battery as soon as possible then I dried what I could with a towel.
After this I tried hours of the rice method (putting my N1 in a bag of dry rice to dry it out). And I was able to successfully boot up my phone again, almost everything works fine but the digitizer/touch screen has some issues.
The rightest side of the screen, about an inch worth is completely unresponsive, so if I load up my app drawer and try to click anything on the right it won't work at all just so you know what I mean.
What can I do about this? Is this a simple fix? Do I just need a new digitizer? Or is it something else?
Click to expand...
Click to collapse
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Seems like there is still a short in your cellphone and i would recommend you call your manufacturer for this. Anyway, it's risky to repair a cellphone by yourself.
A little over a year ago I washed my Nexus One in the washing machine. Extra bleach, long cycle with an extra rinse cycle since it was a bunch of dirty clothing.
I remembered it was in my pocked when I went to remove my clothing, I was sure it was dead.
I pulled the battery and put the phone on the dry air vent of my dehumidifier for two days. The vent blew warm, completely dry air directly into the open back of my phone.
I popped the battery back in and it's been working like new ever since. The camera colors are ever so slightly off, however.
Let the phone dry out before you try to turn it back on.
Recently had the same issue. In my case was a bit easier.
What I did - removed back cover, battery, SIM, sd-card..
Switched my laptop and loaded it with compiling linux kernel. Then decoding HD video with handbrake. The aim was to get a constant flow of warm air (abt 70 degrees Celcius). And I put my phone close to vent fan out of my laptop. It is not overheating too much (like you can with air dryer).
I had a water damage as well, sliped with phone into the while geocaching. The salt walter wasn't good for my phone... :-(
CCpotter said:
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Seems like there is still a short in your cellphone and i would recommend you call your manufacturer for this. Anyway, it's risky to repair a cellphone by yourself.
Click to expand...
Click to collapse
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.
CCpotter said:
Use rice is a real bad idea, hairdryer is the best and i'm pretty sure you can find one in your house or borrow one from your neighbour
Click to expand...
Click to collapse
cyberstoic said:
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.
Click to expand...
Click to collapse
Rice is actually a very good thing to use just like cyberstoic says. It sucks the water into the rice and gets it out of the device.
The reason he listed for the hair dryer is valid, but it isn't the main reason. The main reason is that the hair dryer will just cause the water to evaporate, but that doesn't necessarily mean that the super humid air will leave the device, so as soon as it cools back down, you will still have that moisture in there.\
This is why rice or other desiccants (like all those silica gel packets that come with a lot of packaging) are used. They actually pull the moisture out of the device.
Rice worked for me when my N1 spent a night soaking in seltzer. (not completely submerged, but enough to get a big batch under the screen) But first I used a vacuum to suck out as much of the seltzer as I could. Then I put it in rice for about 30 hours.
Sent from my Atrix 2 using Tapatalk...
cyberstoic said:
I always thought rice, particularly instant rice because it is so absorbent, or any dessicant was a good strategy.
On the other hand, hair dryers seem a very bad idea. Heat from the dryer can be damaging, but the real damage from a hair dryer is that is sends the air at a strong velocity and it blows the water further in the device.
Click to expand...
Click to collapse
What about the dirt in the rice? If you use rice to dry those water inside, the dirt with rice will melt with the water inside and make damage to your elements.
If you use hair dryer in a proper way, it can dry your water inside without causing any damage. Have seen after-sale repair workers do this many times.
CCpotter said:
If you use hair dryer in a proper way, it can dry your water inside without causing any damage. Have seen after-sale repair workers do this many times.
Click to expand...
Click to collapse
Did you read my response at all? While it is possible for the hair dryer to fix the problem, it can also cause the problem to remanifest itself if that humid air doesn't actually leave the casing. That is the point of the rice. Dirt in the rice is irrelevant. We aren't talking about that much water, and the phone is still in its casing. The rice is just removing the moisture from the air.
Still works but the screen is foggy and flickers alot.
A friend of mine was telling me that something in the batter triggers and sprint can tell if it had water damage or not. How can i tell and look for that?
I also want to take it in but dont want sprint finding out about the water damage. Is there a loophole?
Shifted from my EVO
Well first things first. Turn it off, pull the battery. Do not try to restart it. You have several choices to dry it out. One really and proven one is rice. Fill a container half way with rice. Then stick your phone in the rice with the battery out, and the cover off. Push it down into the rice, and let it stay there for at least two days in a warm dry place. The other was actually used by a member here on XDA. He used is a Dehydrator. Not sure of the details, but it definately worked. I'd say set it on low and leave it there for at least 24hrs. Sprint can tell if the phone has been dropped in water by checking the water damage indicators. On the phone itself, and the battery. They're Red checkered squares. They turn bright Red when dropped in water. Although it has been proven they're not very reliable.
^^ is correct about the indicator on the battery. Its a little sticker and i always pull it off and take it to them. Once they asked me about the sticker and i just told them i have no idea what your talking about and that i didn't know about any sticker. Playing dumb helps
Take battery out....Stick it in oven on warm heat...take it out after 10 minutes to let it cool down.....repeat like 4 times.....
Sounds freaky but i fixed an iPod Touch and a Droid X with this method
Thanks for the replies guys. I ended up using a hair dryer on heat. It's not that bad of a condition. Everything seems to work properly (so far). This would happen when a ICS beta ROM comes to our phones... -_-
is there any other indications that sprint would be able to tell if it had water damage?
Enraged21 said:
is there any other indications that sprint would be able to tell if it had water damage?
Click to expand...
Click to collapse
Nope, unless there is still water in it when you take it there, oh and don't use a hair dryer, all that does is "push" water in deeper through all the electrical wiring and circuits, plus it can melt parts of the device
Personal expierence lol
notsointeresting said:
Nope, unless there is still water in it when you take it there, oh and don't use a hair dryer, all that does is "push" water in deeper through all the electrical wiring and circuits, plus it can melt parts of the device
Personal expierence lol
Click to expand...
Click to collapse
+1 to not using the hairdryer . It will not work as well as you think. There's a good chance that you still have moisture in the device.
See I wouldn't have known that lol. Thankss!
Why we're here.