My son was using his rooted NC and I had signed in my profile on it as well. It had credit card information on it and thru t app store he charged up my card I tried to delete some profiles and now i'm back NC Barnes and noble registration and when trying re register it says error registering device.. Not sure if because it is rooted but can someone throw me a bone.. Most appreciated..
WaterSoldier said:
My son was using his rooted NC and I had signed in my profile on it as well. It had credit card information on it and thru t app store he charged up my card I tried to delete some profiles and now i'm back NC Barnes and noble registration and when trying re register it says error registering device.. Not sure if because it is rooted but can someone throw me a bone.. Most appreciated..
Click to expand...
Click to collapse
You will have to install unrooted B&N ROM and register... then re-root it... I have instructions on how to modify B&N stock to be flashable via CWM in the Customizing ROMs thread in my signature... Leapinlar has a flashable 1.4.3 in his tips thread... make sure after you flash stock back you go through the unregistering/return to stock on it... then boot it back up and register it.
DizzyDen said:
You will have to install unrooted B&N ROM and register... then re-root it... I have instructions on how to modify B&N stock to be flashable via CWM in the Customizing ROMs thread in my signature... Leapinlar has a flashable 1.4.3 in his tips thread... make sure after you flash stock back you go through the unregistering/return to stock on it... then boot it back up and register it.
Click to expand...
Click to collapse
Wow.. I read the customize rom page and that's some seriousness there.. no other way to return it to a stock NC any know of?
WaterSoldier said:
Wow.. I read the customize rom page and that's some seriousness there.. no other way to return it to a stock NC any know of?
Click to expand...
Click to collapse
Sure, just go to my tips thread as DizzyDen suggested. It is linked in my signature. There is a section on how to make the CWM bootable SD (item A10). And there is a link (item A12) to my modified stock 1.4.3 rom that can be flashed with that CWM SD. Do a factory reset with CWM before flashing the rom. Takes you completely back to unrooted stock.
Or if you still have the stock recovery on internal memory you can do an 8 failed boot reset. See my item A12.
leapinlar said:
Sure, just go to my tips thread as DizzyDen suggested. It is linked in my signature. There is a section on how to make the CWM bootable SD (item A10). And there is a link (item A12) to my modified stock 1.4.3 rom that can be flashed with that CWM SD. Do a factory reset with CWM before flashing the rom. Takes you completely back to unrooted stock.
Or if you still have the stock recovery on internal memory you can do an 8 failed boot reset. See my item A12.
Click to expand...
Click to collapse
Thank you.. appreciate the help fellas...
Related
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
mrkkk said:
Nook was running cm7
I went here http://forum.xda-developers.com/showthread.php?t=958748 and downloaded recoveryfix.zip and installed it
that was silly
now nook is stuck at book
How can I reflash cwm 3.0.2.8?
Click to expand...
Click to collapse
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Make yourself a bootable CWM card by following the directions HERE
Then download the attached file that goes with your stock OS version, and put it into the root of the CWM card.
Boot the device with that card, and flash the file. Remove the SD card when done, and reboot. You should now be back into your CM7. At this point to can flash CWM back onto the NC, or leave it off.
GMPOWER said:
Do you remember what version of the stock OS you had before you installed CM7? What happened, was that file that you downloaded is specific to a version of the stock OS.
Click to expand...
Click to collapse
Any way to determine that now?
mrkkk said:
Any way to determine that now?
Click to expand...
Click to collapse
Not really, the version 1.1.0 update came out at the end of January, and the guide that you linked to was made in February, so I would say that there is good chance that you were not on version 1.1.0. I would start with the 1.2.0 package, and work my way down.
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
mrkkk said:
No luck
Got meself a monster root pack - http://code.google.com/p/monster-rootpack/downloads/list
1.2.0 and 1.1.0 gave me install failed after rebooting
1.0.1 its still stuck at "Touch the future of reading"
Dont I want to flash a good copy of CWM back so that it can boot cm7?
Click to expand...
Click to collapse
The NC does NOT need CWM installed on the device to install or run CM7. A lot of people don't install it because of problems like this. I just did a restore of my CM7 image, and took the same steps as you. When it reboots and says install failed, I just shut it down and restarted right back into CM7.
The problem with the package that you had started with was the fact that besides the recovery files it installed a version of u-boot.bin that does not seem to be compatible with your device. The packages that I put up include each version specific u-boot.bin and recovery files.
I would flash the 1.2.0 file again, this time when it restarts and says install failed, just reboot the device, and it should go into CM7. At the very least, at this point you could do a full factory restore.
Update
before seeing your last message I built cwm 3.2.0.1 card using http://www.techerrata.com/dl.php?path=15&file=1gb_clockwork-3.2.0.1-eyeballer.zip
downloaded cm7 latest nightly
flashed it
applied titanium backup
was up in about an hour
BTW I do like CWM recovery, I can take nandroid backups time to time
Thanks for helping
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
grrmisfit said:
I deleted my build.prop but forgot to rename backup before rebooting. It starts up with initial cynageon text but it hangs there and never makes it to boot animation. Tried to load SD card on phone to rename but I can't see any system folders. Where to go from here?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
re-flash the version of CM7 you were running again.
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
grrmisfit said:
now im getting bootloop tried booting into recovery but after i confirm recovery it goes thru the some steps then says shutting down . btw this is all on SD the internal memory is untouched
Click to expand...
Click to collapse
You are using SASD's recovery mode and not CWR... right?
dont know what sasd is i have an sdcard with cwr on it. if my nook isnt rooted will doing a data erase erase nook files or just ones cyna made?
ok did some reading yes i do have a sasd. shouod i do s device reset via cwr? or will thie reset my nooks interal files
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
BoomKaput said:
Make a bootable cwm sd card and reflash your rom. Instructions are here: http://forum.xda-developers.com/showthread.php?t=949699
Click to expand...
Click to collapse
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
OP, words of advice.
1. Do CLEARLY indicate you are intending to run CM7 off uSD or booting from eMMC.
If you NOT, other members tend to give you advice that not your intention to do.
2. Read the instruction from verygreen. Do make sure you understand what it's for.
Link: http://forum.xda-developers.com/showthread.php?t=1000957
I went thru all the install steps twice and still get boot loop. I ran cm7 for months fine till i oops on my build.prop
DizzyDen said:
He's running from verygreen's SASD... so his stock is still stock.
Do NOT use cwr with that version... you need to use verygreen's built in recovery mode to update the uSD install.
Click to expand...
Click to collapse
Ahhh, sorry did not realize that.
BoomKaput said:
Ahhh, sorry did not realize that.
Click to expand...
Click to collapse
NP... I just wanted to make sure I got the info to him about it before he tried CWR is all.
I un rooted and returned back to 1.0.1 because im handing my nook over to my wife. I went to b&n site downloaded the update file and followed all directions to manually update. Waited all day yesterday and the nook still hasn't seen the file on the sdcard. Can the color be directly updated from 1.0.1 to 1.4.1 or am I doing something wrong?
Did you perhaps end up with CWR on your eMMC? To check, boot into recovery and see if CWR comes up. If it does, you cannot update and will have to get rid of CWR.
I dont believe so but ill check. Thanks
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
For future use... download the CWM flashable 1.4.1 I posted in the return to stock thread.
davwman said:
Had to recreate cwm sdcard, flash 1.2 then flash 1.4.1 through cwm. Thanks.
Click to expand...
Click to collapse
hey i have the same problem can u tell me where u got the 1.2 update?
ellemoe said:
hey i have the same problem can u tell me where u got the 1.2 update?
Click to expand...
Click to collapse
If you want to just install the latest stock rom on your device, go to my NC tips thread linked in my signature. Look at item A15.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Hi,
I was wondering if there was a way to restore my tablet to absolute factory settings......i have ClockwordMod and thors ICS build installed. I need factory like factory unrooted rom and also all personnel files gone along with clockworkMod gone. I need this done so i can send it to acer. I dont want to find out what will happen if they see its rooted and junk.
Moscow Desire said:
Easiest way is to copy a stock rom on your ext SD card. You can get one in vaches thread ' full packages' in the dev forum.
Then boot to recovery. Do wipes. Go to recovery and restore and toggle data/media. Then go to mounts and storage and do full formats.
This will format everything in internal memory.
Then flash the stock rom.
Click to expand...
Click to collapse
+1 i would flash an old stock rom than get the ota update or just flash a stock rom....a bit off topic but what do you think acer would do if you sent in a rooted tablet?
gears177 said:
+1 i would flash an old stock rom than get the ota update or just flash a stock rom....a bit off topic but what do you think acer would do if you sent in a rooted tablet?
Click to expand...
Click to collapse
Most cases nothing. Although technically they could charge you. Considering all the bricked tabs on the first ics update, I'm sure they don't bother looking.
thanks for all the help. I was able to flash to a stock rom!
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
submandingo said:
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
Click to expand...
Click to collapse
if you changed your bootloader to run ics you probably need to switch back stock HC bootloader:good:
submandingo said:
I did these steps and must have made a mistake on the rom and now I am bootlooping. Any advice on how to restore back to factory would be appreciated
Click to expand...
Click to collapse
You will need your UID
Download the following file
EUUs_SBK_Acer_A500_1.016.05_COM_GEN1.zip
You will have to search to find it.
Then follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=1516012
Don't use the Timmydean version as it is rooted and doesn't have the stock recovery use the file you downloaded.
This will return you to stock.
yes i read before posting. first let me tell you wut i did.
1) installed schizoid pac rom on nook color......
2) as per instructions i formatted system and cache.
3)flashed rom
4)worked slow but fine. decided this rom isnt worth keepin on.
5)as per instructions when transferring from these types of roms to any other 10.1.x roms i formatted system/cache again
^^^^^^^^^^^^^^^^^this last step broke my clockwork recovery. :crying:
----now i am unable to boot after rom,gapps flash.
----receive following messages when cwm is pulled up
-----E:\ unable to mount system, cache and all the other ones that u can manually mount and dismount via cwm
so i can flash jus not boot up.
tried flashing stock image .zip for a stock recovery via sd boot and i get passed *read forever* and then i hit the big gigantic "n" with copywrite details and such but won't go passed that screen.
wanted to try the adb restore thingy but i need to be able to boot up the nook to enable debug right? so i can't do that......unless im stupid which quite possibly is the case. i had a moment complaining about kit kat earlier and am sorry so if i can't get help i understand. thx guys
newbtrigger69 said:
yes i read before posting. first let me tell you wut i did.
1) installed schizoid pac rom on nook color......
2) as per instructions i formatted system and cache.
3)flashed rom
4)worked slow but fine. decided this rom isnt worth keepin on.
5)as per instructions when transferring from these types of roms to any other 10.1.x roms i formatted system/cache again
^^^^^^^^^^^^^^^^^this last step broke my clockwork recovery. :crying:
----now i am unable to boot after rom,gapps flash.
----receive following messages when cwm is pulled up
-----E:\ unable to mount system, cache and all the other ones that u can manually mount and dismount via cwm
so i can flash jus not boot up.
tried flashing stock image .zip for a stock recovery via sd boot and i get passed *read forever* and then i hit the big gigantic "n" with copywrite details and such but won't go passed that screen.
wanted to try the adb restore thingy but i need to be able to boot up the nook to enable debug right? so i can't do that......unless im stupid which quite possibly is the case. i had a moment complaining about kit kat earlier and am sorry so if i can't get help i understand. thx guys
Click to expand...
Click to collapse
Go to my NC partition repair thread linked in my signature and flash the repair and format zips. That should then let you put any ROM you want back on it, including stock.
You may have to go to my NC Tips thread to make a bootable recovery SD first though.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Go to my NC partition repair thread linked in my signature and flash the repair and format zips. That should then let you put any ROM you want back on it, including stock.
You may have to go to my NC Tips thread to make a bootable recovery SD first though.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thx, will try when i get off work. again thx for the response
GENIUS!
GENIUS!:highfive: