Database Users

Trying to ODIN back to stock...

but its stuck on this:
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
and its been like this for the past five mins.... what should i do?

Try again but first put all the files into odin first before connecting your vibrant to odin, that usually helps.
And also if you get a Caution sign with a computer or something like that then your fine.
Its just like another download mode.
Just proceed to what i told you to do.

i tried it but this is what comes up now:
<OSM> All threads completed. (succeed 0 / failed 0)
and thats all

Do you have both the .pit and .tar file?
EDIT: also what rom were youcoming from?

ok now its saying the exact thing it said the first time and its not going past that. what do i do now?

aaronhiep said:
Do you have both the .pit and .tar file?
Click to expand...
Click to collapse
yes. now its stopping at the DO NOT TURN OFF TARGET message again
edit: CM7

Don't use the pit.
Sent from my SGH-T959 using XDA Premium App

alecjake said:
ok now its saying the exact thing it said the first time and its not going past that. what do i do now?
Click to expand...
Click to collapse
Are you going to stock JFD firmware? Maybe try downloading the .tar file again. May be a bad download.

alecjake said:
yes. now its stopping at the DO NOT TURN OFF TARGET message again
edit: CM7
Click to expand...
Click to collapse
There might be a different way them..i dont really know, never tried cm7.

ewidtfeldt said:
Don't use the pit.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
like just remove it so i only have the .tar?

jneal9 said:
Are you going to stock JFD firmware? Maybe try downloading the .tar file again. May be a bad download.
Click to expand...
Click to collapse
yes stock JFD. alright i'll try redownloading it. thanks

alecjake said:
like just remove it so i only have the .tar?
Click to expand...
Click to collapse
Yes, i thnk thats what he is saying.

this is what i got without the pit file:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 1684)
<OSM> All threads completed. (succeed 0 / failed 1)

nevermind. i think i got it working! thank you everyone who helped

now that this is done, does it just mean that i am running a stock rom or am i unrooted now?

^ please read my guides... signature.

[Q] Unusual brick

i was installing an app from google play. And suddenly my galaxy y's screen got hanged the display was stuck at same frame for like 15-20 minutes.
So i pulled out the battery, inserted battery again and powered on the phone. But it was stuck at samsung boot logo.
So i Entered Into CWM mode and i tried to wiped data. But it said "error mounting/data!"
So i Go into advanced mode And select mount /data but i got same error again
So finnaly i tried to install new custom rom(hyperion latest preview edition)(previously i was using jellyblast 3)I successfully installed rom without errors but it was also stuck at boot logo. I tried to wide data in stock recovery too but got the same error"cant mount data"
Now i'm totally stuck. I cant flash stock rom from odin too.... it also shows error.....
what to do now please help me

Flash a stock rom via odin
Edit
what error did you get while flashing a stock rom?

amal das said:
Flash a stock rom via odin
Edit
what error did you get while flashing a stock rom?
Click to expand...
Click to collapse
This Error-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u r stuck on splash image or the bootanimation?

hell_lock said:
u r stuck on splash image or the bootanimation?
Click to expand...
Click to collapse
Splash Image

anant_6 said:
This Error-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try another version of Odin and stock

amal das said:
Try another version of Odin and stock
Click to expand...
Click to collapse
i have already tried 2 versions of odin and 3 versions of stock

TRY FLASHING ANY stock KERNEL USING NON ODIN METHODS

hell_lock said:
TRY FLASHING ANY stock KERNEL USING NON ODIN METHODS
Click to expand...
Click to collapse
tried installing this kernel http://www.mediafire.com/?2o40bhqa6dfnfzt using mai77's method, it said install from sdcard complete
but still stuck at splash screen :crying:

anant_6 said:
tried installing this kernel http://www.mediafire.com/?2o40bhqa6dfnfzt using mai77's method, it said install from sdcard complete
but still stuck at splash screen :crying:
Click to expand...
Click to collapse
Is that a stock kernel?
Sent from my GT-S5360 using XDA

use flashable stock rom...

hell_lock said:
Is that a stock kernel?
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
yes that's stock kernel
explodeaamir said:
use flashable stock rom...
Click to expand...
Click to collapse
yeah i tried that too same thing installation successful but still stuck at splash screen

odin with repartition option checked?

kurotsugi said:
odin with repartition option checked?
Click to expand...
Click to collapse
yeah i tried that but it says installation failed .
anyways thanks for help guys. I tried everything but can't fix it ...
So i will give it to Samsung service center tomorrow i hope they will fix it ...

[Q] Cannot unroot/unbrick my SM-N9005 on bobcat rom 4.4

Hi there....
i rooted my Note 3 LTE SM-N9005 and had it flashed with bobcat rom 4.4. then i had dropped my phone and having some issues with screen. Now i need to flash it with custom rom. I hope I've done everything as per instructions to odin the phone using the default stock rom N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar (Bought the phone from Dubai, UAE; my friend's phone is with the same firmware which was bought in the very same outlet)
But when i try to unroot it, everything goes good till finally the left upper box turns red and says "FAIL!" following is the progress i do get during unroot process.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I don't have an idea on what should have gone wrong here. Tried not less than 10times using different Odin versions too, but still the result was same.
Guys, Please give me hand to get my phone back to life. I cannot boot my phone now. another custom rom in my internal memory but cannot boot into recovery either. What should i do? is there any other way to unroot/unbrick my precious (for me) mobile.?
Thanks in advance for all your time and effort put to save my ass.

Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk

Dahdoul said:
Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.

mhrdeena said:
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.
Click to expand...
Click to collapse
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk

delega cattrit
Dahdoul said:
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.

mhrdeena said:
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.
Click to expand...
Click to collapse
MEGA Link for you

Bricked while trying to root

OK my problem is i tried to root my s4 using the I337_NC1_Stock_Kernel.tar.md5 in odin.. when flashing to my phone it bricked the phone.. I have tried using odin to reflash the stock firmware to my phone with little luck. I don't really know alot about these phones. I have tired a lot of things with little luck. I have downloaded the pit file and tried using it also alone with the firmware. i am not really sure were to go from here.. I am open to any help
Thanks!

How does using a stock firmware via Odin lead to root? Pit file? Your post can't be real...
Sent from my iPad using Tapatalk

Jleek0151 said:
OK my problem is i tried to root my s4 using the I337_NC1_Stock_Kernel.tar.md5 in odin.. when flashing to my phone it bricked the phone.. I have tried using odin to reflash the stock firmware to my phone with little luck. I don't really know alot about these phones. I have tired a lot of things with little luck. I have downloaded the pit file and tried using it also alone with the firmware. i am not really sure were to go from here.. I am open to any help
Thanks!
Click to expand...
Click to collapse
Are you flashing the nb1 tar file in Odin to return to stock?
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 5 using XDA Free mobile app
---------- Post added at 07:23 AM ---------- Previous post was at 07:20 AM ----------
cantenna said:
How does using a stock firmware via Odin lead to root? Pit file? Your post can't be real...
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
The post is real. He tried to flash the nc1 kernel. You need that to use towelroot. He shouldn't be using a pit though.
Sent from my Nexus 5 using XDA Free mobile app

Sorry a little confusion. When i tried to flash the file into my phone it failed and bricked my phone. When i tired to Install the stock firmware back on the phone i tired using the pit file like i read in other forms. I don't know much about all the stuff i was just doing what i read that helped other people. Anytime i try to flash any files onto my phone it fails. What im asking is what do i need to do to fix the brick problem. Im not sure if now the kernel file on my phone is missed up now? Do i need to try and flash a actual stock kernel file? I have also read that sometimes the Download mode on the phone gets corrupt and causes file not to flash. Before i started having problems i had 4.2.2 downloaded. I will have a video up shortly showing what im doing in odin with the files.
Thanks

I am downloading this ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_ low_ship_MULTI_CERT.tar.md5 file now.. I will try and flash this onto my phone next and see what that does.. I will use v3.09 of odin also. Is there anything else i should try first before i do this? Im not 100% sure what the difference is between this file and the stock firmware i was using before.
here is the video /watch?v=VWvDj16mA_U&feature=youtu.be
Thanks

Add y o u t u b e . C o m in front of the link.
Sent from my iPhone using Tapatalk

File goes in AP slot in Odin.

I think I was wrong also. I had the newest update that was over the air so that would of been 4.4.4. Is this why I'm having the issues. Is my bootloader locked for good now?
Sent from my iPhone using Tapatalk

Jleek0151 said:
I think I was wrong also. I had the newest update that was over the air so that would of been 4.4.4. Is this why I'm having the issues. Is my bootloader locked for good now?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You're bootloader was always locked for good. All i337's from day one were. But that's not the issue. Have you flashed the nb1 tar file in Odin? That should work. You're still on a version where you can root and use safestrap.
Sent from my Nexus 9 using XDA Free mobile app

I believe so it always said fails. Goes to "getting pit file for mapping and then fails"
Sent from my iPhone using Tapatalk

Jleek0151 said:
I believe so it always said fails. Goes to "getting pit file for mapping and then fails"
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Ok, I'm old school so let's start from scratch and rule out a hardware issue. Google Odin 1.85 xda and install that on your pc. Then download the stock Odin tar file from here http://forum.xda-developers.com/showthread.php?p=50912149 edit, if you've download it once before, re-download it
Open Odin on your pc. Then boot into download mode on your device and connect it to your pc. Then run the nb1 tar file in the PDA slot of Odin.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Ok, I'm old school so let's start from scratch and rule out a hardware issue. Google Odin 1.85 xda and install that on your pc. Then download the stock Odin tar file from here http://forum.xda-developers.com/showthread.php?p=50912149 edit, if you've download it once before, re-download it
Open Odin on your pc. Then boot into download mode on your device and connect it to your pc. Then run the nb1 tar file in the PDA slot of Odin.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok im Downloading all the files now.. The files aren't like anything that i have now.. So it will be around an hour before its done.
Thanks a lot I hope it works.

jd1639 said:
Ok, I'm old school so let's start from scratch and rule out a hardware issue. Google Odin 1.85 xda and install that on your pc. Then download the stock Odin tar file from here http://forum.xda-developers.com/showthread.php?p=50912149 edit, if you've download it once before, re-download it
Open Odin on your pc. Then boot into download mode on your device and connect it to your pc. Then run the nb1 tar file in the PDA slot of Odin.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am downloading the stock 4.4 .tar file is the one you are talking about ?

Jleek0151 said:
I am downloading the stock 4.4 .tar file is the one you are talking about ?
Click to expand...
Click to collapse
If you're downloading it grim the link I gave you, then yes it's the one I'm talking about
Sent from my Nexus 9 using XDA Free mobile app

Alright this is what odin saids when i try to flash anything
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
now this isnt the file im downloading, but this was suppose to be a all in one .tar file for nb1.

Jleek0151 said:
Alright this is what odin saids when i try to flash anything
I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
now this isnt the file im downloading, but this was suppose to be a all in one .tar file for nb1.
Click to expand...
Click to collapse
Ok, Odin can be finicky so don't give up yet. Try different usb ports, 2.0 not 3.0, use the ones in this back of your pc and cables.
Sent from my Nexus 9 using XDA Free mobile app

Alright will do! Once the file downloads I'll switch cables and try a different port. I have used the same one from the beginning.
Sent from my iPhone using Tapatalk

Ok after switching cables and ports and using the old file it got a bit farther but still failed..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on the phone itself in red says SW REV. CHECK FAIL : FUSED :5. BINARY :1

Jleek0151 said:
Ok after switching cables and ports and using the old file it got a bit farther but still failed..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on the phone itself in red says SW REV. CHECK FAIL : FUSED :5. BINARY :1
Click to expand...
Click to collapse
Ok, fused 5 binary 1 just shows you're on the 4.4.4 bootloader. The nb1 tar will work. Keep trying
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
ok, fused 5 binary 1 just shows you're on the 4.4.4 bootloader. The nb1 tar will work. Keep trying
sent from my nexus 9 using xda free mobile app
Click to expand...
Click to collapse
ok im unzipping the file now ill keep you posted.
Thanks!!

[HELP] Galaxy S4 GT-I9506 Bootloop

I just recently unrooted my device and tried to make a fresh new start
I came into Recovery , wiped cache and after that wiped user data (Factory Reset)
i tried to reboot it , still via recovery, but now it's stuck on boot. (Samsung logo with the little circles just being there...)
Since I'm total noob at this , what can i do to finally boot my device ?
Thanks

Reflash official stock rom using odin. This will erase everything and you will need to start from scratch. PM me for help using odin
Sent from my MotoG3 using XDA-Developers mobile app
---------- Post added at 05:28 PM ---------- Previous post was at 05:27 PM ----------
You could also only reflash the boot partition using adb...
Sent from my MotoG3 using XDA-Developers mobile app

It's really a dumb question ,but i'll ask anyway. I recently damaged my usb cable , it doesn't work now. I charge my mobile with these Samsung chargers , where you can't pull out the usb cable
So is there a way to do it without connecting my device to PC ??

.kyon said:
It's really a dumb question ,but i'll ask anyway. I recently damaged my usb cable , it doesn't work now. I charge my mobile with these Samsung chargers , where you can't pull out the usb cable
So is there a way to do it without connecting my device to PC ??
Click to expand...
Click to collapse
Unless you manage to boot the phone, no.

GDReaper said:
Unless you manage to boot the phone, no.
Click to expand...
Click to collapse
I have managed to finally obtain a USB cable, but i really can't find a STOCK ROM for my device. I have been reading.. I have found that you need special stock rom due to your carrier so you can call etc.
Is it true ? If so -- i would have to search for "Samsung Galaxy S4 GT-I9506 Czech Republic T-Mobile Stock rom" ?
Thanks.. (i can't find it..)

.kyon said:
I have managed to finally obtain a USB cable, but i really can't find a STOCK ROM for my device. I have been reading.. I have found that you need special stock rom due to your carrier so you can call etc.
Is it true ? If so -- i would have to search for "Samsung Galaxy S4 GT-I9506 Czech Republic T-Mobile Stock rom" ?
Thanks.. (i can't find it..)
Click to expand...
Click to collapse
Only if it is carrier locked

GDReaper said:
Only if it is carrier locked
Click to expand...
Click to collapse
How can i check that ?

.kyon said:
How can i check that ?
Click to expand...
Click to collapse
Does it work with other Sim cards?

GDReaper said:
Does it work with other Sim cards?
Click to expand...
Click to collapse
Oh i get it now.. stupid me.
I just downloaded a stock rom, so im going to try it.

GDReaper said:
Does it work with other Sim cards?
Click to expand...
Click to collapse
Im flashing the rom quite some time (over 3hours)
and it seems to be stuck in odin..
here is the actual log :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOK1_I9506OXXDOK1_I9506XXUDOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4

.kyon said:
Im flashing the rom quite some time (over 3hours)
and it seems to be stuck in odin..
here is the actual log :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOK1_I9506OXXDOK1_I9506XXUDOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
Click to expand...
Click to collapse
Make sure the connection between the phone and the PC is stable.
Playing around with the phone might briefly disconnect it.
It could also be caused by the cable. Odin is sensitive in this sense and it is possible to not work unless you use an original Samsung cable.

GDReaper said:
Make sure the connection between the phone and the PC is stable.
Playing around with the phone might briefly disconnect it.
It could also be caused by the cable. Odin is sensitive in this sense and it is possible to not work unless you use an original Samsung cable.
Click to expand...
Click to collapse
I tried it several times over the course of 2 days , leaving the phone and PC alone , while in school , while i sleep and everytime it just FAILs
i noticed a SS_DL.dll in my rar with the stock rom (from sammobile)
Could it be my problem ? If it isn't the problem (the .dll)
i'll post exactly how i try to flash it, so you can help me - if i am doing anything wrong..
Thanks

.kyon said:
I tried it several times over the course of 2 days , leaving the phone and PC alone , while in school , while i sleep and everytime it just FAILs
i noticed a SS_DL.dll in my rar with the stock rom (from sammobile)
Could it be my problem ? If it isn't the problem (the .dll)
i'll post exactly how i try to flash it, so you can help me - if i am doing anything wrong..
Thanks
Click to expand...
Click to collapse
I told you, Odin is very sensitive.
It can fail because of the cable.
It can fail because of the USB ports.
It can fail because of Windows version.
And it can fail because of Odin version.

GDReaper said:
I told you, Odin is very sensitive.
It can fail because of the cable.
It can fail because of the USB ports.
It can fail because of Windows version.
And it can fail because of Odin version.
Click to expand...
Click to collapse
Ok thanks for the advice, but what about the .dll part ? Is it neccessary or it is in the .rar just "because" ?

.kyon said:
Ok thanks for the advice, but what about the .dll part ? Is it neccessary or it is in the .rar just "because" ?
Click to expand...
Click to collapse
You're supposed to have a .tar files, not rar file.

GDReaper said:
You're supposed to have a .tar files, not rar file.
Click to expand...
Click to collapse
I downloaded a .rar package from sammobile.com
EXTRACTED the .rar to my desktop
the rar contained these 2 files :
I9506XXUDOK1_I9506OXXDOK1_I9506XXUDOJ2_HOME.tar.md5
&
SS_DL.dll
The file i put in ODIN (The AP box) is the .tar one

.kyon said:
I downloaded a .rar package from sammobile.com
EXTRACTED the .rar to my desktop
the rar contained these 2 files :
I9506XXUDOK1_I9506OXXDOK1_I9506XXUDOJ2_HOME.tar.md5
&
SS_DL.dll
The file i put in ODIN (The AP box) is the .tar one
Click to expand...
Click to collapse
Any ideas about .dll ? Or explanation what it is doing there ? Thanks

.kyon said:
Any ideas about .dll ? Or explanation what it is doing there ? Thanks
Click to expand...
Click to collapse
Why are you so obsessed about that dll file?
There's nothing you can do with it, Odin can flash ONLY tar files.
I told you the most common reasons Odin fails, and none of them are a dll file.

GDReaper said:
Why are you so obsessed about that dll file?
There's nothing you can do with it, Odin can flash ONLY tar files.
I told you the most common reasons Odin fails, and none of them are a dll file.
Click to expand...
Click to collapse
Obsessed, well yea thats true I just thought it may be reason why it fails
Let me try it few more times.

Hi, I have this exact same problem. I came from a custom rom (Aurora) and tried to flash stock but whichever stock I use via Odin (which succeeds and reboots etc) I just end up back at the Samsung screen with blue sparks. I've left it there for 15-20 minutes and it just stays. Very sad Look forward to seeing if you find a fix