Last night I tried to put a new ROM on my HTC touch2/Mega.Everything went good,but when I tried to start my phone,It appeared HTC start screen and remains blocked on that start screen,the Windows not startWhat I can do now,to make my phone to start WM?Please,help me:crying:Sorry for my english,I don't know this language very well
Have u try to hard reset it and at first boot soft reset?
Sent from my HTC Tattoo using XDA
Related
I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
errr....you got xda exec????
emm....exec is under universal...not alpine....anyway...which rom you use when upgrading ???
sayekm said:
I have the O2 XDA EXEC and just done the the upgrade sucessfully.
I was now trying to install the extra software clearview PDF.
Disaster struck me down, as i was installing it the installation got stuck at the end for a good few minutes so i decided to disconnect and reinstall it.
After a soft reset the the XDA will no longer go past the first splash screen which also displays all the rom details.
I have tried to reinstall the fresh ROM agian and again but the PC will not recognise the USB device.
PLEASE HELP AS I AM REALLY STARTING TO PANIC
Click to expand...
Click to collapse
restart your pc and connect to your exec , try to flush rom agian , you should be ok
Okay, this is the story;
I have a HTC P4350, no problems, had a couple of themes in the past couple of days. Now I installed HTC Home, nd softresetted. Next thing, I wanted to boot my HTC, now it won't go further then the windows mobile screen! It just goes back to HTC -> Windows again the whole time!
Please help me out, is there a way to fix this!?
try a hard reset, this can usually be done with a combination of hardware keys (it's prob in the wiki.)
If that doesn't work try entering bootloader and flashing new/original rom.
Do a soft reset by holding down left and right softkeys. It will format the internal memory of the device and it will return to factory defaults.
Hi All,
Got me a P3400i a few days ago, and tried the usual trick of hard reset, followed by soft reset to get a clean vanilla WM6 setup, without all the HTC Custom stuff, but the phone just goes back to the main screen with "Tap here to setup your Windows Mobile device"
Have any of you encountered this as well?
Is there any other sequence to be followed to get RID of all the HTC stuff in the extROM?
jamichy said:
Hi All,
Got me a P3400i a few days ago, and tried the usual trick of hard reset, followed by soft reset to get a clean vanilla WM6 setup, without all the HTC Custom stuff, but the phone just goes back to the main screen with "Tap here to setup your Windows Mobile device"
Have any of you encountered this as well?
Is there any other sequence to be followed to get RID of all the HTC stuff in the extROM?
Click to expand...
Click to collapse
I think improper extROM setup may cause a bad battery drain
SOLVED
Sorry, my bad....
It seems I had to do the soft reset before the customisation started. Its working fine now
Hard-resetting...... how?
I have tried pressing the reset button time and again but of no use. Problem is, my messaging option just doesn't appear. I mean, it's there, but when clicked, doesn't activate. Please help. It's been about a month since I bought the HTC p3400i
If your phone is patched or if you are ready to patch it (thus loosing your warranty), you can always get a custom rom with smaller, empty extrom. Or if you like to have the original ROM, get the original WM 6 ROM from this forum and the tool HTC ROM Image Editor, remove extrom.nb from the ROM and inject the 4 MB, empty version of extrom into it. YOu can get it by requesting any of the chefs here, including me
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset
i had done hard reset also
Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck
Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)
matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse
@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse
thasnffffffffff
Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com
gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved
Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish
It Worked
Thanxxxxxxxx
hi every body
i hope some body can help me
my friend brings me a htc hd mini that when i turn it on on the phone restart on page that show (starting windows for the first time)
i did hard reset by volume up and down and went fine but no luck
i try to onstall rom by sspl and got wendor id error
so i search according to its serial nuber and found its region and downloded its RUU that was 1.36.707 ( malasiya)
and installation went fine but again restart problem on no luck
also extract ruu and renam rom to PHOTOIMG and put on memory and installation wia download mode and went fine but same problem and phone restart
SO is it hard ware problem or there is any trik that can help to solve thist via software??
the situation of phone is restarting ( i dont know what happended for it before)