plzzz HELLLLLP I'm desperate - Vibrant General

sorry my english is bad
hello
my androide phone is bricked the phone does not start
I use the software to link with odin went to download mod
http://forum.xda-developers.com/showthread.php?t=734475 links dead
and find its http://forum.xda-developers.com/showthread.php?t=1319802
I download the file and followed the two follow tutorial
INSTRUCTIONS!
1.Your Device must be in DOWNLOAD mode to use ODIN.
2.Get your phone into Download mode by holding vol down and power.
3.THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
4.Open Odin and load each file with it's corresponding field..PIT,PDA,CSC etc. (In this case we just use the PDA and PIT)
5.Don't check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6.Hit "start"! be patient!
Click to expand...
Click to collapse
and it still does not start I always download the mod
Samsung Galaxy S Vibrant GT-I9000M 2.3.3
tx

This forum is for the t959 vibrant not the i900m
Sent from my SGH-T959 using Tapatalk 2

what does you mean? can know a fix

gendarky said:
what does you mean? can know a fix
Click to expand...
Click to collapse
Your signature states Vibrant I9000m is this the model phone you have???
If it is you will have to go to the I9000 general section to find the correct firmware. You have flashed T-959 firmware on your phone and that's why it is not booting.
Sent from my SGH-T959 using xda premium

my phone good work
I was exhausted but I'd saved my phone
my new question can you tell me which rom is best for my phone stp and how to install rom ?
my model is
Model number
GT-I9000M
Firmware version
2.3.3
Baseband Version:
I9000UGKG3
Kernel version
2.6.35.7-I9000UGKG3
[email protected] #2
Build number
GINGERBREAD.GKG3
Click to expand...
Click to collapse
tx

Okay again since you confirmed i9000m you will need to check the i9000 general se tion for roms for your phone.
Sent from my SGH-T959 using xda premium

gendarky said:
I was exhausted but I'd saved my phone
my new question can you tell me which rom is best for my phone stp and how to install rom ?
my model is
tx
Click to expand...
Click to collapse
Wrong forum; here ya go
http://forum.xda-developers.com/forumdisplay.php?f=656

tx I'll have a look
sorry for my english

Related

[With ZQKJ6 Kernel] ONLY for [I9100G] Full New Official Firmware ZQKJ6!

This is a newest firmware ZQKJ6 for i9100G... Based on the forum... this firmware capped CPU speed at 1.2Ghz instead of 1008Mhz... Kindly flash with Odin...
***I am not responsible for any damage to your phone.. Flash with own risk!***
Note : This is ONLY for [I9100G]
ZQKJ6 Firmware Donwload Link:
http://www.megaupload.com/?d=4N5EUCR7
ONLY for [I9100G] For who want flash the ZQKJ6 kernel file :
http://www.megaupload.com/?d=O4X6SIYJ
Instruction : Put the attach zImage into sdcard, then flash with HC-Ktool.
* I have noticed that the CPU clock speed something will jumped to 1200mhz more often instead of previous 1008mhz...
Pls share your notification for this Kernel...
I have post the Screen shot of the CF-Bench with this Kernel...
What do you guys think for this score?
****Sorry for the Bad English****
serge327 said:
This is a newest firmware ZQKJ6 for i9100G... Based on the forum... this firmware capped CPU speed at 1.2Ghz instead of 1008Mhz... Kinly flash with Odin.
ZQKJ6 Firmware Donwload Link:
http://www.megaupload.com/?d=4N5EUCR7
Click to expand...
Click to collapse
Is it a chinese based rom?!
Screenshot? Any more info?
xmoo said:
Screenshot? Any more info?
Click to expand...
Click to collapse
i haven try yet... but i have flash the kernel from this rom by using zimage...
version 2.3.6 ???
adivorandroid said:
version 2.3.6 ???
Click to expand...
Click to collapse
yeah u try?
This is very interesting... Beside the kernel capped at 1.2 I'm wondering what else is new? What's with the 2.36 version?
Sent from my GT-I9100 using Tapatalk

			
				
Gs2 bricked
Tried to flash this new firmware and bricked the phone:-(
Cant power on the phone .....dead! :-( Any ideas?
Try charging it for a while, then forcing it into download mode and connecting odin and flashing your original firmware back on. Or use a jig to force it into DL mode if that doesn't work, they're only a few quid on ebay.
Any new radio or kernel?
AnalogX said:
Tried to flash this new firmware and bricked the phone:-(
Cant power on the phone .....dead! :-( Any ideas?
Click to expand...
Click to collapse
This is for the i9100G as it says in the title. If you flashed it on your i9100 I'm pretty sure you are screwed.
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
AnalogX said:
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
Click to expand...
Click to collapse
Not sure, but it's worth a try.
Yes, I knew this would happen when I saw the thread open up today. The OP should edit the title for noobs so they won't flash this and brick their phone.
This is NOT a ROM for the International or non-G version, and it WILL brick your device. You'll need the service center (or jtag) to get it back if you flash this.
It wont you have briccked your phone, You will need to flash a new Kernal 1st, and even the Jig wont be able to read, as the drivers wont load. this needs deleteing before anyone else does the same thing, Guys!
No, dumb ass morons just need to read the thread title better...
interfreak said:
No, dumb ass morons just need to read the thread title better...
Click to expand...
Click to collapse
Yeah everyone needs to f****** learn to read better!!!111oneoneone /s i9100g should get its own sub forum to avoid future confusion and heartache that stems from bricking one's phone.
well after reading countless threads I have not yet gotten an answer or been pointed in the right direction. I rooted my phone recently, I tried to install CWM, then flashed another kernel as i was instructed to, now, Im stuck on the boot screen and cant get anywhere, i can although get into the downloading part of the phone, Ive been trying to locate the original stock kernel with no success. Please help before I go nuts!!
MWaV said:
well after reading countless threads I have not yet gotten an answer or been pointed in the right direction. I rooted my phone recently, I tried to install CWM, then flashed another kernel as i was instructed to, now, Im stuck on the boot screen and cant get anywhere, i can although get into the downloading part of the phone, Ive been trying to locate the original stock kernel with no success. Please help before I go nuts!!
Click to expand...
Click to collapse
Right, you're another one who don't know the difference between a Galaxy S2 and an Epic 4G. I already answered your other post do stop spamming the board.
---------- Post added at 01:01 AM ---------- Previous post was at 12:59 AM ----------
AnalogX said:
Ye that's exactly what happened :-( I didn't read carefully!!! I order the USB dongle ASAP. USB dongle will still get me back into download mode wont it?
Click to expand...
Click to collapse
U DUN GOOFED. Jig won't help, you need JTAG servicing or take it to a Samsung service center.

I think I briked the Galaxy tab 2

I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
positiveg said:
I was trying to root the device so i can get it updated from 2.2
I used Odin and tried recovery.tar file and now I'm getting a screen with a phone icon with a caution icon in the middle and a computer icon after it.
So I think I really messed it up
Any help
the thing is Odin is still connected
and no matter how much i try restarting whether in download mode or regularly same thing is still happening.
So if I can get some help would really appreciate it. I hope it can be restored
G
Click to expand...
Click to collapse
Look and see if you have recovery mode available >>> volume up+power
nopes even when I boot power + vol up/ vol dn, still get that screen
G
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
positiveg said:
nopes even when I boot power + vol up/ vol dn, still get that screen
G
Click to expand...
Click to collapse
Does Odin still see the device? If it does, try to install the stock firmware. It may take some time to find it on the net. The first place I would try is here http://www.sammobile.com/firmware/?page=3 and scroll down the page, put in your info in the drop down boxes and submit.
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that was similar
Click to expand...
Click to collapse
What is your model number?
acefsw said:
What is your model number?
Click to expand...
Click to collapse
I think he's talking about SGH-I497 ZSAAT
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
That forum doesn't really work.
Gonna see what I can do still
thanks
acefsw said:
positiveg said:
Thanks, Odin is still recognizing it
the original firmware was the ATT one
this Tab 2 has the 3G version
when I checked there I didn't see any one that
Try this http://forum.xda-developers.com/showthread.php?t=857608
Click to expand...
Click to collapse
Click to expand...
Click to collapse
positiveg said:
This is the screen I am getting on the tablet
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
acefsw said:
It is a soft brick and is recoverable. Go to here http://forum.xda-developers.com/forumdisplay.php?f=752 and read all the stickies in the general and dev sections. Apparently, you will not find an at&t rom per se, but can flash a new rom and pit, there are some very good detailed instructions available, but first read, and read some more, and some more after that. Apparently, your type of tab had signed bootloader issues, so be careful which rom you load. Also, as I have suggested with my links, go to the correct forum. I'm pretty sure you have a sgh i987, (based on the fact you were running 2.2 on at&t), and not a tab2.
Click to expand...
Click to collapse
Previous link was to the wiki, this one is to the forum. Many links will be dead and you will have to likely download the euro rom from sammobile. There is also a sticky for radio issues.
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
wan903 said:
just flash back to stock.. odin still recognize your phone.. thats what i do.. but if odin not recognize your phone, sorry i dont know..
Click to expand...
Click to collapse
Can you assist in where i can find the original ROM?
thanks
I've let the battery run down, well I think that's what happen anyway cause it's not coming on. I have it plugged into the wall but it still not coming on. But will give it a while and see.
The tablet came back on with the same screen from earlier. but now I'm looking at it it's gone off,
it feels warm but maybe it's me.
I don't know
I'm beginning to wonder about ordering a new one lol
G
positiveg said:
Thanks appreciate all the help AMD o just realise I said this forum instead of this link that you had pointed to earlier. So again thank you. I will read through it while on break and again at lunch and try and make sure I do it right. Most the rims I see at sammobile are 4.04 or above those should he ok right?
Again thanks and will let you know. Cause I got this yesterday for my wife. So.....
Sent from my HTC Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
acefsw said:
What is the serial number? The rom has to match the model, you cannot just use any samsung rom.
Click to expand...
Click to collapse
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Ok got it on charging same screen as I told you about before that I attached earlier
I've looked for the ROM suggest Euro but no luck, the links were dead
And while typing those last few words it gone back off, so i'm guessing it can only be on for say 30 mins.
If I can get the ROM and install it via Odin then I can possibly get it restarted
Thanks
G
positiveg said:
serial number R2YB51005k
model is SGH-i987
thanks it stopped coming on I realise I would plug it in it will come on then go back off not sure after how long it goes back off I know I had ti plugged in both via wall and computer.
via computer the computer did pic it up cause it showed drivers being loaded
Now no matter what I'm doing I get a black screen
G
Click to expand...
Click to collapse
Ok, as I suspectef, you have the galaxy tab, not the tab 2, hence this is the wrong forum. Go to the forum I linked to, there are some stickies about rooting, recovery soft brick, etc. My understanding is that overcome rom or p1000 should work, but you must follow whatever odin procedures, etc. they use. Chainfire has a great post up about recovering, however the file links no longer work. Go there and ask if someone has the file(s) you need. This guy lists the files he used from sammobile http://forum.xda-developers.com/showthread.php?t=996970 You will not find the files in this forum, this is the wrong forum for your device, this is for tab 2 models 31xx and 51xx, yours is a p1000 branded.

GT-i9505x Recovery

Hello, i own a 9505x not a normal 9505, and flashing the existing custom recoveries, do nothing, since i cant boot them.
The root works fine.
Since this 9505x is a demo unit, it has some software restrictions i want to eliminate, like it wont turn off the screen and will keep on playing a Samsung demo, it wont take over 20seconds videos and some other annoying stuff, i am trying to make it a retail unit.
Any suggestions ?
Why did you post this here in "Android Development"?
Can some admin post it in q and a?
Noone owns one?
same here mate!
i got my hands on a i9505X at work (with sim tray and mmc slot) but i can't deactivate demo (retail) mode. everytime you poweroff the device it wipes every change.
it tried flashed a i9505 stock rom via Odin and it fails in the modem.bin part...
i was sucesslfull at rooting the device, but now my i9505X takes ages to boot (stuck in Samsung Galaxy S4 for a while) and has no wifi
i tried almost every i9050 kernel available with no luck...
any ideas?
c2s.vdg said:
same here mate!
i got my hands on a i9505X at work (with sim tray and mmc slot) but i can't deactivate demo (retail) mode. everytime you poweroff the device it wipes every change.
it tried flashed a i9505 stock rom via Odin and it fails in the modem.bin part...
i was sucesslfull at rooting the device, but now my i9505X takes ages to boot (stuck in Samsung Galaxy S4 for a while) and has no wifi
i tried almost every i9050 kernel available with no luck...
any ideas?
Click to expand...
Click to collapse
Mate can you pull the stock recovery and send it to me? I can tell you how to unlock retail mode and the security dongle.
sedde said:
Mate can you pull the stock recovery and send it to me? I can tell you how to unlock retail mode and the security dongle.
Click to expand...
Click to collapse
i'll give it a try... can u pull your actual kernel? mine takes ages to boot the phone!
c2s.vdg said:
i'll give it a try... can u pull your actual kernel? mine takes ages to boot the phone!
Click to expand...
Click to collapse
Kernel wont do anything for you, restore it and it will be fine. Did you succeed in pulling the recovery?
Why do you need to make the demo unit work?
Sent from my Xperia Arc S using xda premium
1337RYoN said:
Why do you need to make the demo unit work?
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Its working, i just messed up the recovery mode by flashing a i9505 recovery and now i cant restore it. I want to unroot it and flash the mew firmware from kies. Thats why i need the stock recovery
Any chance you can extract the stock firmware for your GT-I9505X and upload it please. I have the same device given to me by a Samsung Rep and I stupidly tried to install the stock formware for the i9500 varient and now its had it. It loads the samsung boot screen as soon as you turn it on and then just keeps restarting every 5 seconds. Im hoping if I can get hold of the original firmware and reflash it will work! Cant find the firmware anywhere!
Sent from my GT-N7105 using xda premium
sedde said:
Kernel wont do anything for you, restore it and it will be fine. Did you succeed in pulling the recovery?
Click to expand...
Click to collapse
i'm stuck with a costum recovery as well... no luck! f**k
I'll be very grateful too , if someone can share the original firmware....
I can share it for you If you tell me how to download it from my i9505x... You better hurry as i will have to give my demo back in 2 days...
Give this a try mate. Cheers.
http://forum.xda-developers.com/showthread.php?t=633246
Sent from my GT-I9305 using xda premium
I also bricked my i9505 X. Stock Rom from i9505 does not fit to i9505X.
i9505X it's demo unit :
GT-i9505X
I9505XGSMH
PDA : I9505XXXUAMDE_LLK
Android Version: 4.2.2 – Build JDQ39
Phone does not turn on at all now, stands on live demo unit.
sorry for bad english
PiotrMmX said:
I can share it for you If you tell me how to download it from my i9505x... You better hurry as i will have to give my demo back in 2 days...
Click to expand...
Click to collapse
Any luck mate? Its gonna help a lot of people.
I9505x
Hello everyone!!!!
I have the same problem here too. Im trying to make my I9505x to work not as a Demo Unit but as an normal one.
I also couldn't Enable USB Debugging from your phone’s Android Developer Options menu because i can't find this menu. I thing thats the reason that i cant root my phone either.
So Im waiting to hear news from you...
Thanks a lot in advance!!!!!!
sedde said:
Any luck mate? Its gonna help a lot of people.
Click to expand...
Click to collapse
No luck mate... unfortunatly i'm just a normal user but not a developer... if anyone can tell me if there is a recovery file on the phone i would be able to copy it using astro file manager otherwise i will be no help to you... i've been browsing phones files and folders, copying files to my wd live hard drive but i can't find a clue...
PiotrMmX said:
No luck mate... unfortunatly i'm just a normal user but not a developer... if anyone can tell me if there is a recovery file on the phone i would be able to copy it using astro file manager otherwise i will be no help to you... i've been browsing phones files and folders, copying files to my wd live hard drive but i can't find a clue...
Click to expand...
Click to collapse
Oh no, its much more complicated than that. Anyhow thanks for considering it even.

holy crap i9500

I got a problem with the gt-i9500
There is no download mode
Volume down-home-power i will come in recovery also like up button
If i do volume up and power i'll get something with full test etc..
I got a jig usb works on my s4 but not on the gt-i9500
Got two phones
Gt-i9500 is a new one and yes it's a clone
wigwamradio said:
I got a problem with the gt-i9500
There is no download mode
Volume down-home-power i will come in recovery also like up button
If i do volume up and power i'll get something with full test etc..
I got a jig usb works on my s4 but not on the gt-i9500
Got two phones
Gt-i9500 is a new one and yes it's a clone
Click to expand...
Click to collapse
Are you sure its GT-I9500?? Because the stock phone comes with download mode.. volume down + home + power
make sure its the S4...and make sure tge combo is right
sadeshmagic said:
Are you sure its GT-I9500?? Because the stock phone comes with download mode.. volume down + home + power
make sure its the S4...and make sure tge combo is right
Click to expand...
Click to collapse
He already stated in the last part of post that it is a clone.
@wigwamradio
What do you expect? Its a clone a you know it
Sent from my Nokia 3210 LTE
marc_ecko28 said:
He already stated in the last part of post that it is a clone.
@wigwamradio
What do you expect? Its a clone a you know it
Sent from my Nokia 3210 LTE
Click to expand...
Click to collapse
Kinda missed that...my bad
sadeshmagic said:
Are you sure its GT-I9500?? Because the stock phone comes with download mode.. volume down + home + power
make sure its the S4...and make sure tge combo is right
Click to expand...
Click to collapse
There is no download mode
But there is a recovery
like wipe and factory and wipe cache but no davlik cache or advanced
it must be possible to change the clockmod?
or a boot recovery?
sadeshmagic said:
Kinda missed that...my bad
Click to expand...
Click to collapse
model; GT-i9500
fcc id a3lGTi9500
SSN -i9500GSMH
if i choose kies firmware... and if i type gt-i9500 then he ask about an s/n number so i checked in the phone put the number in but it said invalid
Sorry about my bad english
wigwamradio said:
model; GT-i9500
fcc id a3lGTi9500
SSN -i9500GSMH
if i choose kies firmware... and if i type gt-i9500 then he ask about an s/n number so i checked in the phone put the number in but it said invalid
Sorry about my bad english
Click to expand...
Click to collapse
Im sorry ...but the phone is a clone....so official firmware won't support it
wigwamradio said:
model; GT-i9500
fcc id a3lGTi9500
SSN -i9500GSMH
if i choose kies firmware... and if i type gt-i9500 then he ask about an s/n number so i checked in the phone put the number in but it said invalid
Sorry about my bad english
Click to expand...
Click to collapse
If you try to flash firmware for a REAL GT-I9500 on your clone device, it won't work, and it might even brick it, totally destroying it.
donalgodon said:
If you try to flash firmware for a REAL GT-I9500 on your clone device, it won't work, and it might even brick it, totally destroying it.
Click to expand...
Click to collapse
Hmzzzzzz okay
gone 200 euro's lolz
but i have changed the rom because the screen was freezing
but everything i do writing fails lolz
bad thing

[Q] Error Updating Galaxy Note 3 (N9005) To Android 5

I own a galaxy note 3 which it has official update yesterday , When i downloaded it and clicked install , it rebooted , When the installing page showed , it started to install , but suddenlly in 28% it had error . Please Help ME!!!!!!
Thanks
msghik said:
I own a galaxy note 3 which it has official update yesterday , When i downloaded it and clicked install , it rebooted , When the installing page showed , it started to install , but suddenlly in 28% it had error . Please Help ME!!!!!!
Thanks
Click to expand...
Click to collapse
Please Help
No one knows!!!!!!!
Sent from my SM-N9005 using XDA Free mobile app
Bumping your thread will not help.
Better explain what the error is, we're not mindreaders here nor people with magic powers who know what you did. In what state is your phone now?
Someguyfromhell said:
Bumping your thread will not help.
Better explain what the error is, we're not mindreaders here nor people with magic powers who know what you did. In what state is your phone now?
Click to expand...
Click to collapse
nice
msghik said:
Please Help
Click to expand...
Click to collapse
well you might first check if you have enough free space on your device storage.
see my screenshot as an example
Or just flash ofw from samfirmware with odin and be done with it.
It Just Write "ERROR!"
Sent from my SM-N9005 using XDA Free mobile app
msghik said:
It Just Write "ERROR!
Click to expand...
Click to collapse
Like I said earlier, download your firmware from samfirmware, flash it with odin. It's easy as pie and you won't lose your warranty cause it's official firmware, if that's what you're worried about.
How can I do it ?
Sent from my SM-N9005 using XDA Free mobile app
msghik said:
How can I do it ?
Click to expand...
Click to collapse
Sorry for a late reply,
from the top of my head: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That's for SGS3 but everything goes exactly the same for Note 3. As for the firmware files you need to register an account at samfirmware (just type it in google) and search for your model and download the package. Unzip it, inside there are two files, just ignore the small one and extract the other. Flash it accordingly to the tutorial from the link above.
EDIT: Read the tutorial and make sure you understand it before flashing! This if done incorrectly may brick your device.
Don't worry, first times always hurts;P

Categories

Resources