Hello XDA Samsung S3 users,
I just found out that in system status (settings-> about phone-> status -> last item) a new category has been added with System Status. Which changes to changed(gewijzigd in dutch) when your flash counter is 1+ or maybe kernel has been changed.
This is just a notice.
Yeah, we know and Chainfire is working on "fixing" it.
OP, do you have a USB jig to see if it can be reset???
ronj1986 said:
OP, do you have a USB jig to see if it can be reset???
Click to expand...
Click to collapse
Someone's already tried it and reported that it doesn't reset the counter.
Sent from my CM9 TouchPad
Isadora said:
Someone's already tried it and reported that it doesn't reset the counter.
Sent from my CM9 TouchPad
Click to expand...
Click to collapse
correct, my jig works for download mode but thats all
Related
If you're wondering if the USB jig works on Bell GSII... read on.
So I received my USB jig in the mail today.
First off a little background...
Bell locked, but unlocked using unsecured kernel and Helroz's Galaxy_S unlock app.
Flashed multiple custom ROMs and the last one I had was Sensation ROM by Crysis.
At boot up I was showing the nasty YELLOW triangle and showed "Galaxy S II I-9100" as opposed to "I-9100M".
The jig worked, cleared my counter and removed the yellow stain on my boot up screen, and brought me back to i-9100M.
With that said, anyone in need of an emergency USB jig fix around the GTA can use mine but of course, you'd have to meet me... I ain't driving to meet you.
Good to know it works.
I should be receiving mine soon.
Hey Guys, where did u order the USB Jig from? I'm looking at buying one for myself.
Thanks,
cue_32 said:
If you're wondering if the USB jig works on Bell GSII... read on.
So I received my USB jig in the mail today.
First off a little background...
Bell locked, but unlocked using unsecured kernel and Helroz's Galaxy_S unlock app.
Flashed multiple custom ROMs and the last one I had was Sensation ROM by Crysis.
At boot up I was showing the nasty YELLOW triangle and showed "Galaxy S II I-9100" as opposed to "I-9100M".
The jig worked, cleared my counter and removed the yellow stain on my boot up screen, and brought me back to i-9100M.
With that said, anyone in need of an emergency USB jig fix around the GTA can use mine but of course, you'd have to meet me... I ain't driving to meet you.
Click to expand...
Click to collapse
Can't wait to get mine. Its in transit. Can you comment on the steps you used to do this our provide the post link, thanks
Sent from my GT-I9100M using Tapatalk
shuweee said:
Can't wait to get mine. Its in transit. Can you comment on the steps you used to do this our provide the post link, thanks
Sent from my GT-I9100M using Tapatalk
Click to expand...
Click to collapse
Steps are very, very, VERY complicated....
1) Power Off GS2
2) Insert USB Jig
3) wait....wait for it...
4) done
reboot
Yeah you dont even power on the device. When you plug in the usb it will automatically boot your phone.
Sent from my GT-I9100M using XDA Premium App
Hey guys, can you post/PM where you ordered your JIG from, there are so many to choose from.
mine
http://www.ebay.ca/itm/ws/eBayISAPI.dll?ViewItem&item=130528351842&ssPageName=ADME:L:OU:CA:1123
avinash4 said:
Hey guys, can you post/PM where you ordered your JIG from, there are so many to choose from.
Click to expand...
Click to collapse
I can make you one on monday, im nearby.
if u accidentally brick your phone. Jig will helped a lot..
and even remove the yellow triangle..
Jig work on SGS I, SGS II.. and even works perfect on my wave..
Yellow triangle removed via usb jig.
Sent from my GT-I9100M using Tapatalk
Just received my jig today, have a question though before I pop this in.
Should I use this before installing a custom rom or after?
Does it just reset the counter? Doesn't remove the custom rom or anything right?
Phone is brand new haven't flashed anything yet.
Thanks.
why am i so lazy to purches one! i guess ill wait a till im screwed
Got mine yesterday. Worked perfect.
Should I use this before installing a custom rom or after?
After.... though you can also use it to get in to Download mode initially but not necessary since we have the button combination as an alternative
Does it just reset the counter? Doesn't remove the custom rom or anything right?
It just resets the counter, it doesn't do anything to the ROM.
The jig is only for getting into download mode and reset the counter... thats it.
Got my jig for 4$ on ebay. And got it today and voila no yellow triangle anymore!
Sent from my GT-I9100M using XDA Premium App
i dont know..whether every body knows or not..
Sammy restricted the use of JIG to reset Counter from GB 2.3.4..
So there is a patch to over come this...
Please ignore if you found.....
http://www.multiupload.com/CUNNAM2GA3
zip pass:- sgs2patch
/* Press Thanks Button if it Helps You */
OMG! No wai!!!!! They have a patch?
Intratech said:
OMG! No wai!!!!! They have a patch?
Click to expand...
Click to collapse
yeap.. i have used it and it worked after i used JIG...
its not mine BTW.. i just shared...
Dude the day they released the new bootloader is the day we figured out how they were blocking the Jig reset and made the old bootloader available for download as a separate tarball and also started to package the firmwares with the old bootloader.
You're very late. All that person has done is nothing other than recreate my work. http://www.chainfire.eu/articles/103/_SGS2_KI_Samsung_removes_USB_host_support_patches_bootloaders/
So if I flash the tar with Odin my counter will be reset to 0, without the need of a Jig? Or else?
Swyping from my I9100 via Tt
ithehappy said:
So if I flash the tar with Odin my counter will be reset to 0, without the need of a Jig? Or else?
Swyping from my I9100 via Tt
Click to expand...
Click to collapse
You need the jig. It's just the bootloader.
Intratech said:
Dude the day they released the new bootloader is the day we figured out how they were blocking the Jig reset and made the old bootloader available for download as a separate tarball and also started to package the firmwares with the old bootloader.
You're very late. All that person has done is nothing other than recreate my work. http://www.chainfire.eu/articles/103/_SGS2_KI_Samsung_removes_USB_host_support_patches_bootloaders/
Click to expand...
Click to collapse
lol..
thanks for the info...
Frankly speaking i just shared coz i have seen some guys still asking how to in q&a..
and also i made clear in my post tht if found ignore...
So Im not stealing nor breaching nor making my post count.. just shared the info thats all..
I knw people are not stupid enough to belive me or Keep on pressing my THANKS button..
peace
Seriously? People still don't know about the workaround?
EDIT: Don't worry about it.
ithehappy said:
So if I flash the tar with Odin my counter will be reset to 0, without the need of a Jig? Or else?
Swyping from my I9100 via Tt
Click to expand...
Click to collapse
after flashing the thru ODIN..
just Switch off phone...
pull the battery out..
insert the JIG..
put the battery back..
there phone goes to Download mode with counter resetting to Zero..
Lemme know if u have any issues..
Intratech said:
Seriously? People still don't know about the workaround?
EDIT: Don't worry about it.
Click to expand...
Click to collapse
What's ur point ....
am i committed suicidal mistake here...
lol.. cheers man.. i just kidding.. if u want i ll delete the post ...i dont want press any panic button here
lol
Nah, don't delete it. If people don't know then I reckon they might see this thread and find out.
You've just reminded me... I need to reset mine after playing with ICS.
... now how do I do it again, do I need a PIT file in Odin, or is there a CWM package available?
... will this void my warranty? Is it an official release? Is it on Kies?
</sarcasm mode>
stuclark said:
You've just reminded me... I need to reset mine after playing with ICS.
... now how do I do it again, do I need a PIT file in Odin, or is there a CWM package available?
... will this void my warranty? Is it an official release? Is it on Kies?
</sarcasm mode>
Click to expand...
Click to collapse
good one, now i feel closure
surya_mca said:
after flashing the thru ODIN..
just Switch off phone...
pull the battery out..
insert the JIG..
put the battery back..
there phone goes to Download mode with counter resetting to Zero..
Lemme know if u have any issues..
Click to expand...
Click to collapse
Pull the battery? why? i never do, just shutdown the phone, put your jig in and
everything else comes naturely.
Is there a limit in the download counter? Would you advise me to get a jig sooner rather than later?
Sent from my GT-I9100 using XDA App
dave2 said:
Is there a limit in the download counter? Would you advise me to get a jig sooner rather than later?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Man....Paul have been stolen WTF....it's my avatar
armanderli said:
Man....Paul have been stolen WTF....it's my avatar
Click to expand...
Click to collapse
Haha wow. Funny movie though.
Sent from my GT-I9100 using XDA App
it say hidden partition not found or something, just wanted to check the counter, I think I am still on zero
mobilevil said:
it say hidden partition not found or something, just wanted to check the counter, I think I am still on zero
Click to expand...
Click to collapse
Chainfire said that new Triangle Away will be ready in a few days.
mobilevil said:
it say hidden partition not found or something, just wanted to check the counter, I think I am still on zero
Click to expand...
Click to collapse
Its not working coz its not compatible with the official ICS and CF's new root. Triangle away is made for the leaked ICS repack.
Sent from my GT-N7000 using xda premium
I've tried my USB jig on my i9505 and my uncles i9500 with my jig and my brothers jig, and surprisingly, they still get the phones into download mode. I'm not sure if it resets the flash counter though.
Feature:
Forcing device into download mode.
Removing Triangle but not resetting flash counter??? (Still Unconfirmed)
TL;DR USB JIGS DO WORK, HOWEVER THEY ONLY PLACE THE PHONE INTO DOWNLOAD MODE!
I'll update the thread for newbs and noobs with a guide on how to use a USB jig, it's a good investment if you're scared you might brick your phone, they cost around a £1.
If you cannot obtain a USB Jig by purchasing, consider borrowing one, here are threads that have names of people who are available to lend you a USB jig:
http://forum.xda-developers.com/showthread.php?t=1891197
Or make one yourself:
http://forum.xda-developers.com/showthread.php?t=1604707
(IT WON'T WORK IF YOU HAVE USED THE WRONG .pit FILE AND RE-FORMATTED, YOU NEED TO USE A JTAG RIFF, NEW MOTHERBOARD OR SEND BACK TO SAMSUNG!! (Personal Experience ;A)
Just did the same yesterday and was surprised too :cyclops:
My my counter was 0 so I can't tell ...
So PLS somebody with a counter > 0 and good old JIG LOL
Mittaa said:
Just did the same yesterday and was surprised too :cyclops:
My my counter was 0 so I can't tell ...
So PLS somebody with a counter > 0 and good old JIG LOL
Click to expand...
Click to collapse
I thought it'd stop working after the S3 but I'm happy it works, now I don't have to buy more tools and shiz!
Off-topic:
Also my post restrictions are really annoying!
My counter is currently on 3 so, if no one tries it in the mean time, I will try this with my I9100 jig at home later this evening and let you know if it resets it.
Pagnell said:
My counter is currently on 3 so, if no one tries it in the mean time, I will try this with my I9100 jig at home later this evening and let you know if it resets it.
Click to expand...
Click to collapse
I think after the S3, It should really just be called a jig instead of assigning it a certain model Thanks btw! <3
It won't reset counter and change to official status. Just tried.
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
So all in all same results as the S3 then. Will update topic when I get to laptop
Sent from my GT-I9505 using xda app-developers app
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
Indeed. It does go into download mode but the counter is not reset.
Sent from my GT-I9505 using xda app-developers app
It does however seem to prevent the triangle from appearing
Sent from my Galaxy S IV
lambstone said:
It does however seem to prevent the triangle from appearing
Sent from my Galaxy S IV
Click to expand...
Click to collapse
Pagnell said:
Indeed. It does go into download mode but the counter is not reset.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
So it puts the device into download mode, does not reset the flash counter but does get rid of the triangle noting an insecure kernel? Then it works better than it does on the S3
Sent from my GT-I9505 using xda app-developers app
robolo said:
So it puts the device into download mode, does not reset the flash counter but does get rid of the triangle noting an insecure kernel? Then it works better than it does on the S3
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Seems like it. I did not use the triangle away or anything like that but I did flash an insecure kernel for rooting and did not get the yellow triangle.
Also confirming that usb jig will go into download mode, but will not set counter to 0 or "official". Used triangle away to do that.
Sent from my GT-I9505 using Tapatalk 2
Since USB jigs are confirmed to at least place the phone into download mode, shouldn't we tell a mod or someone to place a link or something to the "Borrow a JIG" thread that's in the S2 and S3 forums?
robolo said:
Since USB jigs are confirmed to at least place the phone into download mode, shouldn't we tell a mod or someone to place a link or something to the "Borrow a JIG" thread that's in the S2 and S3 forums?
Click to expand...
Click to collapse
I'm on the S2 list and would suggest OP (Robolo) place links to S2 and S3 threads so people can go there if needed
Mittaa said:
I'm on the S2 list and would suggest OP (Robolo) place links to S2 and S3 threads so people can go there if needed
Click to expand...
Click to collapse
Updated thread! It needs cleaning but I don't have the time, let's hope the weekend'll be kind!
Guys? Would this be sticky worthy for nubs? Or let is roam around and get bumped when searched on google?
robolo said:
Guys? Would this be sticky worthy for nubs? Or let is roam around and get bumped when searched on google?
Click to expand...
Click to collapse
I found the thread via Google.
loociddreemr said:
I found the thread via Google.
Click to expand...
Click to collapse
Was this thread helpful?
Sent from my GT-I9505 using xda app-developers app
To reset the counter by jig we need an unlocked bootloader. The jig works, but we don't have the proper bootloader ...
lambstone said:
Seems like it. I did not use the triangle away or anything like that but I did flash an insecure kernel for rooting and did not get the yellow triangle.
Click to expand...
Click to collapse
S4's and S3's never had a yellow triangle when flashing. Only the country went up and in some cases a tiny red exclamation mark.
Sent from my GT-I9505 using xda premium
hello guys
{ I AM UNROOTING MY DEVICE AND GOING BACK TO THE "OFFICIAL" SYSTEM STATUS SO I CAN CLAIM THE WARRENTY AGAIN COZ I GOT SOME HARDWARE RELATED ISSUE AND I HAVE 9 MONTHS WARRENTY LEFT }
so
Is there a Way to reset My Flash Counter Coz I have flashed my stock rom several times (around 5-6 times)
I downloaded TriangleAway app and granted the superSu permission and It loaded perfectly and shows (Current counter Status "6" and Binary "Custom") thats right..but the problem is my device is not in the supported list of the TriangleAway app. So May I proceed or Try Something Else
Rex Generator said:
hello guys
{ I AM UNROOTING MY DEVICE AND GOING BACK TO THE "OFFICIAL" SYSTEM STATUS SO I CAN CLAIM THE WARRENTY AGAIN COZ I GOT SOME HARDWARE RELATED ISSUE AND I HAVE 9 MONTHS WARRENTY LEFT }
so
Is there a Way to reset My Flash Counter Coz I have flashed my stock rom several times (around 5-6 times)
I downloaded TriangleAway app and granted the superSu permission and It loaded perfectly and shows (Current counter Status "6" and Binary "Custom") thats right..but the problem is my device is not in the supported list of the TriangleAway app. So May I proceed or Try Something Else
Click to expand...
Click to collapse
Btw I have already solved this problem by just giving a try to TriangleAway app and It worked Like Charm .The only thing I have to do is Hard Reset My device
Someone on this forum posted an app called knoxdisabler or knoxreset i think try that some people say its working
_Exeedy_ said:
Someone on this forum posted an app called knoxdisabler or knoxreset i think try that some people say its working
Click to expand...
Click to collapse
Where's the file???
Sent from my SM-J320F using Tapatalk
Rex Generator said:
Where's the file???
Sent from my SM-J320F using Tapatalk
Click to expand...
Click to collapse
Here is the link:
http://forum.xda-developers.com/android/general/disable-knox-reset-knox-counter-to-0x0-t3414890
How did you do that please make a mini tutorial because idk how the app works!
Need to hide I
Imei please em