Database Users

[How To] Enable Non-Market apps on Captivate (consolidated)

(additional CHOWN notes added below. If you are getting "chown: unknown user/group system:system" read them!
Ok, we do have a WHOLE other thread that was made a sticky already, but you need to read the WHOLE thing to get all the properly interesting parts. I'll make sure I keep this OP up to date.
The following methods enable side loading and installing of apps onto the captivate, without the need of a program on a computer attached via the SDK. There are multiple methods, and for the most part, these methods that have worked flawlessly for many users here on this forum. We're just collecting them all in one post for speed and clarity.
Methods that assist in loading applications, without modification to the settings (a.k.a still need a computer attached) can be found at the collective wiki, http://samsungcaptivate.wikia.com/wiki/How_to_Sideload
ALL METHODS REQUIRE ROOT & BUSYBOX:
Root your phone, see http://forum.xda-developers.com/showthread.php?t=725555
Busybox : http://www.appbrain.com/app/stericson.busybox
Please, save a clean, un-altered backup copy of this file. To be safe. Rarely does corruption occur, but if it does, it won't be good.
Method 1: From Win7x64, Samsung Drivers, Android SDK installed.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the command prompt. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppBrain etc and run it. It will download and install the latest version for you.
From my Win7x64, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to PC, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open command prompt, follow along:
Code:
> c:
> cd \android\tools
> adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the pc,
"USB Connected select to... ", Mount
mine mounted as H:
Code:
> copy H:\settings.db settings.db
> sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> copy settings.db H:\settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Bam. Done.
Method 2: with Root Explorer
(courtesy of kirbo20)
This is a pretty easy process. I went in to Root Explorer - dbdata - databases - com.android.providers.settings, copied settings.db to my sd card, edited it on my pc with a db editor changed 0 to a 1 next to non market apps. Copied it back to the original directory, rebooted and installed a non market app.
(added by gotfolk)
again using FF plug in..
Click Secure on the left pane
click on install_non_market_apps
click edit
number 3 states value click there and type in 1. hit ok
(/gotfolk)
Please use caution. If you want to make sure the db save properly open it on your sd card before you copy and replace the original. It should open up as a readable table. If it opens up in a txt editor its corrupt. This permanently enables non market apps. You can not toggle it on and off.
( This is a sqlite3 database file, you can find many GUI editors that will be able to handle the editing, including a FF plugin. Search "SQLite" )
Method 3: with Root Explorer & Sqlite Editor & Terminal Emulator
(courtesy of ice3186)
- Open Root Explorer
- Browse to /dbdata/databases/com.android.providers.settings/
- copy settings.db to the root of your sd card ( /sdcard/ )
- Click on the newly copied settings.db in /sdcard/, with SQLite Editor installed, you can open and edit it here.
- Select the "secure" table, and update the value of 'install_nonmarket_apps' from 0 to 1, and save.
- close out of SQLite editor
- copy the modified file ( /sdcard/settings.db ), and browse back to /dbdata/databases/com.android.providers.settings/ and paste
- confirm the overwrite if asked and then open again to confirm it's been changed.
- open Terminal Emulator
Code:
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# reboot
- reboot phone.
No PC, no Mac, no drivers, no SDK. Viola.
Method 4: Mac & Android SDK
You will see "[sdcard]" through this method...I don't own a Mac so I'm guessing a bit.
This method uses the tools you already have at hand, as part of the SDK. All instances in code blocks are run inside of the Terminal. You will need to know where you installed your SDK, and the tools directory therein.
Once rooted, go install BusyBox installer from the App Market/AppDroid etc and run it. It will download and install the latest version for you.
From a Max OS X, with USB Debugging ON. Ensure that you phone is UNLOCKED as it the SU app will ask for permission for 'UNKOWN' in the following command.
Connect to Mac, and Eject/Safely Remove the SD card, and "Turn off USB Storage" on the phone.
open Terminal, follow along:
Code:
> cd /android/tools
> ./adb shell
$ su
# cp /dbdata/databases/com.android.providers.settings/settings.db /sdcard/settings.db
# exit
$ exit
mount the SD cards to the Mac,
"USB Connected select to... ", Mount
mine mounted as [sdcard]
Code:
> cp [sdcard]/settings.db settings.db
> ./sqlite3 settings.db
~> update secure set value="1" where name="install_non_market_apps";
1 row updated
~> .quit
> cp settings.db [sdcard]/settings.db
Eject the drive, safely remove, etc.
"Turn off USB storage" etc, to mount it back to the phone
Code:
> ./adb shell
$ su
# cp /sdcard/settings.db /dbdata/databases/com.android.providers.settings/settings.db
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> ./adb reboot
Method 5: Android SDK only
Of course, this also requires root and BusyBox.
From the android sdk tools folder in a command prompt:
note: all linux/mac should use './adb' in place of just 'adb', and place quotes on the echo statement between echo and |
Code:
adb shell
su
chmod 666 /dbdata/databases/com.android.providers.settings/settings.db
exit
exit
adb pull /dbdata/databases/com.android.providers.settings/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /dbdata/databases/com.android.providers.settings/settings.db
adb shell
su
chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
chown system.system /dbdata/databases/com.android.providers.settings/settings.db
reboot
NOTICE
You must chown the settings.db file and reboot once it is back in its original location. If you do not, you will not be able to alter settings such as WiFi,GPS, default Ringtones, etc. It's also highly likely that you may wish to chmod to 660 (-rw-rw---), so I've tacked that in here and above.
Code:
> adb shell
$ su
# chmod 660 /dbdata/databases/com.android.providers.settings/settings.db
# chown system.system /dbdata/databases/com.android.providers.settings/settings.db
# exit
$ exit
> adb reboot
Chown Note
In the event that you are getting "chown: unknown user/group system:system" please try 1000.1000 as this has been reported to work on several of the samfirmware-released roms that fail with this message.
Absolutely do not use someone else's settings.db unless you specifially make it a point replace android_id with your android_id!
Special Note
Any of these adb comments can be run from Terminal Emulator (Android Terminal Emulator, free) from the su command. I use the ADB here as it is a lot easier to type into. Terminal Emulator will provide you with a shell that is an exact match of the 'adb shell' command, as they both simply provide the shell to you.
Result:
After completing this process you will be able to load non-market apps directly from the APK files, SDK tools, tools such as DroidExplorer and apps such as APKtor.
You will be able to download the APKs directly, and then install from your favorite file browser (e.g. MyFiles(s), Astro(f), RootExplorer($)...)
Tools
SQLite Administrator (Win, GUI, no FF required) http://sqliteadmin.orbmu2k.de/
SQLite Manager (FF addon, search for it)
Application links
Root Explorer http://www.appbrain.com/app/com.speedsoftware.rootexplorer
SQLite Editor http://www.appbrain.com/app/com.speedsoftware.sqleditor
Terminal Emulator http://www.appbrain.com/app/jackpal.androidterm
BusyBox http://www.appbrain.com/app/stericson.busybox

bump.. settings.db people.. please read the threads!!

good stuff!!!

Ok. I can find settings.db with root explorer. i can copy it and i put it in my sdcard folder but nothing is there when i try to find it on my computer. Im trying to use SQlite editor on firefox. Im also on a powermac g4 if that makes a difference. I did download sqlite editor on my phone and I can find where to change the values for installing non market apps but when I change from a zero to a one it denies me. Please help

Ok, so let me make sure I have your process:
- Rooted
- Installed busybox ?
- Installed Root Explorer
- copied settings.db to /sdcard
-- cant see the file when mounted to Mac, thus can't edit with FF plugin
-- SQLite editor for android wont allow access..
(is this the SQLite Editor you used? http://www.appbrain.com/app/com.speedsoftware.sqleditor)
Try installing "Android Terminal Emulator" from the market (http://www.appbrain.com/app/jackpal.androidterm)
- open Terminal Emulator
$ su
# cd /sdcard
# chmod 777 settings.db
# exit
- Open the sqlite editor, and make the change
- back to Terminal Emulator
$ su
# chmod 660 settings.db
- proceed with rest of instructions.

how many more threads do we need on the same thing? We already have ALL of this info posted, several times.

designgears said:
how many more threads do we need on the same thing? We already have ALL of this info posted, several times.
Click to expand...
Click to collapse
Please read my initial post, first few lines. I explained why, specifically: Consolidation.

Thanks I will give it a try later today.
Sent from my SAMSUNG-SGH-I897 using XDA App

- OP updated to reflect stock ownership settings for 'chown'
Also, which sqlite app are you using? I'll put that up as method 3 if it works out nicely for you.

fixed a typo in the chown command.. bad copy paste.. bad.. doh.

added method 3 courtest of ice3186

added links to Root Explorer ($), SQLite Editor ($) and Android Terminal Emulator (free) and added the chmod/chown commands to method 3, as they were skipped by accident.

bump** for newcomers, sry.

thanks max for adding the third method. this was by far much easier than the first two methods. I have a hard time getting my mac to talk to my phone sometimes and it was good to not have to plug the lil guy in at all. Worked like a charm

myself and ice3186 are glad we could be of help

If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do

mkslt4 said:
If I had accidentally deleted the settings.db how should I go about recovering my phone? Now I have the issue that my phone won't boot past the boot animation and I'm notbsure what to do
Click to expand...
Click to collapse
Did you make any kind of backup before hand?
You may have to use someone else's settings.db and then do a factory reset.
Depending on how much you've done with the phone I'd suggest deciding on doing a the reboot process for rooting, but choosing to clear data. This may rebuild it, I am not sure.

my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..

xetrev said:
my dbdata directory is empty.. My phone is less then 2 hours old and i have some market apps installed..
Click to expand...
Click to collapse
Oh, if it's running, then this folder isn't actually empty.
What are you using to browse this folder?

i followed this guide to a T yesterday when i did this. I used option 1, ADB commands on terminal since i'm a mac and it was super easy, did it in about 5 minutes.
this is just my opinion but i think everyone should try playing with the ADB commands, they're actually really useful and educational to know. and if you should brick your phone, just use clockwork recovery to restore it.
that being said, maybe you should add a disclaimer that when done on a mac, the adb commands require a "./" in front (so adb reboot becomes ./adb reboot). cp, chown, and chmod commands don't need it though (or at least i didn't).

[GUIDE] ADB Workshop and Guide for everyone

This workshop was held in #android-learning on irc.freenode.net by XDA Member Adrynalyne. All credit to him for this guide, I simply am taking it and turning it into a guide. Here we go!
You can find the raw IRC log here
Good evening folks, and welcome to my ADB workshop. This is by no means a full explanation on the subject, but more of a crash course to help folks get up to speed, and get more from their devices. There may be some things you already know here, so please be patient and respect those who do not.
Reference Files
http://adrynalyne.us/files/How to install adb.pdf
http://adrynalyne.us/files/Using ADB.pdf
So, lets just start with the basics.
What is ADB?
ADB stands for the android debugging bridge and is used for testing and debugging purposes by developers.
However, we like to get more out of our devices, and its a great way to fix things.
Knowing adb can mean the difference between a paperweight and a working phone.
So, to start with, we will look at installing ADB.
Generally speaking, the Sun/Oracle JDK is required to run all SDK functions.
ADB is but one tool in the SDK arsenal.
So, we begin by downloading and installing the JDK. This can be found here:
https://cds.sun.com/is-bin/[email protected]_Developer
Choose your OS, download and install. I recommend that 64 bit users use the regular x86/32 bit version as well.
Moving ahead, we download the Windows sdk from here:
http://dl.google.com/android/installer_r08-windows.exe
Due to already installing JDK, you won't be stopped by the install process.
Now, if you notice, I installed it to:
C:\android-sdk-windows
I did this because it makes things easier when setting up path variables.
I encourage everyone to do the same, but obviously it is not required.
So, this SDK is handy, but is only good up to 2.2. We want the latest and greatest! (Well I do)
So, we navigate to:
C:\android-sdk-windows\
and we run SDK Manager.exe
If you notice in your PDF file for installing adb, you will notice that you can update, and I made a choice not to include earlier sdk versions.
I won't go into full detail on that, but depending on the version of SDK you have, 8 or 9, it WILL make a difference in using adb.
By default, for version 8 adb.exe resides in C:\android-sdk-windows\tools
By default, for version 9 adb.exe resides in C:\android-sdk-windows\platform-tools
We will assume version 9 in this guide
Really, the SDK is installed and adb is usable right now, but in my humble opinion, its not enough
I like the ability to use adb in ANY directory on my machine.
To do this, we edit Windows's environment variables.
Specifically, the system path.
To do this, we click on start, or the orb (depending on OS), and right click on Computer, left clicking on properties in the menu.
If its windows XP, I believe it brings you into advanced system properties immediatly. Vista and 7 need a second step.
On the left hand side, as you notice I have highlighted in the pdf, left click advanced system settings.
Under advanced tab, we left click environment variables...
There are two boxes here.
We are concerned with system variables, however.
So we scroll down the list and highlight path and click edit.
Ignoring all the extra stuff in here, make sure you are at the end of the line, and type
Code:
;C:\android-sdk-windows\platform-tools
The semicolon allows us to separate it
from the previous path statement.
Click ok all the way out.
We now have ADB setup globally. We can use cmd.exe (I use powershell) and no matter what directory we are in, adb is recognized.
If it is not, make certain you entered the path into system variables, and made no typos.
If you installed to a different location, you will need to adjust the path accordingly.
This concludes the section on installing the Android SDK to use ADB.
This next section will be on using ADB, so please open that pdf now.
Now, this applies to any OS, not just Windows.
Well, with the exception of the USB drivers.
I will not go too much into that, but if you take a look at the PDF, it goes through installing usb drivers for the sdk, and how to download them.
Fiarly straightforward, in that rspect.
Now, to setup our phones to use with the SDK and ADB, we must change some settings.
First, we go to menu softkey, then settings.
We scroll down to Applications and tap it.
Under Development, we will check Enable USB Debugging. Please note the SGS phones are different in this respect.
The USB cable must be unplugged before enabling or disabling this setting.
Once this is done, we are now ready to play with adb
One quick note: If you get device not found/conencted, please reboot your phone. DJ05 has a quirk in it where ADBD randomly crashes on boot.
A reboot will fix this
ADBD= ADB Daemon
Ok, continuing on.
Lets look at installing applications. This is also known as sideloading.
Unlike installing from the SD card, it does not require unknown sources to be enabled.
The command for this is
Code:
adb install packagename
This assumes that you are working from the directory where the file is located.
This will install the application to /data/app.
It will also show sometimes useful errors if install fails.
That is not something you will see from the Android GUI.
Now, a lot of us have probably deleted files with apps like Root Explorer. While this isn't really a bad thing, it leaves behind databases and data for the application removed.
This is where the 0kb applicaiton entries come from.
If you take that application entry name, you can uninstall the extra data via adb.
First we go to the adb shell which logs into the phone.
Code:
adb shell
If we end up with a $, we will want admin rights, in many cases. This is not one of them, I don't beleive.
To get admin rights, you want to type
Code:
su
Look at your phone if this is the first time, it may prompt you to allow access. Else you will get permission denied.
If you are not rooted, this will not work either.
Ok, now that we are logged in, we will type
Code:
pm uninstall packagename
where packagename is the name of the 0kb listing.
Now this seems like a pain in the a** and I agree.
HOWEVER
There will be a time where Manage applications crashes when you try to uninstall it from the phone. In this case, a factory reset, or this method is the only effective way to fix the problem.
Moving on.
How many of us have removed system applications or renamed them? Did you know that you can simply disable them from the system?
Code:
adb shell
su
pm disable appllicationname
This will disable it, and the system will ignore it.
This can be seen as safer than deleting or renaming things, but your mileage may vary.
On the other hand, you can also re-enable these applications.
Code:
adb shell
su
pm enable applicationname
Please note: Not all applications will properly re-enable. I believe a factory reset or reinstall of said application will fix the issue.
Also, application names are absolutely case sensitive.
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Ok, a lot of us tweak and mod our phones and turning off the device to get to clockwork recovery, or battery pulls, or multiple button holds to get into Download mode are troublesome and annoying at best.
ADB can help us here.
Here, we do not need to be logged into the shell
If we want to merely reboot the phone:
Code:
adb reboot
If we want to go to recovery (works well with voodoo5)
Code:
adb reboot recovery
If we want to go to Download Mode because we need Odin, heaven forbid:
Code:
adb reboot download
Its instant. No waiting on animations or anything else.
Its also handy if Android has locked up, but yet still works in adb.
I for one hate taking my case off to battery pull.
So now we move on to pushing and pulling files.
Sometimes, I don't feel like mounting my sd card to copy a file over to my phone.
I can use this command to push a file straight to my sd card:
Code:
adb push filename /pathtodirectoryonphone
So for instance, if I have test.txt that I want to send, I would type:
Code:
adb push test.txt /sdcard/
and there it goes.
Ok moving on
Pushing files can be done to any directory, however, some are protected.
For instance, /system is going to give you a permission denied or a read only filesystem error.
To get around this, the easiest thing to do is push the file to your sdcard, then log into the shell:
Code:
adb shell
Code:
su
We will then mount the system as writable
Code:
mount -o rw,remount /dev/block/stl9 /system
Then we can use something like
Code:
cp /sdcard/test.txt /system/app/test.txt
cp stands for copy
and it requires the path of the file and destination path. The name of the file is optional
When you copy it, you can rename it to whatever you like.
For instance, if we wanted to backup a file
Code:
cp /sdcard/test.txt /sdcard/backuptest.txt
Now, lets assume you do not have busybox installed.
You non rooted users will not.
Then you must use a slightly more complicated command called dd
This is used like this:
Code:
dd if=/sdcard/test.txt of=/system/app/test.txt
if is for inputfile
of= output file
Not every user friendly, but probably one of the safer copy commands.
Ok, moving on to pulling files.
Lets say you want to get a file from your phone, to modify, backup, etc.
To do this, we simply use adb in this manner:
Code:
adb pull /pathtofile/filename destinationname
For instance, if I wanted to backup ADW launcher in system/app
I would do this
Code:
adb pull /system/app/ADWLaucnher.apk ADWLauncher.apk
And it will pull the file from the phone and put it in the current directory.
Like above, you can specifcy where it goes.
pushing files to the sdcard, it seems prudent to talk about changing permissions.
sdcards are typically fat32, which destroys permisisons, and Android is heavily permission based.
So if you push an application to your sd card, then try to copy it to /system/app/ bad things are going to happen, or the app may not even show up.
So in that case, we use something called chmod.
This is used in this manner
Code:
adb shell
su
chmod 755 /pathtoapplication/applicationname
Keep in mind
you dont want to do this while its still on your sd card.
an example
Code:
adb shell
su
chmod 755 /system/app/ADWLauncher.apk
755 is good for applications and script files.
Just a couple more topics to cover.
Lets go over deleting files.
This becomes especially handy for removing rogue applications.
To do this, we must be in the adb shell.
Code:
adb shell
su
rm /system/app/ADWLauncher.apk
You may need to remount system as writable with:
Code:
mount -o rw,remount /dev/block/stl9 /system
That applies when using chmod as well.
So what I did above was delete ADW Launcher from system/app
However, what if I wanted to delete the entire contents of a directory?
Same thing as before, except
Code:
adb shell
rm -f /data/dalvik-cache/*.*
I just cleared my dalvik-cache with that command
very quick, very effective.
If you just tried that, please reboot your phone now
Ok....this leaves us with the final topic: logcat
logcat allows us to log what the OS is doing, and possibly delve information for when things are not working
its quite simple Reading it is another.
To use logcat
Code:
adb shell
logcat
To logcat to a certain file do
Code:
adb shell
logcat > /sdcard/logcat.txt
Now we let the log settle down to a reasonable amount of data coming in and not a wall of scrolling, then start the app in question. When it gives an error, we hit ctrl-C and kill the adb shell session.
This should have captured enough data to see the error. Now, I prepared an example. A user came to me on IRC, and Google Maps was force closing. Clearing data didnt fix it, Clearing dalvik-cache, and fix permissions did not fix it. In this case, the user did not know how to use adb So I had him grab an app called alogcat from the market and email me the log. This is also a very valid method.
this file explains what the problem was, and highlights what to look for as an example.
http://adrynalyne.us/files/logcat.pdf
___________________________________________________________________
This concludes the guide from Adrynalyne, there will be more workshops such as this one in irc.freenode.net #android-learning.
Thanks to everyone in #samsung-fascinate !

Reserved for possible extension of topic

Great, saves a lot of questions/answers & search
Every new user should read this!!

Thread stuck as valuable reference thread

Just to add, if I may, a little about the permissions...
============================================================
File permissions for Unix... which Android is based, just so those who tinker with the file permissions may know what they are getting into.
============================================================
Use the chmod command to set file permissions.
The chmod command uses a three-digit code as an argument.
The three digits of the chmod code set permissions for these groups in this order:
1.Owner (you)
2.Group (a group of other users that you set up)
3.World (anyone else browsing around on the file system)
Each digit of this code sets permissions for one of these groups as follows. Read is 4. Write is 2. Execute is 1.
The sums of these numbers give combinations of these permissions:
0 = no permissions whatsoever; this person cannot read, write, or execute the file
1 = execute only
2 = write only
3 = write and execute (1+2)
4 = read only
5 = read and execute (4+1)
6 = read and write (4+2)
7 = read and write and execute (4+2+1)
Chmod commands on file apple.txt (use wildcards to include more files)
Command Purpose
chmod 700 apple.txt Only you can read, write to, or execute apple.txt
chmod 777 apple.txt Everybody can read, write to, or execute apple.txt
chmod 744 apple.txt Only you can read, write to, or execute apple.txt Everybody can read apple.txt;
chmod 444 apple.txt You can only read apple.txt, as everyone else.
Detecting File Permissions
You can use the ls command with the -l option to show the file permissions set. For example, for apple.txt, I can do this:
$ ls -l apple.txt
-rwxr--r-- 1 december december 81 Feb 12 12:45 apple.txt
$
The sequence -rwxr--r-- tells the permissions set for the file apple.txt. The first - tells that apple.txt is a file. The next three letters, rwx, show that the owner has read, write, and execute permissions. Then the next three symbols, r--, show that the group permissions are read only. The final three symbols, r--, show that the world permissions are read only.
Compliments and full credit from:
http://www.december.com/unix/ref/chmod.html

Amazing thread just what I needed lol thanks!

cooolone2 said:
Just to add, if I may, a little about the permissions...
============================================================
File permissions for Unix... which Android is based, just so those who tinker with the file permissions may know what they are getting into.
============================================================
Use the chmod command to set file permissions.
The chmod command uses a three-digit code as an argument.
The three digits of the chmod code set permissions for these groups in this order:
1.Owner (you)
2.Group (a group of other users that you set up)
3.World (anyone else browsing around on the file system)
Each digit of this code sets permissions for one of these groups as follows. Read is 4. Write is 2. Execute is 1.
The sums of these numbers give combinations of these permissions:
0 = no permissions whatsoever; this person cannot read, write, or execute the file
1 = execute only
2 = write only
3 = write and execute (1+2)
4 = read only
5 = read and execute (4+1)
6 = read and write (4+2)
7 = read and write and execute (4+2+1)
Chmod commands on file apple.txt (use wildcards to include more files)
Command Purpose
chmod 700 apple.txt Only you can read, write to, or execute apple.txt
chmod 777 apple.txt Everybody can read, write to, or execute apple.txt
chmod 744 apple.txt Only you can read, write to, or execute apple.txt Everybody can read apple.txt;
chmod 444 apple.txt You can only read apple.txt, as everyone else.
Detecting File Permissions
You can use the ls command with the -l option to show the file permissions set. For example, for apple.txt, I can do this:
$ ls -l apple.txt
-rwxr--r-- 1 december december 81 Feb 12 12:45 apple.txt
$
The sequence -rwxr--r-- tells the permissions set for the file apple.txt. The first - tells that apple.txt is a file. The next three letters, rwx, show that the owner has read, write, and execute permissions. Then the next three symbols, r--, show that the group permissions are read only. The final three symbols, r--, show that the world permissions are read only.
Compliments and full credit from:
http://www.december.com/unix/ref/chmod.html
Click to expand...
Click to collapse
Thanks! Added
ih4ckback said:
Amazing thread just what I needed lol thanks!
Click to expand...
Click to collapse
Thanks, all goes to Adrynalyne

Thanks for the guide. Helped me pick out the stupid stupid mistakes I was making...so just a problem. I'm able to use fastboot easily but I seem to be unable to use ADB still on my windows 7. It says there are no devices and I'm dang well sure I have USB debugging on. Is it because Windows 7 is missing drivers for the nexus one or something else?

wonderful guide. I would like to add it to the guides thread.

Really awesome work, thumbs up.
But we should also take a guide on installing adb with Ubuntu/Linux, which isn't a very difficult thing...

mm7490 said:
Really awesome work, thumbs up.
But we should also take a guide on installing adb with Ubuntu/Linux, which isn't a very difficult thing...
Click to expand...
Click to collapse
If I got time tomorrow I could do that. I work primarily in Linux also
Sent from my Samsung Fascinate using Tapatalk Pro

This is good but I have a problem, when I try to remove an .apk file from /system/app it fails and says 'rm failed, Directory not empty'
I have followed exact instructions many time but never succeeded :s any help!!
(I am runnging these commands in device mod)
when I am in recovery mod I get this prompt ~ # and I am not able to enter su mod. how to get rid of this??

Well when the $ changes to # it means you have SU access

mustafa.aziz said:
This is good but I have a problem, when I try to remove an .apk file from /system/app it fails and says 'rm failed, Directory not empty'
Click to expand...
Click to collapse
Please give us the exact command(s) you entered

Here are the commands I entered after adb shell;
su
mount -o rw,remount /dev/block/stl9 /system
rm /system/app/mytouchmusic-signed.apk
exact message returned is 'rm failed for mytouchmusic-signed.apk, Directory not empty'

mustafa.aziz said:
Here are the commands I entered after adb shell;
su
mount -o rw,remount /dev/block/stl9 /system
rm /system/app/mytouchmusic-signed.apk
exact message returned is 'rm failed for mytouchmusic-signed.apk, Directory not empty'
Click to expand...
Click to collapse
Ok i think you need to do a recursive force delete which should be rf but i am not too sure! could somebody please confirm/ correct this?

Well, I don't think so ^^ As he doesn't want to erase a whole directory, but only a file.
What surprises me the most is the returned message... You're trying to delete an apk, and it says it's a directory :/
Could you please give us the output of this :
Code:
su
mount -o rw,remount /dev/block/stl9 /system
ls -l /system/app/mytouch*
Perhaps you don't even need the su and mount lines, but I'm not sure about that, and that can't harm your system ^^

Khoral said:
Well, I don't think so ^^ As he doesn't want to erase a whole directory, but only a file.
Click to expand...
Click to collapse
I know he doesn't want to delete a whole directory, but since the apk isn't compressed perhaps android looks at is as a directory and not a file? i don't know since what was returned suggested that it was a directory i presumed it was a directory! :S

mustafa.aziz said:
Here are the commands I entered after adb shell;
su
mount -o rw,remount /dev/block/stl9 /system
rm /system/app/mytouchmusic-signed.apk
exact message returned is 'rm failed for mytouchmusic-signed.apk, Directory not empty'
Click to expand...
Click to collapse
rm -rf /blah/blah

here is your desired output:
sh-3.2# su
su
sh-3.2# mount -o rw,remount /dev/block/stl9 /system
mount -o rw,remount /dev/block/stl9 /system
sh-3.2# ls -l /system/app/mytouch*
ls -l /system/app/mytouch*
-rw-r--r-- root root 299838 2008-08-01 18:00 mytouchmusic-signed.apk
sh-3.2#

[Q] Permissions problem using adb to push app

I'm running a script to modify settings.db (found in the application forum) so that I can wirelessly tether and use the GPS on my phone while running Google Maps on the KF.
The script starts like this:
adb shell rm /data/local/tmp/*
adb push zergRush /data/local/tmp
adb shell chmod 755 /data/local/tmp/zergRush
adb shell ./data/local/tmp/zergRush
Click to expand...
Click to collapse
and works fine.
But I'm having problems running the script that others are having no problem with at this point in the script.
adb pull /data/data/com.android.providers.settings/databases/settings.db
copy settings.db settings.bak
sqlite3 settings.db "update secure set value=1 where name='mock_location';"
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
adb reboot
Click to expand...
Click to collapse
The script runs into permission errors. I have all the files in the same directory as adb in the platform-tools folder. adb is communicating with the device with the adb devices command. I run the .bat file from the folder while in a DOS command shell. And I get this error
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb pull /data/data/com.android.providers.settings/databases/settings.db
failed to copy '/data/data/com.android.providers.settings/databases/settings.db' to './settings.db': Permission denied
C:\Program Files (x86)\Android\android-sdk\platform-tools>copy settings.db settings.bak
The system cannot find the file specified.
C:\Program Files (x86)\Android\android-sdk\platform-tools>sqlite3 settings.db "update secure set value=1 where name='mock_location';"
Error: no such table: secure
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
failed to copy 'settings.db' to '/data/data/com.android.providers.settings/databases/settings.db': Permission denied
Click to expand...
Click to collapse
Any idea what's going on?

i assume you'r at the $ prompt - if you type in su the prompt should change to #
perhaps a hint in the right direction ...
zergrush does'nt work anymore since 6.2.1 and burritoroot

I am not at any command prompt when running the script. I'm at the Windows prompt, and I just execute the script name?
Confused.

when you type adb or adb shell your mostly at the $ prompt
when you type su the promt usually changes to # - thats root access
i think you have to integrate that in your script ...

I added
adb shell su
to the start of my script, but then it just hangs at the root prompt.

if you have rooted with burritoroot try "adb root"

It says:
adbd cannot run as root in production builds

ok then i think you will have to try it with the su method - maybe "adb su" could work - it's just a try
otherwise i think you will have to write a second unix stile script (ending .sh) to do the stuff and call it from your dos script or run it in the adn shell - but i'm not the unix expert - sorry
i'm running out of time now - wish you much luck with your script !!!

Anyone else please?

Resolved.….

Resolved how? Very curious

Please, how did you solved the problem ???
thanks

would be interested too !

Here's how.
I was so frustrated, didn't seem to be able to achieve root status and use ADB. So, I bought root explorer, went to directory where settings.db file was, and copied it to sdcard folder on the KF. Then brought it over to my PC just over the USB connection (KF was a Windows drive).
In Windows, ran the part of the script that replaces the "0" with a "1". Then copied it back to the sdcard folder on the device, and used root explorer to move it back to its proper directory.
Only one caution. Make sure that you don't change the permissions or ownerships of the file, that they are the same as when you first grabbed it.

Possible new way to ROOT

New possible root method on Thinkpad tablet forums, by OPDECIRKEL. He needs help testing it out.
look here and lets cross our fingers =D
http://www.thinkpadtabletforums.com...nt/yareftpt-yet-another-root-exploit-for-tpt/

opdecirkel released the exploit -> http://opdecirkel.wordpress.com/2012/03/18/yareftpt/

unfortunately, it doesn't work. =( can't execute "adb remount" when the script calls for it, but hopefully things will get ironed out soon.
***EDIT***
updated script worked!

-=HOLLYW00D=- said:
unfortunately, it doesn't work. =( can't execute "adb remount" when the script calls for it, but hopefully things will get ironed out soon.
Click to expand...
Click to collapse
Not sure if it can help you, but try checking the TPT forum thread again, there has been some advances and troubleshooting going on

Moved To General​
As the first post is just a link and contains no development, this has no place in this section​

updated -> http://opdecirkel.wordpress.com/2012/03/18/yareftpt/
Someone thinkpadtabletforum reported that it worked for him.

updated script worked for me! cwm installed fine as well!

I achieved root with the new method on OTA 2.5. Also installed CWM with no issues. Works great.
Sent from my PC36100 using Tapatalk

I can confirm it worked!
I had to update first because the "Disable Battery Discharge" option was not there. (I guess my Tablet stopped getting OTA updates since I was on ThinkPadTablet_A310_02_0024_0065_US... Also, you have to update one at a time, you can't go from 24_65 straight to 37_75. Also, I stopped at 39_86 since I was impatient.)
I like this once since we can see how it worked rather than blindly running some guys program (I never tried the first root.)

I can also confirm the new method to be working. Just rooted my 0089_WE TPT. Works like a charm

I am quoting the following post (i don't have privilege to post there): forum.xda-developers.com/showpost.php?p=23902281&postcount=64
daswahnsinn said:
I unrooted and then updated, now I can't root. I updated the SDK and made sure I have the proper drivers needed. So I take back my easy comment. I'll keep trying I might just manually push the files back.
Click to expand...
Click to collapse
How did it fail? At which stage and what error did you get?

Okay, I'll try and flash the oldest update zip, and it fails as it should, then I wipe the cache part, reboot, and I hit enter when I gets to the unlock screen then the CMD window closes.
EDIT: I spent a good hour or so combing through my PC and these forums and tried both methods a lot, and this one finally worked. It wouldn't let me get to the /cache/recovery/pwn/su part of the script. Thank you all for your support.

I have problems...
Hi all,
Apologizes for my english, too bad to discuss this kind of issues. Sorry in advance.
I had the "fantastic" idea to update the firmware some weeks ago, when I was SU. After this, I've lost most of capabilities!
I tried to follow the procedure, but I cannot reach 'root' in any case. I have version WE089. Downloaded US060, but there's only 065 for Western Europe. I got both, just in case..
Unfortunately, in the first step it failed I'm not able to update anything. The process crashes when is loading old firmware, either US060 or WE065.
I've realised that during the process I loose the USB link connection (when I reboot), and the system tries to install again and again the driver. If the TPT is running in recovery mode, it seems that is not connected via USB... If I have the tablet in "normal use", I see it through the Windows Desktop.
Other question: should I disconnect the Internet connection?
I guess other requirements are right (ADBD, debugging mode,...). It's really annoying, it took me a lot of hours and I haven't found any solution.
Can anybody help me? What I'm doing wrong?
Cheers!
jm
W7 64bits - TPT WE089

@jm
goto device manager. right click on Android device. reinstall device driver.
This worked for me in recovery when the device was not recognized.
Edit: look here: http://forum.xda-developers.com/showthread.php?t=1471106&page=2

What do you mean with loosing the connection? Is the adb driver installed correctly? Where did you get it from? Is it an genuine lenovo driver? If so, than you shouldn't worry!
Perhabs it's the MTP driver, that is missing when you boot into recovery? If it's the adb driver, than you should try jlove's method.
In addition I wanted to inform you, that the new method worked for me, too! Even with some complications... by this way, thanks again to opdecirkel!
Because the run.bat script did't worked correctly, I had to do it manually. So I put the "yareftpt" on C:\\, started cmd.exe, booted the TPT into recovery and changed the directory in cmd.exe with "cd.." to "cd yareftpt" ...followed the instructions with the update...
echo 4. Reboot in RECOVERY: (shutdown the tablet, then start it and press volume + few times until it starts in recovery)
echo 5. Go to apply update, select the update from the sdcard and try to apply it. It will fail, but that is OK.
echo 5. Then, go to 'WIPE CACHE PARTITION' and select it (navigate with volume buttons and select it with power button),
echo 6. When wipe cache complete, press (here) ^<ENTER^>.
and after that I copied the first line of the script into cmd and executed. I did it line after line, just to the next step. (dark green= copy line after line, paste and execute)
adb shell "/system/bin/mkdir /data/local/pwn"
adb shell "/system/bin/mkdir /data/local/pwn-bak"
adb shell "/system/bin/cat /system/etc/install-recovery.sh > /data/local/pwn-bak/install-recovery.sh.orig"
adb shell "/system/bin/mkdir /cache/recovery/pwn"
adb push su /cache/recovery/pwn
adb shell "/system/bin/rm /cache/recovery/log"
adb shell "/system/bin/ln -s /system/etc/install-recovery.sh /cache/recovery/log"
adb shell "echo \"/system/bin/chmod 777 /cache\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/mount -t ext4 /dev/block/mmcblk0p4 /cache\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/chmod 777 /cache\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/mount -oremount,rw -t ext4 /dev/block/mmcblk0p4 /cache\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/chmod 777 /cache\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/chmod 777 /cache/recovery\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/chown root /cache/recovery/pwn/su\" >> /tmp/recovery.log"
adb shell "echo \"/system/bin/chmod 4777 /cache/recovery/pwn/su\" >> /tmp/recovery.log"
echo 7. On the device, go to 'DISABLE BATTERY DISCHARGE' and select it. When complete press (here) ^<ENTER^>
pause
some of commands might cause failures, but don't worry and just go on
adb shell "/system/bin/rm /cache/recovery/log"
echo 8. On the device, select REBOOT. When startup COMPLETE press (here) ^<ENTER^>
pause
adb push Superuser.apk /data/local/pwn/Superuser.apk
adb push busybox /data/local/pwn/busybox
adb push su /data/local/pwn/su
adb push pwn-in.sh /data/local/pwn/pwn-in.sh
adb shell "/system/bin/chmod 777 /data/local/pwn/pwn-in.sh"
echo Your PC command prompt appears next. Do the following things:
echo 1. adb shell
echo when '$' (adb shell) appear, do:
echo 2. /cache/recovery/pwn/su
echo when '#' appears. You are root. run the following:
echo 3. /data/local/pwn/pwn-in.sh
now you should try if you have su, even if you don't see in your app list..
download root checker, install, open and try it!
You should have root right now.
In my case, i had root, but no CWM!
So I had to install in manually, but with root it should't be a problem. you only have to download the correct cwm version:
http://forum.xda-developers.com/showpost.php?p=21916505&postcount=71
then I installed it with the Android Terminal Emulator app, because the cmd.exe method did't worked for me. You should just follow the instructions:
or you can copy img file on /data/local/ folder of your tablet (with a file manager with root permissions)
launch "Android Terminal Emulator" application
and tape the instructions
su
mount -o rw,remount /system
echo "#!/system/bin/sh" > /system/etc/install-recovery.sh
dd if=/data/local/NameOfCWMFile.img of=/dev/block/mmcblk0p1
http://www.thinkpadtabletforums.com...nd-development/clockworkmod-recovery-for-tpt/
After a shutdown and reboot into recovery I had cwm! So I am able to do nandroid backups...
In this way, I would particularly like to thank to all devs that made the TPT root possible! Now i like my TPT 1000% more than before...e.g. no status-bar in lecture notes -> sooo great!!

I do get the following error maybe someone can help me out
[*]
[*]
[*]
/system/bin/mkdir: not found
/system/bin/mkdir: not found
cannot create /data/local/pwn-bak/install-recovery.sh.orig: directory nonexisten
t
/system/bin/mkdir: not found
699 KB/s (22364 bytes in 0.031s)
/system/bin/rm: not found
/system/bin/ln: not found
7. On the device, go to 'DISABLE BATTERY DISCHARGE' and select it. When complete
press (here) <ENTER>
Drücken Sie eine beliebige Taste . . .
it cant find the mkdir command very strange

I'm a little rusty, but are the / and \ facing the correct way? And are you in the correct directory? Not found usually means path is incorrect.

@rangercaptain
thats the commands from the root script. I didnt change them.
the commands are send over from adb shell and the tablet is in root directory i think.
When i go into shell and type in ls i get access denied error.

and you load the update zip and wiped cache before typing the commands, right? You have to do this every time you try to root...
Try to do it with another method. Don't do it directly trough adb shell...just type the shell commands in the cmd.exe
You just have to chance the directory in cmd, before executing the commands.
Then try not to input 'adb shell' before the shortened command, but the whole command as one line like:
adb shell "/system/bin/mkdir /data/local/pwn"
Perhabs it will work..?!?

@neos
yes i do the same procedure.
I also tried over cmd with adb shell "command" and also in shell.
Always the same error.
I looked into the system/bin directory and mkdir does have filesize of 0kb...

Full Root for Nook Glowlight

It took some doing, but after following the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=2559915
I was finally able to root my Nook Glowlight. The instructions are kind of sprawled out and extremely unclear so I will sum up.
As always, you will need the ADB. In order to install the ADB, you need the Java Development Kit and the Android Studio (formerly known as the Android SDK)
http://www.oracle.com/technetwork/java/javase/downloads/index.html
http://developer.android.com/sdk/installing/studio.html
How to obtain root via ADB: The ONLY way you can root is using Windows. I was successful on Windows 7 32 bit, but it may be possible on other versions.
step 1) install bootloader driver.
You need to grab the drivers from here (bnusbdrivers.zip):
http://forum.xda-developers.com/showpost.php?p=49665945&postcount=279&nocache=1&z=184593200683593
then, open the Device Manager (on Windows). Be ready to right click on the new device 'omap3660' that shows.
With the nook turned completely off, plug in a USB cable. you will have less than 3 seconds to right click the new omap3660 device that shows up in the system profiler.
If you were successful and you right clicked on it in time, manually install the Barnes & Noble USB driver (there are entries added to the generic Google drivers for both the TI Omap 3660 bootloader and the ADB device after you modify the uRamdisk later on)
***NOTE***
If you WEREN'T successful on your first try (took me THREE times to get to it in time), you aren't going to get another chance to install the drivers. At least not easily anyway, because after Windows tries to automatically install the drivers for the bootloader and fails, it will disregard the device any time it shows up after that. So, you are going to need to delete the registry entries that it created, which in my experience was easier said than done. Even admin access was not sufficient to make the necessary changes to the registry.
You will need to launch regedit.exe using another tool called psexec which is available here:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
after you download the pstools package, copy those .exe files to C:\Windows\System32\ (in order to add them to $PATH in cmd.exe)
Then, once you've installed the pstools commands to C:\Windows\System32\, run cmd.exe as admin (right click it and select 'run as administrator') and then open regedit.exe with the following command
Code:
psexec -s -i -d regedit.exe
Then, once regedit is open you need to find the keys created by the Nook bootloader and delete them. The Nook bootloader's device ID is 0451:d00e
You are going to be looking in HKEY_LOCAL_MACHINE\Current Control Set\enum\usb\ for the keys with the bootloader's device IDs. There may also be keys generated in control set 001 and 002 as well. Delete all of those keys and then reboot your computer. Then with the nook power off completely, repeat the process from the first step. eventually you will be successful installing the bootloader driver.
Step 2) temporarily boot with uRamdisk-noogie
you need to download omaplink.exe from here:
http://www.temblast.com/android.htm
and you also need to download the four files which allow you to temporarily mount the boot partition; omap3_aboot.bin, u-boot-ng2-exp-v03.bin, uImage-ng2-130-stk and uRamdisk-noogie.
They are available here:
http://forum.xda-developers.com/showpost.php?p=49779966&postcount=285
download usbboot-ng2-images-noogie-v1.zip
The next part is easy.
Extract the .zip file and then fire up cmd.exe. cd into the directory of the newly extracted .zip
in the new working directory, enter the command
Code:
omaplink omap3_aboot.bin u-boot-ng2-exp-v03.bin uImage-ng2-130-stk uRamdisk-noogie
Then, with the Nook powered all the way off and omaplink running, plug it in and a few seconds later, after the device boots up all the way, you will be looking at the contents of the boot partition instead of the internal storage like normal.
Step 3) Edit uRamdisk
you will need to download bootutil.exe from here
http://www.temblast.com/android.htm
copy bootutil.exe to C:\Windows\System32
with the boot partition mounted, copy uRamdisk to your computer and extract the files init.rc and default.prop, eg;
Code:
bootutil /x /v uRamdisk init.rc default.prop
then using notepad++ (available here: http://notepad-plus-plus.org/) edit the files as follows
default.prop
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
and
init.rc
comment out lines 375 and 392-399
(do this by adding a # to the beginning of the line)
uncomment line 215
(do this by deleting the # at the beginning of the line)
save both files and then repack them into uRamdisk
Code:
bootutil /r /v uRamdisk init.rc default.prop
copy uRamdisk back onto the Nook, eject the disk and power off the device. Reboot and you should be able to connect to ADB via WiFi
eg;
Code:
adb connect 192.168.0.10
replacing '10' with whatever IP your Nook is grabbing from your router.
Step 4) Full Root
at this point, you have root access via ADB only. You will not have root access in any apps like Root Explorer, Terminal, TiBackup, etc.
In order to finish PROPERLY rooting your Nook, you need to install 'su' to /system/bin/ and install the superuser.apk
Code:
adb connect 192.168.0.10
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
reboot your device one more time and then you will be fully rooted.
*** Note ***
this devices firmware seems to be a strange hybrid between donut and eclair, although it purports itself to be Android 2.1. The Superuser.apk and su binary came from an old Cyanogenmod 4.6 build in case anyone was wondering (Android Donut). The ones from Cyanogenmod 5 (Android Eclair) do not work. you will get the 'install failed older sdk' error.

installing busybox
I tired installing busybox by using the stericson busybox pro.apk. It would always freeze at 6.47%.
I figured out that if I grabbed an older version of the busybox binary and pushed it to /system/xbin manually and then chmodded it to the proper permissions, auto updates and proper symlinking work using the busybox app
Code:
adb shell mount -o remount, rw /system
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
Then reboot, and run the busybox app to update and create symlinks.
enjoy!

installing nano and bash
Code:
adb connect 192.168.0.10
adb shell
mount -o remount, rw /system
adb push nano /system/xbin/
chmod 6755 /system/xbin/nano
adb push bash /system/xbin/
chmod 6755 /system/xbin/bash
bash
mv /system/bin/sh /system/bin/sh.bak
ln -s /system/xbin/bash /system/bin/sh
chmod 6755 /system/bin/sh
adb push profile /system/etc/
adb push terminfo /system/etc/
and then in terminal emulator under 'Preferences' change the initial command to
Code:
export TERMINFO=/system/etc/terminfo;export TERM=linux;export HOME=/sdcard;
and finally
Code:
adb push bashrc /sdcard
adb shell
mv /sdcard/bashrc /sdcard/.bashrc
exit
nano works just fine via ADB, but because of lack of 'ctrl' key (and physical buttons to assign it to) you won't be able to write files (ctrl+o) using the terminal on your nook. But between having full proper root access, busybox, a proper bash terminal emulator and nano for editing config files, this should REALLY extend the usefulness of your Nook Glowlight. It should work just fine on other versions of Nook too.

Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.

As far as remounting /system as ro, I would HIGHLY recommend just rebooting at this point, otherwise your nook might be stuck in a weird pseudo-rooted state. Probably won't cause any problems, but why risk it?
Thanks for clarifying the line number. I will make the appropriate edits to my instructions. I was working off the top of my head and couldn't remember what exact line the ADB over TCP config was, as I just used ctrl+w '5555' to find it myself.
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
darz said:
Hi N00b-un-2,
Many thanks for your summary!
There is one important edit that I think you missed,
in init.rc you also need to:
Line #375, comment out "disabled" with a # at the start of the line.
(see http://forum.xda-developers.com/showthread.php?p=49070213#post49070213)
without this I couldn't get adb to connect.
And since you already made it very noob friendly, might I suggested you clarify:
Line #215 remove # to enable adb over wifi
(rather than search for 5555)
Also, I'm not expert, but I believe the commands to get superuser on the device are (at least it worked for me):
adb connect 192.168.x.x
adb shell mount -o remount, rw /system
adb push su /system/bin/
adb shell chmod 6755 /system/bin/su
adb install superuser.apk
Finally, I'm not sure if this is important, but maybe remount system as read only again:
adb shell mount -o remount, ro /system
Thanks again, nice work!
---------- Post added at 01:48 PM ---------- Previous post was at 01:10 PM ----------
Hi again,
had similar issues with installing busybox, here's what worked for me (note needed to run su to create dir):
adb shell mount -o remount, rw /system
adb shell /system/bin/su
adb shell mkdir -p /system/xbin
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk
cheers.
Click to expand...
Click to collapse

N00b-un-2 said:
There are several pre-edited uRamdisk images floating around the forum with various features enabled which would be easier for noobs than extracting the config files and manually editing and then repacking them. In the future I'll probably throw those on here as well.
Click to expand...
Click to collapse
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again

darz said:
Would have been good if I could have easily found a pre-edited image, but your instructions were a great alternative, thanks again
Click to expand...
Click to collapse
Sorry for the really noob question, I have rooted, wifi adb running and installed apps as per your instructions, but I can't seem to access any of it on the nook. How can I get access to the launcher I installed?
You mentioned pre-edited images, do any of those come with the apps I need to get access to a custom launcher?
Cheers,
Dariusz
==============
Updated: All sorted
==============
For some reason had some issues with ADW launcher, Launcher pro worked fine.
ps I think I made a mistake with the su step I suggested, if you run a one line shell command I don't think it keeps su privileges, so I believe you need to run commands within the shell as per below:
adb shell
mount -o remount, rw /system
/system/bin/su
mkdir -p /system/xbin
exit
adb push busybox /system/xbin
adb shell chmod 6755 /system/xbin/busybox
adb install busybox.apk

Noob
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?

The above instructions from N00b-un-2 should work fine running a vm with parallels on your Mac.
OB
Sent from my SPH-D710VMUB using Tapatalk 2

valentin1985 said:
Hey guys any instructions noob friendly or a video in youtube,i stick up at dab connect 192.168.0.10.I dos't have a Windows PC and using Mac whit Parallels Desktop.Is it possible instructions for Mac?
Click to expand...
Click to collapse
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]

darz said:
Before you perform the adb connect step you need to find out what your IP address is:
On your nook, click on the settings icon in the top right corner and then select "Change"
Under Wireless Networks, select the wifi name that you are already connected to (where it says "Connected to the internet")
This will display your connection details, remember that IP address
Now go back to your pc and type:
adb connect [IP address]
Click to expand...
Click to collapse
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?

thenookieforlife3 said:
BIG HINT! If you're using Powershell ISE, you have to type .\adb.exe connect [IP address] or else it won't recognize "adb" as an executable!
Don't ask why, because I don't know. :?
Click to expand...
Click to collapse
So far so good,but now what?

valentin1985 said:
So far so good,but now what?
Click to expand...
Click to collapse
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.

thenookieforlife3 said:
I just gave a little tip on Powershell ISE. I do not know much about the Nook GlowLight rooting process, as I have a NSTG, not a NG. Ask someone else.
Click to expand...
Click to collapse
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.

valentin1985 said:
Yes,i try whit dis command .\adb.exe connect 192.168.0.9 but result is the same.
Click to expand...
Click to collapse
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.

thenookieforlife3 said:
But that's okay! What I said was, if you are using the command program Powershell ISE, do it that way instead. But you are just using cmd.exe, not Powershell ISE!
In cmd.exe, which is what you are using, it is not neccessary to type .\adb.exe. Just type adb.
From there, ask someone else in this thread.
Click to expand...
Click to collapse
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there

N00b-un-2 said:
I prefer to use ConEmu or Console2 when I am forced to use Windows. Not a big fan of CMD.EXE or Powershell/PowershellISE. there are plenty of other CLI alternatives out there
Click to expand...
Click to collapse
Well, as I ONLY use Windows and Powershell ISE has a nice-enough layout for my purposes, I use it. That's why I gave a tip on it.

Actually on a lot of installs just typing adb in the command console won't work either unless it's got the path variable set up correctly, I find it easiest to just right click and choose run as administrator, no need for the path to be setup.
OB
Sent from my SPH-D710VMUB using Tapatalk 2

FW 1.2.1
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?

real-6 said:
Hi guys,
thanks for creating this thread. I was wondering if this rooting procedure was tested with the firmware 1.2.1 ?
Click to expand...
Click to collapse
This rooting procedure is for the new Nook GlowLight with firmware 1.3.1. Your device is a Nook Simple Touch with GlowLight, which can be rooted very easily using the rooting package here.