Hello, my Omnia II after a restart just didn't recognized my unlock pass..
The pass that worked for more than a year just don't work.
In the service center they don't pass the screen lock and they don't make a backup of my data (sms, etc)..
As I can't pass the lock screen, the computer don't recognize the phone.
Everybody talks about Hard Reset, but that way I lose my data
In Samsung center they just say that there is no "legal software" to do that.
I don't believe that the only answer to this is a Hard Reset, for example imagine the hypothesis of a phone that in a pocket turns on and by any change (almost null I know) puts a wrong code more than once and "locks" the phone.
A person cannot recover the data?
I just need a way to backup my phone in this state, before the hard reset so I don't have to lose all my data.
Thanks in advanced.
Nuno
Nobody???
Nobody. I have the same problem. Did you find a solution?
My phone suddenly refused to unlock with a code that I use for two years now. After several attempts it stopped reacting on the press of "unlock" button. The phone also stopped reacting on rotation.
I guess nobody has an answer for this question. Can anyone tell at least - does hard reset delete data from Storage card as well?
Related
My device has been working perfectly till suddenly & without any early notice the device has been locked with some kind of locking.
After reset the device goes into the locked status showed in the pictures, no option to do hard reset,
Tried all options, seems like one of the keys is defective and that’s why can’t perform hard reset.
The device is locked and the 90 minutes limit don’t go down, you can’t do anything.
However if there is a incoming call, you see it on the screen and you can answer the call.
Does anyone familiar with this lock screen ? how do i pass it & relase the device? please advise & help me ....
This is the password protection built into all versions of windows CE. (accesed form control panel/personal/security (or something like that, may vary with OS versions). It has options to lock the device after switching it off (going to sleep mode is considered switching off too), or after the device is not used for a given period of time. The whole point of this protection is to prevent unauthorized access to the device, so i think that without the password you're screwed
Did someone play with your phone before that happened? Maybe it was a "joke" by one of your friends? If you never set the password, anyone can enter the password settings applet and enable it. That's why it's always a good idea to set the password, even if you don't plan to use it -it is also required to enter security settings...
So, if you really want to HR, first of all make sure that one of the buttons is really defective - I just checked and you can't turn off the device by holding the power button when it's loched - this might be your problem. So try holding the comm manager and voice command buttons and press reset button on the side (keep the side buttons pressed until you get the "reset to factory defaults" question)
.
If that doesn't work, try checking if the device connects to activesync when it's locked. It shouldn't happen, since it would be a possible security hole, but knowing microsoft...
If it does you might try to flash its ROM (of course you would lose all your data).
And if it does not and one of the buttons really is defective you might have to disassemble the device in order to do a HR (by shorting the switches' contacts with some metal object), but i wouldn't do this if you don't have some experience with electronics, since you might damage the phone if it's not handled properly with case removed. It might be easier to go to a GSM repair shop and have the switch replaced.
itzik-g said:
My device has been working perfectly till suddenly & without any early notice the device has been locked with some kind of locking.
After reset the device goes into the locked status showed in the pictures, no option to do hard reset,
Tried all options, seems like one of the keys is defective and that’s why can’t perform hard reset.
The device is locked and the 90 minutes limit don’t go down, you can’t do anything.
However if there is a incoming call, you see it on the screen and you can answer the call.
Does anyone familiar with this lock screen ? how do i pass it & relase the device? please advise & help me ....
Click to expand...
Click to collapse
Forget all that password bs. Lock your device with this rogram. Unlock by pressing both soft keys at the same time.
Ok, I have an AT&T 8525 version. It's been upgraded to WM6 using the official patch, and the only other thing I had running on it was SPB shell trial version or something. I set a lock password, where when ever you turned the screen on you had to enter a password to access the device. With the Shell trial thingie it would actually give you the clock first, which was why I was trying it.
Now, my problem is this. I'm an idiot and my phone got dunked in water. I took it apart, well, took the battery out, SIM card, etc, anything I could get out without dismantling the whole phone. Took compressed air and blew on it until my can froze up and I had to surgerically remove my fingers from the can o' air (ok, exaggeration there). Anyways, if I call the phone, it rings and does what it needs to. The problem is that I can't unlock the stupid phone now. I'm not forgetting the number, it just won't accept it. I'm up to 8 mins of wait time before I can reenter it as well.
So, my question, is there a way to break the lock code without destroying the data on the phone? If no, how do I reset the phone completely? Do I have to do a hard reset? Can I take it to AT&T to get them to reset it?
And one big question, does the reset go past WM6 and revert to WM5?
Thanks all.
anything, anyone?
Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset.
Must be a "feature" not a bug.
*sigh*
Makes me pretty hesitant on ever using the feature again. I'm having serious issues trying to get it back to Syncing w/ my desktop and letting me access the device as a folder. Right now it's just powering up but nothing else.
How to reset the password
Ive just updated my rom to wm6 2days ago. Now im having the same problem...my device was set to auto off after 3min then when turned on... password prompt...i know the password...but was not accepted. Tried to re-flash wm6 but nothing happened. Anyone plsss help!!!! Thank you very much in advance!
Unit: XDA IIs,WM6 from Helmi & etc (thnk u very much guys ...u know who u r)
Re below post...hard reset did not reset the password tnx anyway
----------------------------------------------------------------
"Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset."
maria_terie said:
Re below post...hard reset did not reset the password tnx anyway
----------------------------------------------------------------
"Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset."
Click to expand...
Click to collapse
Hard reset worked for me. Only issue now is I can't get it to allow me to explore the device any more. It'll sync emails, etc, but won't let me access the device while connected to the USB.
The WM6 I used was the official version, not sure if that's a difference.
Hello,
Wondering if someone can help me, i have a very strange problem indeed!
I've just rest my device and when it came up with the Unlock screen to type in my unlock code (4 digits) I can press the buttons on the screen, and the code is typed in, but when I come to press any of the unlock buttons, they do the physical depress animation but it's as though they are not registering the click event.
This is on Mirri WM6.5 rom.
Any help would be appreciated, I also tried to use MyMobiler to use my mouse to try and do it, but as I last used it as Mass Storage, it won't connect as I can't get to set it as ActiveSync.
*Edit - Further update, if I dial 999, I can correctly press the cancel button, which means it's not that portion of the screen which is obscured, it's just the unlock, contacts, mail buttons that are failing to unlock the device. I receive no error messages when typing incorrect codes either.
Could it be possible a program has changed my password?
Thanks in advance folks.
D.
** HARD RESET DEVICE **
Too business critical to keep messing about, please leave comments if you have any ideas incase this happens in future.
I severely doubt your password has been changed. If you are unable to press unlock, it may be worthwhile performing a hard reset to see if this fixes your problem. Obviously backup contacts, emails etc beforehand as you should still be able to do this.
Hi,
I was unable to do anything with the device, so had to hard reset.
As the device was locked upon startup, the only thing i got was the enter device unlock code screen.
I know the changed password is a strange idea, but can't think of anything else unless my device is actually knackered... just finished hard reset now.
THEAnarch1st said:
Hi,
I was unable to do anything with the device, so had to hard reset.
As the device was locked upon startup, the only thing i got was the enter device unlock code screen.
I know the changed password is a strange idea, but can't think of anything else unless my device is actually knackered... just finished hard reset now.
Click to expand...
Click to collapse
Any joy after hard reset?
All seems to be working perfectly now, have lost a few days of txts since my last backup, but otherwise all up and running... very strange indeed!!
Thanks for checking back
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop
So guys, my daughter had an s8 as a pressie - so probably didn't set anything up except most basic. And she forgot her pattern, because she had the wonderful idea of constantly changing it. Anyway - I google and see hard reset as the only problem - however there is a problem there - we can't even be allowed to turn of the phone without knowing the pattern, because it has been restarted. So what do we do now?
install samsungg smartswitch on your computer .connect the phone and use smartswitch to reset the phone back to factory.
there is also a key