Database Users

[Q] Problems flashing WP7 (Any ROM)

Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!

Hi
WHat have you done so far and what have you come from?
I assume youve, hdpsl, radio, magldr then attempt to flash the rom?
What size cards have you tried?

Well I've flashed multiple MAGLDRs, i have a 2gb Micro SD card that works and a 16gb card that I believe is corrupted, but i'm getting the same result from both cards so I don't know if the issue is the MicroSD card.
I'm pretty sure i have the correct HSPL and radio because I flashed the original LEO70 rom way back in January and haven't really modified anything since then. I did load Android on the NAND, but I should think flashing the same exact LEO70 rom with the same laptop should work? So I don't think the HSPL or radio are the issues either.
Thanks for the quick response!

did you reformat your card before flashing wp7?

I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?

knollster said:
I'm trying that now... I just flashed a WMO 6.5 ROM and it works perfectly. My computer recognized the 200mb partition on both the cards but is having a hard time formatting the 16gb card (which is most likely corrupted). Is a 2gb SD card enough for WP7?
Click to expand...
Click to collapse
Yh it is barely, i had an old class 4 one, but it was pretty slow.
It would tell you its the card though, although i suspect it is the partition that is the problem.

It worked!
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!

knollster said:
Formatting the SD card worked! I went on the SD card website and downloaded a designated SDFormatter to fix the 16gb card, and thats what i'm using in it now. Thanks for the help!
Click to expand...
Click to collapse
No probs

help please
knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?

FilSex said:
hello, I have the the same problem. I have a original rom from htc, Hard SPL 2.08, Magldr 1.13, and already experimented with two different SD cards, format always the sd card before trying to flash the phone.
but the result is always the same
someone can help?
Click to expand...
Click to collapse
Hello, is your system win vista? Make sure that you are in Admin mode.

knollster said:
Whenever I try flashing a Windows Phone 7 rom to my HD2, i always get an error when it is about 3/4 of the way through flashing 4 partition. This is the error
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I tried it with both MAGLDR v1.12 and 1.13 and switched SD cards multiple times. I tried switching computers as well as cords. I even tried flashing and older version of LEO70 that I am positive worked months ago. Any ideas? Thanks!
Click to expand...
Click to collapse
Received my micro sd card through post today, so tried flashing a wp7.5 rom.
I get the same issue, and when the rom actually boots up it says sd card missing.
Now it's definately not the micro sd cards fault as before flashing the rom I formatted it, and it's absolutely new, class 4 4gb.
I've got the right version of radio and hspl..
What've I done wrong? I've tried flashing both HD2O© v2.00b5 WP7 TANGO 8773 and HD2 Pdaimatejam Rom Wp7.5 Tango 7.10.8773.98 v7.9
Can someone tell me what i'm doing wrong? Because I've had a fully functioning android 2.3.7 cm 7.2 rom on the device and that ran faultlessly.
Regards,
Edit: I did 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
and it's now working!

pethd2 said:
Hello, is your system win vista? Make sure that you are in Admin mode.
Click to expand...
Click to collapse
thanks for the fast reply. no my system is win 7, and I run as admin.

FilSex said:
thanks for the fast reply. no my system is win 7, and I run as admin.
Click to expand...
Click to collapse
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,

Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
and also check/reinstall WMDC if have any problems with usb drivers and recognizing HD2

Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
now works
thanks

FilSex said:
now works
thanks
Click to expand...
Click to collapse
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium

Tenpin said:
lol thought so, I think op's of rom threads should make it a little more clearer on the instructions part, as we've both realised it's so easy to miss the part out and **** up the entire installation.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
well done (although those instructions are in the threads hehe))

FilSex said:
now works
thanks
Click to expand...
Click to collapse
thks Work for me also

Thanks!!!
Tenpin said:
Hi mate try doing this on MAGLDR, go to Services, then click option 4. UseLast24NAND press yes
Then click on option 10 again, Services then option 5. ClearSD MDR.
After doing both those steps go onto usbflasher and flash the rom you wish.
Worked a charm for me.
Regards,
Click to expand...
Click to collapse
Thank you so much!!! I was going CRAZY!!!

Still not flashing
I tried everything above and it still refused to flash. I even started again from the beginning and it still didn't work. I formated the SD with SD formater, then I installed HSPL, I installed the Radio rom, wiped (task29), installed MAGLDR, went to 10. services, clicked option 4. UseLast24NAND press yes then clicked on option 10 again, Services then option 5. ClearSD MDR and finally, I flashed the Win 7.8 Rom.
Still got the message in the original post.
Please help!

[Q] Help!!!Fault to flash DFT's Green Mango

Wrong messages:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I has tried a lot of method,including reflash magldr 1.13 /task29/closed firewall...but it dosn't work! Who can help me? thx!

anybody help?

you have to open DWI.EXE in administrator mode.. right click.. open in Administrator mode (or something like this)

I'm having same problem... I have no idea where i'm going worng... are there any step ny step guide anywhere on this forum that ppl can link to... or perhaps a video that show the steps on how to install mange on HD2.. thanks

I had found the reason: there's some bad block in the nand,causing fail to write data into this block.
And, my HD2 couldn't be repaired by using MTTY. So ,I has to buy new phone to eat mango, perhaps samsung focus...

Thanks,but I'm using windows xp ,and flashing nodo quickly and successfully.

I found it's because of existing bad block at 2419 block,anyblock know how to repair the bad block? (I tried to use MTTY to repair,but failed)

because of bad block too ?

Dude ffs, Only one post is needed, You have a edit button. There is no need to post 4 in a row.

Had the same error, what worked for me was:
0. (just do it)
0. blow into micro sd card slot and clean the micro sd card itself. then try again
0. format micro sd card
0. try reinstalling now, if not --> continue
1. (task 29 and uninstalling HardSPL)
1. go into HardSPL and do a task 29 (format)
http://forum.xda-developers.com/showthread.php?t=644781
2. download the latest official winmo rom for hd2
http://forum.xda-developers.com/showthread.php?t=623283
3. extract the RUU_Signed.nbh and rename to LEOIMG.nbh, place this file on your Micro SD card (wich is empty of course)
go into HardSPL, and if you have done right, SPL will be installed and HardSPL will be removed
2. (installing HardSPL, radio and MagLDR)
4. download HSPL4 and install HardSPL 2.08 (http://forum.xda-developers.com/showthread.php?t=611433 (scroll down a bit))
5. install latest radio (Leo_RADIO_2.15.50.14**) (http://forum.xda-developers.com/showthread.php?t=611787)
6. install MagLDR 1.13 (http://forum.xda-developers.com/showthread.php?t=893618)
3. (install WP7 through MagLDR)
7. download rom of choise and install it through MagLDR
succes!

ruben302 said:
Had the same error, what worked for me was:
0. (just do it)
0. blow into micro sd card slot and clean the micro sd card itself. then try again
0. format micro sd card
0. try reinstalling now, if not --> continue
1. (task 29 and uninstalling HardSPL)
1. go into HardSPL and do a task 29 (format)
http://forum.xda-developers.com/showthread.php?t=644781
2. download the latest official winmo rom for hd2
http://forum.xda-developers.com/showthread.php?t=623283
3. extract the RUU_Signed.nbh and rename to LEOIMG.nbh, place this file on your Micro SD card (wich is empty of course)
go into HardSPL, and if you have done right, SPL will be installed and HardSPL will be removed
2. (installing HardSPL, radio and MagLDR)
4. download HSPL4 and install HardSPL 2.08 (http://forum.xda-developers.com/showthread.php?t=611433 (scroll down a bit))
5. install latest radio (Leo_RADIO_2.15.50.14**) (http://forum.xda-developers.com/showthread.php?t=611787)
6. install MagLDR 1.13 (http://forum.xda-developers.com/showthread.php?t=893618)
3. (install WP7 through MagLDR)
7. download rom of choise and install it through MagLDR
succes!
Click to expand...
Click to collapse
thx,but I have tried step by step , but failed at last.

Im having the exact same problem. I have tried almost everything. anyone?

Error when Flashing to WP7.5 (Again)

Hi,
I had tried flashing WP 7 more than once, and until now i get this error
On My notebook :
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description:
Info: .\RSPL\RSPL.cpp (956)
And on my HD2 unit, the messages are :
USB Flasher Mode
Wait USB...USB
Layout...PC=8, ASI=4, OASI=-1
Erase
[ASIZE] START" 365 END: FC0 SIZE: C5B
PARTITION LAYOUT NEW
0: 0219 02A9 10 25
1: 02A9 0319 10 25
2: 0319 0359 10 25
3: 0359 0365 10 25
4: 0365 0FC0 10 25
5: 0FC0 0FC8 10 25
6: 0FC8 0FCC 10 25
7: 0FCC 1000 10 25
Erase...
D S: 0 E: 219
D S: 1 E: 2A9
D S: 2 E: 319
D S: 3 E: 359
D S: 4 E: 365
D S: 5 E: FC0
D S: 6 E: FC8
D S: 7 E: FCC
Save EMBR...
Default OS is WPH NAND...
Flashing 0 partition...0 [219-2A9] M0 OK A23E 288
Flashing 0 partition...0 [2A9-319] M0 OK BC51 2F1
Empty 2 Partition...OK
Flashing 3 Partiotion...3 [359-365] M0 OK D840 361
Flashing 4 Partiotion...4 [365-FC0] M2
And it stoped..
I had search everywhere and i found some thread that write about the error, but when i follow the instruction it didn't work.
So what should i do ?
Thanks,
Ronald

did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head

assangflexx said:
did you tried with "use last 24 partition block" under services in MAGDLR ?
Just something what pops in my head
Click to expand...
Click to collapse
Yup, Including that one & didn't work
Also i Had tried Format the SD from my notebook but still, it didn't work
Additional information : I Use 4Gb MicroSd
Thanks,
Ronald

I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.

ikovac said:
I'd try with another SD card before anything else. Or if you can try installing without an SD card. I am not sure that this is possible with mango though, but older versions could be installed without an SD card. Just to see if it is causing the problem.
Click to expand...
Click to collapse
This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks

ronald_delgeano said:
This error happened when i use HD2O but didn't happen when i use XBMOD-Yuki ROM
What should i do ?
thanks
Click to expand...
Click to collapse
Did you try 'clear SD MBR' in Magldr?

mementototem said:
Did you try 'clear SD MBR' in Magldr?
Click to expand...
Click to collapse
I did that too and still got the error
thanks for replying,
Ronald

I found this thread interesting, for various reason, still a open question and google put it in the front line.
when this error apears in mi HTC HD2 was for a bad flash when i tried the windows mobile 7.8 (problems with the drivers on my windows 7 desktop or garbage in the nand i dont know).
so i tried reflash and always with maldrg 1.13 and a ROM, file and fail.
do the 24mB nand trick and clean SD card and still failing
do a task29 clean and still failing.
change SD and still the failing
and always maldrg put me the warning htc hd2 fatal hit 3 when i do the hardware reset
so my problems was solved with a SD ROM loading trick (load the ROM via microSDcard) with a important warning, do that cleaning ROM with the STOCK MANUFACTURING ROM ( if your cellphone was a telstra reload the telstra ROM with the SD trick, if your phone was vodafone reload the vodafone ROM with te SD trick, if your phone was a T.mobile reload the tmobile ROM with the SD trick etc.....) why, well it will clean all the NAND, including HSPL and the Radio version, and return to windows mobile 6.5 again. to restart and reload windows 7.8 mobile again and it works great.
so problem solved

[Q] formatted sd card, now won't work with wp7

I had setup wp7 to work with the sd-card, partitioned it for dual-boot with android.
Android was booting from the card, but it couldn't mount it so I (stupidly) used the sd-formatter.
It deleted all the partitions.
Well I booted wp7 to start setting up the card again, but wp7 just tells me to get lost as the card is now non-compliant.
Great!
Formatted the card with windows, still non-compliant.
Any ideas?

you must do hard reset or flash WP7 again....
simply, you deleted WP7 memory and WP7 cant boot without.... with hard reset or new setup after flashing, he create partition and memory again....

dxdy said:
you must do hard reset or flash WP7 again....
simply, you deleted WP7 memory and WP7 cant boot without.... with hard reset or new setup after flashing, he create partition and memory again....
Click to expand...
Click to collapse
Yeah, did it all over again, working now. Dual booting is fine now.
I had no idea that wp7 is so *****y about sd-cards :|

Hate to ask but could you elaborate on the steps you went through to flash wp7 and get the sd card to work?
If I remove my SD card or replace it with an identical card that is formated, it prevents my phone from booting up. I get the same message.
I've read the forums and they talk about task29, flash with 6.5, etc. Just trying to find a concise simplified method that won't leave me without a phone.
Thanks

only hard reset is needed when replace SDcard... flashing new ROM is only if you want upgrade with newer version...

**sigh**
this happened to me a few times already already & had to install WP7 all over again. BUT now I have another 16gb card & make an image file just in case
BTW how is the Hard reset done, in magLDR?
@vgsandman
this is what I did again, last night.
- Task 29
- Radio_15.42.50.11U_2.15.50.14
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP (some ROM will install in this method w/o Wmo)
....... Part error.......
.........error...........
Pdaimatejam rom gave this error, i guess it needed Wmo???
REDO again!
- Task 29
- Radio_15.42.50.11U_2.15.50.14
- MagLDR
- MagLDR Repartition 300/ 45
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
I also dual boot & i sometimes make a booboo when adjusting the partition so now the card wont work & do things all over again.
hth

That's why I don't use dual system.It's hard and troublesome when you upgrade.

0719andy said:
That's why I don't use dual system.It's hard and troublesome when you upgrade.
Click to expand...
Click to collapse
Now that I know the basics, it's not a problem. SD android is super easy to handle, wp7, well, I'll see.

Well it is not that hard.
Windows Phone 7 is using the SD as his Internal Memory.
If you check your settings and you do not change anything with the partitions.
You see that the Internal Memory is the exact amount of space of your SD Card.
So it is very logical that, when you format your SD card, you will loose your partition and WP7.
Also what I don't understand is.
When your phone is already that far with MAGLDR and Radio. (cause you did it once already) Why should you start over again?
It is very simple, just do the following:
When phone boot in MAGLDR use:
* 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
After that:
when HSPL and/or MAGLDR already installed.
Also if Pdaimatejam or CTRLPDA or HD2O ROM already installed,
you can skip all steps before step 2.
- when you turn on phone press and hold power button to boot direct to MAGLDR:
* go to 5. USB Flasher and run ENG_DWI.exe to flash ROM
(or EN_DWI.exe or TR_DWI.exe. ENG is installer in English, TR is Turkish)
- after flashing process done, and when show Main screen with Tiles,
do hard reset (Settings - About - reset my phone)
- run Connection Setup, with OK complete configuration and soft reset (restart) phone
- you are done... ignore next steps
Thats it!

OK so if the splash screen from WP7 shows the SD card error we can just go directly to
magldr
* 10. Services, 4. UseLast24NAND
* 10. Services, 5. ClearSD MDR
flash WP7 again? I thought we needed to clear the Nand again to be able to install the ROM again.

Well I never did that, and i can't remember that I cleared NAND from Android.
Cause I came from Android.
Also when I was upgrading my rom from PDA.... 7.5 to 7.7 I did not cleared anything with the cache or NAND.
They did not notified me that I needed to do this, not even in my instruction manuall.
If you want to, I can share you the link?

Please do so Mr-Dutch
thanks

Errors while trying to flash new ROM on my HD2 - [SOLVED!]

Hello everyone,
i have a problem setting up wp7/nativesd android dual booting on my HD2.
I've read all the guides and troubleshots but I don't seem to bypass my errors im getting.
So let me explain things, I own HD2 with 2.08 hspl and 2.15 radio.
My procedure:
A.)
1. Task29
2. install MAGLDR 1.13
3. (optional) repartition MAGLDR to system 300mb/45mb cache
B.)
1. (optional) services/uselast24nand and clearSD mbr
2. (optional) AD Recovery - working!
3. USB Flasher mode
4. Start DWI.exe (tried some: .., Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5, DFT Ultrafruit, H2O2)
Result: Procedure B/4 always fails with an error while flashing partition 4:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I get that error whatever I do. I repeat the steps from my Procedure A/1 and onwards with different (option) points written above with no success.
Can anyone please help me? I am desperate, seriously, already changed my HD2's motherboard and upper board for nothing - same problem persists.
Thank you for trying and reading!
PS.:
I've tried the above procedure with 3 SD cards, Samsung 16gb class 6, Transcend 32gb class 4, Kingston 8gb class 10. No luck

did you forget use last24nand in magldr? this not optional... this is important... be sure you confirm this step with green buttom
also check did you have activesync (XP) or WMDC (Win7/8, Vista) installed
also did you try flash WP without repartition of NAND? maybe this is problem

I did try it several times. As I said, those (optionals) are just the points where I tried to change whole procedure so I would make it work but I didn't. I DID try that 24mb nand 90% of the time. Currently I reflashed stock wm6.5 back and starting from begining. Will report to you.

It does work now! I think I did a mistake after I installed HSPL i always did task29 thank you for your help guys!
Task29 before instaling wp7 is not smart hehe