Related
i was running the button program and it stopped at 98% and the bar turned red. i did the recovery process and got the colored screen. after that i couldnt active sync phone with computer, i turned the phone off and now cant get it to turn back on. i am f$#%ed arent i
any help would be wonderful.
thanks
Which is your device,G3 or G4 ? well,if its a G3,then try to get into bootloaders (multicolor screen),if it gets there,try to flash Button's Rom again,but if its a G4,then I'm afraid it might be 'Bricked',still try to get into bootloaders,if it gets there,then its safe.
Cheers!
Don't worry i bricked my G4 like 3 or 4 times already but managed to revive it lol
If yours is a G4,
-enter bootloader ( i think camera+soft reset button) -- if you can't get into bootloader, maybe it's time to pay a visit to service center
-flash using wizard love ROM, just use the RUU included in the rar file, if you're not italian, just "Avanti" means something like next (http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar)
-After installation is finished and your device is alive again, install EnableRapi.cab and Cert_SPCS.cab
-SOFT RESET
-Let it reboot until you get into the today screen (ignore the ugly splash, that's the price you have to pay to get your device alive.. )
-Re-flash WM6 using Shelltool, read the shelltool documentation and make sure you don't miss anything.
I read there are easier method like soft and hard SPL, but never try. The above is what I always do when I brick my wizard.
its a g3
but the thing is everytime i try to turn it on, nothing happens. The first time, after it stopped at 98% i turned it off and got the bootloaders screen, but active sync didnt work, then i turned it off again and it never came back on. the next day when i got home, try to turn on and nothing. Also when trying to charge phone, no orange light shows up. anything you can think of will be awesome
thanks
chris
dead battery perhaps? try borrowing one of your friend's charged battery.
I bricked my wizard several times but never got to that "really dead" point.
The only thing I can think of is just, IF you managed to get that bootscreen again, and can have your wizard alive long enough to flash, don't turn it off again, but try re-flashing using RUU (they worked on bootscreen even though active sync is not connected). I also don't have experience reviving G3s, maybe another member with G3 can help?
ANybody can help me . i have a HD2 When tried to FLASH to any RADIO from 2.07 to 2.15 all failed at 96%. I have made a TASK29 also it fails at 96%. NOW cant install anything on it !
At first 2.15 flashed and after i made task29 it stop to install. Then i used 2.07 it flash, but again i used TASK29 and now when i retry to reinstall any RADIO, it fails at 96%.
Am using tasks29 because my HD2 is stuck in LOGO HTC. So am trying many ROM file for it to WORK but in VAIN !! I still can enter BOOTLOADER. Manage to install MAGLDR and WIN7 but never the phone was OK!
I was wondering if its a HARDWARE problem?
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Crust2 said:
It usually takes a long time at 96%. Try leaving it for a while and see if it will complete. Mine took some time at 95%
Click to expand...
Click to collapse
Yep, mine hangs at 96% too. Maybe try this Task29 with Radio (check it's the right radio though)...
http://forum.xda-developers.com/showthread.php?t=1018427
If you can get into BL dont worry you'll be able to flash. Just try everything again and give loader a moment.
Ok. I waited almost 30Mins ! is that ENOUGH?
But i Found that If i flash with this ROM (that has RADIO in it) - " Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_EN " flash succESSfully but still i have the PROblEM of STUCK on HTC logo !
Again failed at 96%
Hello,
has anyone managed to resolve this problem?
I am having the same issue - radio and rom flash fails at 96%, I have tried even older radios and different roms with radio. Tried with HSPL 3.03 and 2.08.
When flashing from USB it always stops at 96% at hangs for 15mins then says fail.
If flashing from SD card then it just hangs indefinetely.
only the Duttys_Leo_Sense finishes flashes but the phone wont boot
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
toreone said:
Download this, flash it and and start from scratch. something went wrong along the way..but start from scratch and go again.
If you have trouble once you download. restart the phone holding the the power and volume down buttons. and you will get into bootloader..then connect phone and wait until it says usb and flash.
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
Click to expand...
Click to collapse
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
nitko666 said:
Thanks - and a quick question - is this download for US or EU version?
I have a EU version.
Click to expand...
Click to collapse
I have not looked to see if it is for the US or EU HD2. But seeing as you have a EU HD2 you have nothing to fear really as the EU can be flashed with any radio version with no bad effects. But the US HD2 can not be flashed with any radio version with a 51 in it or it will be hard bricked. The 51 radio versions were the first radio versions for the EU HD2.
also, try chillign teh phone for twenty mins in teh freezer, then quickly reinsert the sd and try to flash. It may help you get past the last few %
Unfortunately it didnt end well
HTC HD ROM update from USB stalled at 8% for more than 30mins.
Then I tried updating it from SD card when it failed instantly reverting to factory SPL.
And then I tried to use HSPL4 to put: SPL-208 instead of HSPL208. Phone said cracked it and after that it died.
Its completely bricked now, cannot turn it on - no key lights, no lcd
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
slybunda said:
odd, these devices are very difficult to brick since if you mess up, just go into bootloader mode and reflash.
Click to expand...
Click to collapse
ahhh if only it was that simple. Check out the title of this thread, what you're suggesting is exactly what is failing. Look around, teh forum is stuffed full of this type of error. Sometimes it is solvable, sometimes not.
Hello, sorry for saying this but there is no solution to fix that. I had the same problem on friends HD2. It died with no reason, just rebooted. All you wrote is the same there, if you use newer radio stuck on 96%, older stuck in 97%. HSPL working ok, leoimg.nbh stuck on 8% and you getting ROM Update fail all times. That is hardware issuse and Radio ROM chip is damaged. We did not found any solution to fix that and even tryed xtc clip and all methods of instalation...
can u try flash HSPL first then the radio and then MGLDR...my problem is solve..
Hi.
I bought Hd2 yesterday, and I have a biiiig problem with it. It started perfectly - but after 5 min it shut down. It shows message about low battery, so I connected it into charger, orange led turned on. I tried to switch telephone on, but it freezes on white screen with HTC written. I tried soft-resets and hard-resets, even tried to install official rom - but installer is always freezing at 8%. I can get into BootLoader and phone is recognized by the PC after connecting USB cable. But this is all - i can't switch phone on, I can't install ROM...
What is wrong? Is it gonna work, or maybe it is totally bricked?
Radio flash stuck @ 96%
This seems to be the kiss of death for an HD2. I also have the same symptoms: stuck at 96% when trying to flash a radio. I have a US HD2 and I've flashed about 10 of these phones with no issues. This is the first one I've ever seen with this issue though. It was a friends phone that he wanted me to assemble. He gave it to me in pieces. When I assembled it, it wouldn't boot. So I flashed the stock ROM, but the flash won't complete. Fails at 8% or 11%. Tried flashing HSPL and it seems to work. But when trying to flash the radio it fails at 96% (it just hangs).
I was wondering if it has bad sectors on the partition or someting and if a J-tag service could fix this. Theoretically, it's supposed to be fixable if you can get into the bootloader. Oh well, into the junk box this HD2 motherboard goes until someone posts a fix.
I got the same problem can't not flash anything, and alway stucked at 96%.
Only thing I did to get it complete flashing radio, rom was put the phone in zip lock, and put in freezer for 10mins, took it out and plug in battery and flashing, at anytime, if the phone vibrating it will not accepting any data in, and it will stop at 96% and then i have to put in freezer again. Took me awhile to get everything boot up and got in windows 7 and play with it. But... the phone still rebooting it self, sometimes it will reboot after 5 mins or an hr when I am surfing webs or setting up the phone... Right now I am trying to get a different sim card to test out.
Seem more like hardware problem.
My problem is solved - I've got new motherboard....
NAND Toolkit
Have you guys tried to use NAND Toolkit?! it works fine for me, and never had issues flashing my HD2...
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
SS and HX in the bootloader screen just means Samsung or Hynix, , two chip providers HTC uses. They do the same thing, and you can forget about that for now, you have much bigger issues than one chipset being slightly better than the other.
The pink on black screen is a splashscreen, anyone recognise it? winmo? android?
The HTC website started dropping support pages for the HD2 a month or two ago, , looks like its ancient history as far as HTC are concerned.
Qualcomm MSM,,, this is a bad sign, , it is what the bare chipset presents itself to the usb connection as when there is no controlling bootloader. (This is what tmous users get when they radio brick their phones). Quite an odd symptom to see in a phone that powers on.
From the various power / boot symptoms, it sounds likely that one or more of the following are true
1 - the battery may be low on charge, and if magldr is installed the battery wont charge until android is running (which of course it cant) so you NEED to get magldr off ASAP (if in fact it flashed)
2 - the radio may be corrupted, which usually manifests itself as flashes failing at 8 - 10%, or radio flashes never completing.
3 - The phone may be one of the unlucky ones that has/is cooked/cooking itself. have a read on the 'freezer trick' where you cool the phone down for a while in a bag in the freezer, then quickly flash from sd as soon as you take it out, so the chips don't overheat before its done. If this turns out to work, then the phone has hardware issues.
4 - The bootloader itself may be corrupt, but only slightly (just theorising now) or the NAND memory where the bootloader is stored could be starting to degrade.
Recommended way forward.
Assuming you have access to a card reader,,,
send me your IMEI and an email address, and ill generate you a Goldcard.img,
follow THIS to make teh goldcard and place on that goldcard the RUU_Signed.nbh (renamed to leoimg.nbh) extracted from, , lets go for the WWE 3.14 rom from HERE (Lotta junk in that folder, scroll way down towards the bottom, look for filename as below)
id go for
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.zip
down towards the bottom.
(Thats assuming you want english? theres probably a DE one if you prefer)
SO, id try flash that from the goldcard, and report back.
(Note i'll be on and off all day, so don't expect an immediate response to your IMEI, cheers, oh and the .img when i send it will most likely get spam foldered, so dont miss it!)
I created a goldcard myself and tried the image inside "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.zip".
While flashing it showed me "RSA Fail" on "Radio_v2".
Any ideas? I'll try other ROMs till someone answers
Thanks,
iCEQB
EDIT1:
Trying "GER" Roms:
1 test) HTC_HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe - "RSA-Fail" on "Radio_v2"
Ahh radio fail, bad news. I've seen it cured once or twice, by flashing the phones original rom, but I suspect those were exceptions.
I've also seen failed flashes take when you well chill in the freezer (card sim and battery out while it chills) and quickly flash on removal.
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
samsamuel said:
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
Click to expand...
Click to collapse
Yeah I used the wp7 config. Is it bad? I mean, the goldcard works right?
test 2) RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe - "RSA-Fail" on "Radio_v2"
I'm out of ideas guys ... will wait for you to create me a winmo goldcard image and try them again.
Last resort is the freezer trick. Or any other ideas on how to progress from here?
Regards,
iCEQB
EDIT: BTW, does HSPL need to be deinstalled for these goldcard actions?
Ohhh hang on, that img i sent wont work, silly me, its not the imei I need, its the Cid (unique serial, uid, goes by a few names) of the SD card. See the howto I linked ya for how to find it.(really easy if you have access to any other winmo phone, not so easy otherwise.)
Just shows how long its been since I thought about goldcards.
Sorry.
Which branded phone is this?
Brother even I have same type of logo when phone starts (pink colour circle)
Even my phone is bricked but I can install wp7 or android (only no network problem)
Can u guide me how did u solve this issue pls
Thanks & Regards
SE_iCEQB said:
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
Click to expand...
Click to collapse
Do a jtag on it it will fix everything i think
Sent from my Nexus 7 using xda premium
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Before we start, you can ask him how his device has ended up like this, can't you?
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
Click to expand...
Click to collapse
Sir, you have forgotten your caps locked.
boxboy said:
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
Click to expand...
Click to collapse
Because you have stock SPL, you won't be able to install any custom ROM or any stock ROM not made for your region/SN.
boxboy said:
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
Click to expand...
Click to collapse
AFAIK, task29 is, also to be considered, a custom rom so it needs HSPL to be flashed. Are you sure you have followed the steps correctly?
boxboy said:
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
Click to expand...
Click to collapse
That is not a ROM, it's a radio. You need to flash HSPL to be able to change the splash screen (NRG Screen). HSPL should go like this: SPL 2.08.HSPL .
boxboy said:
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Microsoft is a corporation, Windows Phone is the OS .
One more thing, to be able to flash a LEOIMG from sd, the .nbh must be a rom that is compatible with your device (It will work if you get it from htc.com using the device's serial number)
I hope this helps. And I'm sorry if I am incorrect at something.
Good luck.
------------------------------------------------------------------------------------------------------------------------------------------------
To summarize it, you need to do either one of the following:
1- Install HSPL, and do what you want.
2- Go to HTC.com, download a rom using your Serial Number, rename file to .zip, extract the .nbh file, rename to LEOIMG.NBH [Capital letters], put onto sd card and insert into phone, boot up device while holding volume down ONLY, and make sure splash is removed and you're back to the "htc" stock, then send to repair [why?].
posting teh same post in multiple sub forums is considered rude
http://forum.xda-developers.com/showthread.php?t=1440265
Yeah, HSPL is needed for flashing pretty much everything. One thing you could do would be to flash a stock ROM from your SD card (just google it I CBA to provide links and stuff) which would reset everything to factory WinMo (including SPL to SPL3.03 [assuming you flash the latest ROM 3.14]) and from here it would basically be a fresh start. Probably the safest route without HSPL
Hi.
Thank you for your replies...
Let me tell u guys if I forgot to say earlier. The mobile phone is not letting flash any of the Hspl... be q series, 2 series or 3.series... all the times it says error 0000006 and 000000010 etc... a couple out of hundreds it did let flash but then it doesn't let me flash the factory rom fom HTC.
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
OK,
My final.outcome.
This phone let's me flash the hspl but it doesn't let me flush any roms including the original HTC factory rom.
I can also perform the task 29. Etc but still the NRG screen is still there.
I would like to know that if I flash the original Split and send it HTC, will be repairable for free? Sure? Even with the NRG.
now i think the only option available to you is jtagging the device which may permanently void the warranty !!
it had happened with me once, but somehow it got solved !
i used to randomly install clk, magldr, radios, hspl etc multiple times !
it used to get stuck while installing and then i used to remove the battery and try again !!
somehow it started ! !!
STRANGE DEVICE !!
Yeap its a real problem!!
Now , It will not let me change the hspl to spl whatsoever I do.
I would like your suggestions
I bought this brick for £50 and I can return it to get my money back. Has any used jtagging and does it 100% work?. The thing is if I do used jtagging, and if it doesn't work ,then I can,t return it!. How much does it cost and is it worth it?
jtagging will solve your problem !!
they remove the motherboard of the device and flash the os into the motherboard directly through a device named riff box !!
refer this video for more info !!
http://www.youtube.com/watch?v=zElsUERTzOU
but pls do not try this at home ! !!
just contact a local repair shop to jtag your device !!
also u can contact these guys from the video !!
good luck ! !!
boxboy said:
I have succesfuly flashed the 3.03 hspl... bit still no success in flashing any roms ... it gets stuck sometimes at 99% and sometimes at 0% and sometimes it comes up with a scrambled screen and stuck
Click to expand...
Click to collapse
Check that the micro USB connection isn't "wobbly".
I had a TMOUS HD2 and never had any issues. Then, I sold it and got a Telstra HD2 and had big issues getting ROMs installed until I realized that the connection at the phone was a little weak. I can't send any updates to WP7 via cab sender unless the phone is in a certain position to keep the connection from breaking.
boxboy said:
I bought an HTC HD2 FEW WEEKS BACK FROM ONE OF MY FRIEND.
I DO NOT HAVE THE HISTORY OF WHAT HE TRIED TO DO WITH IT.
BUT BECAUSE IT WAS STUCK/DEAD , HE GAVE TO ME FOR CHEAP.
NOW THIS PHONE IS UNDER WARRANTY TILL AUG-2012 AND IS FROM VODAFONE.
(EVEN AFTER INSTALLING ANDROID IT IS VOID)
HE MUST HAVE TRIED SEVERAL ROM/HSPL TO GET TO THIS POINT.
PROBLEM:
When I power up the phone, it displays a NRG LOGO SCREEN (energize software), and it gets stuck on it forever.
When I do hold the volume down + power button, then it comes up with the three colour screen and it says SPL-2.08.0000, AND also says rom update failed (only if i try to install and then start up)
The phone does connect through USB when it is on the three colour screen, but it does not let me install ANY OF THE romS or the spl'S...
I have tried literally every single step possible. I have tried to do task 29, i have tried install the original rom, i have tried to put the rom in the sd card and try it that way.. I have also tried to do hard reset... vol up and down and it does not complete either..
I best rom it let me install was 99% of 2.10.50.19.2.. but after 99% it got stuck .. it seems like it gets stuck within 1 min or so.. anything you do!
Some times after several hundred attempts, it does let me change the spl... as it was displaying 3.... before then i changed to 1.4..... and then to 2.08...
All i want to do is to get rid of the NRG SCREEN, so i could send to the htc ,, for repair ( i know that it is not under warranty if i used andriod, but they will not know) .. or is there any way to completely format the phone,,, is there any solution to install andriod or microsoft? pls help
Click to expand...
Click to collapse
Don't worry ... you can give the life to your phone back... it shows fail bcus u have 2.08.0000.. so it means u Sud have 2.08 v hspl.. so try flashing hspl by getting into bootloader(3 colour) by pressing volume down + power Then flash hspl.. but remember select 2.08v.. then again after flashing hold volume down + power.. bootlooder.. then flash magdlr 1.13 ... now the phone will boot into a black screen with written mangdlr.. wen the black screen magdlr screen comes then press power off for 5mintzz.. follow the guide to flash.. there is a stick thread in NAND DEVELOP... U can get the windows version back to your phone to get the warranty...
Sent from my HTC HD2 using Tapatalk
Ok ,, some good new at last ..
I have used the HSPL4 to change my 3.03hspl to 3.030000 spl...
Success, as when i go to the tri colour screen it says spl and no hint of hspl...
Bad news, is that i still cant get the rom flashing,, as it gets stuff at some point and mostly at 99%.. Have tried both ways through SD (leoimg) and through USB.
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
boxboy said:
Now final question is ... When i on the phone a big logo of NRG (ENERGIZE) writtten comes up and it gets stuck there.. the phone has SPL .. so it still under warranty to return it?.. I still have all the void sticker intact.
Click to expand...
Click to collapse
did you try to flash just a splashscreen as i suggested in your other thread? (they can be flashed alone, no need for a whole rom, , just like radios)
if you can get a stock splashscreen on there you are sorted.
Maybe try to download the original Software from HTC.
With you serial number you can get the latest windows for this phone.
Flash the Software you get from HTC.
If this is working ok you can try to install any Android ROM.
Read at first this
http://forum.xda-developers.com/showthread.php?t=905841
Try to understand and follow the steps..
But if you have even no luck with original Windows soft. You will also (maybe) have a lot of probs. with Android..
Thank you guys for all your help..
I have flashed andriod on several phones some time ago and I actually forgot the right steps to follow.
But this phone is unique is not letting me finish.
After following all the right steps, i wasnt able to install a rom succesfully even after installing the HSPL... and I am also not able to install the factory rom from htc on either the hspl or spl settings.
But i now got rid of the NRG screen and I have also installed the spl 3.03.. When you on the phone, it displays software upgrade failed..
So I have now sent the mobile to HTC as it is under warranty. I will then re-flash andriod following the right steps and see what happens!
Thanks again!
My mobile came back from HTC with a week.. Looks like a brand new one!
In the letter it says the replaced IMEI, PCBA, FL BD, W/O_ REGIONAL_ID, LEO
WOW
GREAT PHONE... ITS MUCH FASTER THAN THE PREVIOUS ONE FOR SOME REASONS
Ok so I mean I wanna say i'm proud of myself for getting as far as I did. I had a HD2 running on a NRG Energize rom. The touch screen was unresponsive so I got that fixed at a repair shop. Then it was having a problem booting and kept going thru this boot loop showing me NRG Energize over n over. I tried to run the t-mobile upgrade to the 3.14 but it got stuck at 8% and wouldn't go passed that. I ended up doing the extraction thing when u rename the nbh file to leoimg and got the phone to run the upgrade from that. I thought all my problems would be solved but the phone started up and as i was setting up my e-mail and stuff it froze and restarted. now its stuck on this stick together boot loop... I don't know what to do next, all i'm trying to do i get this phone working even if its at a stock capacity. Any thoughts i should do now?
So what i'm getting from searching the forums so far is that when i get back to the phone i should check the battery pins? can anyone confirm this? Cause the phone starts up but it'll freeze and reboot or just hit the bootloop from the time i turn it on. keeps stopping.
Yea battery pins should be the first check.
samsamuel said:
Yea battery pins should be the first check.
Click to expand...
Click to collapse
I checked the pins they look like they're fine... any other suggestions?