Hi,
I use the HTC ozone with 3volution rom 2, I googled and searched here got nothing.
Now the only one thing which I'm confused is : how to get the VPN connected to my VPN server. I have added the new VPN connection. I use the connects via "WAP network" and connects to " The Internet" . Also my server address and user name and password are correct, L2TP mode with shared password. Every thing was done. I can connect to the server with all devices include my laptops, ipod touch, BUT in this HTC ozone... Where to get it connect? There is no such a button or menu which let me connect? Nothing called "connect" at all in this devices. Maybe I lost something? please let me know.
Thanks
Related
Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip
Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.
Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks
Here you go...
Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)
Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks
What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?
Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip
I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!
Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana
I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian
i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?
same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]
Hi Guys!
I am unable to connect to my office vpn using my Htc touch HD. (Windows mobile 6.1) I have been able to configure my VPN by giving IP, Username and Password but not able to connect.i Get the error VPN server problems. verify your username and password is correct. If problem continues restart the device.
I have checked all the information and it is correct..still the problem remains. Anything that i might be doing wrong ?
I have configured Vodafone connect services on my phone for gprs/edge. i have no modems configured to my work network? Should i configure it same as vodafone and then try? It doesnt even work even on wifi..
Please suggest what should i be doing?
My office has a cyberoam UTM installed..do i need to enter any additional settings in it even if it works great with my laptop.
P.S. I am able to connect thru my computer with same settings but not thru HD.
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
PPTP on WM6 is a major problem. Especially if the server (and most do) required MPPE. Its one of the few niggles I have about WM. If you own the server your best setting up the conection using L2TP/IPSEC.
Or if you dont own the VPN server, and have a server laying around the house (as I do) you could set up your server to use the PPTP VPN then set there server as a Proxy, and connect WM6 to the server via proxy...so basically WM6>Proxy>VPN>interwebs
Hi Jagnet, Thank you for your reply.
Unfortunately i am not able to use Ipsec/L2TP in China, only PPTP works fine with blocked sites.
After trying many combinations, there is a step that i havent been able to figure it out.
Once i am in Start > Settings > Connections (tab) > Connections (icon) > Advanced (tab) > Select Networks, How do i select the WIFI connection in "Programs that automatically connect to the internet should connect using" opcion? . On the modem tab i only can choose "celullar line", "Celullar line (GPRS)" or "Hayes Compatible on COM1:", there is nothing about WIFI there, so when i try to connect at the vpn server specified in "Programs that automatically connect to a private network should connect using", the phone seems to be trying to connect via GPRS.
¿Any ideas?
Thanks
joaquinmora said:
Hi!
I have been trying to connect to my to vpn pptp server (witopia.net) for 2 days. I tried every combination that i could think, but there must be something i am doing wrong. I think the mobile is trying to connect to the vpn server through gsm because everytime i try to connect the gsm signal bars disappear for a few moments. How can i make sure that the vpn connection goes through wifi?
I have managed to actually connect to the vpn server, but i cannot access websites like facebook and youtube from the Leo (I live in China and they are blocked). I am able to access blocked services through my iphone and laptop through the same vpn connection.
Any suggestions?
Thanks
Click to expand...
Click to collapse
having similar issues with HD2. CMCC as well, in China.
I am getting a proxy IP address if I check on ipchicken.com, etc
but I am not able to open FB.
I am not using the PPTP option, but using their SSL service with
openVPN. but STILL not working..
right now on support chats with witopia.
VPN PPTP is simply broken in WM. It will work, but only with no encryption at all, which beats the purpose.
First of all sorry for bumping this old thread. But I have been looking and it seems kinda close to what I`m doing, oh a little new to vpn.
I have managed to sucessfully connect the HD2 via VPN in connections only when on the lan (outwith I need to contact O2 to get it enabled apparently). I setup a dialup connection in Win 7; HD2 says I`m connected to the VPN.
However heres the thing. Am I right in thinking that folders by default have to be shared. Therefore when using resco I can see network folders anyway, when connected to wifi.
So how would I prove that I can see folders shared to the VPN and not on the LAN as I cant seem to prove whether I`m seeing the folder via LAN and not on the VPN?
Sorry if its confusing but perhaps you get my drift? Or am I missing the point entirely....
Please assist.
1. My PC identifies the HD2 as Ad-Hoc and not as Infrastructure. Is it the case?
2. The WiFi router application registers only the WAP APN in the internet connections. I usually use the Internet APN, why is it not chosen?
3. On my PC, should I enter the 10 digits WEP key for all four WEP key slots, or just into the first slot?
4. When I try to connect, the HD2 prompts me to enter a Static IP address (no DHCP support). Where should I enter it? what mask and gateway addresses?
Thanks
anyone using that app?
I tried, but I can't. Unlike the original poster, it tries to connect to my MMS access point, of course there's no internet access there. I haven't been able to figure out how to make it work yet.
Mine works perfectly but only if the HD2 is right next to the computer. For some reason the range is ridiculously minimal.
sunking101 said:
For some reason the range is ridiculously minimal.
Click to expand...
Click to collapse
Battery drain, if the range was increased it would kill the battery.
I have the same problem as the first poster : I can't choose the correct 3G connection. Only one connection is displayed in HTC Wifi Router with one single radio button on its right and it's not the right internet connection for unlimited internet.
in order to choose the right APN, please choose SETTINGS>CONNECTIONS>CONNECTIONS>ADVANCED>SELECT NETWORKS and enter the right APN (Internet) in both tabs.
That will do the trick.
still, although HD2 is discoverable by my PC (in wifi Find networks), with a good reception level, my PC insists that it is an Ad-Hoc connection (no DHCP) and when I try to use Infrastucture (with the wep key), my PC cannot establish association (get IP address from the HD2) and it shows no signal level.
Please assist.
Zolom, thanks? I did that and it improved a bit the situation: now email clients work (pop) but web surfing still doesn't work. I didn't try yet other internet connections.
not working anymore
before i installed 1.48 everything worked perfect but after the upgrade it doesnt work anymore. now my computer can connect but the phone also connects to its own network.... very strange behavior.... tried to turn off wifi but that also turns off router. any suggestions anyone?
Voila I finally got rid of the "HTTP 403 Forbidden" error with a (partial?) solution.
I have installed user agent switcher (http://chrispederick.com/work/user-agent-switcher/installed/07/) for Mozilla on Windows Vista, and I entered the user agent of my ISP on my HTC HD2 . It works!
Questions:
- Is it possible to set the user agent on other browsers such as IE or Opera?
- I noticed the user agent is not necessary for pop3 email clients. Is user agent mandatory for other internet services, like Messenger, SIP, Skype, software updates, etc?
hi guys,
i am hoping i will get the solution for my problem from this forum if there is one on this earth.
i bought htc h2.i am trying to connect my htc to my wireless router at home but its not connecting to it.it has found my home network and trying to connect but doesnt connect actually.
I have a nokia n80 as well.i just need to put the wep key in that and it connects with the wireless dont know whats wrong with my htc.
when i go to the wifi setting and put the wep key in further details are as follows
netowrk to access: only access point
Network name: home
connects to: The internet
authentication : shared
data encryption: wep
network key : xxxxxxxx
key index:1
use IEEE 802.1 option is checked.
EAP type is smart car or certificate
here when i click on properties tab it says
"Cannot log on to the wireless network.this network requires a personal certificate to positevely identify you"
I have also tried aquiring the certificate but it doesnt retrieve it
i put the log in,password and server as my netgear's IP address.
on the wifi advanced settings in HTC it shows the MAC address but doesnt show the IP address .
please please help pme out here.i have spent hours sorting this out but not successfull yet.hope anyone experienced can help me here
Thanx in advance.
regards
any advice guys???please guide me into the right direction and i will try and sort this problem out by trial and error.
have u tried searching and connecting with wifi monster. im sure it should work.
uncheck
Use IEEE 802.1x network access control
thanx for the suggestions.before doing anythingele i hard reset the phone.and it is connecting to wifi fine now.