Related
Hi,
I've flashed my X10 with [ROM] CM 6.1.3 [V006] Kernel-010 [13-05-11]
and now it don't stop rebooting.
Someone know why it doing it??
My baseband is .58
Ps. I'm posting here because i'm new in forum and can't reply the post [ROM] CM 6.1.3 [V006] Kernel-010 [13-05-11] [Tweaked+Theme+Extras]
Thanks
This is probably because custom kernels ( i.e. if you have flashed the custom kernel ) work on baseband 52.
P.S Should be in the Q&A section.
Sorry!!
Next question will be there.
I'll try change BB now.
Be right back.
Edit: I tried this and nothing... continuous reboot...
another idea?
sbr.anderson said:
Sorry!!
Next question will be there.
I'll try change BB now.
Be right back.
Edit: I tried this and nothing... continuous reboot...
another idea?
Click to expand...
Click to collapse
Reflash the rom.
OmegaRED^ said:
Reflash the rom.
Click to expand...
Click to collapse
^What he said.
1) First wipe everything, factory reset, cache partition, format cache, dalvik cache.
2) Flash the ROM : http://www.mediafire.com/?7xwcdvyx8fw6cr0
3) If you are on baseband 52, flash the baseband patch http://www.multiupload.com/U020F08R3N
4) Then flash the hotfix http://www.mediafire.com/?2c27ssr123e7rrv
kozxmartt said:
^What he said.
1) First wipe everything, factory reset, cache partition, format cache, dalvik cache.
2) Flash the ROM : http://www.mediafire.com/?7xwcdvyx8fw6cr0
3) If you are on baseband 52, flash the baseband patch http://www.multiupload.com/U020F08R3N
4) Then flash the hotfix http://www.mediafire.com/?2c27ssr123e7rrv
Click to expand...
Click to collapse
Doing it now.
Edit: The problem continues...rebooting...
And I see the baseband appears "unknown baseband"
Install rom
Then bb52
Bbpatch
Reboot phone get signal
Install kernel
Reboot phone and let it reboot a few times it will get stable after about 5 times
Sent from my X10i using Tapatalk
WB's rom is using baseband 54 and above, meanwhile K010 needs baseband 52. Here are the steps :-
1. Fresh install the stock rom with SEUS.
2. Root & install xrecovery using flashtool.
4. Flash the X10_52_ChangeBaseband.ftf using flashtool.
5. Reboot into recovery and wipe everything.
6. Install CM_6.1.3_[v006].zip.
7. Install CMFix_v6_v61.zip.
8. Install bb patch cm5bb49.zip.
9. Install 2.6.29.6 FX k010 froyo FXR busybox in xbin v06.zip (get it on the first page of WB's thread).
10. Reboot.
I may be wrong, but shouldn't you just install bb patch?
If you have a memory card reader, use it to save the baseband patch via pc and then just apply it via xrecovery.
I'm sure this would work, try before reflashing rom.
Remember to backup just in case anything horrible happens.
Edit: when it says "unknown baseband" use dev tools-bad behaviour-crash system server. nd wait got reboot.
Sent from my X10i using XDA App
guys i have this ron in bb 54 (stock)... is it better on bb 52 and k010??? what does k010 will give me more than what i have now (stock kernel)??
Well..
I've tried a lot of times to do this rom run but no success...
Now i'm using another rom in .52 BB.
Thanks for help.
Hello.
I have installed the Defy Red Len CM10 Nightly Build.
I know there is a 2nd boot nightly build which provided a better solution than the non 2nd boot build
Can anyone provide a step guideline to upgrade / flash installation to the 2nd boot nightly build?
Thanks a lot
reaperhk said:
Hello.
I have installed the Defy Red Len CM10 Nightly Build.
I know there is a 2nd boot nightly build which provided a better solution than the non 2nd boot build
Can anyone provide a step guideline to upgrade / flash installation to the 2nd boot nightly build?
Thanks a lot
Click to expand...
Click to collapse
Here you go
if upgrading from previous CM10 builds:
1) Wipe Cache and Dalvik.
2)Flash Rom
3)Flash Gapps
4)Wipe Cache and Dalvik again & Reboot
and if coming from different builds(like CM7,CM9 etc)
1)Wipe Data, Cache and Dalvik
2)Flash Rom
3)Flash Gapps
4)Wipe Cache and Dalvik again & Reboot
Hope this helps you and ALWAYS MAKE A NANDROID BACKUP BEFORE FLASHING NEW ROM.
Thanks a lot. It works
Do you know how to the url for the Check update repo for 2nd boot build?
if you have CM10 from 24.09. and want jump to new kernel by Quarx you don't have to flash gapps ,in the other side yes you have to ,i recommended minimal gapps
yep¡ whit out gapss, for me works like a charm... the new build is 21.10
flashing........
Sent from my MB526 using xda premium
Defy MB525 green lense
NeoAven said:
yep¡ whit out gapss, for me works like a charm... the new build is 21.10
flashing........
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Does anyone know whether this build works on a MB525 with green lense as well, and can confirm that this is one build for 525 green and red lenses as well as for MB526 ?
Greetz.
I own a MB525, red lens, and I am using CM10 by Quarx (Sep 12th). So I just have to:
1) Wipe Cache and Dalvik.
2)Flash Rom
3)Flash Gapps
4)Wipe Cache and Dalvik again & Reboot
And, in today's release, then the update?
What about the kernel? Which one, and when? Thanks
EDIT: Oh, is it incluided in the ROM file now? Sorry, I don't quite understand what the differences are between classic CM10 nightlies and CM10 2ndboot nightlies (I know something about the custom kernel, but haven't found much information exclusively about it).
Please ask all questions in the Q&A section. Thread moved there.
I just followed these steps and now can't boot. I am able to enter the boot menu, but custom recovery just brings me back to the main menu, stable recovery does the same thing and stock recovery brings me to an android with a exclamation point in a triangle.
In fact anything I tap just brings me back to the main menu except boot and reboot.
Any ideas?
so the usual wipe and flash rom works even for earlier cm10 builds? i thought there was more than that (to install new custom rom.. flash some other files as well etc).. just making sure..
can u tell me the advantages? faster? more battery life? ........
General rulez to upgrade from CM10 24.09. to new qkernel :
1. Wipe's all data/cache/dalvik
2. install zip the newest/upgrede v4 from 27.10.
3. install gapps (all or minimal ) (the same gapps as 24.09. version)
4. do wipe's but only cache and dalvik
5. reboot
it's all enjoy
Question:
Whats the difference between 2nd boot builds and "non"2nd boot builds?
the new kernel gives as new possibility ,i can tell you technical staff ,but i use ROM before and after and i think that 2nd boot is faster and more stabile
Hi.
I'd like to upgrade to upgrade my Motorola Defy+ MB526 from Quarx CM10 24-09 (non-2ndboot) to 27.10 (2ndboot), but I'm not really sure of the steps. So I have to:
Open Stable Recovery
Wipe Cache, Dalvik and Data
Install zip from sdcard - 18.10 2ndboot build for MB526
Install zip from sdcard - update_for_18.10_v4.zip
Install zip from sdcard - gapps
Reboot
Is that right?
EDIT: Worked, done the following:
- Start Stable Recovery (of last Quarx non-2ndboot ROM)
- Backup all (Nandroid)
- Wipe data/factory reset
- wipe cache
- wipe dalvik cache
- install zip from sdcard -> 2ndboot ROM>100MB.zip
- install zip from sdcard -> update_for_xxxx_vx.zip
- install zip from sdcard -> GAPPS (I used PicoTTS (all))
- wipe cache
- wipe dalvik cache
- exit recovery
- shutdown
- Start Bootmenu
- shutdown
- Power on
- After first boot it rebooted but then it booted 2ndboot ROM perfectly.
Why is it that it should be shut down and restarted twice? Any particular reason?
Conzo427 said:
I just followed these steps and now can't boot. I am able to enter the boot menu, but custom recovery just brings me back to the main menu, stable recovery does the same thing and stock recovery brings me to an android with a exclamation point in a triangle.
In fact anything I tap just brings me back to the main menu except boot and reboot.
Any ideas?
Click to expand...
Click to collapse
same problem here...........
prashant_ch said:
same problem here...........
Click to expand...
Click to collapse
do this:
goto recovery,
choose stable recovery>wipe data>wipe cache>advanced>wipe dalvik
than flash http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20121018-NIGHTLY-mb526.zip
wipe cache and dalvik again
now flash http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_18.10_v4.zip
wipe cache and dalvik again.
and reboot
it should boot normaly,if not,than remove battery,and reinsert it after 10 mins,
first boot will take a little time,so dont worry.
if it boots perfectly than u can go into the recovery again and install gapps :good:
..
I normally updated CM9 to CM10 i dont wiped the data just cashes and then i updated to 2ndboot , Its like you instal a new rom from any kind , just you dont wipe the data . This worked for me.... I dont know it that will work for you , I have a defy + mb526 , hope it will work for you . But dont broke your phone .
defyus3r said:
Why is it that it should be shut down and restarted twice? Any particular reason?
Click to expand...
Click to collapse
its not necessary
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
battlepower said:
I normally updated CM9 to CM10 i dont wiped the data just cashes and then i updated to 2ndboot , Its like you instal a new rom from any kind , just you dont wipe the data . This worked for me.... I dont know it that will work for you , I have a defy + mb526 , hope it will work for you . But dont broke your phone .
Click to expand...
Click to collapse
DEFY cant be broken merely by flashing rom :fingers-crossed:
About the updates for 18/10, i need to flash zip or apply update?
Hello
Im having problems instaling the Aurora Rom.
I have a rooted U8800 with official GingerBread from Huawei.
I have installed Aurora 1.11 zip file and instalation whent ok
After instalattion I rebooted the phone and after loading huaweis logo the word Aurora apeared and nothing else.
I waited a few minutes but nothing else apeared it stayed only the Aurora word.
I have also tryed Aurora_1.8a zip (first file available) it whent the same way with exception not apearing Aurora word but Android nothing else loads after long minutes.
Is there any file before Aurora_1.8a zip ?
why does it stay in this way ?
Can anyone please help ?
Thanks
You can try install latest Aurora (5.0). You must have 5.0.2.7 or 5.5.0.4 recovery.
Instructions:
1. Download package to SD card
2. Boot to recovery
3. Full wipe (factory reset, cache, dalvik, battery stats)
4. Install package from SD card
5. Enjoy ICS!
Mlopik said:
You can try install latest Aurora (5.0). You must have 5.0.2.7 or 5.5.0.4 recovery.
Instructions:
1. Download package to SD card
2. Boot to recovery
3. Full wipe (factory reset, cache, dalvik, battery stats)
4. Install package from SD card
5. Enjoy ICS!
Click to expand...
Click to collapse
Hello Mlopik
Thanks for your quick answer
I have 5.5.0.4 recovery instaled
I will try Aurora 5.0 in a few minuts lets see how it runs...
Is Aurora 5.0 a full Rom or just an update to the previous versions ?
Do I need to install a older version than 5.0 first ?
Thanks
JPM :) said:
Hello Mlopik
Thanks for your quick answer
I have 5.5.0.4 recovery instaled
I will try Aurora 5.0 in a few minuts lets see how it runs...
Is Aurora 5.0 a full Rom or just an update to the previous versions ?
Do I need to install a older version than 5.0 first ?
Thanks
Click to expand...
Click to collapse
Well this is how it went...
I installed Aurora 5.0 experimental zip
The installation was ok but when I reboot the phone (after wiping all caches) the Huawei logo apears and than apears "Aurora Ice cream sandwich" and nothing else... it stay this way untill I take the battery out. It seems it doesnt load ...
what could be the problem ?
can anyone help ?
I have recovery 5.5.0.4 the phone is rooted ... Am I doing something wrong ???
thanks
This problem only happens with Aurora? Or other roms to?
Hello friends.
I have defy mb525 (motoblur, red cam),
I installed version CM7.1 and CM7.2 Jordan. I do all the commands Data / Cache Wipe and etc.. I install the ROM, install the gapps for GB, as described here in the forum, but when you start the phone, the google apps are not installed.
Tried with MIUI, based on 2.3.7, and also did not work. Already tested several versions of gapps, without success.
I tested with CM9, and this worked. However the version I got is unstable. And particularly prefer the 2.3.
Anyone know a solution?
Thanks
PS: sorry bad english
de-sp said:
Hello friends.
I have defy mb525 (motoblur, red cam),
I installed version CM7.1 and CM7.2 Jordan. I do all the commands Data / Cache Wipe and etc.. I install the ROM, install the gapps for GB, as described here in the forum, but when you start the phone, the google apps are not installed.
Tried with MIUI, based on 2.3.7, and also did not work. Already tested several versions of gapps, without success.
I tested with CM9, and this worked. However the version I got is unstable. And particularly prefer the 2.3.
Anyone know a solution?
Thanks
PS: sorry bad english
Click to expand...
Click to collapse
it's weird have you downloaded the gapps-gb-20110828-signed.zip from this link?
http://goo.im/gapps/
pochopsp said:
it's weird have you downloaded the gapps-gb-20110828-signed.zip from this link?
Click to expand...
Click to collapse
yes!!
steps
-In Recovery Menu -> select custom recovery
- Select “wipe cache partition” then “wipe data/factory reset”
- Select “install zip from sdcard”, “choose zip from sdcard”, then select “cm-7.2.0-jordan.zip”
- Select “choose zip from sdcard”, then select “gapps-gb-20110828-signed.zip”
- Select “+++++Go Back++++++” then “reboot your system now”
Click to expand...
Click to collapse
up for testing, got older versions, some news, and even more for other versions (ics, JB) ...
But it will not. Already on CM9, CM10, MIUI based 4.X without problems install.
Only in 2.3 that did not install. Not tested with CM6
:crying::crying::crying::crying::crying::crying::crying:
Any error message when installing Gapps?
Tried downloading Gapps file again, to be sure the file wasn't corrupted?
intemptesta said:
Any error message when installing Gapps?
Tried downloading Gapps file again, to be sure the file wasn't corrupted?
Click to expand...
Click to collapse
not. Appears that was completed successfully.
Already downloaded again in 3 browsers, by direct download manager and even on another pc. Already downloaded 3 different versions and nothing. it works with CM9, however it installs in CM7, consists in application manager, but the icons do not appear anywhere, as if it had been installed. I traded for several roms CM7, MIUI based on 2.3, and also did not work.
Here, try my Gapps http://db.tt/w9fznRBg
Not sure it's differ from one you use or not, but I always use it on Official CM7.2 and worked.
I'm on latest nightly CM7.2, same device as you.
intemptesta said:
Here, try my Gapps
Not sure it's differ from one you use or not, but I always use it on Official CM7.2 and worked.
I'm on latest nightly CM7.2, same device as you.
Click to expand...
Click to collapse
was the same as used, the official website. I'll download it and try it, but do not know what is happening.
edit: tested but did not work: (
Maybe try flashing back to stock 2.2.2 froyo, and redo everything again?
If this isn't work, I'm out of idea now. ^ ^;;
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
sasukay said:
Reboot to recovery>>wipe system, data, cache, dalvik cache>>install zip>>select MIUI zip>>reboot
Note: Sometimes, the MIUI rom shows error at first time. So again select install zip and select the MIUI zip, without rebooting.
Click to expand...
Click to collapse
I didn't reboot at all,did it just like above ^^
MASK10101012 said:
Hey there.So, I tried installing Miui 7 (weekly updated one) after following the steps accurately,but it says,failed to extract dir from system to system.I tried running it from both internal storage and external,and re-downloading it,but to no avail. Help please ?Oh, and I was running ED300's cm12.1 update 8 (now on update 10,which actually sucks very much)
Click to expand...
Click to collapse
Try to flash stock rom first then flash miui rom.
Hope this help
MASK10101012 said:
I didn't reboot at all,did it just like above ^^
Click to expand...
Click to collapse
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
I have same problem tomorrow.
I have same problem tomorrow when I was flashing ASUS ZenFone UI Rom.It was get error7 so I will try twrp 3 new version.But no effect then I will again flashed my old twrp and then flash it's work for me.
I were wipe cache only....(do not full wipe,system,data,internal former)
I hope this method is work.
sasukay said:
Okay, so try this, reboot into recovery, wipe the directories, then choose reboot to recovery from reboot option....then flash the MIUI zip
Click to expand...
Click to collapse
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .??
MASK10101012 said:
Okay so I need more help. I think I'll also be flashing phantom kernel.after installing miui. Haven't started yet but will soon. The problem is that I'm a complete noob with kernels. So... What are the things I'm gonna have to do ? CM12.1 just keeps getting worse with each update .����
Click to expand...
Click to collapse
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
sasukay said:
Just download the zip and flash it. And set the settings as mentioned in the phantom kernel post using Kernl Adiutor app.
Click to expand...
Click to collapse
OK I'll start soon. I hope I have no probs.. Thanks!