Related
http://android.modaco.com/content/t...ng-to-stock-1-19-before-applying-the-new-ota/
P
Seriously, did a mod edit my topic name to put a [Q] in front? (I removed it now).
Just because there's a question mark in the topic doesn't make the topic a question. IYSWIM.
P
do u HAVE to revert to the stock rom to apply the update?
Only if you've deleted stuff on /system.
P
after doing the flash paul, my phone is sitting at the black htc screen with the green indication bar full
'fastboot reboot'
P
thanks, this is my first droid flash. i prolly have flashed windows mobile over a thousand times
Hey paul anyway on doing your method without wiping? Don't wanna lose my launcher pro homescreen setup I got going on took me a while to do lol.
[G2/HTC Vision]
Hey paul did u update. I'm holding off on the update cuz I don't wanna risk never being able to get root
I did yeah.
P
How long should it take to flash?
Its been sitting on a black screen with HTC logo for 20 min
terminal shows:
./fastboot-mac flash zip PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip
sending 'zip' (126272 KB)...
http://www.mediafire.com/?s9ld7vag3fdm39g alternate link for shipping rom
mcp2009 said:
http://www.mediafire.com/?s9ld7vag3fdm39g alternate link for shipping rom
Click to expand...
Click to collapse
Oh YES! I was pulling my hair out waiting for the other to download. thank you
ikarma said:
How long should it take to flash?
Its been sitting on a black screen with HTC logo for 20 min
terminal shows:
./fastboot-mac flash zip PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip
sending 'zip' (126272 KB)...
Click to expand...
Click to collapse
If it's still on 'sending', you can pull the battery and try again.
P
When I try to extract the fastboot zip it errors me out. Downloading from my device. Not pc
Edit: guessing I'm suppose to use fastboot thru my pc? How does this work?
[G2/HTC Vision]
mine is sitting on htc screen with green progress bar which looks to be full.. is it okay to pull battery and try the update?
Fastboot
When I run fastboot-windows.exe on my computer I just get a quick flash of a black screen and then nothing.
Nevermind kinda went a different route and put the orginal rom on the root of the sdcard and named it to pc10img.zip and the booted into fastboot and then bootloader. It then flashed the zip, took a few min. Than put OTA on root of sd and named it to update.zip and entered into recovery and selected apply sdcard : update.zip. All went well. Actually is now booting for the first time havent even played with new system yet. Thanks for all the hard work that you devs do though. You make these phones bada$$.
Helpful Hint
If you have trouble getting it to "see" the device while in fastboot, just go to control panel, devices, install driver, and pick the one from sdk folder.
This was my first time using fastboot, so I had to do some digging around to figure it out.
Flashing via Fastboot (done within Windows, not the phone):
1.Download ROM and fastboot.zip from OP
2.Leave the ROM alone, and extract the contents of fastboot.zip into the same folder as the ROM
3.Start phone in fastboot mode; when phone is off, hold trackpad button and press power
4.The phone should go into the proper mode, now connect it to USB
5.Open up the command prompt in Windows (Start>run>cmd)
EDIT:6. I forgot to add this: you have to set the directory in cmd to the folder in which the ROM and fastboot files reside. The easiest way to do so is make a folder on the desktop itself, and type "cd desktop/[foldername]" into the command prompt, without the quotes.
7.Follow the last three bullets as listed in Paul's post
I already had the USB drivers for the phone when messing with adb. I don't know if that will affect fastboot; if it does, you'll need to boot the phone normally and connect via USB, download PdaNet onto your computer, and let it install the necessary drivers. Once done, then you may follow the remaining steps.
EDIT: See #6 for updated instructions; it is crucial to avoid the invalid command error.
EfemaN said:
This was my first time using fastboot, so I had to do some digging around to figure it out.
Flashing via Fastboot (done within Windows, not the phone):
1.Download ROM and fastboot.zip from OP
2.Leave the ROM alone, and extract the contents of fastboot.zip into the same folder as the ROM
3.Start phone in fastboot mode; when phone is off, hold trackpad button and press power
4.The phone should go into the proper mode, now connect it to USB
5.Open up the command prompt in Windows (Start>run>cmd)
6.Follow the last three bullets as listed in Paul's post
I already had the USB drivers for the phone when messing with adb. I don't know if that will affect fastboot; if it does, you'll need to boot the phone normally and connect via USB, download PdaNet onto your computer, and let it install the necessary drivers. Once done, then you may follow the remaining steps.
Click to expand...
Click to collapse
LOL! I had sat around and realized even though I used abd and shell... I had no drivers in fastboot. also after flushing type "fastboot reboot" or pull battery to finish.
I have steves 1.53 rom stored on my sd idk if theres a flashin app that can flash it from the sd on to the att Dell streak (non branded streak). Or away to flash on a mac and im having trouble with my windows xp flash!? Idk why, if someone can walk me through it. Im used to flashing HTC windows phones and even built my own version windows roms and also Iphone apps and I.OS ice built my own.... Come to think of it is there away to actually put a full fledged os on the streak or dual boot even to alow to get as much use out of this unit? Or even overclock it and how to over clock if you could walk me through it!?
Sent from my Dell Streak using XDA App
There are unix parameters for fastboot, that means that there must be a unix SDK that can be used in Mac OSX.
I have not seen any dual boot solutions.
And most of your questions are answered in this forum.
Try: Guide to Upgrading and Downgrading the Streak
Or the combination of:
NEW StreakMod Recovery
and
StreakDroid 1.6.0 ( aka Install-o-Rama ) Release Post
Yes you can do everything with a mac (i actually find it easier on a mac as you don't have to deal with drivers like you do on windows).
Go to developer.android.com and download the SDK for mac. Get the Fastboot file for mac (attached cuz i'm feeling nice) and drop that in your SDK/Tools folder.
Add the full path of the sdk/tools folder to your bash profile (search on google) so you can use the fastboot-mac, adb, etc commands from the tools folder in Terminal without being in that directory.
Once you got that, you have to know a couple terminal commands, basicly just how to navigate to the folder where you downloaded the streakmod recovery (google for "mac terminal commands cheat sheet" and you might find something useful.
Once you know how to navigate via terminal its as simple as flashing the StreakMod recovery. Put your device in bootloader mode (search or see the wiki) then in terminal it should be something along the lines of:
Code:
fastboot-mac -i 0x413c flash recovery recovery.img
Then to get into the recovery youd reboot your device after the flash
Code:
fastboot-mac -i 0x413c reboot
hold the volume up and down buttons, select option 2 (flash update.pkg or whatever) and that'll take you into the StreakMod recovery [if you get the dell logo with an exclamation mark in a triangle and nothing is showing, press the power button]
From streakmod recovery select Flash update.zip from sd card then select "select .zip from sd card" and then use volume up/down to scroll up/down and camera button to select and voila you are flashing a rom with your mac :S
Also before you flash the rom you might want to do a full nandroid backup incase your update messes up you can do a full restore and be exactly at the point before you attempted to flash your device.
Nandroid is under the Advanced option in the streakmod recovery.
Good luck
OH p.s.
EVERYTHING you need to know is on the forums/wiki/etc.
Please do a search, i know you have to read through a bunch of crap but its worth it. you'll learn a ton
i enjoy how he called it an ATT non-branded dell streak.
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
iphonepimp said:
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
Click to expand...
Click to collapse
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
peppi.nl said:
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
Click to expand...
Click to collapse
I didn't think on a mac you had to install drivers
peppi.nl said:
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
Click to expand...
Click to collapse
I'm running on a mac... I must be blind cuz i can't find a mac guide to install drivers...
First download android sdk from
http://developer.android.com/sdk/installing.html
install the application and then
then copy all the files in platform-tools to tools
export PATH=${PATH}:/Users/drgopoos/Desktop/Android/android-sdk-mac_86/tools
when u do this commands u can use wthout ./
open terminal
and cd the directory of the installation folder ( /Android/android-sdk-mac_86/tools )
this is the command for flashing
./fastboot -i 0x413c flash recovery recovery.alt.img
iphonepimp said:
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
Click to expand...
Click to collapse
Is your device in fastboot mode? Power off, power on holding camera button, when you get the white screen tap on fastboot on top left, then plug in streak to mac.
Sent from my Dell Streak using XDA App
ok, i was running 2.3.3 on my ns and finally got it unlocked then i decided to go for it and root it. my biggest mistake was not backing up anything after the unlock and then when i was rooting the phone it got stuck in the google screen
now i can get to the bootload screen but when i go to update from sd; it takes me there but i have nothing to back it up from
ive been trying to figure out a way to load a recovery backup to sd but the pc will not read the sd card anymore...
how can i fix this or am i stuck with an expensive paper weight?
please help
Question: Do you have clockworkmod on it?
(I figure you unocked and roote via adb/Fastboot - but if you can do it some other way and you did here they are]
Get ADB and Fastboot - figure out how the commands work (from Terminal/console/Command Prompt).
U need to put the files u want to flash (*.imgs in the same place as fastboot/ADB unless you're good a remembering your paths, if you have OS X simply drag and drop commands and files into terminal)
See if you can find a clockwork recovery image,
Download a stock rom - report back
Basically:
fastboot flash boot example.img
Fastboot flash recover example-recovery.img
that should work. I'll keep an eye on this thread.
After flashing CWR, go to mounts and storage and select mount USB storage, from there you can access your sdcard and copy files over.
The USB storage might take a minute or so to show up on your computer, if you're on windows go to my computer and click refresh until it shows up.
Sent from my Nexus S using XDA Premium App
been trying all day to do this and i cant seem to figure out the command prompt...as many times as i try cant get it to get anywhere.....tomorrow i will post pics of what the phone shows on screen
thanks for all the help
i do have a clockwork recovery but , not in the phone
i know that doesnt do any good and i did move files to adb but still would not do anything
redlilcivic said:
i do have a clockwork recovery but , not in the phone
i know that doesnt do any good and i did move files to adb but still would not do anything
Click to expand...
Click to collapse
Are you on a windows PC? If so I can give you all the files necessary and step by step instructions to fix your phone.
Sent from my Nexus S using XDA Premium App
yes i am on windows pc
please send if you can today ....i will not go to sleep until i have this phone up and running again
thanks
redlilcivic said:
yes i am on windows pc
please send if you can today ....i will not go to sleep until i have this phone up and running again
thanks
Click to expand...
Click to collapse
Here are the steps to get your phone back up and working:
1.Download this platform-tools.zip and extract it to your desktop
2.Connect your phone to the PC and enter bootloader mode
3.Press and hold Shift while right-clicking the folder you extracted 'platform-tools'
4.Click 'Open command window here' from the pop-up menu. cmd.exe window will open.
5.If the Bootloader is Unlocked continue to the next step. Type in the cmd.exe window 'Fastboot oem unlock' and follow the steps on the phone screen.
6.Type in the cmd.exe window 'fastboot boot cwr.img'.Your phone will restart and enter ClockWork recovery(CWR).
6.In CWR navigate with the volume keys and highlight 'mounts and storage' and select it by pressing the power button.
7.Then navigate down and select 'mount USB Storage'
8.On your PC, go to 'My computer' and press the refresh button until a 'removable disk' drive appears.
9.Double click on 'removable disk', You now have access to your SDcard on your phone!
10.Copy over a flashable .Zip Rom to the SDcard that you want to install on your phone, ie. Stock 2.3.4: Link(only for i9020T and i9023, dont install if you have i9020A), CM7: Link, etc.
11.Select 'unmount' in CWR when done copying files over. Then 'Go Back' to go to the CWR main menu.
12.Select 'wipe data/factory reset' in CWR and confirm with 'yes'
13.Select 'install zip from sdcard', then select 'choose zip from sdcard', then select the zip file you want to install and confirm.
14.Wait until the Rom installation is complete, then 'select reboot system now'.
15.Your phone will reboot and be up and running! Custom Roms tend to take longer to boot so be patient.
Let me know what happens.
WOW !!!
you are the man , i so appreciate it so much !!!
a couple of little things thoug....the android market not in the system and now when i try to mount the phone memory thru the pc wont mount.... do you know why?
thank you so much for all of your help !!!
redlilcivic said:
WOW !!!
you are the man , i so appreciate it so much !!!
a couple of little things thoug....the android market not in the system and now when i try to mount the phone memory thru the pc wont mount.... do you know why?
I suggest flashing cm7 stable.
thank you so much for all of your help !!!
Click to expand...
Click to collapse
Are you using CM7 nightly? I think it has a USB mount bug and the google apps including market are not in the CM7 rom and have to be flashed separately from the rom.
Sent from my Nexus S using XDA Premium App
USB Storage won't mount
The usb storage isn't showing up after I run cwm
Another restoration method you could try is using Odin to flash back to stock and retry the whole root process step by step ....I am on my phone right now so its hard for me to dig for threads but I know there are instructions and a stock Odin image floating about
Sent from my Nexus S using XDA App
ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.
nickcash said:
ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.
Click to expand...
Click to collapse
can you get into fastboot(power on pressing the volume up button and the power button together)?
simms22 said:
can you get into fastboot(power on pressing the volume up button and the power button together)?
Click to expand...
Click to collapse
yes, i can access clockwork mod also, but it the usb storage wont show up.....
Follow these instructions:
1. Slap self in head.
2. Power on phone while holding volume up&power button.
3. Now on the pc, Get the fastboot folder to the root of hard drive, I.E. C:\fastboot\. Also add to this folder your *.img files (radio, recovery, boot, system, data, etc.)
4. Open start menu.
5. In search box type cmd and press enter.
6. Now command window is open, type in that
cd C:\fastboot
fastboot flash * *.img
Replace the * with appropriate .imgs.
recovery, system, data, boot, radio.
Example
fastboot flash recovery recovery.img
7. Now that that is finished type
fastboot -w
fastboot reboot
8. Now the phone will reboot. BE PATIENT AS THIS MAY TAKE UP TO TEN MINUTES TO FULLY REBOOT INTO ANDROID!!! Disturbing it in anyway can cause corruption. I had this happen to my phone before. Literally walk away and come back in ten. Don't touch it, don't breath on it nothing. If you have any further problems either post here or PM me. Getting the .img files and fastboot is up to you. By the previous replies you should have them already.
Sent from my Nexus S using XDA Premium App
nickcash said:
ok my nexus is bricked and i followed the steps above with no luck. my pc wont recognize my phone, i can access clockword mod, but when i click mount usb storage nothing happens. im stuck at the google screen.
Click to expand...
Click to collapse
I think I had the same problem. first you need to check if your pc has the correct driver to accept the nexus s in bootloader mode. when that is done and you have colckword mod , you can but a custom rom on the sd card and flash that, then you'll be able to use your phone again.
So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!
ashmal411 said:
So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!
Click to expand...
Click to collapse
It sounds like you have a PD15IMG.zip file in the root of your SD card. That's what the bootloader is detecting when it asks you if you want to update or not. Remove that file and it will bypass the update step and take you to the bootloader main menu. There you can select recovery. From there, I would re-download your ROM installation file, full wipe (data, cache, Dalvik-Cache), and re-flash your ROM.
I tried that
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!
ashmal411 said:
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!
Click to expand...
Click to collapse
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up
mark manning said:
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up
Click to expand...
Click to collapse
I cant download anyting because i cant even get to my homescreen
ashmal411 said:
I cant download anyting because i cant even get to my homescreen
Click to expand...
Click to collapse
can you get into your phone using adb/fastboot?
flash recovery that way.
saranhai said:
can you get into your phone using adb/fastboot?
flash recovery that way.
Click to expand...
Click to collapse
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help
ashmal411 said:
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help
Click to expand...
Click to collapse
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there
saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there
Click to expand...
Click to collapse
here's the recovery image:
saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those.
Click to expand...
Click to collapse
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.
i cantturn on usb debuggiing because io cant get into my phone
TeeJay3800 said:
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.
Click to expand...
Click to collapse
lol thanks for the tip
ashmal411 said:
i cantturn on usb debuggiing because io cant get into my phone
Click to expand...
Click to collapse
was usb debugging on before..?
nope it was not on
ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
oh.... that's a problem...
ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
ok that's ok, you can still flash recovery through fastboot, which doesn't need USB debugging on.
so steps:
1) download the recovery image and rename to "recovery.img"
2) move the image to wherever your adb/fastboot tools are located
3) open command prompt (in windows)
4) cd to where your adb/fastboot tools are located
5) REBOOT PHONE INTO HBOOT, THEN CONNECT TO COMPUTER
6) manually scroll and select fastboot using the volume and power buttons
7) type
Code:
fastboot devices
to make sure your phone is detected.
8) if it is, type
Code:
fastboot flash recovery recovery.img
should give you two OKs.
9)once the recovery is in there, flash a rom on
I accidently wiped my whole phone, so there is nothing on it. So NO OS at all
How do i get the phone working??? TWRP is still on! cannot install stock rom
please help me....:crying:
zenn66 said:
I accidently wiped my whole phone, so there is nothing on it. So NO OS at all
How do i get the phone working??? TWRP is still on! cannot install stock rom
please help me....:crying:
Click to expand...
Click to collapse
1. First do you know what rom version you where on?, if you do know download that rom then extract from it the stock recovery using Huawei Update Extractor .
2. If there is two files of recovery just choose one, the one without any numbers. So you will have RECOVERY.img file.
3. Now make sure all files needed to recognize your phone are installed and adb is installed too. What you will need now is to push the RECOVERY.img file to the phone.
4. Connect the device to the computer and Put the RECOVERY.img file inside the folder where fastboot.exe is located. Then hold shift and right click to open CMD(command prompt) from there. Once CMD is open run the following code:
adb devices (This will show if your device is connected)
adb reboot bootloader (will reboot the device in bootloader mode)
fastboot devices
fastboot flash recovery RECOVERY.img
5. After this take the rom which you extracted the recovery from and put it in the memory card (dload folder)
6. When phone is OFF hold (volume up + volume down+ power key) together until you see Huawei startup logo then release. The flash process of the rom should start.
Rashad83 said:
1. First do you know what rom version you where on?, if you do know download that rom then extract from it the stock recovery using Huawei Update Extractor .
2. If there is two files of recovery just choose one, the one without any numbers. So you will have RECOVERY.img file.
3. Now make sure all files needed to recognize your phone are installed and adb is installed too. What you will need now is to push the RECOVERY.img file to the phone.
4. Connect the device to the computer and Put the RECOVERY.img file inside the folder where fastboot.exe is located. Then hold shift and right click to open CMD(command prompt) from there. Once CMD is open run the following code:
adb devices (This will show if your device is connected)
adb reboot bootloader (will reboot the device in bootloader mode)
fastboot devices
fastboot flash recovery RECOVERY.img
5. After this take the rom which you extracted the recovery from and put it in the memory card (dload folder)
6. When phone is OFF hold (volume up + volume down+ power key) together until you see Huawei startup logo then release. The flash process of the rom should start.
Click to expand...
Click to collapse
I am @work now so I will return after work .... I hope it will work
Do I have to install ADB on phone or on computer?
Thank you in advance.... I am a noob so hope this explanation works for me
zenn66 said:
I am @work now so I will return after work .... I hope it will work
Do I have to install ADB on phone or on computer?
Thank you in advance.... I am a noob so hope this explanation works for me
Click to expand...
Click to collapse
Make sure to install Hisuite app on the pc to get all huawei needed drivers , regarding ADB it is installed on the PC you can refer to this website. Before attempting anything please do read up about adb and how to flash files, because many things can go wrong.
Rashad83 said:
Make sure to install Hisuite app on the pc to get all huawei needed drivers , regarding ADB it is installed on the PC you can refer to this website. Before attempting anything please do read up about adb and how to flash files, because many things can go wrong.
Click to expand...
Click to collapse
TWRP can fash img files too..... Why is that not to be done? ??? why using ADB?
HI suite is on my pc already....
zenn66 said:
TWRP can fash img files too..... Why is that not to be done? ??? why using ADB?
HI suite is on my pc already....
Click to expand...
Click to collapse
No you need ADB to flash the stock recovery Twrp can't remove it self.
I am able to get stock recovery back in my Phone! .... so? than what?
my last working rom was B029.....
Sorry to be a noob.... ( not completely)
I never tried to put B029 recovery img on my Phone....
zenn66 said:
I am able to get stock recovery back in my Phone! .... so? than what?
my last working rom was B029.....
Sorry to be a noob.... ( not completely)
Click to expand...
Click to collapse
Follow the instructions i stated earlier. Put the rom the dload folder( inside it Update.app) in sdcard and flash it by turning off the phone and then hold( volume up+volume down + power) at the same time to begin the flash process or read the pdf file that comes with the rom after you unzip it.
:good: As soon as i got home i'll try! Thank you so much Rashad!:angel:
zenn66 said:
:good: As soon as i got home i'll try! Thank you so much Rashad!:angel:
Click to expand...
Click to collapse
i screwed up!!! fastboot/rescue mode Shows error!
recovery image failed!
so i cannot get into my phone... pc says waiting for device....:crying::crying: now what?
phone cannot be turned off!
OMG!!!
zenn66 said:
i screwed up!!! fastboot/rescue mode Shows error!
recovery image failed!
so i cannot get into my phone... pc says waiting for device....:crying::crying: now what?
phone cannot be turned off!
OMG!!!
Click to expand...
Click to collapse
Try to flash the stock recovery like the way i mentioned. Turn off the device by holding the power until it powers off and remove any usb connections to the pc. Then hold volume down and connect the usb to the pc until you see fastboot mode come up. After that enter the code i gave to flash the stock recovery and then follow the rest of the instructions.
I got the recovery into my phone. But i cannot get in to fastboot again... The screen i took pic is popping up.....
zenn66 said:
I got the recovery into my phone. But i cannot get in to fastboot again... The screen i took pic is popping up.....
Click to expand...
Click to collapse
Did you try to flash the rom from sd card.
I get into huawei erecovery... Than software is installing and stops at 90%....
zenn66 said:
I get into huawei erecovery... Than software is installing and stops at 90%....
Click to expand...
Click to collapse
You sure that the rom you are installing is the same before you formatted it?. Try a previous rom.
I was on b29.... Then i flashed till b209 than all the problems began..... How do i get into fastboot /rescue mode? Any solution?
zenn66 said:
I was on b29.... Then i flashed till b209 than all the problems began..... How do i get into fastboot /rescue mode? Any solution?
Click to expand...
Click to collapse
To enter the fastboot mode disconnect the phone from the PC. Shut it down by holding power until it's off. Then hold volume down and connect the phone to the PC at the same time.
It won't shut down.. Just restart. .. I will get in screen were you can wipe cache and do fatory reset and reboot. But no shutdown.... Sorry for all these questions. Thank you so much for all the help! ?
zenn66 said:
It won't shut down.. Just restart. .. I will get in screen were you can wipe cache and do fatory reset and reboot. But no shutdown.... Sorry for all these questions. Thank you so much for all the help!
Click to expand...
Click to collapse
First thing do a factory reset. after that keep holding the power button for like 2 mins it will power off. Then do what i mentioned earlier.
Rashad83 said:
First thing do a factory reset. after that keep holding the power button for like 2 mins it will power off. Then do what i mentioned earlier.
Click to expand...
Click to collapse
Its not shutting down.... tried the thing you said :crying: