Database Users

[HELP] Milestone 2 bricked (SBF Not Working, No Recovery, No Battery Charge)

Hey i will try to be as precise as possible. I'm posting in this section because in the general section the help isn't as effective as here.
Here is my problem:
A few days ago i flashed GB MIUI on my Milestone 2 everything worked perfectly and i used the phone a whole day. That night i've put the phone to charge and went to bed. Il the morning when i push the power button the phone didn't boot. I was stuck at the first M bootscreen (Red at the time).
I wasn't able to do anything no recovery the phone didn't seem to be charging so i decided to flash Stock FR SBF (One i used many times)
Once completed i let the phone tying to Boot for about one hour. After that i pulled the battery out and tried to get to recovery but no success. Holding the X button while booting wasn't getting me to recovery because the wouldn't get pass the First Moto bootscreen (Recovery open after that).
So i've flashed since then a handful of SBF from and-developpers:
2.2 FR
2.2 CH
2.2 UK
2.2.2 FR
2.2.2 CH
2.2.2 UK
2.2.2 Hong Kong
2.2 China
Official GB Leak signed
Still wasn't able to get throught the first moto bootscreen.
r2beta0 had an idea so if someone can please help me get through this. I think i'm done with flashing things...
r2beta0 said:
Hmm, I just had an idea that needs elaboration. As we know we can flash any partition of the phone using sbf_flash or RSD Lite. If his problem really can be solved doing a data wipe it would be also solved by flashing a new "empty" CG37.smg. It doesn't need to be signed because /data is not checked by bootloader. So, we need a Milestone2 /data empty image (CG37.smg). One could do a data wipe and take the image of with dd command, but it would be a HUGE file (6,5 GB). I don't know if we can use a smaller file just to clean his /data. Maybe someone can elaborate that.
Click to expand...
Click to collapse
dangpzanco said:
Maybe you can flash a modded SBF, with a modded CG37 and a new CG that points to addresses from the middle of data to its end, and make two partitions with data spare space for the dual booting project, is that even possible?
Well, at least when you pack and zip it the SBF won't be hard to upload.
PS: Does the Milestone 1 full SBFs have the data CG included?
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I tried holding X button while i plug the phone the Wall charger but no sucess either. I just can't get to the screen with the Exclamation point...
I've tried to be as precise as possible to help people who will or already tried to help me. Please don't delete my thread or move it after i've put so much effort in this...
I've search in hundreads of threads around different forum XDA is my last chance...
I thanks everyone who will take some time to help me or even at least read this.

I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here

r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I just did it no results still the same!
I don't think it looks good.
I didn't pull out the battery yet i wan't to give it a chance. I'll edit this post

Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.

Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)

r2beta0 said:
Something is very wrong with your phone. I think your best bet is to reflash stock SBF and send your phone to warranty.
Click to expand...
Click to collapse
Emacore said:
Did you try other options "dumb"? For example, change the simcard, change the sdcard, charge the battery with other alternative (universal charger)
Click to expand...
Click to collapse
I removed the sim card removed the sdcard, charge the battery with a milestone 1 avec two different charger. No results
@r2beta0 i think you are right i'll wait i someone help me until tomorrow evening if not i'll send it back to moto.

Have you tried to use sbf_flash on linux/mac?
Sent from my Milestone 2 XDA App

I think i'm going to try that. Will report later

r2beta0 said:
I don't know if this is going to help, but you could try that anyway:
- Download MotoAndroidDepacker (utility to unpack/repack SBF's)
- Choose one stock SBF (2.2 FR for example)
- Open and unpack it with the utility
- Rename CG66.smg to CG37.smg (you are going to use preinstall image as data image, both are ext3, but has different sizes. Don't know if it's going to work).
- Use utility to open folder with unpacked images and repack it
- Put phone in bootloader mode and flash the repacked SBF (rebuilt/firmware.sbf)
- Post results here
Click to expand...
Click to collapse
I have the same probleme .... And this don't work for me too.....

Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !

EVEALEX62 said:
I have the same probleme .... And this don't work for me too.....
Click to expand...
Click to collapse
I've tried Linux but no result... We are 3 french who have the exact same probleme it can't be Hardware?
Our Milestone 2 are somewhat different than others... I've phoned motorola for my problem today they told me to send it to a partner repair center but he warned me that if they discover i did something to the phone it will cost my a lot of money...
I'm sending it monday morning i'm really hoping for a solution before than...

Im not sure about service sbf vs the one that wipes user data. We have that kind of sbf for m2?
On the other side, looks like ROM chip go bad.

I'll ask some obvious question...you did not have any errors when flashing ? it always complete the process? Can you get into the bootloader when it print version 70.12 or 70.13 ?
Another obvious thing, did you verify md5 after downloading sbf ?

pat972 said:
Alex, same problem ? What happened ? with the rom MS2ginger ? Two french guys , it is weird ! Hope mine won't go that way !
Click to expand...
Click to collapse
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................

EVEALEX62 said:
No I go to MIUI yesterday... very bad news................................ I hope find a solution.............
RSDLite don't finish, I must deconecte and reboot bootlader manually and replug to got "pass" result !!
Bootloader is the 70.13
And the SBF is good because I alway use this file (don't download new)
.................. PLEASE HELP ..................
Click to expand...
Click to collapse
So it happenned both to us when we intalled MIUI so the problem is MIUI. Because i was using CM7 since Endless7 post the instruction avec Defy's ROM. And the phone was perfect...
We both have French Milestone 2 and i don't think it is my fault. I quite shure i did everything straight. I maybe a noob in dev or other things. But I have experience in flashing things...
My bootloader is 70.12 so it's different than Alex. And i used just like Alex the French Stock sbf i used everything i needed a freash clean install
When i flash i get to the "Please reboot phone manually" like everytime and then pull the battery go to bootloader and get finish

I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone

Motodoido said:
I had problems with miui too. After install MIUI and try back to MS2Ginger, phone dont boot, stuck at the first M bootscreen. So I try a full wipe and same problem, stuck at the first M. Mine bootloader was 70.12, so I flash the 70.13 and the spanish 2.2.2 sbf, and after a data and cache wipe, phone boot again.
Note: After flash a sbf, I dont remove the battery and pull again to get "Pass" on RSD Lite... just waiting to finish the process and disconnect the phone
Click to expand...
Click to collapse
My phone is supposed to have the 70.12 bootloader right? If i flash the new one won't the repair center see that i modified the software?
The is no 70.12 bootloader on and-developper so how do i get back?
My phone doesn't not get to PASS it never did even in past... Except when i could do a wipe data and cache before flash

If you flash the 70.13 you do not be able to back to 70.12, so think before. When RSD is in reboot your phone 30%, I always remove my phone and never have problems
If you want try, here is the 70.13

The bootloader for the sbf 2.2.2 is 70.13 ! I remenber well, i did the official update on a windows pc, and it started by updating bootloader! But it's good news and may be just some sort of sbf incompatibility with the bootloader...just find the correct ones?
Sent from my MotoA953 using XDA App

pat972 said:
But it's good news
Click to expand...
Click to collapse
What is the good news ????

Bricked Defy - Working only Bootloader after fail flash (error veryfying code group)

Hi
I had to flash my Motorola Defy to Official 2.2.2 Froyo Android, but during flashing appeared - error veryfying Code Group 32 checksum
I had 2.1 android before so I dunno why this error appeared.
I tried install another sbf's, usb drivers, install from another usb cabel and PC.
Everytime I got this same error.
I even tried install those sbf's from Linux CD (Knopixx) but this didnt work too.
If u have any idea's please help ;<
Ps. sorry for my poor english.

shockwave7 said:
Hi
I had to flash my Motorola Defy to Official 2.2.2 Froyo Android, but during flashing appeared - error veryfying Code Group 32 checksum
I had 2.1 android before so I dunno why this error appeared.
I tried install another sbf's, usb drivers, install from another usb cabel and PC.
Everytime I got this same error.
I even tried install those sbf's from Linux CD (Knopixx) but this didnt work too.
If u have any idea's please help ;<
Ps. sorry for my poor english.
Click to expand...
Click to collapse
Maybe the sbf's got damaged during download. Or the sbf's itself are broken. Try to redownload or use other sbf's.
Don't worry, as long as the bootloader's still working, your phone is most likely not yet bricked

Happen to me today so here is the sbf that I used:
http://www.mediafire.com/?vbcv0lhopulntx8
after that I installed 2nd and CMW and flashed CM9+++

yodawg said:
Maybe the sbf's got damaged during download. Or the sbf's itself are broken. Try to redownload or use other sbf's.
Don't worry, as long as the bootloader's still working, your phone is most likely not yet bricked
Click to expand...
Click to collapse
I downloaded maybe 5 same sbf and still this error appear.
Downloaded 15 another sbf's and nothing worked ;/
x-Moi-x said:
Happen to me today so here is the sbf that I used:
after that I installed 2nd and CMW and flashed CM9+++
Click to expand...
Click to collapse
I tried flash this sbf but again same Error veryfying code group 32 checksum...

Are you using the latest version of RSD Lite again(I did it with v5.6) and the latest version of the drivers.

x-Moi-x said:
Are you using the latest version of RSD Lite again(I did it with v5.6) and the latest version of the drivers.
Click to expand...
Click to collapse
I'm using RSD Lite 5.7 and new drivers and this file didn't want to flash ;/
Anyone have any other idea? ;/

Can anyone help me?
I'm losing hope ;/

shockwave7 said:
Can anyone help me?
I'm losing hope ;/
Click to expand...
Click to collapse
Do you still have warranty? Red or Green Lens? Any modifications made?
I could only repeat: Search for different sbf's and try them. Maybe reflash the kernel before that if it doesn't work.

yodawg said:
Do you still have warranty? Red or Green Lens? Any modifications made?
I could only repeat: Search for different sbf's and try them. Maybe reflash the kernel before that if it doesn't work.
Click to expand...
Click to collapse
Have red lens and I still have warranty.
I tried with so many sbf and any wont to work.
What do u mean: reflash kernel?

shockwave7 said:
Have red lens and I still have warranty.
I tried with so many sbf and any wont to work.
What do u mean: reflash kernel?
Click to expand...
Click to collapse
Hmm if you only did "official things" like trying to flash official firmware without any modifications then why not claim your warranty and send your phone to customer service?

@shockwave
Have you tried, to shorten the name of the sbf-file, in ABC.SBF.
Also you should put the shorten SBF in the program directory of rsdlite.
It sounds to me, that the string of the SBF is too long, so rsdlite creates errors while depacking the sbf for flashing.

yodawg said:
Hmm if you only did "official things" like trying to flash official firmware without any modifications then why not claim your warranty and send your phone to customer service?
Click to expand...
Click to collapse
I think I will do do that, but I wanted do it faster. On warranty I need to wait many time ;/

Do you flashed a defy plus sbf? I think that you upgrade your BL to 6 or 7. That's why when you put froyo it doesn't start

jmms94 said:
Do you flashed a defy plus sbf? I think that you upgrade your BL to 6 or 7. That's why when you put froyo it doesn't start
Click to expand...
Click to collapse
Nope, I will find some defy+ sbf I try to flash it.

shockwave7 said:
Nope, I will find some defy+ sbf I try to flash it.
Click to expand...
Click to collapse
I think you misunderstood jmms94. I think he thought you had already flashed a Defy+ build accidentially and that this would be the cause for your error!

yodawg said:
I think you misunderstood jmms94. I think he thought you had already flashed a Defy+ build accidentially and that this would be the cause for your error!
Click to expand...
Click to collapse
I tried install 2.2.2 Froyo for normal Defy not Defy+ at first time. I dont have any idea what i cant do more. I will try reinstall my RDS Lite and Drivers, again...

RATTAR said:
@shockwave
Have you tried, to shorten the name of the sbf-file, in ABC.SBF.
Also you should put the shorten SBF in the program directory of rsdlite.
It sounds to me, that the string of the SBF is too long, so rsdlite creates errors while depacking the sbf for flashing.
Click to expand...
Click to collapse
Have you already tried this??

yodawg said:
Have you already tried this??
Click to expand...
Click to collapse
Yep, same error... ;(

Did you repeat after trying hard reset?
Sent from my MB525 using xda app-developers app

Shafirul said:
Did you repeat after trying hard reset?
Click to expand...
Click to collapse
What is a "hard reset"?

help

I did a full wipe and turns to me in recovery and recovery hangs me nothing can be done I do not want to turn to choose, the total crashes
I 4ext Recovery v 1.0.0.4 RC3
Any ideas a little help

abra-kadabra said:
I did a full wipe and turns to me in recovery and recovery hangs me nothing can be done I do not want to turn to choose, the total crashes
I 4ext Recovery v 1.0.0.4 RC3
Any ideas a little help
Click to expand...
Click to collapse
Ok...I have to say that I got just 1% of what u said. But I guess that u are stuck with just custom recovery...if you were running a custom rom and u did a full wipe then u don´t have rom anymore. Get a rom to your sdcard and reflash...or just restore a nandroid backup.

In recovery mode, you can not do anything hung up and you can not select anything

I don't know, maybe if he tries flashing the latest 4ext? However, not sure how to get that done.
Before doing that, pull the battery, wait 5 minutes and see if it works.
Sent from a dream.

I did flash recovery and was able to upload a cool rom but does not work Is it possible to feel that he sat down but I do not know why Do something with the rom?

I have uploaded rom stopped working and touch and buttons at the bottom
Someone has an idea ?

abra-kadabra said:
I have uploaded rom stopped working and touch and buttons at the bottom
Someone has an idea ?
Click to expand...
Click to collapse
It is really hard to follow you. Many people in here are non native english talkers, but if knowledge of grammar is missing, try it a different way:
Break the things into small pieces and explain in simple words. Nobody will blame anyone for that.
1) Did you root and s-off /eng-off your phone?
2) Did you install a custom recovery system?
3) If yes, which one?
Then:
1) Which ROM did you install?
2) Did you read the flash procedures from that ROM first?
3) Did you follow that instructions in matters of
3a) - Needed Recovery Manager Version
3b) - Needed to run before wipe scripts
Then:
Did you download the right scripts and
1) checke their SHA/MD5 checksum?
2) Flashed them onto the sd-card
3) called them in the proposed followup from the ROMs description in your recovery?
So, if you can answer the list above in simple words people might be able to help you. If not me, somebody else will for sure.
Best regards
Astralix

abra-kadabra said:
I have uploaded rom stopped working and touch and buttons at the bottom
Someone has an idea ?
Click to expand...
Click to collapse
Try a different sdcard....that might be the issue. If the problem persists then may be a hardware problem. Try to get back to stock and send the phone to a service centre.

Help Helly Bean Stuck on Boot Cycle!

Hi Everyone
Got myself in a bit of a situation, Went to install the latest Helly Bean Rom Downloaded the file with the big button and put it on my external sd card, followed the step by step untill...
Install instructions:
coming from any other rom:
- make sure to have gingerbread bootloaders
- wipe data/factory reset
- flash allinone.zip
- reboot recovery
- flash allinone.zip again
- flash Helly_Bean_AddOn or Helly_Bean inverted AddOn ......here when i realized i hadn't got the file furthermore the file i have is named
helly_bean_initial.zip I couldn't find the other file and now my phone just bootloops.
Please give help me get the phone working again I don't know what to do and im panicking.

I9000NB said:
I couldn't find the other file and now my phone just bootloops.
Please give help me get the phone working again I don't know what to do and im panicking.
Click to expand...
Click to collapse
Download the files needed to your PC, than use CWM to copy them to your Phone in USB mounts and Storage , after that flash

xsenman said:
Download the files needed to your PC, than use CWM to copy them to your Phone in USB mounts and Storage , after that flash
Click to expand...
Click to collapse
Thankyou xsenman that sounds simple enough,:fingers-crossed:

Well that worked great its now installed and the new rom looks sweet.
Problem i have now is im getting "An invalid IMEI number could cause network issues including the inability to call" anyone seen this before ?
Just found this :
Everyone is having IMEI problems, here is how you fix it.
1) Get ES file explorer or root explorer
2)Look in sdcard/backup/efs
3)Copy nv_data.bin, nv_data.bin.md5 and nv.log to /efs.
4) Reboot and enjoy!
Ill post back after gym if it works =D

That should work. Actually a friend of mine had similar issue with his phone but from what I know this solution helped him to get rid of the problem
Typed with my I9001

tryed the above fix with astro manager from recovery and after file copy and reboot i still get imei error.
thanks for the post ruthlessrat, its good to know someone else has tried the above fix and its worked for them maybe others who stuble across this thread may be able to use it although i can confirm it did not work for me.
I'm assuming my nv_data.bin, nv_data.bin.md5 and nv.log were bad, I'm looking into a imei fix here
http://forum.xda-developers.com/showthread.php?t=881162 Hopefully this will resolve the last issue.
Edit: Good news I've got another phone to cover me for a while so I can work on getting this phone set up
how i want it, I think i may need to return to a stock rom, will this restore the imei ?
Edit2 : Reinstalled Gapps from thread : http://forum.xda-developers.com/showthread.php?t=1796675 this time its worked and Google play is now working fully so ive installed titanium backup and a few other applications that may come in use.
In the meantime alternate imei fixes and any advice would be useful on other cool features / functionality unique to JB. Thankyou to everyone again without the assistance it would have taken me allot further to get to this point.

I9000NB said:
In the meantime alternate imei fixes and any advice would be useful
Click to expand...
Click to collapse
Need a Solution, My Android Solutions

xsenman said:
Need a Solution, My Android Solutions
Click to expand...
Click to collapse
Funny you should suggest that ive come across your thread, thanked, rated 5 and believe it should be newsworthy that thread could turn into a real noob's guide, I like it very much. I tried the first suggestion of copying the files , afraid it didn't work.
Second to that i tried this :http://www.youtube.com/watch?feature=player_embedded&v=JqLK_2I-SBM
but unfortunately my nv_data.bin is pure "FF" in the hex editor so I assume this is some kind of default setting? anyone know ?
I am now going to try..
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
I'm going to use GB 2.3.6 from sammobile.com
Can anyone recommend an ICS rom ?
following this I will flash Helly Bean latest nightly again.
Edit: Well Ive flashed back to 2.3.6 JVU & used the JVU CF - Root which works great, Ive backed up my rom and ets folder ready for jellybean the problem is when running through the installation ui it gets stuck on the final " Helly Bean installed" screen after making your software selections,
When I click next to finish it just hangs and the phone becomes completely unresponsive. at this point Ive removed battery and restarted but alas I'm still on cf rooted gingerbread. I don't understand why as it worked fine before.
Ive tried clearing both cache's and reset, this made no difference.
Ive also reinstalled stock rom, re flashed CF-Root & Tried again with no success.
I'm going to look into ICS roms and post back.

I9000NB said:
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
Click to expand...
Click to collapse
try CM 9 first than on to JB or HB or any other Bean

xsenman said:
try CM 9 first than on to JB or HB or any other Bean
Click to expand...
Click to collapse
Okay been having a few issues installing CM 9 so i have installed CM 7 for the moment,
Trying to fix CM9 atm keep getting "installation aborted (Bad)"
Fixed/Update : Move files to internal storage, Installed latest CM9, Downloading CM10 Nightly
Update 2 : CM10 Nightly installed works great & GAPPS latest version from goo.im.
Thanks again xsenman without you this would have been allot longer process, I really appreciate it !
Thread End.

mb525 Help with ERR:a5,69,35,00,27

Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!

pikaetas said:
Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
Click to expand...
Click to collapse
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.

Zeroemd said:
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Click to expand...
Click to collapse
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?

pikaetas said:
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
Click to expand...
Click to collapse
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.

Zeroemd said:
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Click to expand...
Click to collapse
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.

pikaetas said:
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
Click to expand...
Click to collapse
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot

pikaetas said:
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
Click to expand...
Click to collapse
Well I am Glad your phone is alive !
anything you need PM me :good: