Related
Basically this is just a guide for those wanting to unlock their bootloader.
STUFF IN HERE
Updates, Contents, Disclaimer , Requirements, Recommended, Instructions (for both bootloader unlock and custom kernel flashing and relocking the bootloader), How to find out if the bootloader on your phone has been successfully unlocked , Benefits of Custom Kernel, Common problems, Myths concerned with unlocking bootloader.
___________________________________________________________________
Myths about unlocking bootloader
0. You can unlock your bootloader on a SIM-locked phone
1. Real dual touch for synaptic devices.
2. Higher max CPU overclock frequency.
3. Sim-unlock your phone (allow it to use any carrier)
____________________________________________________________________
Updates to this:
1. GUIDE UPDATE (finally lolz -- added new download links and made some edits)
Still using the old tools method -- more complicated to use but flexible (doesn't obligate stock to unlock, but please keep to GB and below)
My guide is not the simplest to understand, nor is it the most up-to-date, but if done and read correctly it gives you the most information about BL and kernels and also is quite safe .
========================================================================================
List of great guides
SETweaker tool -- Guide by faiyyaz: http://forum.xda-developers.com/showthread.php?t=1693308 (also deals with BL and kernels)
Lucastan96's index which contains a nice list of stuff: http://forum.xda-developers.com/showthread.php?t=1572591
XperienceX8's simplified guide on BL and stuff: http://forum.xda-developers.com/showthread.php?t=1549696
=========================================================================================
Hold your horses! Check if your phone will be hard bricked by the bootloader unlock process!
If your phone's manufacture date is 11W29 or PAST 11W29, DO NOT ATTEMPT TO UNLOCK YOUR BOOTLOADER. IT WILL MOST LIKELY RESULT IN A HARD BRICK (though some users managed to successfully unlock).
Original post by B.Jay here: http://forum.xda-developers.com/showthread.php?t=1481630
#####################################################
Before I start I must emphasise the fact that meddling with the bootloader is highly dangerous and will result in a hard brick if you don't follow proper instructions. Then, you will have to go and repair your phone by sending it to SE . I am not responsible if your phone dies on you because you didn't follow instructions or you screwed up somehow. I must also mention that this will probably void your warranty (rooting already probably voided it though) and that there is NO WAY to relock bootloader as of now.
Still interested? Details are below.
Requirements: Rooted phone, Sony Ericsson PC Companion installed in PC, Courage
You do not need to have a sim lock on your phone to unlock your bootloader.
Recommended: Disable your antivirus (it might find a "virus" in ADB.exe even though there isn't one and might even interfere in bootloader unlocking process) Use stock rom (I managed to unlock bootloader on GingerDX v013 though and users have managed to unlock it in Froyobread v23b and MiniCM7 2.0.7 | Don't try on ICS roms)
Note: Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it!
However, some users have reported that using msm7227_semc.cmd on their sim-unlocked phones did not restore the sim lock onto their phone. This has not been confirmed as of yet. Unlock the bootloader on your sim unlocked phone AT YOUR OWN RISK!
______________________________________
1. Download the files needed for the unlock. (Credits go to the_laser for this tool.)
Original Post: http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
One big bundle of files: http://upload.riicc.sg/viewfolder.php?hash=LVW5TS2ZSX
Download and extract the archive. Contains X8, W8, X10 mini and X10 mini pro stock kernels, the unlock tool and also the updated S1tool that can relock your bootloader!
____________________________________________________
1a. Download Flashtool too (needed for S1tool to work properly and for loading custom kernels next time) and install it (not necessary if you already have Flashtool):
Download and install Flashtool (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the .exe file inside and install your device's ADB driver (for W8 use the X8 ones) and the Flash mode drivers.
Then restart your computer.
Open task manager and kill any ADB.exe process you find in there and don't load Flashtool for the rest of the installation process.
_______________________________________________________________
Also, download and install PC Companion (not needed if you already have PC Companion on your computer) here (needed for the bootloader unlocking process).
Link: http://www.sonymobile.com/gb/tools/pc-companion/
Then just double click the .exe file and install PC Companion. Connect your phone to the PC after doing this and open Sony Ericsson PC Companion. Ensure that your phone is recognised by PC Companion.
_______________________________________________________________
Step 2.
Note: If your antivirus finds virus in ADB.exe, disable the antivirus. There is NO virus in ADB.exe and the antivirus will interfere in unlocking bootloader.
2a. Turn off your phone.
2b. Open the directory you unzipped S1tool to and run S1tool.exe. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flash mode (make sure you installed your device's drivers found in step 1a first). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
Example of output:
Code:
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
[B][U]9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"[/U][/B]
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45:49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
[B][U]9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE[/U][/B]
9/9/2011 21:45:49 Elapsed:36 secs.
If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT RECOGNIZED SIMLOCK CERTIFICATE, jump to step 3.
If the simlock certificate specified is NOT RECOGNIZED SIMLOCK CERTIFICATE, you can't unlock the bootloader of your phone. If you try, radio capability of your phone will be disabled (this has been reported to be untrue by a number of people who claim to have unlocked bootloader successfully with msm7227_semc.cmd).
Do note that the SIMLOCK certificate doesn't mean that you have/don't have a sim lock on your phone.
3. Disconnect your phone from the computer, boot it up, and then reconnect your phone to your computer.
4. Enable USB debugging on your phone.
Note: Don't run Flashtool and terminate any ADB.exe process you find in task manager before performing step 5.
5. If you had
1: the SEMC SIMLOCK CERTFICATE message or if you
2: unlocked your phone using EMMA/IMEI code
3: or if your phone was already unlocked when you bought it (first-hand phone)
4: or if your phone is sim-locked
___________________________________________________________________________
THEN
run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process. Alternatively, you could use Flashtool to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c). Go to step 5b.
If you
1. had the SETool unlock certificate
THEN
go to step 5a.[/U]
5a. Run msm7227_Setool2.cmd in the directory you extracted the bootloader unlock tool to and press any key to start the process. Alternatively, you could use Flashtool to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c)
5b. Open the example log included in the files. Wait 5 minutes. Then, compare the text in the window to those in the example log. They should be similar. Also, the last message on the window should be Press any key to continue. Note: It is recommended to turn off your antivirus before starting this as antivirus might interfere with the unlocking of bootloader on your phone (some antivirus software claim that there is virus in ADB.exe even though there isn't one)
Text in example log:
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
1743 KB/s (585731 bytes in 0.328s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
192 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
Second, we need to write semcboot ;)
1130 KB/s (596916 bytes in 0.515s)
successfully wrote 0003ff00
Press any key to continue . . .
Note: If your log is very different from this please check if your bootloader is unlocked using step 7. If it is not unlocked, turn off your antivirus and repeat step 5 again. If you get some "error: protocol fault" messages, that is completely fine, this is because the "problem" is that your phone was still rebooting and USB debugging mode is not turned on when rebooting so it couldn't acquire the status and had an error. If you get many "Access is denied" messages, turn off your antivirus and try again. Some users reported that the "Access is denied" messages were eradicated and they successfully unlocked their bootloaders after turning off their antivirus.
5c.
Start Flashtool, connect your phone and then wait for your phone to be recognized.
Then, go to: Plugins/(insert device name here) Unlock/run
A screen will pop up and ask you to connect your phone in Flash mode
1. Unplug the USB cable from your phone.
2. Turn off your phone.
3. Press and hold the "Back" button on your phone.
4. Plug in the USB cable to your phone.
5. Release the "Back" button after the screen that popped up disappears.
The unlocking process will start.
Wait until Flashtool asks you to disconnect the cable off the phone, then turn on the device and connect the usb cable once again.
Wait for Flashtool to push the required files to your phone.
After a while, Flashtool will have 4he message "Successfully applied unlock" and the phone will reboot.
______________________________________________________________
6. Disconnect your phone from the PC. Congratulations, your phone has an unlocked bootloader now!
7. To verify if your bootloader is unlocked successfully, again, use S1tool found here: http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26.
Direct download link: http://upload.riicc.sg/viewfolder.php?hash=LVW5TS2ZSX
Also, download and install Flashtool here (follow instructions on the website): http://androxyde.github.com/Flashtool/
e0D
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the .exe file inside and install the ADB drivers for your phone AND the flash mode drivers (needed for S1tool to work).
After downloading s1tool and extracting it to an appropiate location on your PC (not needed you already have S1tool), shut down your phone.
Open s1tool.exe found in the directory you extracted s1tool to and then click IDENTIFY button.
Boot your phone into flash mode (Press and hold back button while connecting it to your PC using an usb cable. The LED on your phone should flash green). Continue holding back button until you get some output.
Example of output:
Code:
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
[B][U]9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"[/U][/B]
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45:49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
[B][U]9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE[/U][/B]
9/9/2011 21:45:49 Elapsed:36 secs.
If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader has been unlocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader is NOT unlocked .
Note: The value of the "$" is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
the_laser in the bootloader unlock thread said:
unlocked bootloader require unlocked loader, yep ?
loader\loader.sin is special unlocked loader, which will be accepted ONLY after your "unlock" semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. "r8A029"
Click to expand...
Click to collapse
____________________________________________________________
HOW TO RELOCK BOOTLOADER :
0. Flash back stock kernel using "Repair" option in SEUS or by using Flashtool (if using Flashtool either flash stock firmware or flash the appropiate .ftf file below):
All the stock kernels (for W8, X8, X10 mini and X10 mini pro):
Download link: http://upload.riicc.sg/viewfolder.php?hash=LVW5TS2ZSX
_________________________________________________________
If you relock your bootloader while using a custom kernel your phone will be bricked!
1. Download S1tool and extract it to an appropiate location on your PC (not needed if you already have s1tool) . (Credits go to the_laser for this tool)
S1tool post: http://forum.xda-developers.com/showpost.php?p=17374120&postcount=26
Direct download link: http://upload.riicc.sg/viewfolder.php?hash=LVW5TS2ZSX
2. Then, download and install Flashtool (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the .exe file inside and install the ADB drivers for your phone and the Flash mode drivers (needed for Flashtool to work).
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
7. To check, open s1tool.exe, click IDENTIFY button, turn off your phone, connect it in flash mode to the PC (press and hold back button while connecting your phone to the PC. The LED on your phone should flash green).
8. Continue holding back button until there is some output.
Example of output:
Code:
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 X0eria NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
[B][U]9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"[/U][/B]
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45e3A49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
[B][U]9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE[/U][/B]
9/9/2011 21:45:49 Elapsed:36 secs.
If the line RUNNING S1_EROM FROM VER "#8A02$" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A02$"), your bootloader was not successfully relocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A02$"), your bootloader has been successfully relocked .
Note: The value of the "$" is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
the_laser in the bootloader unlock thread said:
unlocked bootloader require unlocked loader, yep ?
loader\loader.sin is special unlocked loader, which will be accepted ONLY after your "unlock" semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. "r8A029"
Click to expand...
Click to collapse
____________________________________________________________
9. How to flash custom kernels:
a. Download the (kernel name).ftf file provided by the kernel developer
b. Download and install Flashtool here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the .exe file inside and install the ADB drivers for your phone and the flash mode drivers (needed for Flashtool to work).
Then restart your computer.
_______________________________________________
c. Put the (kernel name).ftf file in the /firmwares folder. (Don't flash any .sin files, flash only the .ftf file.)
d. Open Flashtool.
e. Click Flash.
f. Select (kernel name).ftf.
g. Turn off your phone.
h. Connect your phone in flash mode (only when the popup window prompts for you to do so). (To boot into flash mode, press and hold back button while connecting your phone to the PC using an usb cable).
i. Disconnect your phone (do so only when the popup window to prompts you to disconnect your phone).
j. Reboot and you have a custom kernel!
k. Confirm by going to Settings --> About Phone --> Kernel version. It should have the name of the kernel you flashed.
m. To flash back to stock kernel, download the appropriate file below and follow steps listed above.
All the stock kernels here:
Download link: http://upload.riicc.sg/viewfolder.php?hash=LVW5TS2ZSX
_________________________________________________________________________________________________________________
Benefits of unlocked bootloader: Custom kernels, recovery in kernel (no more accidents involving formating /system and having to reflash stock because recovery is gone), GPU overclock, swap support, modules loaded in kernel, conversion of /system etc to ext4 resulting in faster phone, USB host support, full support for custom roms.....
The possibilities are -nearly- endless .
________________________________________________________________________
===============================================================
Troubleshooting section:
Common Problems:
1. My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
2. I get lots of "Access is denied" messages while unlocking!
Ans: Disable your antivirus and try the unlocking process again. Antivirus finds a virus in ADB.exe even though there isn't one!
3. I get some "error: protocol fault" messages!
Ans: It's normal and this isn't a problem. This is because the tool is inquiring for your phone while the phone is rebooting. USB debugging mode isn't on when phone is rebooting so it causes some errors. Eventually, your phone will connect with your PC so this is not an issue.
4. I get some "exec /system/bin/sh failed" messages!
Ans: Reroot your phone using SuperOneClick and try again.
SuperOneClick link: http://forum.xda-developers.com/showthread.php?t=803682
5. Default camera doesn't work after unlocking!
Ans:
1. Reflash baseband 15 again.
2. Reflash stock 2.1 using flashtool.
3. Test camera, it will have the message "Indexing Media File" on the screen.
4. Wait until it disappear from the screen.
5. Reboot
6. Test camera and it will work fine.
6. I get a lot of "daemon not started successfully" and "failed to start daemon" messages!
Ans: Disconnect phone, exit the command window, reconnect phone, and try unlocking your phone's bootloader again. Repeat until there is no more of such messages and bootloader is successfully unlocked. Also, make sure you have installed Sony Ericsson PC Companion in step 1 and that it recognises your phone.
If you have a problem that is not listed above please post it in this thread
________________________________________________________________________
All credits go to the bootloader devs (Blagus, the_laser, maxrfon etc).
And to B.Jay for the bootloader hard brick warning
Tnx for tut but im still waiting for "one big button" tool
SpyderX said:
Basically this is just a mini tutorial for those wanting to unlock their bootloaders.
Requirements: Rooted X8, X8 drivers, Courage
Recommended: Use stock rom
Note: Unlocking the bootloader of your phone will restore the sim lock of your phone! (if any)
1. Download the files needed for the unlock at the bootloader unlocked thread.
Link: http://forum.xda-developers.com/showpost.php?p=17338716&postcount=300
2. Unzip the files into an appropiate location on your PC.
3. Connect your phone to your computer.
4. Enable USB debugging on your phone.
5. This step will vary depending on whether you have sim unlocked your phone. If yes, jump to step 5a.
If no, run xxxxsemc.exe in the directory you unzipped the unlocking files to and press any key to start the unlocking process. At the same time, open the example log included in the files. Wait 5 minutes. Then, compare the text in the command window to those in the example log. They should be similar. Also, the last message on the command window should be Press any key to continue.
5a. If you sim unlocked your phone using anything other than SEtool, you can't unlock your bootloader for now . If you sim unlocked your phone with SEtool, then run xxxxsetool2.exe in the directory you unzipped the unlocking files to and continue reading from where you left off at step 5.
6. Disconnect your phone from the PC. Congratulations, your X8 is now bootloader unlocked!
All credits go to the bootloader devs (Blagus, the-laser, maxrfon etc)
Click to expand...
Click to collapse
xxxsemc.exe = msm727_semc.exe?
tony-noob said:
xxxsemc.exe = msm727_semc.exe?
Click to expand...
Click to collapse
i forgot the name and i'm now on mobile. Thanks for reminder.
Godra said:
Tnx for tut but im still waiting for "one big button" tool
Click to expand...
Click to collapse
It's not that difficult! ant btw if you have sim-free phone it's only one button.!
thank you everything is working fine I follow the steps in the guide and all is ok
AntwnhsAnt said:
It's not that difficult! ant btw if you have sim-free phone it's only one button.!
Click to expand...
Click to collapse
Probably it is but currently there isnt any benefit of cracking bl until custom kernel. Right?
Godra said:
Probably it is but currently there isnt any benefit of cracking bl until custom kernel. Right?
Click to expand...
Click to collapse
Right! Can't wait!
Godra said:
Probably it is but currently there isnt any benefit of cracking bl until custom kernel. Right?
Click to expand...
Click to collapse
Yeah, really, it's better to wait to see, because probably when we have a custom kernel there is a easier way to crack the BL (i think, but yeah, this way is very simple already xD)
But lets wait to have more feedbacks and have some custom kernels with some modules built-in and some cool things
I hope we have a Custom Kernel that supports Symbian, because it's very good to daily use and now it's also Open Source!
Please remind people that if the bootloader gets f**ed up somehow in the process, the phone gets bricked, truly bricked, with no way to unbrick unless it's sent to SE or if you can connect it to the computer tru jtag/service header.
Nikkopt said:
Please remind people that if the bootloader gets f**ed up somehow in the process, the phone gets bricked, truly bricked, with no way to unbrick unless it's sent to SE or if you can connect it to the computer tru jtag/service header.
Click to expand...
Click to collapse
Done. Time to catch some sleep zzzzz.....
__________________________
Be careful when trying this out, people.
Wait: are you guys telling me that bootloader as been bypassed (or unlocked) ??!
Sent from my X8 using XDA App
LuisDias said:
Wait: are you guys telling me that bootloader as been bypassed (or unlocked) ??!
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Yes. Read the bootloader thread. It has been unlocked.
how i can sure when my bootloader is unlocked?
tony-noob said:
how i can sure when my bootloader is unlocked?
Click to expand...
Click to collapse
oops, accidentally pressed thanks button. As of now, there is no way to know.
SpyderX said:
oops, accidentally pressed thanks button. As of now, there is no way to know.
Click to expand...
Click to collapse
and the last thing... 2.1 is important for unlocking? and you on 2.1 when unlock the bootloader?
tony-noob said:
and the last thing... 2.1 is important for unlocking? and you on 2.1 when unlock the bootloader?
Click to expand...
Click to collapse
Not sure if it is important. I was on GingerDX.
it is important i think, i read something in the DEV's topic that says that we have to be in eclair or what else, i don't know, but it is easy to get back to 2.1, just open up the SE PC Companion and do REPAIR, then open SuperOneClick to ROOT, use that APK that installs XRecov and you're done
It will take 15mins to REPAIR + 5/10 to Root and intall XRecov. It's fast and easy
done, pretty easy. one click, one key press. simple
simple tutorial, thanks
Sent from my X8 using xda premium
Sory because I don't know where I got this tutorial exactly
but I have to give credit whoever make this tutorial..
THANKS to pollob666 for your great and easy guide..
Here we go,
Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!
B)Still intressted??
C)U MUST ON STOCK ROM (ORIGINAL ROM FROM SE)
D) Check Manufactoring date/code (behind batery)
11W29 above U better stay away and stop dreamming (i got 4 times hard bricked on 11W38)
11W28 below U can proceed and again I am not Responsible if it BRICK YOUR PHONE!!!!
Step 1: (Downloads)
A) READ THIS OR U will cry if you skip to read this
B) Download S1tool [UPDATED 13 FEB 2012]
C) Download Unlocker [UPDATED 13 FEB 2012]
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
========================================================================================================
And here to relocking bootloader with easiest step
Shared and prepaired by Black Xperia X8
This is tutorial how to relock bootloader!
1.Step: i-Download S1Tool and ii-Download Flashtool
2.Step:Install FlashTool and Gordon Gate Driver
3.Step: Extract rar with 7zip,Winrar...
4.Step: Disable antivirus and firewall because it can interrupt process
5.Step: Open folder where you extract it
6.Step: Run S1Tool.exe
7.Step: Enable USB Debug and plug USB in PC and Phone
8.Step: Klick restore button
9.Step: Unplug your phone and turn it off
10.Step: Hold back key and plug USB in phone
11.Step: Unplug device and klick identify
12.Step: Hold back key and plug usb last number need to be 28
not 29 if is 28 then you relocked your bootloader or a litle r
thank you mate it work..
nelikp said:
Here we go,
Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!
B)Still intressted??
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/show...0&postcount=26
C) Download Unlocker : From http://forum.xda-developers.com/show...77&postcount=3
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
Click to expand...
Click to collapse
You Are LATE!!! Someone has posted it before you... And the words, sentences is totally familliar.
_____________________________________
XDA app (free) | Xgin v6.1 alfs kernel v6 B-) | Anti-Brick phone :-D | Timescape by mr Froggy Furnetal | 火影四大目
___________________________________
mpoendi said:
You Are LATE!!! Someone has posted it before you... And the words, sentences is totally familliar.
Click to expand...
Click to collapse
look like some jealous
is ok...just wanna helping each other in case newbies can't find the previous post...
please open minded...
we here to helping each other...
if you feel unconfortable with me dont read this post again...
nelikp said:
Here we go,
Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!
B)Still intressted??
Step 1: (Downloads)
A) Download Flash Tool : From http://forum.xda-developers.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://forum.xda-developers.com/attachment.php?attachmentid=713763 [UPDATED]
C) Download Unlocker : From http://forum.xda-developers.com/attachment.php?attachmentid=715058&d=1315609618 [UPDATED]
Step 2: (Prepare)
A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.
Step 4: (Verify)
A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help[/QUOTE
maybe you forgot to post the purpose of flashtools...
Click to expand...
Click to collapse
yeah...I should delete the flash tool link..
because isn't not use for unlocking..
Deleted
thanks..
Everything is nice but remove that s1tool because it doesnt have restore button this have http://www.mediafire.com/?jeo3c1xt988f822 if somone want to relock bootloader .It would be nice to add relock tutorial
Black Xperia X8 said:
Everything is nice but remove that s1tool because it doesnt have restore button this have http://www.mediafire.com/?jeo3c1xt988f822 if somone want to relock bootloader .It would be nice to add relock tutorial
Click to expand...
Click to collapse
I never relock it...if u managed relocking bootloader and want to shared it here, I'll post it on 1st post..and credit for u...
Unlock bootloader
trying to unlock bootloader with ginger dx v21 kernel 2.6.29 but "exec' system/bin/sh' failed:not such file or directory found" same with flashtool 0.6.6. what can I do????
Do I must install stock Kernel???
Thanks
supermiki said:
trying to unlock bootloader with ginger dx v21 kernel 2.6.29 but "exec' system/bin/sh' failed:not such file or directory found" same with flashtool 0.6.6. what can I do????
Do I must install stock Kernel???
Thanks
Click to expand...
Click to collapse
not sure what u r talking about...
if u on custom kernel that mean your bootloader unlocked..
I tot u r talking about custom rom, am I rite?
so flash stock rom 1st...
(use SEUS, PCC, or FLASH TOOL)
any program I use Flashtool or msm777 I get the same error message :" system/bin/sh' failed:not such file or directory found" I have a cooked rom GINGER DX V21 an Kernel 2.6.29; if I check with s1toll I always have the High "R" value
Thanks
I will but later dont have time now.
@supermikki
look carefull man...
D) Look For Line "XXXX SIMLOCK CERTIFICATE"
Step 3: (Unlock)
A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
good luck!
unlock bootloader
Tanks for reply.
I got SEMC but when I run "msm7227_semc.cmd stil I get the message:
system/bin/sh' failed:not such file or directory found
ok...I got ya...
flash stock rom....use SEUS, PCC< or flash tool..
go back to stock rom 2.1 update 1 first..
it should be okeh
I read in another forum, who knew open bootloader with 11w35 without problem. So can i open bootloader with 11w34? Is it safe?
Tanks for reply Nelikp.
Just one more question when you say rom 2.1 you mean original rom or any rom 2.1
tanks
Is-tee said:
I read in another forum, who knew open bootloader with 11w35 without problem. So can i open bootloader with 11w34? Is it safe?
Click to expand...
Click to collapse
u can try..because mine is 11w38 and I did it then after a few days, I got no network problem..
but u can try and see at the line if XXXis this sorry u can't unlock
but if u still wanna try it...
do it on your risk...
I still want to try it..but after my warranty left for 1 month..
because already sent 5times
I got 3times soft brick 1time no network problem
2 times hardbricked
so what u think?
supermiki said:
Tanks for reply Nelikp.
Just one more question when you say rom 2.1 you mean original rom or any rom 2.1
tanks
Click to expand...
Click to collapse
original (stock rom)
nelikp said:
u can try..because mine is 11w38 and I did it then after a few days, I got no network problem..
but u can try and see at the line if XXXis this sorry u can't unlock
but if u still wanna try it...
do it on your risk...
I still want to try it..but after my warranty left for 1 month..
because already sent 5times
I got 3times soft brick 1time no network problem
2 times hardbricked
so what u think?
Click to expand...
Click to collapse
Thank you! I can unlock, s1tool wrote SEMC SIMLOCK CERTIFICATE, but i don't wanna brick my phone, if it's not safety!
HOW TO UNLOCK BOOTLOADER NEWBIES LOOK HERE
Alright if you are reading this thread I assume you are a noob(no offense) so I'm going to simplify(as in speak in simple english, not programming jargon) the process which is found here: http://forum.xda-developers.com/showthread.php?t=1254225
BEFORE YOU EVEN TRY ANYTHING, TAKE OUT YOUR BATTERY COVER, TAKE OUT YOUR BATTERY, AND CHECK YOUR MANUFACTORING DATE. IF IT IS 11W29 OR ABOVE, DO NOT TRY THIS AS IT WILL HARD BRICK YOUR PHONE.
So first you have to download some files.
.Unlock Software-Credits goes to the_laser(msm7227)
.s1tool-Credits goes to the_laser(s1tool.7z)
.PCCompanion
.Flashtool 0.6.8.0
.Gordon's Gate
1. Now the first step is to install Gordon's Gate. It works for X8, X10 and X10 mini pro. It should work with W8 too but I won't guarantee. Once you have done that, restart your computer.
2. Then, open task manager(even noobs should know how), click on processes and kill any ADB.exe process you find in there and DO NOT load Flashtool for the rest of the installation process. If you do not have PC Companion, download the given attachment and install it. Once that is done, connect your phone to your PC and ensure that it can recognize your phone.
3. Now, unzip the s1tool.7z and msm7227.7z and extract thefiles to a folder on your desktop, naming the folder anything you want. I named it X8 Bootloader Unlock so that it is easy to recognise.
4. Disable your antivirus as it might recognise ADB.exe as virus.There is NO virus in ADB.exe and the antivirus will interfere with the unlocking process
5a. Turn off your phone.
b. Open the folder you unzipped S1tool to and run S1tool.exe. Then, click on IDENTIFY/DO JOB button before proceeding to step 5c.
c. Boot your phone into flash mode(insert USB cable while holding down the back button; make sure you installed Gordon's Gate found in step 1). Continue holding back button until you get some output in S1tool. The LED on your phone should flash green if it is in flash mode.
It should look something like this:
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45:49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE
9/9/2011 21:45:49 Elapsed:36 secs.
IF THE HIGHLIGHTED R IS SMALL LETTER(r), YOUR BOOTLOADER IS ALREADY UNLOCKED. If not, continue.
If the simlock certificate(Bolded, underlined and coloured red) specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT RECOGNIZED SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked your phone using Omnius, jump to step 6a.
If the simlock certificate specified is NOT RECOGNIZED SIMLOCK CERTIFICATE, you can't unlock the bootloader of your phone. If you try, radio capability of your phone will be disabled (this has been reported to be untrue by a number of people who claim to have unlocked bootloader successfully with msm7227_semc.cmd). I recommend you do not try as you are a noob.
Do note that the SIMLOCK certificate doesn't mean that you have/don't have a sim lock on your phone.
6a. Disconnect your phone and reboot, then reconnect again.
b. Enable USB Debugging on your phone(Settings>Applications>Development>USB Debugging)
Note: Don't run Flashtool and terminate any ADB.exe process you find in task manager before performing step 6c.
c. Since you are a newbie, I will only be posting how to unlock phones with SEMC SIMLOCK CERTIFICATE. For the others, please try the forum link above, but bewarned, you should be experienced before you try those.
7a. Run msm7227_semc.cmd in the folder you unzipped the unlocking files to and press any key to start the unlocking process.
7b. Open the example log included in the folder. Wait 5 minutes. Then, compare the text in msm7227_semc.cmd to those in the example log. They should be similar. Also, the last message on the window should be Press any key to continue.
Example log:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
1743 KB/s (585731 bytes in 0.328s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
192 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
Second, we need to write semcboot
1130 KB/s (596916 bytes in 0.515s)
successfully wrote 0003ff00
Press any key to continue . . .
Note: It is recommended to turn off your antivirus before starting this as antivirus might interfere with the unlocking of bootloader on your phone (some antivirus software claim that there is virus in ADB.exe even though there isn't one)
Note: If your log is very different from this please check if your bootloader is unlocked using step 5c. If it is not unlocked, turn off your antivirus and repeat step 7a again. If you get some "error: protocol fault" messages, that is completely fine, this is because the "problem" is that your phone was still rebooting and USB debugging mode is not turned on when rebooting so it couldn't acquire the status and had an error. If you get many "Access is denied" messages, turn off your antivirus and try again. Some users reported that the "Access is denied" messages were eradicated and they successfully unlocked their bootloaders after turning off their antivirus. If you get: could not find specified folder(like me when I tried the first time) use another computer(preferably laptop).
Alternatively, you could unlock your bootloader with Flashtool, although it didn't work for me.
Start Flashtool, connect your phone and then wait for your phone to be recognized.
Then, go to: Plugins/(insert device name here) Unlock/run
A screen will pop up and ask you to connect your phone in Flash mode
1. Unplug the USB cable from your phone.
2. Turn off your phone.
3. Press and hold the "Back" button on your phone.
4. Plug in the USB cable to your phone.
5. Release the "Back" button after the screen that popped up disappears.
The unlocking process will start.
Wait until Flashtool asks you to disconnect the cable off the phone, then turn on the device and connect the usb cable once again.
Wait for Flashtool to push the required files to your phone.
After a while, Flashtool will have the message "Successfully applied unlock" and the phone will reboot.
8. Disconnect your phone from the PC. Congratulations, your phone has an unlocked bootloader now!
__________________________________________________________________
How to check if your phone has an unlocked bootloader
Open s1tool.exe found in the folder you extracted s1tool to and then click IDENTIFY/DO JOB button.
Boot your phone into flash mode (Press and hold back button while connecting it to your PC using an usb cable. The LED on your phone should flash green). Continue holding back button until you get some output in s1tool.
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45:49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE
9/9/2011 21:45:49 Elapsed:36 secs.
If the line RUNNING S1_EROM FROM VER "#8A029" has a lowercase "r" letter replacing the "#" (RUNNING S1_EROM FROM VER "r8A029"), your bootloader has been unlocked . If it has an uppercase "R" replacing the "#" (RUNNING S1_EROM FROM VER "R8A029"), your bootloader is NOT unlocked .
Now time to start Flashing Kernels
If I helped you, please click the thanks button! And I'll be sure to hit the thanks button for you if you helped me!
thank you for the helpful post but there are threads about this already
Just in case there are some people(like the guy we met yesterday, totally a pain to explain things to him) who do not understand this thread http://forum.xda-developers.com/showthread.php?t=1254225
Run msm7227_semc.cmd in the folder you unzipped the unlocking files to and press any key to start the unlocking process.
this apps bricked my friends sony ericsson W8, no power, no green light, no response, is there any way to unbrick it? thanks
Yes, first start up PC Companion. Click on software support and and then Phone Software update. Click on repair and choose your phone model. Then once it has finish preparing the files it will tell you to off your phone that kind of stuff. Now take out your battery and put it back, and immediately after that press and hold back button and insert usb cable. The LED should flash green. If it does not, try again. If you are sure you did it correctly, try to boot up your phone. If it does not vibrate, then you might have just got an expensive brick. Sorry about that. It worked for many people.
Click thanks if I helped!
Look at the first few lines of my post. BEFORE YOU EVEN TRY ANYTHING, TAKE OUT YOUR BATTERY COVER, TAKE OUT YOUR BATTERY, AND CHECK YOUR MANUFACTORING DATE. IF IT IS 11W29 OR ABOVE, DO NOT TRY THIS AS IT WILL HARD BRICK YOUR PHONE.
Check it by taking out your battery and look for a number that looks like this, for example-10W40 or 11W28? If it is 11W29 and above, it's not my fault... You have to go to Sony Mobile to get it fixed
Thanks mate, my friends phone is already fixed from cellphone shop, good thing the IMEI didn't affected, but it cost a little
i realy need that !
thnak you
This works also for the phones locked by code ?
This sucks..i have 11w40 so i can't unlock my bootloader, whatever i got that SEMC SIMLOCK CERTIFICATE...I havent tried yet cuz i'm afraid it will brick my lovely phone
Sent from my E15i using XDA
XperienceX8 said:
HOW TO UNLOCK BOOTLOADER NEWBIES LOOK HERE[/SIZE][/COLOR]
Click to expand...
Click to collapse
Hm, XperienceX8, are you sure, that this is really necessary for persons without clear understanding what they are doing,to unlock their bootloader? Because the main reason for unlocking is to flash custom kernel, and later on custom ROM. Do you have similar walkthrough for all this operations? and, of course, are you ready to answer for newbies bricks?
there are a lot of easier ways to either get a brick (e.g. pull it into a bath ) or customize your phone (download themes pack ).
my date is 11w04,setool1 said semc simlock,and i am still afraid of phone brick.last time i bricked the 11w38 and the repair shop didnt mount the graphics card-any 3d app has screen shutter,and that problem isnt fixed.if i brick it again,i can ask them to fix the graphics card too.so is it worth it?? 11W04,SEMC SIMLOCK CERTIFICATE
shadik555 said:
my date is 11w04,setool1 said semc simlock,and i am still afraid of phone brick.last time i bricked the 11w38 and the repair shop didnt mount the graphics card-any 3d app has screen shutter,and that problem isnt fixed.if i brick it again,i can ask them to fix the graphics card too.so is it worth it?? 11W04,SEMC SIMLOCK CERTIFICATE
Click to expand...
Click to collapse
What in gods name are you banging on about?
Sent from my E15i using XDA
Lloir said:
What in gods name are you banging on about?
Sent from my E15i using XDA
Click to expand...
Click to collapse
i am blabbing about: CAN MY PHONE ****ING BRICK IF S1TOOL SAYS "SEMC SIMLOCK CERTIFICATE",AND I TRY BOOTLOADER UNLOCK WITH msm7227?? -.-
well if you read the PROPER THREAD for unlocking bootloader, you will find out! LEARN TO READ AND USE THE SEARCH BAR!!
Success
it worked,now to flash ics na kernel
i knew it would work as it wasn't 11w29+ but you need to find stuff out for yourself
If you're lucky you can unlock 11W29+
too many same threads. talk about same thing.(copy paste/ summary etc)
wan + thanks be more creative
Ok...question: my x8 is before the 11/30 date. But when I get to the point to reconnect in flash mode it cancels on me. A blue.line of text says cancelled, and it asks have I it in mtb mode or something? I looked but that function in only in older models. I have yet to connect in flashmode for flash tool. Any suggestions? Maybe your 1st solution is a viable alternative for me? Can't figure it..
Sent from my Wildfire S using xda premium
Seems a lot of you are having the same problems I had with using Sony PC Companion to restore your phone.
Here is the proper method.
Follow these instructions STEP BY STEP, and you will eventually restore your X8 to its original state:
- Turn off the phone, and unplug it from the PC !
- On your PC, uninstall Sony PC Companion
- Restart your PC
- On your PC, clean any Cache and Registry related to Sony PC Companion, then restart PC again.
- Reinstall Sony PC Companion by downloading it from here
- Turn on Sony PC Companion on your PC
- In Sony PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
If Sony PC Companion STILL doesn't recognize your X8, then, uninstall Sony PC Companion AGAIN, and start the above described process AGAIN. It WILL eventually work!
You may also try to do it with FLASH TOOL
Good guide, but it only works for SOFT brick. Hard brick means you cant even turn on your phone or boot it in flash mode. No signs of life.
Sorry to confirm, WhatInTheButt...
A hard brick means your device is dead ... like it happens with boot loader unlocks in 11W29+ devices.
The resolve you talk about is a soft brick where the phone still shows sign of life.
Changes the thread title, it's misleading and wrong.
B.Jay said:
Sorry to confirm, WhatInTheButt...
A hard brick means your device is dead ... like it happens with boot loader unlocks in 11W29+ devices.
The resolve you talk about is a soft brick where the phone still shows sign of life.
Changes the thread title, it's misleading and wrong.
Click to expand...
Click to collapse
+1.
The OP's solution applies to SOFT brick.
A hard brick is when you burn it, hear a crack inside or a sqeeeking sound that will precede sudden death of your device, with no means (without physical replacement of parts) of revival of your lovely x8.
Hard Brick
Hard brick can only be fixed by Sony Ericsson or by a person who has excellent knowledge of electronics.
Misleading title?
This is how you fix a SOFT bricked phone.
elderduke said:
+1.
The OP's solution applies to SOFT brick.
A hard brick is when you burn it, hear a crack inside or a sqeeeking sound that will precede sudden death of your device, with no means (without physical replacement of parts) of revival of your lovely x8.
Click to expand...
Click to collapse
I thought a softBrick was an eternal loop, or inability to enter cwm. I once had a whatchyamacallit-brick where nothing happened, X8 wouldn't turn on or budge at all. Used this method and worked just fine. Well, then. If that was a SOFT brick, I feel sorry for those with a HARD brick
Hi,
Once i had bricked my phone and reset that back using SEUS, however now i am unable to do it with that.. i also tried your way using PCC, it says no new software available for you now try later??? any other way??
ghost9685 said:
Hi,
Once i had bricked my phone and reset that back using SEUS, however now i am unable to do it with that.. i also tried your way using PCC, it says no new software available for you now try later??? any other way??
Click to expand...
Click to collapse
If you UNISTALLED Sony PC Companion, then reinstalled it again, and it still doesn't work, then try to do it with Flash Tool.
It's not an X8 issue that PC Companion doesn't recognize it. It's something that Sony have changed. That's why it's necessary to uninstall the current version of Sony PC Companion, restart your PC, clear any cache and registry related to it, then install Sony PC Companion 2.1 again.
yes i did that. as a matter of fact, i formated my entire system and installed the OS again and downloaded and installed new version of PCC and tried this but still says no new software available.
And for flashing via Flash tool.. how do i do it.. where to get the stock W8 .ftf (ROM) file?? pls help guys..
I agree with OP. I did exactly the same when I had soft bricked my phone n it worked.
Sent from my X8 using XDA
Good guide for troubleshooting. I had to do this once and this should've helped me. It was stressing.
Sent from my Xperia X8 using Tapatalk
the pc recognises the x8(sound plays on pc when i disconnect and connect the x8),but no window pops up.my x8 is stuck at se logo and i cant even access the recovery.i will uninstall se companion,but how do i find the cache?
xperia e15i not power on
When i try to power just vibrate once.
Pc companion , update firmware ok , but stil the problem.
Here device info with S1tool :
20/06/2012 12:46:39 PM Welcome to S1 identify tool
20/06/2012 12:46:49 PM
20/06/2012 12:46:49 PM TO CONNECT NEXT PHONES
20/06/2012 12:46:49 PM X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
20/06/2012 12:46:49 PM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
20/06/2012 12:46:49 PM PRESS AND HOLD "BACK" BUTTON...
20/06/2012 12:46:49 PM
20/06/2012 12:46:49 PM PLEASE ATTACH TURNED OFF PHONE NOW
20/06/2012 12:46:49 PM
20/06/2012 12:46:56 PM
20/06/2012 12:46:56 PM RUNNING S1_EROM VER "R8A029"
20/06/2012 12:46:56 PM SOFTWARE AID: 0001
20/06/2012 12:46:56 PM LOADER AID: 0001
20/06/2012 12:46:57 PM FLASH ID: "0020/00BC"
20/06/2012 12:46:57 PM LOADER VERSION: "R4A045"
20/06/2012 12:46:57 PM
20/06/2012 12:46:57 PM MODEL (from GDFS): E15i
20/06/2012 12:46:57 PM SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
20/06/2012 12:46:57 PM CUSTOM VERSION: 1243-2850_R3B
20/06/2012 12:46:57 PM FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
20/06/2012 12:46:57 PM SERIAL NO: CB511RZE57
20/06/2012 12:46:57 PM
20/06/2012 12:46:57 PM SEMC SIMLOCK CERTIFICATE
20/06/2012 12:46:58 PM Elapsed:8 secs.
cela_relly said:
When i try to power just vibrate once.
Pc companion , update firmware ok , but stil the problem.
Here device info with S1tool :
20/06/2012 12:46:39 PM Welcome to S1 identify tool
20/06/2012 12:46:49 PM
20/06/2012 12:46:49 PM TO CONNECT NEXT PHONES
20/06/2012 12:46:49 PM X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
20/06/2012 12:46:49 PM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
20/06/2012 12:46:49 PM PRESS AND HOLD "BACK" BUTTON...
20/06/2012 12:46:49 PM
20/06/2012 12:46:49 PM PLEASE ATTACH TURNED OFF PHONE NOW
20/06/2012 12:46:49 PM
20/06/2012 12:46:56 PM
20/06/2012 12:46:56 PM RUNNING S1_EROM VER "R8A029"
20/06/2012 12:46:56 PM SOFTWARE AID: 0001
20/06/2012 12:46:56 PM LOADER AID: 0001
20/06/2012 12:46:57 PM FLASH ID: "0020/00BC"
20/06/2012 12:46:57 PM LOADER VERSION: "R4A045"
20/06/2012 12:46:57 PM
20/06/2012 12:46:57 PM MODEL (from GDFS): E15i
20/06/2012 12:46:57 PM SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
20/06/2012 12:46:57 PM CUSTOM VERSION: 1243-2850_R3B
20/06/2012 12:46:57 PM FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
20/06/2012 12:46:57 PM SERIAL NO: CB511RZE57
20/06/2012 12:46:57 PM
20/06/2012 12:46:57 PM SEMC SIMLOCK CERTIFICATE
20/06/2012 12:46:58 PM Elapsed:8 secs.
Click to expand...
Click to collapse
Try to upload the software flashtool.
Help me Plzzzzz
Dear masters,
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX
I have tried the OP guide for Bricked Xperia x8. But my xperia could not response.
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program always request for connecting usb cable and press back button.
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
r_win said:
Dear masters,
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX
I have tried the OP guide for Bricked Xperia x8. But my xperia could not response.
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program always request for connecting usb cable and press back button.
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
Click to expand...
Click to collapse
Don't panic. And make sure you have installed the Flash mode drivers first. When they ask to connect phone in flash mode (back button part), take out your phone's battery, put it back in, then press and hold the back button WHILE plugging the phone into the computer through the USB cable. If you did this correctly a green LED light will appear signifying that you entered flash mode.
Sent from my X8 using Tapatalk 2
long downloading
i am stuck in update-..downoading.. .... i have been waiting for 2 hours...its not my connection..i even finished downloading 4 100mb roms:crying:
just to be clear, your pc recognize your phone in flash mode?
Can you enter to CWM ?
i just pressed back buttom wen i connected x8 to pc..then it started by itself...now its dwnloadind damn slow....my connection is not slow...i cant boot to recovery...stuck in "sony eicson" :crying:
Hi all,
Firstly I want to apologise if this has been asked before. I have hand-on-heart spent the equivalent of 48hrs solid searching for the answer over the last few weeks for this.
I have a rooted X10i running 2.3.3 (Stock). I have tried everything to unlock my bootloader, but it seems to be impossible to unlock.
Is this the case or am I missing a trick or something? Can anyone please help me?
gaznicki said:
Hi all,
Firstly I want to apologise if this has been asked before. I have hand-on-heart spent the equivalent of 48hrs solid searching for the answer over the last few weeks for this.
I have a rooted X10i running 2.3.3 (Stock). I have tried everything to unlock my bootloader, but it seems to be impossible to unlock.
Is this the case or am I missing a trick or something? Can anyone please help me?
Click to expand...
Click to collapse
Well to be honest i think there is not such thing called Permanent Locked Bootloader , well same situation happened to me yesterday when i was trying to flash my 1st ROM for Xperia X10i , but something happened and i forgot to copy the zip file to the SD ......... Anyway , just try to unlock it by Flashtool v0.9.80 , and also download s1tool to check if it's unlocked or not , http://forum.xda-developers.com/showthread.php?t=928343 Here , i followed those instructions
Unfortunately this guide and several others are the ones I have been following.
I have just tried to unlock the bootloader using flashtool64 0.9.9.0 and have gotten the following error:
Code:
15/034/2012 14:34:51 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
15/034/2012 14:34:51 - INFO - Start Reading property
15/034/2012 14:34:51 - INFO - Reading TA finished.
15/034/2012 14:34:51 - INFO - Ending flash session
15/034/2012 14:34:51 - WARN - Cannot identify your SL. Aborting
15/034/2012 14:34:51 - INFO - You can now unplug and turn on device, then plug it again
SETOOL gives me the following
Code:
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A013"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1232-9897_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511NH6FR
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:5 secs.
Ok , here what you should do , you have Kernal Downgrade and Upgrade right from the Rooting thing , aZuZu , well 1st Flash Downgrade , after it's done , unplug the device then turn it on then plug the usb , then wait until root press appears , plus use this flashtool http://forum.xda-developers.com/showthread.php?t=1196421&page=1, when the rooting is done , flash the upgrade , then turn on the device , and go back to Flashtool 0.9.9.0 , wait until it recognize your phone , then if you can see the Ask Root Perms appears press it until and press allow in your phone in SuperUser , then wait until Flashtool tool says Root Access Allowed , if it says so install xRecovery 0.3G , then you go to Plugins> you will see bootloader unlock -- i guess , i'm using 0.9.8.0 -- , then press Run , do what Flashtool says , then test it with s1tool if it's r not R , then your bootloader is unlocked , Well Enjoy Flashing After That lol xD , Good Luck , Hope this work
gaznicki said:
Hi all,
Firstly I want to apologise if this has been asked before. I have hand-on-heart spent the equivalent of 48hrs solid searching for the answer over the last few weeks for this.
I have a rooted X10i running 2.3.3 (Stock). I have tried everything to unlock my bootloader, but it seems to be impossible to unlock.
Is this the case or am I missing a trick or something? Can anyone please help me?
Click to expand...
Click to collapse
Download latest flashtool 0.9.8
Very simple method just follow the GFACE guide.. only one click and ur bootloader will be unlocked...
I think ur s1tool says you shouldn't unlock your bootloader..
Sent from my X10 using xda premium
gaznicki said:
Unfortunately this guide and several others are the ones I have been following.
I have just tried to unlock the bootloader using flashtool64 0.9.9.0 and have gotten the following error:
Code:
15/034/2012 14:34:51 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
15/034/2012 14:34:51 - INFO - Start Reading property
15/034/2012 14:34:51 - INFO - Reading TA finished.
15/034/2012 14:34:51 - INFO - Ending flash session
15/034/2012 14:34:51 - WARN - Cannot identify your SL. Aborting
15/034/2012 14:34:51 - INFO - You can now unplug and turn on device, then plug it again
SETOOL gives me the following
Code:
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A013"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1232-9897_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511NH6FR
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:5 secs.
Click to expand...
Click to collapse
Don't try to unlock your bootloader
You will lose your network( there will be no signal in the rom. even on stock roms).
gaznicki said:
Hi all,
Firstly I want to apologise if this has been asked before. I have hand-on-heart spent the equivalent of 48hrs solid searching for the answer over the last few weeks for this.
I have a rooted X10i running 2.3.3 (Stock). I have tried everything to unlock my bootloader, but it seems to be impossible to unlock.
Is this the case or am I missing a trick or something? Can anyone please help me?
Click to expand...
Click to collapse
Follow my tutorial and you will be fine.
http://forum.xda-developers.com/showthread.php?t=1821750
Sent from my X10i using xda app-developers app
I am a little confused now.
Can I unlock my bootloader or will it kill the network connection.
I have tried your method brenty, but it doesn't work for me
gaznicki said:
I am a little confused now.
Can I unlock my bootloader or will it kill the network connection.
I have tried your method brenty, but it doesn't work for me
Click to expand...
Click to collapse
Don't try to unlock
Your network will surely be gone
You have another way to unlock bootloader
First you have to sim unlock your phone using setool (search google for it)
Then check with s1tool, it will show setool sim certificate
. Then you can unlock bootloader safely
don't do it, i tried that after sim unlock with omnius and then i got NO network.
I had the backup of the trim area... that was my luck. For what i can see the bootlader unlock is now impossible for me, or i have to pay again to sim unlock with seetool.
@THeLogiC if he uses setool2 to sim unlock his phone there is no need to use the s1tool, as the setool2 unlocks the boot loader while it sim unlocks the phone, as thats how i got mine done when the_laser first did the bootloader unlock.
Sent from my Xperia X10 using xda app-developers app
Futura2000 said:
@THeLogiC if he uses setool2 to sim unlock his phone there is no need to use the s1tool, as the setool2 unlocks the boot loader while it sim unlocks the phone, as thats how i got mine done when the_laser first did the bootloader unlock.
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
thanks for correcting
i had this issue to.. flashtool wouldnt let me accept root perms or unlock boot.. in flashtool foolder try finding flashtoool64 and use that.. it worked for me