Related
I CAN NOT get my fascinate to show up in ADB on my machine running Ubuntu 10.10. It shows up with the lsusb command, my android rules udev file has it listed, but it wont show up! My wifes D1 shows up just fine! Any ideas?
BTW, I also went through and followed Gridlocks how-to (awesome write-up, btw), but to no avail. Still no adb for me. :-(
Here are my udev rules, for good measure:
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666"
SUBSYSTEM==”usb”, ATTRS{idVendor}==”18d1″, SYMLINK+=”android_adb”, MODE=”0666″
SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666", GROUP="plugdev"
Got it. Permission woes I didn't even think about.
<------Stupid
Alternatively, you could do it like this, if you consistently access the device as one user and don't need systemwide permissions.
Code:
SUBSYSTEM=="usb",SYSFS{idVendor}=="04e8",OWNER="username",GROUP="usergroup"
I'm on unbuntu 11.10, my kindle has CM7 on it, when it's plugged in and I run ./adb devices it shows up as a bunch of question marks and says no permissions. My phone connects fine in adb, so its not a problem with adb. The kindle also connects fine for USB storage and stuff.
i used to have the problem when I was running ubuntu, but even since I started running arch I haven't had that problem. It has something to do with user privelidges and the way I fixed it was by running
Code:
sudo ./adb kill-server
sudo ./adb start-server
./adb devices
stating the adb server using root fixed the problem for me.
btw this isn't the right forum for questions.
Theres no questions forum for the kindle yet. I tried killing and re-starting adb with the sudo command, and it still shows question marks and no permissions
when in run lsusb i get 4 linux foundation root hubs for device1 and for device2 i get
ID 1949:0006 Lab126
Try sudo su or sudo ./adb devices
Sent from my Incredible 2 using XDA App
tried sudo ./adb devices and still question marks and no permissions.
Here's what I know, which isn't much. Maybe some of it will help?
Set up your /etc/udev/rules.d/51-android.rules file like this:
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0006", MODE="0600", OWNER="<username>"
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0005", MODE="0600", OWNER="<username>"
Replace <username> with your user name.
The kindle reports idProduct 0005 when in recovery (at least mine did).
It's worth a shot.
teookie said:
Here's what I know, which isn't much. Maybe some of it will help?
Set up your /etc/udev/rules.d/51-android.rules file like this:
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0006", MODE="0600", OWNER="<username>"
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0005", MODE="0600", OWNER="<username>"
Replace <username> with your user name.
The kindle reports idProduct 0005 when in recovery (at least mine did).
It's worth a shot.
Click to expand...
Click to collapse
Yea, this should fix your problem.
Open terminal and do this...
Code:
gksudo gedit /etc/udev/rules.d/51-android.rules
which will open up 51-android.rules in gedit so that you can add this rule...
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
Save the document and then close and reopen terminal.
Type...
Code:
adb devices
If you do not see your device try rebooting your computer
I do not have the rule set up the way it is quoted from the above post but you can add that in addition to the rule that I posted here.
This is the way my rules look for all of my devices. Notice that for some devices I have "subsystem" and subsystems" rules set up but there does not seem to be a difference in gaining access for ADB. I think I set up "subsystems" on a few devices a while ago for porting clockwork to a few devices or some other random thing. Either way you should just need the "subsystem" rule that I posted in the code box above.
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="12d1", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="0955", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="3610", MODE="0666", OWNER="brian"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="d00d", MODE="0666", OWNER="brian"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0955", ATTRS{idProduct}=="7820", MODE="0666", OWNER="brian"
Click to expand...
Click to collapse
Good luck!!
(This thread should be moved to General. Mods?)
I was having this issue yesterday as well... Fixed be making sure I edited usb.ini in ./android folder with 0x1949 and 0x0006 then i restarted computer.{ just to feel good about myself} rebooted. typed sudo su put my password in typed ./adb kill-server typed ./adb start-server typed ./adb devices and POW im running just fine. Ubuntu 11.10 here
my linux can't list the deivce
my dmesg is:
[ 1283.317124] usb 2-2: new high speed USB device using ehci_hcd and address 13
[ 1283.434819] usb 2-2: New USB device found, idVendor=1949, idProduct=0006
[ 1283.434828] usb 2-2: New USB device strings: Mfr=5, Product=1, SerialNumber=2
[ 1283.434835] usb 2-2: Product: kindle
[ 1283.434840] usb 2-2: Manufacturer: Amazon
[ 1283.434846] usb 2-2: SerialNumber: 0123456789ABCDEF
----
when I use adb-linux devices, it said nothing. : (includibg run with sudo)
>./adb-linux devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
how can I checked and connect it. my kindle can't boot up, it's always in opening-screen "Kindle fire".
ixc said:
my linux can't list the deivce
my dmesg is:
[ 1283.317124] usb 2-2: new high speed USB device using ehci_hcd and address 13
[ 1283.434819] usb 2-2: New USB device found, idVendor=1949, idProduct=0006
[ 1283.434828] usb 2-2: New USB device strings: Mfr=5, Product=1, SerialNumber=2
[ 1283.434835] usb 2-2: Product: kindle
[ 1283.434840] usb 2-2: Manufacturer: Amazon
[ 1283.434846] usb 2-2: SerialNumber: 0123456789ABCDEF
----
when I use adb-linux devices, it said nothing. : (includibg run with sudo)
>./adb-linux devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
how can I checked and connect it. my kindle can't boot up, it's always in opening-screen "Kindle fire".
Click to expand...
Click to collapse
Did you do what post #9 said?
printf "0x1949\n0x0006\n" >>~/.android/adb_usb.ini
adb kill-server
adb devices
I'm on Ubuntu 11.10. I spent a few hours trying different things, but adding SikYou's rule to 51-android.rules:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
Click to expand...
Click to collapse
...finally solved the issue for me. "adb devices" now shows my Kindle Fire.
I have an Ubuntu 11.10 x64 box and I got ADB up and running after adding
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0006", MODE="0600", OWNER="user"
SUBSYSTEM=="usb", ATTR{idVendor}=="1949", ATTR{idProduct}=="0005", MODE="0600", OWNER="user"
to /etc/udev/rules.d/51-android.rules and adding 0X1949 to adb_usb.ini file.
Everything is working fine but fast boot is unresponsive. any ideas?
Did you chmod +x fastboot and added it to your path? I just put mine in platform-tools where adb is
i used sudo chmod 777 on fast boot. I tried running it from platform tools and the tools directory as a normal user and as root.
So "fastboot --help" does nothing?
sorry i should have specified fast boot works fine with my phone but with the kindle it just says waiting for device with ./fastboot reboot and wont list its attached with ./fastboot devices
Okay I got it working by repeatedly entering ./fastboot devices from power on maybe it times out or whatever but it shows up then i can enter fast boot commands as normal. but if i don't hit fast boot devices it wont work at all not ideal but it works.
I am having the same problem as OP. I am running Ubuntu 11.10 x64 and I have always had ADB working just fine with my fire. I am now in fastboot mode using the "factory" cable but my computer does not recognize the device at all. I can not get any fastboot command to work and lsusb does not show any device connected. Any help?
I have these two lines in my udev rules
SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
And everything works fine
foxdog66 said:
I have these two lines in my udev rules
SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="1949", MODE="0666"
And everything works fine
Click to expand...
Click to collapse
Yep, I have my rules set up just like that
Sent from my ADR6400L
in your /home make a folder called .android then make a file called adb_usb.ini
then add this to the file
%SingleBootLoaderInterface% = USB_Install, USB\VID_1949&PID_0FFF
0X1949
0X0006
finally reboot
then hopefully it will work
OK so I have an old laptop running Ubuntu 10.04lts (because it runs best on that laptop) and no other computer. I was trying to root with the guide on the nexus4root website but when I go to unlock the boot loader it doesn't do anything. And I tried running the toolkit from the sticky with wine but no avail there either. Anyone have advice on how to do this, or do I need to bite the bullet and use a friends PC?
(I got the nexus 4 from T-Mobile, and I'm still very new to Linux. I went to college for computer engineering but lost interest in messing with computers)
Sent from my Nexus 4 using xda premium
This might help (not watched it but Google bought it up)...
http://www.youtube.com/watch?v=VfmulWBobTQ
skaroger867 said:
OK so I have an old laptop running Ubuntu 10.04lts (because it runs best on that laptop) and no other computer. I was trying to root with the guide on the nexus4root website but when I go to unlock the boot loader it doesn't do anything. And I tried running the toolkit from the sticky with wine but no avail there either. Anyone have advice on how to do this, or do I need to bite the bullet and use a friends PC?
(I got the nexus 4 from T-Mobile, and I'm still very new to Linux. I went to college for computer engineering but lost interest in messing with computers)
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Hey, I have a Ubuntu 12.04 LTS machine and successfully unlocked my N4's bootloader and rooted it, but it shouldn't make any difference. Can you post exactly what the following command (which I assumed you entered, without the $ prompt) outputs:
Code:
$ fastboot oem unlock
Setting up your PATH
Also you need to make sure adb and fastboot executables are in your path. I can help you do that:
Open up .bashrc in your home folder with your favorite text editor (mine's gedit, without the $ prompt):
Code:
$ gedit ~/.bashrc
Add the following lines:
Code:
export PATH = ${PATH}:/home/username/android-sdk-linux/platform-tools/
export PATH = ${PATH}:/home/username/android-sdk-linux/tools/
Note:
You need to put the directory where you installed the Android SDK on your machine correctly. The paths above are just examples in my case and probably won't work for you.
Save and exit gedit. Close every Terminal window you have and open up a new one. Test by typing in (without the $ prompt) with an Android device plugged in and USB Debugging checked:
Code:
$ adb devices
Setting up the udev service
Once you're sure adb and fastboot are in your path, you also need to add the extra udev rules for Fastboot and ADB (in recovery) to work. To do that:
As root, create a file called 51-android.rules and put it in /etc/udev/rules.d/ (again with gedit, without the $ prompt):
Code:
sudo gedit /etc/udev/rules.d/51-android.rules
Copy and paste the following contents into the file:
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0e79", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="413c", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="091e", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="24e3", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2116", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0482", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="17ef", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0409", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2080", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0955", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="2257", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="10a9", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1d4d", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0471", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04da", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="1f53", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="04dd", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="0930", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="19d2", MODE="0666"
Save and close the file. Then, run the following commands (without the $ prompt):
Code:
$ sudo chmod 644 /etc/udev/rules.d/51-android.rules
$ sudo chown root:root /etc/udev/rules.d/51-android.rules
$ sudo service udev restart
$ sudo killall adb
Disconnect and reconnect your device (making sure it's in Fastboot/bootloader mode) and run the following command (without the $ prompt) to test:
Code:
$ fastboot devices
I used the video, it was a lot better than the written version they had up on the site. Phone is rooted and I'm downloading carbon rom now. Thanks!
Sent from my Amazon Kindle Fire using xda premium
Hi all,
I am having problem getting my nexus 7 detected in Ubuntu. I downloaded and installed the android sdk fastboot and adb. I have AOSP custom ROM on my nexus at the moment and i want to flash back to stock kitkat 4.4.4 but my nexus is not detected when i run the command adb devices or fastboot devices. I have tried 5 different USB cables and one of them is the original Asus cable and still the same problem. Can someone help me please?
Regards,
Tarek
Did you update the /etc/udev/rules.d/50-android.rules for your device?
AndDiSa said:
Did you update the /etc/udev/rules.d/50-android.rules for your device?
Click to expand...
Click to collapse
Hi, thanks for the reply. How do i update the /etc/udev/rules.d/50-android.rules? Where do i find it and what do i add to the file?
Regards,
Tarek
Here are my entries regarding the Grouper/Tilapia device:
Code:
...
# adb protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0600", OWNER="ds"
# fastboot protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0600", OWNER="ds"
...
##########################################################################################
# my own devices
...
# Google Nexus 7 16 Gb Bootloader & recovery mode
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0666", OWNER="ds" # Bootloader
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d001", MODE="0666", OWNER="ds" # Recovery
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee7", MODE="0666", OWNER="ds" # Charging only
# Google Nexus 7 16 Gb PTP mode (camera)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e43", MODE="0666", OWNER="ds" # PTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e44", MODE="0666", OWNER="ds" # PTP media with USB debug on
# Google Nexus 7 16 Gb MTP mode (multimedia device)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e41", MODE="0666", OWNER="ds" # MTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0666", OWNER="ds" # MTP media with USB debug on
...
you should update the OWNER to the user of the Linux system who should be allowed to connect / use the device via USB. The most important ones are the first two entries.