Related
The HTC Stocks app has the best widget of all other currency apps, so I was using it on my 1.5 Hero for displaying the EURO/GBP (EURGBP=X) rate.
After the 2.1 rom update I have a strange problem. When I try to add a new ticker for "eurgbp=x", I get the error message: "Unable to recognize the company name or stock symbol you typed. Please try again." However, this worked in the past like a charm. I have to note that adding "gbp=x" or "usd=x" works fine, with no problem at all.
Maybe this problem is related to an updated version of the Stocks app in the new rom. Is anyone experiencing the same problem? I haven't found a similar thread for a Sense Android phone. The same problem exists in the latest rom of HD2, but people have figured a work-around, by changing a file under "Application Data\HTC\", but this file doesn't exist on Android.
Any help would be more than welcome!
I experience the same problem (although I'm on VillainRom12). Previously adding currencies (EURUSD=X etc) was working, but right now I am unable to find it. This could be HTC problem as it was working fine on 1.5, but this could be also some Yahoo search glitch (I am unable to search for that quotes on mobile version of the Yahoo Finance page, while the desktop version works fine). The only workaround to that was to edit manually SQLite database of Stocks application (but this may require root - I can provide details if necessary). Once I added appropriate entries to the list of stocks, it seems to be working fine (it is displaying my currencies, but the search still does not work).
One other deficiency I found was the fact that graphs are not cached anymore - If I open the application and check for example a daily graph, I need to update it in order to see any chart - each time, even if I switch from 1D to 5D and back. It is also automatically updated each time I visit given tab, if I enable the automatic updates. Previously this app displayed previously cached graph. I'm not sure whether this happens also on stock 2.1 ROM.
Now that you mention it, I have the same problem with the graphs in the 2.1, too. It worked (showed the cashed graph) in the 1.5, but not any more. Blank graph until it updates.
Can you provide me some guidance about how to edit the Stocks' database? At least a link to something similar would be much appreciated. Can I access the phone's system folder without rooting it, through my PC (Win, Linux, whatever)?
eeVoskos said:
Can you provide me some guidance about how to edit the Stocks' database? At least a link to something similar would be much appreciated. Can I access the phone's system folder without rooting it, through my PC (Win, Linux, whatever)?
Click to expand...
Click to collapse
I'm new in the business, so I'm not sure if the root is necessary. You can try it, anyway to see if you will be able to push and pull files from the directory where Stocks stores its database.
Here's what I did:
Enable USB Debugging in Settings -> Applications -> Development -> USB Debugging
Download Android SDK from http://developer.android.com/sdk/index.html
In command line go to subdirectory tools of Android SDK
Close Stocks app and remove Stocks widget from the screen
Connect Phone via USB
... (Beginning of the optional part) ...
Go to Android shell
Code:
adb shell
List any processes to see if there's a com.htc.android.Stock process (like in this case)...
Code:
ps | grep Stock
7605 10007 130m S com.htc.android.Stock
7619 0 2156 S grep Stock
Kill any Stock processes (using the value in the first column):
Code:
kill 7605
Exit to command line
Code:
exit
... (End of the optional part) ...
Pull the Stock database:
Code:
adb pull /data/data/com.htc.dcs.service.stock/databases/stock.db stock.db
Sample output:
Code:
d:\Projects\Android\tools>adb pull /data/data/com.htc.dcs.service.stock/databases/stock.db stock.db
568 KB/s (5120 bytes in 0.008s)
Backup, just in case:
Code:
copy stock.db stock_backup.db
Run sqlite3
Code:
sqlite3 stock.db
Enable headers in sqlite:
Code:
.headers on
List contents of quotes table:
Code:
select * from quotes;
Sample output:
Code:
sqlite> select * from quotes;
_id|_name|_symbol|_price|_change|_percent|_open|_high|_low|_volume|_link|_type|_sequence|_updatetime
2|CHF/PLN|CHFPLN=X|3.08299994468689|0.0116999996826053|0.381900012493134|3.07209992408752|3.08550000190735|3.07010006904602|0|http://m.yahoo.com/htcwf/search?p=CHFPLN=X||0.0|1278490511305
3|USD/PLN|USDPLN=X|3.27649998664856|0.0200999993830919|0.617200016975403|3.25550007820129|3.27959990501404|3.24499988555908|0|http://m.yahoo.com/htcwf/search?p=USDPLN=X||100.0|1278490511305
4|EUR/PLN|EURPLN=X|4.1217999458313|0.0151000004261732|0.367700010538101|4.11250019073486|4.12349987030029|4.10799980163574|0|http://m.yahoo.com/htcwf/search?p=EURPLN=X||200.0|1278490511305
5|EUR/USD|EURUSD=X|1.25789999961853|-0.00469999993219972|-0.376199990510941|1.26170003414154|1.26259994506836|1.25689995288849|0|http://m.yahoo.com/htcwf/search?p=EURUSD=X||300.0|1278490511305
6|EUR/CHF|EURCHF=X|1.33689999580383|-0.000899999984540045|-0.0710000023245811|1.33879995346069|1.33910000324249|1.33609998226166|0|http://m.yahoo.com/htcwf/search?p=EURCHF=X||400.0|1278490511305
sqlite>
Note the last _id (here 6) and add new currency with _id higher by 1 (so here, 7):
Code:
insert into quotes (_id, _name, _symbol) values (7, "EUR/GBP", "EURGBP=X");
Check if it has been added:
Code:
select * from quotes;
Sample output:
Code:
sqlite> select * from quotes;
_id|_name|_symbol|_price|_change|_percent|_open|_high|_low|_volume|_link|_type|_sequence|_updatetime
2|CHF/PLN|CHFPLN=X|3.08299994468689|0.0116999996826053|0.381900012493134|3.07209992408752|3.08550000190735|3.07010006904602|0|http://m.yahoo.com/htcwf/search?p=CHFPLN=X||0.0|1278490511305
3|USD/PLN|USDPLN=X|3.27649998664856|0.0200999993830919|0.617200016975403|3.25550007820129|3.27959990501404|3.24499988555908|0|http://m.yahoo.com/htcwf/search?p=USDPLN=X||100.0|1278490511305
4|EUR/PLN|EURPLN=X|4.1217999458313|0.0151000004261732|0.367700010538101|4.11250019073486|4.12349987030029|4.10799980163574|0|http://m.yahoo.com/htcwf/search?p=EURPLN=X||200.0|1278490511305
5|EUR/USD|EURUSD=X|1.25789999961853|-0.00469999993219972|-0.376199990510941|1.26170003414154|1.26259994506836|1.25689995288849|0|http://m.yahoo.com/htcwf/search?p=EURUSD=X||300.0|1278490511305
6|EUR/CHF|EURCHF=X|1.33689999580383|-0.000899999984540045|-0.0710000023245811|1.33879995346069|1.33910000324249|1.33609998226166|0|http://m.yahoo.com/htcwf/search?p=EURCHF=X||400.0|1278490511305
7|EUR/GBP|EURGBP=X|||||||||||
sqlite>
Quit sqlite:
Code:
.quit
Push the file back to the phone:
Code:
adb push stock.db /data/data/com.htc.dcs.service.stock/databases/stock.db
Sample output:
Code:
d:\Projects\Android\tools>adb push stock.db /data/data/com.htc.dcs.service.stock/databases/stock.db
341 KB/s (5120 bytes in 0.014s)
Restart phone.
See if that worked
I hope HTC (or Yahoo) will be able to fix that, because the above is really a long process...
Anyway, I can't make it work. Entering "ps | grep Stock" gives me a "grep: permission denied" error message. I did some searching and I believe this is what people mean by saying "you need root access", right? I'll come back when I'm rooted (i.e. when I find a decent guide for rooting 2.1).
Thanks for your time & effort man. I really appreciate it.
eeVoskos said:
Anyway, I can't make it work. Entering "ps | grep Stock" gives me a "grep: permission denied" error message.
Click to expand...
Click to collapse
You can try to omit the "optional" part (steps 6-9) - the ps thing was just to make sure that Stock isn't running. But I noticed anyway that it never ran in the background when I closed it on the phone. Try to adb pull and adb push and see if you'll get any permission issues. If you do, then you indeed need a root (sorry I can't check that as I'm rooted)
A couple of days ago I updated the ROM of my HTC TD2, with the most recent one of HTC (WM6.5, Sense 2.5.20113030.0). Afterwards I noticed that I also could not get the stock app to accept the code EURUSD=X.
You mention the following
The same problem exists in the latest rom of HD2, but people have figured a work-around, by changing a file under "Application Data\HTC\", but this file doesn't exist on Android.
Click to expand...
Click to collapse
Can you tell me what that work-around is or point me to it? Hopefully this can help me.
Thank you in advance.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=706732
eeVoskos said:
Check this thread:
Click to expand...
Click to collapse
Thank you for the link (which I am not allowed to repost ).
Last Monday I wrote an e-mail to HTC about this problem and a couple of days later I got a reply. They told me they tried to search for the currency rate (eurusd) and that they got a result. So I tried again and lo and behold I got a result as well. Searching for eurusd=x gave me a result while last weekend it was not working.
So I tried several other currency rates and they all rendered a result, also eurgbp=x. Perhaps it is also fixed for the Android app.
[Extra information added below]
Tried again and nothing
I was connected with a data connection to my carrier, so I switched to my wifi connection. Tried again and... result.
So it seems to be a difference in communication between an ordinary data connection and a wifi connection. Maybe this will help someone
Wird problem. I tried it too on both UK and Greek carriers and on WiFi, but nothing. No result for either of them: "eurgbp=x", "eurgbp", "eurusd=x", "eurusd". I have been trying occasioanly more than one month now.
I think I should drop them an email too...
Why don't you do a soft (temporary) root and make the database entries as described in here? I did it and now I got all the stuff I need, and no trace of root on the device.
Just installed Elelinux-7.1.0-Hero-v2.1, poked around in Dev Tools, and apparently turned on some debugging feature I should not have. Now my phone goes into a reboot loop. It isn't a full reboot... only the Android boot animation is shown, not the initial HTC splash screen. It makes it up to the lockscreen and the phone is responsive for about 10 seconds before it freezes up and reboots.
This isn't enough time for me to unlock the screen, open the app drawer, run Dev Tools, and change back the setting before the phone reboots. Is there another way of manually clearing the Dev Tools settings without having to do a factory wipe?
Since I can't get into Dev Tools now, I cannot say which options were enabled. I turned on one that shows the touch coordinates, and I think another that shows the running processes (trying to track down battery drain issues). There may have been a couple of others, but due to the delay in the reboot, it's hard to tell exactly which one is the culprit.
So I'm hoping there is some way to bring up the phone in single-user mode, edit or delete a settings file, and then rebooting the phone. I'm using the AmonRA recovery console, if that helps.
I'd just reflash...
Yeah, there isn't much on the phone yet, so I could do a wipe and not lose anything, but I'd rather see if there is a way to recover in case something like this happens again in the future.
I did find an issue tracker page on Google that describes the problem, and a couple of proposed fixes. I'm not allowed to post links yet, so demangle this to bring up the page. I'm going to try editing the settings.db file and hopefully that will fix things:
ht tp://code.google.com/p/cyanogenmod/issues/detail?id=1026
Hooray, editing the settings.db file worked! I followed the suggest posted by cryptographrix in post #14 of the code.google.com thread:
Code:
$ [B]./adb shell[/B]
/ # [B]mount /data[/B]
/ # [B]mount /system[/B]
/ # [B]/system/xbin/sqlite3 ./data/data/com.android.providers.settings/databases/settings.db[/B]
SQLite version 3.7.2
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
sqlite> [B].header ON[/B]
sqlite> [B]select * from system where name="show_processes";[/B]
_id|name|value
109|show_processes|1
sqlite> [B]update system set value=0 where name="show_processes";[/B]
sqlite> [B]select * from system where name="show_processes";[/B]
_id|name|value
109|show_processes|0
sqlite> [B].quit[/B]
/ # [B]reboot[/B]
*I'm not updating it, but many users find this useful, so thread is kept as is for now*
Not sure if anyone got so far, to getting the honeycomb showing connection and selectable APN in settings?
anyways,
from my port of honeycomb to folio100, and now experiments with a500.. i got huawei dongle's running using the builtin functions.
you will need to have root'd your device. and this might break a system-update, if any of my files are updated during next OTA..
but back to the working 3G.
Working 3G USB dongles:
Do note, your modem version can be seen on its white label written with very small text.
some modems require zerocd (linuxtool) or commands executed in windows to disable the mass storage part of it. (search google for the commands)
* ZTE MF 639 (might need roaming enabled to get data working)
* Vodafone K3765-H
* Vodafone K3715
* Vodafone K3565 / Huawei E160
* Huawei E169
* Huawai E170
* Huawai E171
* Huawei E173
* Huawei E1550
* Huawei E1692
* Huawei E1750
* Huawei E1752
* Huawei E1820
* HUAWEI K3520
* HUAWEI K3565 -Rev 2
Download View attachment 3g-usb-stock1.zip for 3.0.1 stock release Acer_A500_1.141.01_EMEA_GEN3: (vermagic=2.6.36.3 SMP preempt mod_unload ARMv7)
Download View attachment 3g-acer31stock-usb.zip for 3.1 stock release Acer_A500_3.019.01_COM_GEN1 (vermagic=2.6.36.3-00005-g5dff38c SMP preempt mod_unload ARMv7)
HOWTO:
- first: Backup your /system/build.prop on the tablet , just copy the file to a safe place, as its important if you wish to do a online update later on.
- updated zip, so you can now install the zip as an "update" using ClockWorkMod/CWM if you got this installed.
- download the "system.zip" attached to this post.
- unpack all files to a temporary folder ie. C:\myfiles
- assuming you got adb running
* push files to your tablet with;
adb shell mkdir /data/local/temp
adb push C:\myfiles\system /data/local/temp/
* next run
adb shell
* then run all commands below in the shell
su -
mount -orw,remount /system (i forgot this line, ITS IMPORTANT)
cp -a /data/local/temp/* /system/
chmod 4755 /system/bin/pppd
chmod 4755 /system/bin/rild
chmod 755 /system/bin/rild.run
chmod -R 755 /system/etc/ppp
If you done these steps correctly, and you reboot.
you will now have a working 3G option in Settings -> wireless networks
so you can configure your APN now and connect to your 3G network.
and you got it all automated with honeycomb 3g! no terminal needed to start 3G!
HINTS
- Other reports are to remember to "Disable PIN" on the card.. I have no personal experience on this part, but check up on it, if its not working perfectly, or no data, but network is ok.
- I got reports back about enabling roaming to make it work, and also remember the story from Folio100 with 3G dongles..
so if you cannot get data connection at all, try to enable roaming and see if APN does not appear which matches your isp. maybe read you ISP website to confirm it.
- If you happen to remove the dongle, there is a solution (using as example gscript) to restart the ril daemon.
in a shell you can restart the ril-daemon if you reinsert the 3g usb dongle.
do it like this in the shell:
su -
stop ril-daemon
start ril-daemon
HOWTO FOR RESET'ing ,massstorage on Huawei modems.
tasmak said:
Insert modem into pc and wait for driver to install
check in device manager which com port is assignated to your modem
download putty
here the.earth.li/~sgtatham/putty/latest/x86/putty.exe
close every program related to modem
run putty
click serial below port number and then change port number to one previously founded
click open
write atz and press enter, modem should answer ok
write ati and press enter, modem should give name, type, etc
write AT^U2DIAG=0 and press enter, zero cd is now disabled
You need also put sim card from modem to any phone and disable pin checking.
Click to expand...
Click to collapse
Remember to press "thanks" if you find it useful
you forgot to say to remount the system to rw....
thor2002ro said:
you forgot to say to remount the system to rw....
Click to expand...
Click to collapse
i believe that line is even highlighted and commented as forgotten previously, so its there for sure..
you cannot miss it
or do you mean some other /system mount?
Looking forward to testing this. Mine is a Verizon Novatel Wireless, do you think this will work with it?
JackMetal said:
Looking forward to testing this. Mine is a Verizon Novatel Wireless, do you think this will work with it?
Click to expand...
Click to collapse
it would probably work, if you got the huawei dongles..
the major is if you need different kernel modules.. those are in the other thread if needed, i included those without -gxXXXX version info.. as thats the ones for the latest EU model update and works here.
Thanks Dexter. One question. Can these files be pushed using terminal emulator instead?
Sent from my A500 using Tapatalk
Yes,
this can of course be done in a terminal, if needed.
just forget the part with "adb",
but all the commands should be executed, and the files copied to a sdcard temporily and copy from that location to the /system
Dexter thanks. What Huawei modem do you recommend?
Sent from my A500 using Tapatalk
manfly9884 said:
Dexter thanks. What Huawei modem do you recommend?
Click to expand...
Click to collapse
i use a E1752 model myself, which i have disabled storage on, before using it on my tablets...
Thanks
Sent from my A500 using Tapatalk
this wil break the OTA ... because of the build.prop modifications...
thor2002ro said:
this wil break the OTA ... because of the build.prop modifications...
Click to expand...
Click to collapse
Correct, that is also mentioned in post #1.
custom build.prop can be made if the lines at the bottom are copied to your own version you got with a simple one-liner in a shell.
echo "picasso.3g=true
rild.libpath=/system/lib/libhuawei-ril.so
rild.libargs=-d /dev/ttyUSB2
ro.pad.features.modem=true " >>/system/build.prop
so it works on any new build.prop change..
Dexter_nlb said:
Correct, that is also mentioned in post #1.
custom build.prop can be made if the lines at the bottom are copied to your own version you got with a simple one-liner in a shell.
echo "picasso.3g=true
rild.libpath=/system/lib/libhuawei-ril.so
rild.libargs=-d /dev/ttyUSB2
ro.pad.features.modem=true " >>/system/build.prop
so it works on any new build.prop change..
Click to expand...
Click to collapse
got an idea.... make two scripts for applying and removing....
so we can maintain the OTA capability...
thor2002ro said:
got an idea.... make two scripts for applying and removing....
so we can maintain the OTA capability...
Click to expand...
Click to collapse
ill figure something out.. maybe an actual patch can be made?
i do know how to make the different update.zip's ... just got A500, so not sure what is possible and not, on this semi-blocked tablet..
but also know motorola mobiles, i have had my part of blocked devices, and do workarounds to make something work.
1 update.zip to install? and another to remove?
we dont have custom recovery working.... so update zip wont work... scripts or apk are the only choices i see...
thor2002ro said:
we dont have custom recovery working.... so update zip wont work... scripts or apk are the only choices i see...
Click to expand...
Click to collapse
no no, i dont talk CWM.. i use the builtin tegra recovery for the additional functions.. the recovery is very close to CWM, but uses the old htc way, and do have specific write command for writing images..
ill check it out soon.. a500 is still new to me, although tegra is not...
I know im probably not doing something right, i followed the steps, and when i tap mobile networks it force closes?
Good news. Thanks
manfly9884 said:
Thanks
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
wounderful work！
good point！
Any reason this wouldn't work on the asus transformer?
So, I just set a pin lock screen on my Sprint GS5, and I immediately locked it, and went to unlock it (to see what the lock screen looked like), and I entered the pin that I just set on the phone, and it said that it was incorrect. I know what I entered, and the lock screen is not taking it. I have tried multiple combinations involving numbers near the numbers I put in, and nothing has worked. I'd really like to remove the pin lock without erasing anything, as I have things I have not backed up that are not on my SD card. I did not have the device set up with Android Device Manager, nor my Samsung Account. The phone was rooted with Towel Root.
Is there anything I can do other than a factory reset? This is really aggravating me.
Now you know why you should always make a backup first.
You should be able to remove the PIN using Paulyhofman's method.
This requires ADB debugging on or in the alternative, installing a custom recovery.
If the Sprint bootloader is locked and hence you can't do a proper custom recovery, then do a forum search as there are several other PIN bypass methods in existing threads. Actually doing a search should always be the first step before posting any question.
adb shell
# sqlite3 /data/data/com.android.providers.settings/databases/settings.db
sqlite> update secure set value=65536 where name='lockscreen.password_type';
sqlite> .exit
# exit
adb reboot
.
fffft said:
Now you know why you should always make a backup first.
You should be able to remove the PIN using Paulyhofman's method.
This requires ADB debugging on or in the alternative, installing a custom recovery.
If the Sprint bootloader is locked and hence you can't do a proper custom recovery, then do a forum search as there are several other PIN bypass methods in existing threads. Actually doing a search should always be the first step before posting any question.
adb shell
# sqlite3 /data/data/com.android.providers.settings/databases/settings.db
sqlite> update secure set value=65536 where name='lockscreen.password_type';
sqlite> .exit
# exit
adb reboot
.
Click to expand...
Click to collapse
I must not have had usb debugging enabled on my phone because ADB says device not found. I was able to copy the settings.db file to my SD card using aroma, but I try to open it in SQLite reader, and it says it is encrypted. Do you know how to decrypt this file? Or anyone?
Okay, I found a solution. Instead of modifying settings.db, I deleted /data/system/locksettings.db, and the lock screen was removed.
I did this from within the aroma file manager. I finally have my phone back! I will be setting up remote controls, usb debugging, and backing some stuff up now.
So the Lockscreen on my new HD 10 is pretty garbage, so far I've managed to get rid of the ads, but I can't change the Lockscreen wallpaper and I don't get any preview of a notification (e.g. the mail subject etc.)
Is there a workaround for those problems? Because simply isntalling a new lockscreen app, just makes me unlock my tablet twice, which isn't ideal.
Did you manually disable com.amazon.kindle.kso (special offers/lockscreen ads) over ADB in fire os 5.4.0.0 or lower using the method DragonFire1024 posted? If so, then yes, I found a fix that allows you to see notifications on the lockscreen without swiping down, more like the stock Android 5.x lockscreen.
lakitu47 said:
Did you manually disable com.amazon.kindle.kso (special offers/lockscreen ads) over ADB in fire os 5.4.0.0 or lower using the method DragonFire1024 posted? If so, then yes, I found a fix that allows you to see notifications on the lockscreen without swiping down, more like the stock Android 5.x lockscreen.
Click to expand...
Click to collapse
I did it over adb yes, but on the newest release of fire OS (5.6)
wieli99 said:
I did it over adb yes, but on the newest release of fire OS (5.6)
Click to expand...
Click to collapse
I thought Amazon broke the ability to disable apps over ADB with the release of 5.4.0.1. Did that not affect the new 2017 HD 10?
Sent from my Amazon KFGIWI using XDA Labs
lakitu47 said:
I thought Amazon broke the ability to disable apps over ADB with the release of 5.4.0.1. Did that not affect the new 2017 HD 10?
Click to expand...
Click to collapse
It works for me in adb shell with
pm clear --user 0 com.amazon.kindle.kso
Well, I don't know if this will work with your exact tablet, but try this:
1. If you haven't already, get the Google Play store/services on your tablet
2. Download this app without the quotes: "https://play.google.com/store/apps/details?id=by4a.setedit22&hl=en"
3. Follow on-screen instructions to grant tablet permission to edit secure settings (worked on 2 devices on 5.6)
BE CAREFUL WHAT YOU EDIT. If you change the wrong settings, your tablet can and probably bootloop or get bricked.
4. Go to the "secure" tab, scroll down to "limit_ad_tracking" and change value to 1
5. Go to "global" tab, scroll down to "LOCKSCREEN_AD_ENABLED" and change value to 0. Immediately reboot your device.
This was tested and worked on two HD 8 tablets on 5.6, with special offers manually disabled on 5.4. Since Amazon still thinks you are subscribed to special offers (ads), the notifications are hidden. This workaround actually makes the ads gone (hopefully), so the notifications will appear as soon as you turn on the screen, without a swipe down gesture.
Open up command prompt. Type in "adb shell", Then type in "su"
Then copy this into command prompt.
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '1' WHERE name = 'lockscreen.disabled'"
You will not get a confirmation, now type "exit", then type "reboot".
Let the device reboot and enjoy! Now install a new lockscreen.
Want it back?
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '0' WHERE name = 'lockscreen.disabled'"
*This is messing with the sqlite in the actual android system files, please becareful and don't go around changing values in system files.
source: Tips Tricks and the Root
Jned said:
Open up command prompt. Type in "adb shell", Then type in "su"
Then copy this into command prompt.
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '1' WHERE name = 'lockscreen.disabled'"
You will not get a confirmation, now type "exit", then type "reboot".
Let the device reboot and enjoy! Now install a new lockscreen.
Want it back?
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '0' WHERE name = 'lockscreen.disabled'"
*This is messing with the sqlite in the actual android system files, please becareful and don't go around changing values in system files.
source: Tips Tricks and the Root
Click to expand...
Click to collapse
do you have to have root for this? i did su and it said, " su not found."
Jned said:
Open up command prompt. Type in "adb shell", Then type in "su"
Then copy this into command prompt.
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '1' WHERE name = 'lockscreen.disabled'"
You will not get a confirmation, now type "exit", then type "reboot".
Let the device reboot and enjoy! Now install a new lockscreen.
Want it back?
sqlite3 /data/system/locksettings.db "UPDATE locksettings SET value = '0' WHERE name = 'lockscreen.disabled'"
*This is messing with the sqlite in the actual android system files, please becareful and don't go around changing values in system files.
source: Tips Tricks and the Root
Click to expand...
Click to collapse
Like that one eh? That was one of the first ones I found. Works without root too.
wieli99 said:
So the Lockscreen on my new HD 10 is pretty garbage, so far I've managed to get rid of the ads, but I can't change the Lockscreen wallpaper and I don't get any preview of a notification (e.g. the mail subject etc.)
Is there a workaround for those problems? Because simply isntalling a new lockscreen app, just makes me unlock my tablet twice, which isn't ideal.
Click to expand...
Click to collapse
Personally, I'd suggest just rooting it and disabling it. I did it a few months ago on my Dad's HD10 by following one of the guides here- I just can't remember which one, but it was simple. I also installed Gravity Screen Pro since I have his set up more like a laptop. The screen turns on/off when opened/ closed without ever having to see a lock screen. I might stop by my parents today (depending on the weather) and if i do, I'll try to trace my steps and link the guide I followed
dondraper23 said:
Personally, I'd suggest just rooting it and disabling it. I did it a few months ago on my Dad's HD10 by following one of the guides here- I just can't remember which one, but it was simple. I also installed Gravity Screen Pro since I have his set up more like a laptop. The screen turns on/off when opened/ closed without ever having to see a lock screen. I might stop by my parents today (depending on the weather) and if i do, I'll try to trace my steps and link the guide I followed
Click to expand...
Click to collapse
There are also a few Xposed modules that work too.
Sent from my Samsung Galaxy S4 using XDA Labs
wieli99 said:
So the Lockscreen on my new HD 10 is pretty garbage, so far I've managed to get rid of the ads, but I can't change the Lockscreen wallpaper and I don't get any preview of a notification (e.g. the mail subject etc.)
Is there a workaround for those problems? Because simply isntalling a new lockscreen app, just makes me unlock my tablet twice, which isn't ideal.
Click to expand...
Click to collapse
I followed this guide: https://forum.xda-developers.com/hd8-hd10/help/root-required-completely-disable-enable-t3739257
I just had to do it again today because attempted to use Xposed and wound up getting in over my head and got caught in a bootloop, but at least I can reaffirm that this guide works
---------- Post added at 07:56 AM ---------- Previous post was at 07:49 AM ----------
DragonFire1024 said:
There are also a few Xposed modules that work too.
Sent from my Samsung Galaxy S4 using XDA Labs
Click to expand...
Click to collapse
I love all your posts- it's your guide I followed to disable the lockscreen. Unfortunately, Xposed is a bit much for a "noob" like me. I attempted to install it and got caught in a bootloop and had to do a factory reset. Considering what my dad uses it for, the negatives far outway the positives for me to bother with Xposed ever again