Hello, I defy you nandroid install the "4.5.1-DFP-134-132-Android 2.3.6", everything works correctly, but .. the camera does not work, I have the green lens and probe all GREENBREADMOD patches ... and every time I do it stays in the motorola logo ... is there any solution for this function in nandroid defy green lens? from already thank you very much!
PS: I am new to this consultation and translated by google translator, so excuse the English.
Wipe data/cache and dalvik might work
Sent from my MB525 using xda premium
me 2~ so sad of green camera...
Related
Hi guys u have a standard t mobile mb525 defy rooted with 2ndinit installed the problem i have is i have no camera preview when i open the camera its like theres something over the lens its just black but if i take a picture and go to the gallery its taken the picture fine it also does the same when trying to play videos
Can anyone please help?
Sent from my MB525
Anybody?
Sent from my MB525
What ROM are you on?? Since when you are having the problem??
Just the standard t mobile on that came with the phone i only noticed the problem few days after i rooted it :'(
Sent from my MB525
m0nk3yb0y94 said:
Just the standard t mobile on that came with the phone i only noticed the problem few days after i rooted it :'(
Sent from my MB525
Click to expand...
Click to collapse
Try to re-flash your stock sbf. And root it again..
Doesn't matter from where I send it, what matters is written above
@m0nk3yb0y94
Have u tried to delete data of the camera under
settings >apps >manage apps > all > camera > delete data
Also try some other camera app.. 'Camera360' for example.
Doesn't matter from where I send it, what matters is written above
m0nk3yb0y94 said:
Hi guys u have a standard t mobile mb525 defy rooted with 2ndinit installed the problem i have is i have no camera preview when i open the camera its like theres something over the lens its just black but if i take a picture and go to the gallery its taken the picture fine it also does the same when trying to play videos
Can anyone please help?
Sent from my MB525
Click to expand...
Click to collapse
This is caused by 2nd-init
Did you flash 720p patch?? If you did then you wil get black screen for preview. Go to 2nd-init and select boot as normal boot. It should work
PS. I had to reflash stock rom, root, install 2nd-init and then NOT apply the 720p patch!
hi i installed CM10 aug 02 build from quarx last week .. Everything was fine ... but when i installed the latest Aug 04 build i am unable to install the battery fix and my battery is dead. Now if i want to charge from wall cable it shows a ? mark but it can still go into recovery. And if i try to charge using usb it will boot but its not at all holding the charge. I tried repeatedly to factory wipe and install the battery fix. Some how its not getting installed. Can somebody help me with this. I have seen similar threads but they were related to new batteries or chargers. In my case everything is from motorola.
waiting anxiously ...
Thanx in advance
Did you checked if the download was for Defy or Defy+(mb525 or mb526)?
Which Defy model did you have?
t0n0n said:
Did you checked if the download was for Defy or Defy+(mb525 or mb526)?
Which Defy model did you have?
Click to expand...
Click to collapse
I downloaded mb526 and i have Bayer device Defy
Flash the battery fix, you can find link in numerous threads. Quickly you can check in Auris thread for quarx ICS builds in general section.
Sent from my MB526 using xda app-developers app
premaca said:
Flash the battery fix, you can find link in numerous threads. Quickly you can check in Auris thread for quarx ICS builds in general section.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Now he can't, unless the phone is loading bootloader before showing the no batery error.
Can you confirm if your LED blinks blue before the mensage appears??
If Yes, press vol Down when the light appears and flash the Battery fix from Auris.
If No, I think you will have to flash a new SBF. You can try to flash the easy_recovery.sbf from m11kkaa. Use it to flash the battery fix and be happy .
To enter the easy recovery, you have to pull the battery off, wait 5 seconds, hold vol down + power, put the battery back. When the green android appears, press both vol up and vol down.
Have u got green or red lense?
my green lense works with every epsylon and quarx build without any special setting or apps like battery fix.
solved
Thanx guys for your replies.
I was able to enter the recovery . so i started experimenting with various builds. I installed epy's latest build over the same kernel without any battery fix and it started charging again. so i left it as it is without any change. Why breaking it when its working ..
i thank one and all for they replies. You guys rock
:good::good::good:
I am running CM10 latest Quarx build on my Defy+ with bl7 after installing the update, menu button light is not working :crying: Is there any way to get it back I tried rolling it back to the CM7 but no use. Any help is really appreciated. Sorry for my bad English...!!
I have the same problem, and the exact same button
I think the led behind that button is not working anymore...
Try to install the CM as indicated in the topics (respect the steps). Do it from begining carefully (flash the stock ROM).
Same here
Sent from my MB526 using xda app-developers app
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
hacktheheaven said:
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
Click to expand...
Click to collapse
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Thanx for the reply
pgreed said:
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Click to expand...
Click to collapse
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
hacktheheaven said:
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
Click to expand...
Click to collapse
I think the high brightness settings would have burned it
Then there is no way to get it back......!! Wish I didn't mess with that settings....
Sent from my MB526 using xda app-developers app
hacktheheaven said:
Wish I didn't mess with that settings....
Click to expand...
Click to collapse
I didn't messed with buttons lights, and still got 3 burned LEDs. The first to go was "search". A month after that, the "menu" button went dark. Now the "back" is gone too. Just "home" remains with light. I don't think it's a software issue... More likely a project flaw or bad manufacturing (I still use CM7, no tweaks).
Last week I also got a "stain" (a lot of bad pixels) on the center of the screen. Just turned the phone off and put it in the freezer for 12 hours. After that, it was new again (lucky me). Yeah, the famous trick works folks (unfortunally, not for the capacitive LEDs though).
Floripa said:
I don't think it's a software issue... More likely a project flaw or bad manufacturing
Click to expand...
Click to collapse
I'm inclined to agree. It seems fairly common. My menu button LED failed when my Defy+ was around 6 months old and completely stock. I put it down to a hardware failure.
Time for me to claim the Warranty
I will unroot the device and will claim the warranty...!! :good: But only problem is I have to wait untill the device returns back and have to use that ****sung again sorry Typo Samsung* :crying:
Hi All,
I am one of the victims who mistakenly flashed defy+ sbf on a normal defy with green lens. It was bricked for quite some time and then later magically one day DEFYPLUS_U3_4.5.1 134_DFP-231 SBF worked. Now the phone (orginally MB525) only accepts custom ROMS made for MB526 with camera not working. the message i get is "Can't connect to camera". Recently i tried Quarx build made for MB526 (4.1.2) and suprisingly my camera was working fine. The only problem i was having is my phone would not give me a ringtone music when a call comes and the moment i make a call the screen goes off. It will only come back ON when the other party disconnects. Sometimes that will also not happen and i will have to totally restart my phone (i am guessing the sensors are also not working). For some time I tried using option in Accessability saying power button ends call. Volume rocker turn of doesnt work.
Finally, now i am using a WakJIUI Rom based on GB. Everything works perfectly except for camera and sensor. I have a workaround of sensor where i can choose not to have the screen turned off while on call and volume rocker key works like a charm.
Now, the reason why i started this thread is a vauge idea came to me where i am thinking of having a WakJIUI Rom as stable and use Quarks 4.1.2 build as second boot. I have no idea how to use dual boot. i have read forums but they are confusing.
Anybody who can help...
You cannot dual boot Quarx's CM10.
You can flash Quarx's CM10 and Jelly X kernel to fix ringtone bug, and to fix proximity issue there is an option for "Inaccurate proximity sensor" in Settings > Display under CM10
You can try to fix proximity sensor issue, watch the following video: http://youtu.be/uMk1S90MjbY
Sent from my MB526 using xda premium
hackergnome said:
You cannot dual boot Quarx's CM10.
You can flash Quarx's CM10 and Jelly X kernel to fix ringtone bug, and to fix proximity issue there is an option for "Inaccurate proximity sensor" in Settings > Display under CM10
You can try to fix proximity sensor issue, watch the following video: http://youtu.be/uMk1S90MjbY
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks for the insight. One question again : In past when i tried flashing kernal of CM7 and CM9 my phone gets into soft brick mode. where i again have to flash the sbf i mentioned above. i am guessing thats because these kernals are made for MB525. Now that my phone identifies itself as MB526 will this jelly X kernal work....
JadhavN said:
Thanks for the insight. One question again : In past when i tried flashing kernal of CM7 and CM9 my phone gets into soft brick mode. where i again have to flash the sbf i mentioned above. i am guessing thats because these kernals are made for MB525. Now that my phone identifies itself as MB526 will this jelly X kernal work....
Click to expand...
Click to collapse
no, no need to flash any sbf, because it's 2nd-boot
Flash rom, flash gapps, flash jellyx
if you get black screen after bootmenu pull the battery and restart
Sent from my MB526 using xda premium
hackergnome said:
no, no need to flash any sbf, because it's 2nd-boot
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks for the advise man. I did complete data wipe and cache partition. Flashed the Jelly X Kernal, then installed the sister JB. My camera is working fine. Ringtone issue fixed and also thanks to that video maker, my proximity sensor issue is also resolved.
JadhavN said:
Thanks for the advise man. I did complete data wipe and cache partition. Flashed the Jelly X Kernal, then installed the sister JB. My camera is working fine. Ringtone issue fixed and also thanks to that video maker, my proximity sensor issue is also resolved.
Click to expand...
Click to collapse
:thumbup:
Sent from my MB526 using xda premium
Hello Guys!
Today I successfully installed the new MS2Ginger 5 ROM on my Defy BL7 and I was surprised, because THE CAMERA IS WORKING!!!!!!!!
I am wondering about can anyone crreate a flashable zip from the new MS2Ginger ROM including the SOC and Bayer camera files for BL7 users who want to use CM7???
In my opinion a lot of users would really apprechiate it :angel:
Camera Work on any custom kernel 2ndboot Roms`s ( quarx CM10 & CM10.1 and ...)
jalal-jap said:
Camera Work on any custom kernel 2ndboot Roms`s ( quarx CM10 & CM10.1 and ...)
Click to expand...
Click to collapse
But not on CM7
4.2.2 camera installation help
Hi guys ...
Just wanted to install the 4.2.2 camera/gallery in my defy....
i've been following this thread
http://forum.xda-developers.com/showthread.php?t=1965259
but was not abe to do it .... in fact i ended up removing gallery and camera
but i managed to install the keyboard
Please any1 .. any ideas ...
i am using CM10 by quarx 09.04 2ndboot
Try this
ibtihaaz said:
Hi guys ...
Just wanted to install the 4.2.2 camera/gallery in my defy....
i've been following this thread
http://forum.xda-developers.com/showthread.php?t=1965259
but was not abe to do it .... in fact i ended up removing gallery and camera
but i managed to install the keyboard
Please any1 .. any ideas ...
i am using CM10 by quarx 09.04 2ndboot
Click to expand...
Click to collapse
Download from here - http://forum.xda-developers.com/show....php?t=1965895
Flash through cwm, rename gallery2.apk to gallery2.bak, check permissions, reboot. If camera doesn't show in launcher then clear cache of gallerygoogle, reboot...If camera is laggy then disable hwa for it. This worked for me, but saving an editing picture gave a FC...
Hope this helps...
Link !!
hotdog125 said:
Download from here - http://forum.xda-developers.com/show....php?t=1965895
Flash through cwm, rename gallery2.apk to gallery2.bak, check permissions, reboot. If camera doesn't show in launcher then clear cache of gallerygoogle, reboot...If camera is laggy then disable hwa for it. This worked for me, but saving an editing picture gave a FC...
Hope this helps...
Click to expand...
Click to collapse
Thank for reply m8... but link is not working
Pliz chk it for me thanks
Hello.can ask me some question？what is SCO and Bayer Camera？
Sent from my ME525~Chinese 2.3.6
Driver difference
Pason said:
Hello.can ask me some question？what is SCO and Bayer Camera？
Sent from my ME525~Chinese 2.3.6
Click to expand...
Click to collapse
Hi there .. i think the SOC=Green lens Camera ........... Bayer=Red lens camera
They uses different drivers to be able to work ...
if you flash SOC with Bayer drivers .. camera will not work .... if you flash Bayer with SOC drivers.. camera with not work
I think its something like this
will try
ibtihaaz said:
Hi there .. i think the SOC=Green lens Camera ........... Bayer=Red lens camera
They uses different drivers to be able to work ...
if you flash SOC with Bayer drivers .. camera will not work .... if you flash Bayer with SOC drivers.. camera with not work
I think its something like this
Click to expand...
Click to collapse
will try and let u know
The link is broken, Bro
How to install plz mention procedure
Hi bro Plz explain me the whole procedure. I had flashed the zip but got stuck on moto logo.
ToMpI97 said:
Hello Guys!
Today I successfully installed the new MS2Ginger 5 ROM on my Defy BL7 and I was surprised, because THE CAMERA IS WORKING!!!!!!!!
I am wondering about can anyone crreate a flashable zip from the new MS2Ginger ROM including the SOC and Bayer camera files for BL7 users who want to use CM7???
In my opinion a lot of users would really apprechiate it :angel:
Click to expand...
Click to collapse