Stock Rooted ATT A501 HC 3.2 Rom
Build Acer_A501_4.402.03_PA_ATT
I would suppose, this ROM is for US based ATT a501 tablets, running an ATT 4g networks. The rom operates on Beeline 3g Network. If it works on 4g networks, I cannot verify. But it works ok on 3g.
I did this, for some friends.
Stock Rooted Rom
Busybox installed
Superuser installed
Bootloader Blob removed
Updater.Script modified
All Acer and ATT apps included
Install
CWM
Do wipes;
1. Data
2. Cache
3. Dalvik (Advanced depending on version)
RA Recovery;
1. Wipe Data
2. Wipe cache
3. Wipe Dalvik-cache
4. Wipe system
MAKE YOUR RECOVERY or NAND BACKUP before you flash.
If you see "offset message", ignore.
Enjoy!!!
Download
Server 1
Server 2
Your awesome...thanks
Sent from my A501 using xda premium
daddyd21 said:
Your awesome...thanks
Sent from my A501 using xda premium
Click to expand...
Click to collapse
QFE
And thank you for posting it!
Moscow Desire said:
Stock Rooted ATT A501 HC 3.2 Rom
Build Acer_A501_4.402.03_PA_ATT
I would suppose, this ROM is for US based ATT a501 tablets, running an ATT 4g networks. The rom operates on Beeline 3g Network. If it works on 4g networks, I cannot verify. But it works ok on 3g.
I did this, for some friends.
Stock Rooted Rom
Busybox installed
Superuser installed
Bootloader Blob removed
Updater.Script modified
All Acer and ATT apps included
Install
CWM
Do wipes;
1. Data
2. Cache
3. Dalvik (Advanced depending on version)
RA Recovery;
1. Wipe Data
2. Wipe cache
3. Wipe Dalvik-cache
4. Wipe system
MAKE YOUR RECOVERY or NAND BACKUP before you flash.
If you see "offset message", ignore.
Enjoy!!!
Download
Server 1
Server 2
Click to expand...
Click to collapse
So appreciated! Will let you know if i see issues on mine.
Thanks!
---------- Post added at 01:20 PM ---------- Previous post was at 12:27 PM ----------
Ok, did some quick testing.
Did a straight install, and was getting some FC's... couldn't even connect to our 3g/4g network. so i did a factory reset (in cwm).
now that i'm up, i did a quick run at speedtest.net. I'm getting 3.36/2.35 Mbps.. Pretty much what i had before... only H+.. but at least i know.
Let's hope 3.2.1 comes soon from AT&T .
Thanks for providing this! So appreciate it!
You all are Welcome!
Enjoy the time you can now, because when baby comes , whîiiiiiiiiiiiiiiiwheeeeeeeeeeeeee
Bye Bey time...........
Wife= Moscow get up baby is crying....
Moscow=Its not my turn need to deodexed this app first
Wife = deodexed this
Moscow,
civato said:
Enjoy the time you can now, because when baby comes , whîiiiiiiiiiiiiiiiwheeeeeeeeeeeeee
Bye Bey time...........
Wife= Moscow get up baby is crying....
Moscow=Its not my turn need to deodexed this app first
Wife = deodexed this
Moscow,
Click to expand...
Click to collapse
Man, you sure know how to brighten my day!!!!
Info; She will check into the hosp next week on the 16th. Doctor wants to keep an eye on her. Not a specific date yet for the surgery, but should be near end of the month.
No Wife for 3 weeks = Big party for Moscow
Moscow Desire said:
Man, you sure know how to brighten my day!!!!
Info; She will check into the hosp next week on the 16th. Doctor wants to keep an eye on her. Not a specific date yet for the surgery, but should be near end of the month.
No Wife for 3 weeks = Big party for Moscow
Click to expand...
Click to collapse
Hope all goes well m8, and keep the house clean no drinking and wild party's.
And before dark into bed!
civato said:
Hope all goes well m8, and keep the house clean no drinking and wild party's.
And before dark into bed!
Click to expand...
Click to collapse
Of Course!!!
Related
This is for the Sprint Nexus S 4G (SPH-D720) only.
This includes a radio.
Do not flash this on any other phone.
Here is the official 2.3.5 -> 2.3.7 ota:
http://android.clients.google.com/p...41.signed-sojus-GWK74-from-GRJ90.2e8d4014.zip
This must be flashed in stock recovery over stock 2.3.5 (GRJ90).
You will lose root.
Boot into recovery (hold volumeUp + power).
If you see a yellow triangle, press power + volumeUp.
Select "Install update from sdcard," and select the file you downloaded. (It may be helpful to copy the file from download/ to the root of the sdcard beforehand.)
* * * To update to 2.3.7 / GWK74 without losing root: * * *
If you're rooted with stock recovery, first use this to flash clockworkmod or twrp.
. . . . . (Scroll down to Flash Resulting Output.)
. . . . . (If it shows an error, reboot and try again.)
Boot into recovery.
Install this to get back to stock 2.3.5.
. . . . . (Or if you're already on it, just reflash the boot image.)
Install the 2.3.7 update.
Install superuser.
To keep recovery from being wiped, install leave_the_twrp_alone.
If you're coming from a custom ROM, you might want to wipe dalvik and fix permissions.
Power OFF.
Power on.
Install & run BusyBox Installer.
NOTE: If you had downloaded the modded ota update before noon central time Sept. 20, please flash this to update your kernel if you have wifi problems.
Superuser md5sum: ca9d0de5dcdb54eda50ba66ae502c38c
Leave_the_twrp md5sum: 257e951f898906a864f070b47076729b
GRJ90 boot image md5sum: ccf3b6cace6d2d113c2c2b3e3242b876
The filenames of the ota updates begin with the first 12 characters of their SHA-1 checsums.
Thanks Jorge330823 for posting the update file, from which I was able to extrapolate the original filename and link.
Thanks morfic for the dalvik wiper.
Thanks Bugless Pete for the full boot image.
Ive installed this on my stock NS4G. Im on android 2.3.7 w/ wallet and everything seems to be working ok. Took longer than usual to boot though. Thanks!!!!
Why would you lost root flashing over a stock rom? It doesn't go and remove /bin/su and su apk does it?
I would expect you should be able to flash over a stock rooted rom no problem.
---------- Post added at 11:52 AM ---------- Previous post was at 11:40 AM ----------
I just did the OTA on a rooted stock 2.3.5 (ODEXed) without any troubles. My bootloader is still unlocked and I still have superuser installed afterwards.
superm1 said:
Why would you lost root flashing over a stock rom? It doesn't go and remove /bin/su and su apk does it?
I would expect you should be able to flash over a stock rooted rom no problem.
---------- Post added at 11:52 AM ---------- Previous post was at 11:40 AM ----------
I just did the OTA on a rooted stock 2.3.5 (ODEXed) without any troubles. My bootloader is still unlocked and I still have superuser installed afterwards.
Click to expand...
Click to collapse
It changes the permissions of su from 6755 to 0755. I was under the impression that this would have ill effects.
thanks for the "without losing root" method and the update. i was having issue with wifi error, but the update you posted solved the problem.
Maximilian Mary said:
It changes the permissions of su from 6755 to 0755. I was under the impression that this would have ill effects.
Click to expand...
Click to collapse
Ah, you're right. I didn't actually try to launch an application that required su, and now when I do I see that there are permissions problems. Fortunately the superuser apk is still there and generates a zip file to easily redo it it from recovery.
i don't undetstand. why google always update ns 4g and leave ns alone since 2.3.5.....
or waiting for ice cream sandwich...
Sent from my Google Nexus S using XDA App
eridroid said:
i don't undetstand. why google always update ns 4g and leave ns alone since 2.3.5.....
or waiting for ice cream sandwich...
Sent from my Google Nexus S using XDA App
Click to expand...
Click to collapse
I feel as if Sprint is the new T-Mobile for Nexus devices and will get the Nexus Prime before anyone else this time around. I think T-Mobile has seen it's days for at least until we find out what happens with them.
Honestly. I think T-Mobile is on it's way out. It was GOING to go to ATT and it would eventually roll over TO ATT. Not stay separate. OR, in case, now, I guess Sprint would be able to get them like they wanted? Where it would make sense for Google to back Sprint first like they have been doing. Or at least Sprint is there go to carrier now as the cheapest stable where T-Mobile is a little shaky I guess.
If anyone is wondering KE1 radio works with 2.3.5. I am running the cm7 kang btw.
Sent from my Nexus S 4G using XDA App
eridroid said:
i don't undetstand. why google always update ns 4g and leave ns alone since 2.3.5.....
or waiting for ice cream sandwich...
Sent from my Google Nexus S using XDA App
Click to expand...
Click to collapse
Go to Sprint. Plans are cheaper n e ways
snandlal said:
Go to Sprint. Plans are cheaper n e ways
Click to expand...
Click to collapse
Great! I guess Sprint has coverage in Shanghai, where his profile says he is located.
I'll also be switching to Sprint. I imagine their coverage in Greece is outstanding!
Google is shooting itself in the foot with that behavior. They need to change or their policies will eventually shoot back.
chewbz said:
If anyone is wondering KE1 radio works with 2.3.5. I am running the cm7 kang btw.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Hmm.. I thought I read this would cause problems.. No?
. . NS4G . . CM7 . .
georgemv said:
Great! I guess Sprint has coverage in Shanghai, where his profile says he is located.
I'll also be switching to Sprint. I imagine their coverage in Greece is outstanding!
Google is shooting itself in the foot with that behavior. They need to change or their policies will eventually shoot back.
Click to expand...
Click to collapse
You think it's google's choice? I can almost guarantee it's a matter of the carriers not being willing to work with google to get things like full Google Voice integration working on their networks... Google wants their stuff EVERYWHERE, and it needs to be everywhere to succeed. It's the carriers that are afraid of google giving people power to do what they want. Not a single person from a carrier likes the nexus phones. Why? Included tethering out of the box... The carriers don't like Google Voice, why? That one should be obvious, they want to serve you up visual voice mail for themselves (at a charge sometimes). Android includes navigation software like google maps, where as sprint, att, and VZW navigator are paid programs from the carriers with absolutely 0 relevance now that google maps is on phones.
My point is that I can bet it's not google, I can guarantee it's that carriers are scared ****less about the power android gives them and don't want to give google any breathing room. Sprint's in a bad position in America right now so they're giving in and seeing where it gets them.
@snowmanwithahat True! And that's also why at&t, t-mobile and verizon are joining forces to make their own mobile paymant system. But I think that google will win again .
superm1 said:
Ah, you're right. I didn't actually try to launch an application that required su, and now when I do I see that there are permissions problems. Fortunately the superuser apk is still there and generates a zip file to easily redo it it from recovery.
Click to expand...
Click to collapse
Hey, would you mind explaining exactly what you did to update to 2.3.7? Im running stock ROM.
snowmanwithahat said:
You think it's google's choice? I can almost guarantee it's a matter of the carriers not being willing to work with google to get things like full Google Voice integration working on their networks... Google wants their stuff EVERYWHERE, and it needs to be everywhere to succeed. It's the carriers that are afraid of google giving people power to do what they want. Not a single person from a carrier likes the nexus phones. Why? Included tethering out of the box... The carriers don't like Google Voice, why? That one should be obvious, they want to serve you up visual voice mail for themselves (at a charge sometimes). Android includes navigation software like google maps, where as sprint, att, and VZW navigator are paid programs from the carriers with absolutely 0 relevance now that google maps is on phones.
My point is that I can bet it's not google, I can guarantee it's that carriers are scared ****less about the power android gives them and don't want to give google any breathing room. Sprint's in a bad position in America right now so they're giving in and seeing where it gets them.
Click to expand...
Click to collapse
I agree with you in general.
Nevertheless, the problem is IMHO the US phone market.
Operators have unlimited power over your voice and data.
Also, the phone/operator coupling is like a cancer for consumers.
Google should stand its ground with the Nexus line. Nexus phones should be technology demo phones and development tools. Nothing less than that.
Doing nonsense stuff like killing the tethering feature on AT&T Nexus phones, or stopping the updates on the TMO phones is going to shoot back, soon or later.
They have to make a decision soon: The orientation of the Nexus line.
Technology show off and dev tools, or mass market products?
When they have an answer to that question, the Nexus line will start to make sense again.
Does anyone know how to update to 2.3.7 and keep all data/settings? I'm rooted on the stock ROM. Can I just do the OTA? Will I lose root? If I do lose root, will I have to wipe phone and reroot (one click method)?
Please help :/
Problem solved!
Simply follow the first post instructions:
* * * To update to 2.3.7 / GWK74 without losing root: * * *
Boot into ClockworkMod or twrp.
Flash this to get back to stock 2.3.5.
. . . (Or if you're already on it, just reflash the boot image.)
Flash the 2.3.7 update.
Flash superuser.
To keep recovery from being wiped, flash leave_the_twrp_alone.
If you're coming from a custom ROM, you might want to wipe dalvik and fix permissions.
Power OFF.
Power on.
Reinstall BusyBox.
Savdini said:
Does anyone know how to update to 2.3.7 and keep all data/settings? I'm rooted on the stock ROM. Can I just do the OTA? Will I lose root? If I do lose root, will I have to wipe phone and reroot (one click method)?
Please help :/
Click to expand...
Click to collapse
Did you read the first post in this thread before posting here? You can update without losing your root. Just read OP and follow instructions...
Tenhi said:
Did you read the first post in this thread before posting here? You can update without losing your root. Just read OP and follow instructions...
Click to expand...
Click to collapse
Yes, I just noticed the edit. I didnt want to reflash stock 2.3.5 and lose data since I was already on stock 2.3.5.
Thanks!
Worked like a charm
Thank you so much!
Was able to update but when flashing the SU.zip it aborts??? any help?
Hey guys,
I made one-click Odin package for myself, sharing with everyone here. I hope you guys will find it useful. It's a complete wipe and re-partition package.
It is Stock I897UCKI2 package with Boog's KI1/KI2 Kernel1 with CWM Recovery, no Bootloaders. You need to be on GB bootloaders to run this. This package can be used as Stock before flashing any i897 GB based ROM. If you are not running on AT&T GB bootloaders, please use the package listed in post#2.
Download Link 1 (Mediafire)
Download Link 2 (Multiupload)
Download it, extract it, run it as administrator.
DOWNLOAD INSTRUCTIONS: (from 4-2ndtwin's thread)
You must have the AT&T i897 Gingerbread Bootloaders. Gingerbread bootloaders are needed to run Gingerbread Roms. If you don't have them installed, you can use the package listed in second post.
-Download this Mod One Click Odin to your desktop.
-Be sure you have the Captivate drivers installed on your computer.
-Wipe data/factory reset. Wipe dalvik cache if you can.
-Right click and Run as admistrator the Odin.
-Remove your sim card and external sdcard from you phone.
-Put your phone into download mode.
-Connect micro usb end of cable to phone and usb end to the computer.
-Wait for Odin to recognize your device. Yellow com port will light up.
-Click the big Start Button.
-Sit back and watch. This should only take between 2 or 3 minutes to complete.
-When the process is finished and your phone begins to reboot and you see the at&t screen you may go ahead and unplug the micro usb from your phone.
Click to expand...
Click to collapse
Credits & Thanks -
Boog for his work on KI1/KI2 Kernel with CWM Recovery.
Przekret for providing latest I897 leaks - I897UCKI2.
4-2ndtwin for his support and help to me, making this One-click downloader. His One-click KH3 downloader inspired me to modify stock leak builds.
Watsa for his support and great work on Apex and Pinnacle ROMs.
Disclaimer: as usual, I am not responsible, if you brick your phone. The above file is tested on my own device.
This one exactly same as above but With AT&T GB Bootloaders. If you are not on AT&T GB Bootloaders, you can flash this version.
Download Link 1
Link 1
Ur amazing.
Downloading....
Enviado desde mi SAMSUNG-SGH-I897 usando XDA Premium App
great work bro... keep it up........
---------- Post added at 03:53 PM ---------- Previous post was at 03:48 PM ----------
is this stock Rooted and Deodexed?
Flashing ROMs is getting easier and easier.
Many Thanks!!
Nice work !
Thanks for sharing. This will be very useful indeed.
.
Link says dropbox account has been disabled Mirror anybody????
Anybody??????????
syanz87 said:
great work bro... keep it up........
---------- Post added at 03:53 PM ---------- Previous post was at 03:48 PM ----------
is this stock Rooted and Deodexed?
Click to expand...
Click to collapse
No it is not Rooted/deodexed.
I think there is some issue with download link. I will fix it an hour.
Sent from my SAMSUNG-SGH-I897 using XDA App
I come late to the party and you guys already destroyed the link
can you upload to multiupload instead of dropbox?
demarton said:
can you upload to multiupload instead of dropbox?
Click to expand...
Click to collapse
+1 or an additional mirror.
Anyone have these dl'd that they could re-host?
Thanks for the work on this One-Click!
orlandoxpolice said:
I come late to the party and you guys already destroyed the link
Click to expand...
Click to collapse
Link fixed. Party is back on!!
IlluminatedOne said:
No it is not Rooted/deodexed.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks for a one-click !!
Can you please inform when a rooted version will be up? Or is this going to be an urooted version?
chappatti said:
Thanks for a one-click !!
Can you please inform when a rooted version will be up? Or is this going to be an urooted version?
Click to expand...
Click to collapse
This ROM is not rooted, it is completely stock except Kernel.
There are two ways you can root this ROM.
1. Flash Fugu's Kernel. Phone will go in boot-loop. Remove battery, go in DL mode again. Flash Boog's Kernel.
2. If you want Root as well as Zipaligned, Deodexed KI2, you can flash Emuneee's CWM flashable ROM on top of it. You will need this ROM if you want further modifications like extended power menu etc.
IlluminatedOne said:
This ROM is not rooted, it is completely stock except Kernel.
There are two ways you can root this ROM.
1. Flash Fugu's Kernel. Phone will go in boot-loop. Remove battery, go in DL mode again. Flash Boog's Kernel.
2. If you want Root as well as Zipaligned, Deodexed KI2, you can flash Emuneee's CWM flashable ROM on top of it. You will need this ROM if you want further modifications like extended power menu etc.
Click to expand...
Click to collapse
Thanks.
I have tried emuneee's ROM.....no problems flashing, but some quirks with the release in this version (KI2) seems to be....Is that right?
Oneclick "stock" is always helpful and root or no root is good to know. No complaints on that point.
chappatti said:
Thanks.
I have tried emuneee's ROM.....no problems flashing, but some quirks with the release in this version (KI2) seems to be....Is that right?
Oneclick "stock" is always helpful and root or no root is good to know. No complaints on that point.
Click to expand...
Click to collapse
I didn't notice any so far. Have been on KI2 since it came out. Flashed emuneee's rooted/deodexed/zipaligned last night. It is also working fine so far.
Updated second post with link to another One-Click package with Bootloaders.
IlluminatedOne said:
This ROM is not rooted, it is completely stock except Kernel.
There are two ways you can root this ROM.
1. Flash Fugu's Kernel. Phone will go in boot-loop. Remove battery, go in DL mode again. Flash Boog's Kernel.
2. If you want Root as well as Zipaligned, Deodexed KI2, you can flash Emuneee's CWM flashable ROM on top of it. You will need this ROM if you want further modifications like extended power menu etc.
Click to expand...
Click to collapse
Hi, I tried the method one rooting. Everything works perfectly. Except the 3g.
3g sign does not show up. I am unable to connect to 3g network.
amchandr said:
Hi, I tried the method one rooting. Everything works perfectly. Except the 3g.
3g sign does not show up. I am unable to connect to 3g network.
Click to expand...
Click to collapse
Go to Settings/ Wireless and network/ Mobile networks/ Access point names/ menu, then choose "Reset to default". When the WAP and button show, tap the button, it will turn green and then u should be good.
Sent from i897ucki2
4-2ndtwin said:
Go to Settings/ Wireless and network/ Mobile networks/ Access point names/ menu, then choose "Reset to default". When the WAP and button show, tap the button, it will turn green and then u should be good.
Sent from i897ucki2
Click to expand...
Click to collapse
You are the champ.. thanks , it worked like a champ....
I did not know this....
Now it shows H+ (instead of 3g).. do I need to worry about it.. I heard it is equivalent to 3.5g. I have subscribed only to 3g service, will there be a bump in my bill?
I think Samsung / Verizon are definitely going to have the OTA ICS update released sometime before the end of the year I hope.
Maybe
Anyone out there with real info? ¿
Sent from my SCH-I815 using xda app-developers app
A question mark in the title would be have prevented you from cruelly getting my hopes up!
good point
tr2ride said:
I think.. definitely.. I hope.. Maybe
Click to expand...
Click to collapse
You seem confident. I'll say it's here by Q3 end; JB we shouldn't hold our breath for (officially).
I would actually be content with a custom rom based on the 3g Ics upgrade with no working 4g for the time being as I could just tether anyways
Sent from my SCH-I815 using xda premium
Any news on Verizon devices update on ICS?
A comment a few days ago from Verizon customer service stated they didn't even have a timeframe yet...
https://community.verizonwireless.com/thread/776946
Never again, Verizon!
Gilbot said:
I would actually be content with a custom rom based on the 3g Ics upgrade with no working 4g for the time being as I could just tether anyways
Sent from my SCH-I815 using xda premium
Click to expand...
Click to collapse
There's a CM9 for the i815 in the Android development thread that has everything working but 4G and auto brightness, according to the developer. I'm going to install this weekend, but it seems to be the real deal at this point.
It's also currently missing HDMI, which is unfortunate...but I agree that it could easily be a daily driver in another month or so.
Rodney
esoh said:
There's a CM9 for the i815 in the Android development thread that has everything working but 4G and auto brightness, according to the developer. I'm going to install this weekend, but it seems to be the real deal at this point.
Click to expand...
Click to collapse
I have installed the CM9 today and it works great!
:good:
esoh said:
There's a CM9 for the i815 in the Android development thread that has everything working but 4G and auto brightness, according to the developer. I'm going to install this weekend, but it seems to be the real deal at this point.
Click to expand...
Click to collapse
Yup. I'm rocking CM9 as my daily driver. Love it !
Sent from my SCH-I815 using xda premium
Gilbot said:
Yup. I'm rocking CM9 as my daily driver. Love it !
Sent from my SCH-I815 using xda premium
Click to expand...
Click to collapse
This is great news, sure I'd love 4g to be working too but I typically have at least 2 networks I can tether on in addition to Verizon so ready to take the plunge.
Which version of CWM are you running and how did you install it? Odin or heimdall? I downloaded what I thought was the proper CWM but have had trouble installing.
tr2ride said:
This is great news, sure I'd love 4g to be working too but I typically have at least 2 networks I can tether on in addition to Verizon so ready to take the plunge.
Which version of CWM are you running and how did you install it? Odin or heimdall? I downloaded what I thought was the proper CWM but have had trouble installing.
Click to expand...
Click to collapse
CWM 5.5.0.4 recovery from locerra, flashed via Odin.
Do yourself a favor before flashing the recovery via odin if you're rooted and follow these instructions, or else the stock recovery will override your CWM recovery every boot:
ODIN flashable CWM 5.5.0.4 TAR file: http://goo.im/devs/ohanar/clockworkmod/i815/CWM-20120710-i815.tar
Installation Instructions for stock FD01 users with stock 3e recovery:
Gain root access if you don't already have it.
Disable any lockscreen security you have.
While in the Stock ROM after enabling root access, navigate to the /system folder with a root-enabled file explorer app and mount R/W.
Locate the file "recovery-from.boot.p" and rename it to "recovery-from.boot.p.bak" then power down your tab, Do Not reboot or let the tab boot into your stock rom!
Boot into download mode by pressing and holding power + volume down
Press Volume up to continue into download mode and connect your tab to your pc
Load up ODIN and flash the 5.5.4.0 tar file via PDA
Reboot, you should now have persistent CWM 5.5.0.4
Did my nandroid fail?
What is the size of your nandroid backups?
I'm concerned mine is too small to be correct.
When I backed up there were no errors but still seems small.
The entire backup directory in clockworkmod/backups/<backupname> is only 21.5 MB
tr2ride said:
What is the size of your nandroid backups?
I'm concerned mine is too small to be correct.
When I backed up there were no errors but still seems small.
The entire backup directory in clockworkmod/backups/<backupname> is only 21.5 MB
Click to expand...
Click to collapse
Here's a pic of my backup directory, it looks like data and system are jacked
Are there any other mechanisms for backup other than nandroid? since its impossible to revert the i815 without a backup I'm being extra paranoid
thanks
tr2ride said:
Here's a pic of my backup directory, it looks like data and system are jacked
Are there any other mechanisms for backup other than nandroid? since its impossible to revert the i815 without a backup I'm being extra paranoid
thanks
Click to expand...
Click to collapse
That's wayy too small of a nandroid. I have two over 1gb and one thats over 350m. Which version of CWM did you install?
Is this ever going to happen? Anyone hear anything from VZ?
tr2ride said:
Is this ever going to happen? Anyone hear anything from VZ?
Click to expand...
Click to collapse
The silence from Verizon is deafening. If CM10 had 4G support I'd be running it but since I use my 4G a lot I'm stuck running honeycomb.
mgleed said:
The silence from Verizon is deafening. If CM10 had 4G support I'd be running it but since I use my 4G a lot I'm stuck running honeycomb.
Click to expand...
Click to collapse
Same here.....sadly
Sent from the Delta Quadrant using XDA Premium
I'm running CM10 and it is very smooth and a huge step up from stock HC. I use mine solely on Wi-Fi so it having 4G issues is not a problem for me. VZW's attitude toward customers and their painfully slow updating process is what drove me away from them. I will never go back to VZW until these attitudes change. I am now a very happy T-Mobile customer with unlimited 4G data. Suck it VZW.
Well after all these yrs im back to my ole trusty vibrant.
Broke my S2 yesterday with no insurance :-/
So here I am and don't really recall all the procedures....but im getting there slowly.
Currently im still running team whiskeys bionix v 1.3.1 from back in the day.
Any tips and tweeks would be appreciated
Or don't....don't plan on using this dinosaur for long
Shortbus-Driver said:
Or don't....don't plan on using this dinosaur for long
Click to expand...
Click to collapse
This "dinosaur" can run Jelly Bean 4.2 in case you didn't know, plenty of custom ROMS in the development section. If your staying on 2.2 then there are really no "tips and tricks", as those ROMs are very stable. The basic steps for flashing a ROM with this phone in recovery mode are as follows : format system, data and cache under "mounts are storage"(this is optional but recommended for a clean install). The next steps are necessary everytime you install a ROM unless told otherwise by the developer : wipe data/factory reset, wipe cache, wipe dalvik cache (under advanced) then install your ROM, now go back to the advanced section and fix permissions, now reboot and wait ten minutes. Note, if your going to flash from 2.2 to jelly bean then you will have to flash the ROM twice, the first flash just updates your recovery mode.
Sent from my SGH-T959 using Tapatalk 2
Thanks I wouldn't have known to flash twice on the jb ...I woulda just flashed back to stock and gone from there.
Also if im correct back when this phone was the phone to have ....flashing anything over gb meant loss of gps,wifi, along with other issues....does thus still hold true today?
Shortbus-Driver said:
Thanks I wouldn't have known to flash twice on the jb ...I woulda just flashed back to stock and gone from there.
Also if im correct back when this phone was the phone to have ....flashing anything over gb meant loss of gps,wifi, along with other issues....does thus still hold true today?
Click to expand...
Click to collapse
Gps is always iffy for the vibrant, but we are fine for the rest. :thumbup:
Nexus⁴ PAC 360° Productions
Shortbus-Водитель said:
Или не....не планируете использовать этот динозавр надолго
Click to expand...
Click to collapse
Phone is quite good, much better than the new HTC Desire Triple with an easy-beating screen! I ran it by Sadanand 4.3.1, works perfectly!
I'm sorry for having to post here, I'm a new XDA member and I've just started using my tablet and found out I can't post in the dev section. I'm not sure how else to get help and a previous boyfriend told me the xda-developers community was a great place so I thought I would try here.
I have the Nexus 7 (2013 edition) and I used WUG's method of rooting - everything went perfectly, but now I'm getting a notification that there is an update (an OTA update - I think that's what they are called?) and it doesn't apply. I'm not sure if I should have, but I did the bootloader unlock and installed a new recovery (TWRP - I think that's how it's spelled?. sorry again)...
Anyway.... At this point my tablet is working great, but I constantly see this notification for an update and I'm not sure what to do.. It says "touch to install" and I've done that but it just boots into my new recovery. If anybody has access to WUG in the dev forum, could you please ask him what I should do?
Thanks!!!!!!!!!!!!!!
BarbaraG said:
I'm sorry for having to post here, I'm a new XDA member and I've just started using my tablet and found out I can't post in the dev section. I'm not sure how else to get help and a previous boyfriend told me the xda-developers community was a great place so I thought I would try here.
I have the Nexus 7 (2013 edition) and I used WUG's method of rooting - everything went perfectly, but now I'm getting a notification that there is an update (an OTA update - I think that's what they are called?) and it doesn't apply. I'm not sure if I should have, but I did the bootloader unlock and installed a new recovery (TWRP - I think that's how it's spelled?. sorry again)...
Anyway.... At this point my tablet is working great, but I constantly see this notification for an update and I'm not sure what to do.. It says "touch to install" and I've done that but it just boots into my new recovery. If anybody has access to WUG in the dev forum, could you please ask him what I should do?
Thanks!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Do you have the WiFi only version or the LTE version? Also, under your settings -> about phone, what build number are you currently on? Since you have rooted and installed a custom recovery, OTA updates will not install correctly. You have a couple of options in this regards, and I or someone will go over them once we figure out what version you are running.
railed said:
Do you have the WiFi only version or the LTE version? Also, under your settings -> about phone, what build number are you currently on? Since you have rooted and installed a custom recovery, OTA updates will not install correctly. You have a couple of options in this regards, and I or someone will go over them once we figure out what version you are running.
Click to expand...
Click to collapse
ThankYou so much for the help... It's the WiFi only version. The build number is: JSS15J
http://forum.xda-developers.com/showthread.php?t=2404833
BarbaraG said:
ThankYou so much for the help... It's the WiFi only version. The build number is: JSS15J
Click to expand...
Click to collapse
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.
railed said:
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.
Click to expand...
Click to collapse
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.
BarbaraG said:
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.
Click to expand...
Click to collapse
All your data will be preserved. Only Wipe the Cache/Dalvik Cache, not the Data. Before you install go to Wipe -> Advance -> Check only Cache and Dalvik Cache.
Typically when an update comes out, someone will post a flashable update within a couple of hours so we can install them as well. Hope it helps.
Edit: As always before flashing anything, make a backup, by rebooting into recovery and selecting Backup (i check all the boxes).
BarbaraG said:
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.
Click to expand...
Click to collapse
Also.... If I just load the latest cyanogenmod on it, will that take care of it. I have the same old phone from my previous boyfriend and it's running cyanogenmod.. It will update the OS whenever a new version comes out and I don't lose the data like I did with the unlock bootloader thing?
BarbaraG said:
Also.... If I just load the latest cyanogenmod on it, will that take care of it. I have the same old phone from my previous boyfriend and it's running cyanogenmod.. It will update the OS whenever a new version comes out and I don't lose the data like I did with the unlock bootloader thing?
Click to expand...
Click to collapse
I believe so, Cyanogenmod usually merges the updates pretty quickly into the code and you won't get any update notifications from Google directly any more. There are only nightly releases so far for this device if you feel like going that route.
railed said:
I believe so, Cyanogenmod usually merges the updates pretty quickly into the code and you won't get any update notifications from Google directly any more. There are only nightly releases so far for this device if you feel like going that route.
Click to expand...
Click to collapse
Thank You! Very Much!!!
Do you think I should go the cyanogenmod route?
I've really liked cyanogenmod on the phone on barnes&noble device they are on, but I've been scared to update this tablet since we've broken up and I don't have anybody that can help.
BarbaraG said:
Thank You! Very Much!!!
Do you think I should go the cyanogenmod route?
I've really liked cyanogenmod on the phone on barnes&noble device they are on, but I've been scared to update this tablet since we've broken up and I don't have anybody that can help.
Click to expand...
Click to collapse
That's completely up to you and what you prefer... I like the stock android experience so far, but there are many options out there for custom ROMs besides CM. Take a look here and here and figure out if a ROM in there has something you want... the great thing about this is if you don't like it, flash something else until you find exactly what you like... that's how I plan to do it, once the ROMs get more stable with the 4.3 updates.
railed said:
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.
Click to expand...
Click to collapse
I've been reading through all of the links you sent and some others I've found. Should I go with the odexed or deodexed version?
BarbaraG said:
I've been reading through all of the links you sent and some others I've found. Should I go with the odexed or deodexed version?
Click to expand...
Click to collapse
I use deodexed, as do a lot of people who like to customize. There's not a lot of difference between the two. Here is an article that explains it pretty well: Odexed vs Deodexed
railed said:
I use deodexed, as do a lot of people who like to customize. There's not a lot of difference between the two. Here is an article that explains it pretty well: Odexed vs Deodexed
Click to expand...
Click to collapse
Thank You, I now know the difference between them. I think I'll go with the Deodexed version also.
Thanks again for all of your help!!!!!