Related
HAPPY NEW YEAR TO ALL!!!
THIS Build has CIFFS, PPTP, VPN, MPPE, PPOE, Proxy Support, EXT4 Support, NTFS Support, Joystick/GamePad support. 3g Modem is also enabled in this kernel
The kernel will now work with Zpad ROM, TNT ROM and VEGAN ROM. WIFI fix is now included with the kernel
Thanks rothnic for guiding me with CIFFS
Thanks to pershoot and other devs..
Sleep fix and HDMI has integrated CIFFS, PPTP, VPN, MPPE, PPOE, Proxy, EXT4, NTFS, Joystick/Gamepad etc....SD-ext is fixed
------------------------------------------------------------------
UPDATE:
New kernel up with ThumbEE support, update to 10.9.9 and few minor tweaks in kernel. Please test, only for FROYO at the moment Also, please clear Dalvik-cache after installing kernel.
Kernel now dated to determine the latest (3/20/11). Latest kernel has all with more permanent sleepfix, thumbee, watchdog...etc..
Froyo version 5 kernel and Gingerbread beta 2 (Vegan gingerbread) up.
Version 6 up
Version 7 is up. I RECOMMEND YOU STAY IN VERSION 6 if it is stable. I have no Gtab to test version 7 but it works with my testers. In my opinion, version 7 has better sleep support than 6 but according to a few testers, it's a bit slower.
Version 8 is up. Bluetooth bug is fixed. Workaround for sleep built in the kernel.
Version 9 is up with better Bluetooth support and better sleep fix
Update on Version 9:
Tested with an Ubuntu laptop bluetooth and was able to receive and send a 30mb file with a transfer rate of 60-80 kb/sec
-----------------------------------------------------
-----------------------------------------------------
UPDATE: VERSION 10 is up..There are three types with different voltages settings.
Clemsyn1.5Froyoextra - 750 mv - 1250 mv
Clemsyn1.5FoyoMed - 750mv - 1200 mv
Clemsyn1.5FroyUV - 700mv - 1175 mv
I myself prefer Clemsyn1.5FryoUV for battery life but it might not work for you tegra. Just try Med and if it still don't work, try extra.
Please don't forget to wipe the Dalvik-cache then wipe the cache partition after installing kernel. Thanks!
Gingerbread version is up!
Uploaded second version of Froyo 1.5ghz with better voltage support (I think )
UPDATE: 4/22/11
Updated Overclocking code using CPajuste's.
UPDATE: 4/25
Got PimpMyCPU working by working on his APK BTW, this is pretty good
\
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
UPDATE:
******** PIMPMYGTAB AND KERNEL ON SECOND POST **********************
PIMPMYGTAB VOLTAGE CONTROL and Clemsyn Kernel Version 11
This is my latest kernel with Updated Frequency table for 1.5 ghz to support PimpMyGtab.apk
Additions are Advance Net Config
Incorporated pershoot's latest wifi drivers...Thanks Pershoot
The voltages in each frequency are the max that I will release for 1.5 ghz. Please use PimpMyGtab to undervolt it as much as your Gtab could
1500000 - 1300mv
1200000 - 1200mv
1000000 - 1100mv
912000 - 1000mv
608000 - 900mv
4560000 - 825mv
2160000 - 750mv
Remember if UV used to work for you Underclock to 1175-1200 at 1500000
If Medium Used to workk for you Underclock to 1200-1250 at 1500000
If Max Used to work for you Underclock to 1250-1300 at 1500000
Note: If you make changes to the voltage, make sure you don't go over 100mv limit by Nvidia
Eg. 1200mv - 1300mv (100mv)
You can go less but not over (actually you can go over but lets just keep it within limits )
Here is the link for instruction on how to use PimpMyGtab
http://forum.xda-developers.com/showthread.php?t=1018411
** If you get a scaling_governor error when starting PimpmyGtab...You just have to set the scaling governor by typing echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor or by installing CPU Master and choosing Powersave in Governor
BTW, if you like my work, please dont hesitate to buy me a BEER
Also if you like PimpMyGtab...Make sure you purchase PimpMyCPU (This is the source) by CPasjuste. BIG THANKS TO Cpasjuste.
-----------------------------------------------------------
-----------------------------------------------------------
UPDATE 4/27/11
System/AVP no Oc'd to 266400
GPU now overclocked to 425000
1.5ver11avpsystemOCFROYO(Gingeer).zip
When installing a new kernel, make sure you uninstall PimpMyCPU the reinstall to allow it to read the current kernel settings
If you like my work, pls buy me a beer or maybe a whiskey
5/1/11
Due to PM requests...I'm releasing 1.6 and 1.7 kernel..Please be advised that voltage settings and speeds are above nvidia recommended settings.
IF you are using 1.6ghz and 1.7ghz with my combo or Calkulin's ROM...you need to edit /system/etc/init.d/01cpufreq_screenstate_scaling to use 1700000 or 1600000 speed. All these kernels are compatible with PimpMyGtab. Make sure you uninstall PimpMyGtab and install the kernel, then reinstall PimpMyGtab and tweak it accordingly, also make sure you save the current settings as boot.
Thanks, could you help provide a change log?
From v10.9.2 kernel
$uname -a
Linux localhost 2.6.32.9-dirty #10 SMP PREEMPT Sat Jan 1 14:30:07 CST 2011 armv7l GNU/Linux
Getting 2200-2400 Quadrant scores on 10.9.2. So far no issues. Had to reinstall Flash.
lamlam01 said:
Thanks, could you help provide a change log?
Click to expand...
Click to collapse
here is the change log up to 10.9.2
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/tags/tegra-10.9.2
IPv6 is not included coz it breaks our wifi (needs a ROM with new modules to make it compatible with the kernel)
tegra bluetooth sleep not added (coz I dont use it)
HDMI not added (dont use it to)
Viewsonic's kernel was only up 10.8.2 so I put the changes to bump us up to 10.9.2. Working on 10.9.3. Once I get 10.9.3 running, I will release it for Vegan and TNT.
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
clemsyn said:
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
Click to expand...
Click to collapse
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
clemsyn said:
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
Click to expand...
Click to collapse
Thanks for the hardwork! Will these kernels apply to the latest TNTLite (3.1.4) and Vegan (Beta5) releases?
bittrix said:
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
Click to expand...
Click to collapse
CIFS/SMB support is not yet enabled. Would like to try to finish this 10.9.3 or maybe up to 10.9.7. Regarding the external USB port, I will have to look into that.
Building 10.9.3 at the moment and will call it quits after this. Kids will start waking up soon
samepic said:
Thanks for the hardwork! Will these kernels apply to the latest TNTLite (3.1.4) and Vegan (Beta5) releases?
Click to expand...
Click to collapse
Only Vegan at the moment. When I get 10.9.3 going, I'll make one for TNT (that is if the kids are still napping)
Update:
Just encountered another bug..Will have to figure out what's causing this before I can continue If I can get over this bug, I think we can jump to 10.9.7.
Update:
OK got it! Will post 10.9.3 and make one for TNT
UPDATE 10.9.3 is up...
Great work! Any chance the tunneling protocol is included in these newer kernels? I would love to be able to use VPN from the GTablet.
bittrix said:
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
Click to expand...
Click to collapse
I have compiled a kernel that enabled serial USB for you with 10.9.3. PM me on what build you are currently using.
clemsyn said:
I have compiled a kernel that enabled serial USB for you with 10.9.3. PM me on what build you are currently using.
Click to expand...
Click to collapse
Unbelievably cool! Thank you. I appreciate it. PM sent.
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
clemsyn said:
Only Vegan at the moment. When I get 10.9.3 going, I'll make one for TNT (that is if the kids are still napping)
Update:
Just encountered another bug..Will have to figure out what's causing this before I can continue If I can get over this bug, I think we can jump to 10.9.7.
Update:
OK got it! Will post 10.9.3 and make one for TNT
UPDATE 10.9.3 is up...
Click to expand...
Click to collapse
Thanks. Just installed it on my Gtab running Vegan Beta5. So far the following are working fine:
Bluetooth
WiFi using WPA PSK
WiFi using ad-hoc mode
External USB Connection to Flash Drive
Sound, SCARD2 work
Will let you know if I run into any issues.
Thanks!
rothnic said:
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
Click to expand...
Click to collapse
After running/using beta vegan 5.1 with cifs support, itbis going to be very difficult to go back. I am sorry.
Sent from my PC36100 using XDA App
bittrix said:
Unbelievably cool! Thank you. I appreciate it. PM sent.
Click to expand...
Click to collapse
Try this and let me know how it goes
I assume its a CP210x family so I build a module for it.
rothnic said:
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
Click to expand...
Click to collapse
Building CIFS support won't be an issue. I honestly don't use it so I am not familiar with it. I see options to enable CIFS and a few more options related to CIFS. If you can PM me on what options to enable to get it going I would greatly appreciate it.
clemsyn said:
Try this and let me know how it goes
I assume its a CP210x family so I build a module for it.
Click to expand...
Click to collapse
It's a GR213u... trying to connect now... (typing this using your holux 9.3 build)
bittrix said:
It's a GR213u... trying to connect now... (typing this using your holux 9.3 build)
Click to expand...
Click to collapse
Let me know how it goes
can the tnt version be used on stock 3389 with enhancement pack v3 applied?
thanks
I was wondering, whats the fastest rom without sense that is able to properly connect to AD-hoc hotspots created by Connectify/Windows 7 hotspot creator?
CM7 worked great, but the latest nightlies are unstable, so I flashed imPROS and its great, but the wifi doesn't work there .
D3VICE said:
I was wondering, whats the fastest rom without sense that is able to properly connect to AD-hoc hotspots created by Connectify/Windows 7 hotspot creator?
CM7 worked great, but the latest nightlies are unstable, so I flashed imPROS and its great, but the wifi doesn't work there .
Click to expand...
Click to collapse
have you got the right kernal and radio for imPROS? I know some ROMS need different ones, have a look on the wildpuzzle thread for some and descriptions of them.
djdevine2 said:
have you got the right kernal and radio for imPROS? I know some ROMS need different ones, have a look on the wildpuzzle thread for some and descriptions of them.
Click to expand...
Click to collapse
Thanks, kernels are flashable too?
Also, what kernel should I flash :S?
There are 3 >_>.
How do I know which one is from CM7?
jacobs overclock one should do
Thank you, I'll try it.
D3VICE said:
I was wondering, whats the fastest rom without sense that is able to properly connect to AD-hoc hotspots created by Connectify/Windows 7 hotspot creator?
CM7 worked great, but the latest nightlies are unstable, so I flashed imPROS and its great, but the wifi doesn't work there .
Click to expand...
Click to collapse
I would highly recommend trying nightly #13
Yeah, #13 is better.
xD.
Try My ROM
Moved to general
jjblaster3 said:
Moved to general
Click to expand...
Click to collapse
I love having an active mod here! Thank you
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
base on huawei Honor android 4.0 ROM，use .35 kernel , default 1Ghz cpu freq
Working:
3G
Calling
MMS
Signal Strength
All sensors
Headphones
Virtual keys
LED
Screenshots
Sound/Sound Record
Video
TouchScreen
Multitouch
Hardware Accelaration
SDcard/USB
Not Working:
ROOT
Camera
Gapps
WIFI
USB Tethering
Bluetooth
Camera
FM
TV-out
support u8800pro and u8800，you should upgrade to offical android 2.3，if not the usb、RIL will not work.
if you upgrade to offical android 2.3 ，recovery you could use this one（u8800 & u8800pro）：
http://forum.xda-developers.com/showthread.php?t=1343276
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Geno, is not possibke to do something more with our normal u8800.
Sent from my u8800 using XDA App
Nice! Looking forward for more!
nice work.
Which kernel did you use?
Nice Effort Thanks
awesomee great work. now just fix camera& wifi and i will be using it for everyday use
You shouldn't have bricked your Ideos x5 u8800...
So... This works with u8800 AND pro?
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Click to expand...
Click to collapse
And to run this i have to upgrade to 2.3 to get usb and rils working?
I have u8800.
genokolar said:
base on huawei Honor android 4.0 ROM
Worked： RIL、audio、video、USB、3D、sensors
not work：WIFI、Bluetooth、Camera、FM、TV-out
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Click to expand...
Click to collapse
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
brdnacer said:
what about u8800? when is ics for u8800 coming? any work already?
Click to expand...
Click to collapse
u8800 can use this one too
genokolar said:
u8800 can use this one too
Click to expand...
Click to collapse
Sir what CWM we should use for U8800 with upgraded to GB???
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
u8800 should upgrade to 2.3
i writed
yes, both
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
u8800 can use this one too
Click to expand...
Click to collapse
K. ty.
Geno was faster
julle131 said:
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
K. ty.
Geno was faster
Click to expand...
Click to collapse
Did you flash GB before you flash this ROM
krish_nank said:
Did you flash GB before you flash this ROM
Click to expand...
Click to collapse
As i wrote, no i didn't.
So this is going to have what kernel
Sent from my u8800 using XDA App
Geno, How is your u8800 doing?Have you taken it to warranty yet? I hope you can get camera and wifi working. Then I consider the rom ready for everyday use.
my opinion
Tested it and i must say i was not impressed at all.If this is what ICS has to offer i must say i am disappointed.So i cant understand why all the fuss about it.i guess the final version will impress me.
sweet. It's working here on U8800. it's smooth enough for first release great work. thanks
Just so you know, Camera is listed twice in the Not Working section in the forst post
currently i am using HD2 Nexus Gingerbread V2.3 by tytung.. He is simply awesome... This ROM is Flawless, Superfast, Clean And Fully Functional.. I just wanted to know wether HD2 Nexus ICS CM9 HWA is also the same..?? Fast, Clean and Fully Functional..??
please reply.... should i install this ROM..??
mayank_bpkihs said:
currently i am using HD2 Nexus Gingerbread V2.3 by tytung.. He is simply awesome... This ROM is Flawless, Superfast, Clean And Fully Functional.. I just wanted to know wether HD2 Nexus ICS CM9 HWA is also the same..?? Fast, Clean and Fully Functional..??
please reply.... should i install this ROM..??
Click to expand...
Click to collapse
yes you should
ive been using the 2.4 version of his ics rom and have had no problems with it
and it is fast
Kameirus said:
yes you should
ive been using the 2.4 version of his ics rom and have had no problems with it
and it is fast
Click to expand...
Click to collapse
I’m using this version to but with a boring problem, in outgoing calls the speaker phone starts always at max (in incoming calls sound is ok).
could you confirme that you don’t have this problem?
nº1 said:
I’m using this version to but with a boring problem, in outgoing calls the speaker phone starts always at max (in incoming calls sound is ok).
could you confirme that you don’t have this problem?
Click to expand...
Click to collapse
i dont have that problem ,and ive made many outgoing calls since installing 2.4
so guys, are all functions r doing gr8 or is any phn function not working...? if there is any prob i can wait for nxt update frm tytung.
as reported, there are user that don’t have major problems and others with some mysterious bugs, so maybe the best is that you try it and tell us what you think
Meanwhile if you found solution to my problem please report here
http://forum.xda-developers.com/showthread.php?t=1727578
:good:
GOOD ONE ICS 4.0.4 CM9 By Tytung
For New User, who have windows in their HD2 here is a link for video showing step by step "How To Install ICS 4.0.4 CM9"
http://www.youtube.com/watch?v=ItDPY-jGJjM
For User Either Running Gingerbread/ ICS previous ROM's they have to just upgrade their Clockmod Recovery to 5.0.2.6. and then run MAGDLR and first wipe ur phone and follow the instruction how to install ICS from SD folder.
For All: i have installed tytung's latest ICS, link is
http://forum.xda-developers.com/showthread.php?t=1437463
its working gr8, all features are working, no prob at all. only one drawback is, its minutely slow, but tat will not effect in any sense.
so njoy !!!!!!!!!!! all softwares needed for 1st install are available from tytung's link..
just try it, it's smooth and stable maybe not as stable as gb build is, but enough for me, for daily driver
Sent from my NexusHD2 using XDA
laehtis said:
just try it, it's smooth and stable maybe not as stable as gb build is, but enough for me, for daily driver
Sent from my NexusHD2 using XDA
Click to expand...
Click to collapse
definitely true! backup your current ROM/Data and just try it, you wont be disappointed, buh if you don't like it you can always restore your nandroid backup;D
Sent from space..
I have not yet had a single stability issue with NexusHD2-ICS 2.4 since the day it was released. The only gripe I have is Netflix doesn't work, and some flash videos won't cooperate due to the hacked HWA.
Kameirus said:
yes you should
ive been using the 2.4 version of his ics rom and have had no problems with it
and it is fast
Click to expand...
Click to collapse
+1
wearefree said:
I have not yet had a single stability issue with NexusHD2-ICS 2.4 since the day it was released. The only gripe I have is Netflix doesn't work, and some flash videos won't cooperate due to the hacked HWA.
Click to expand...
Click to collapse
+1.
This is Netflix fault. Not the rom. Once it's fixed I'm going to jump on board.
Sent from my HTC HD2 using Tapatalk 2