Database Users

Black screen and no boot after flashing cyanogen mod 7.1

Hello guys !
I have a problem, i have an european (french) motorola milestone 2, i have this stock firmware "MILS2_U6_4.1-22" and i have rooted the phone with DoomLorD and i have install droidbootstrap, go into recovery of the droidbootstrap, flashed bootmenu 0.86, go into custom recovery with bootmenu, flash cyanogen mod (http://forum.xda-developers.com/showthread.php?t=1239778), did a wipe data and cache, reboot the phone, have picture (rayman's rabbit and blue logo motorola) and have black screen after this picture, can't go in boot menu (haven't got a blue led). Somebody can help me ?
PS : Sorry for my english.

Hold camera+vol down to boot into bootloader and then flash stock SBF (http://and-developers.com/sbf:milestone2) via RSDLite.

I have already done, so i can't put cyanogen 7.1 v1.3 in my phone ? May be it's the bootmenu ? I set i to default boot to normal, help me please.

It should be set to boot via 2nd-init. You need to flash fixed-sbf from the CM7 post. There should be a link for that in the same post or thread.
edit: I am guessing you are on Official GB.
Sent from my MotoA953 using XDA App

Yes i'm on official gingerbread, it's a problem ?
I have tried to put the default boot on 2nd-init and i have no boot already (black screen after the rabbit and motorola logo)
What can i do ??

Flash fixed-sbf using RSDLite. That's the complete install process for GB CM7 on GB kernel.
After applying the zip file you have to apply fixed-sbf from Endless7's CM7 thread. And if it does not boot after that try a data wipe.
Sent from my MotoA953 using XDA App

Thank's a lot, i have not flashed the fixed sbf after flashing the zip file (cyanogen), after flashed the fixed sbf the phone reboot corectly, thank's !

[Q] help! umts_jordan nightly to ms2ginger 2.1

hello,
is it possible to switch from cm7.1-nightly to ms2ginger easily?
(cm7.1 is android v. 2.3.7 with kernel 2.32.9)
regards

Yes you can do that easily. The ms2Ginger thread has enough information on how to do that. I have switched twice from Cm7 to ms2g and vice versa.
In a nut shell just restore the manseoid back up of ms2g system, data, boot , dev tree and recovery. Before you do this just take nandroid backup of your current cm 7, which can be useful to switch back at later time if needed.
Sent from my MB526 using XDA App

ok. after installing ms2ginger it seem to be not my flavour.
i tryed to install cm72 (120131.05331-nightly) by epsylon. now, the device boots up, lights blue and green up and nothing more happens..
what can i do? (got backup but want a fresh install)
regards

now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?

_xo said:
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
Click to expand...
Click to collapse
CM7.2 is for Defy+ which uses GB kernel.
You can either flash CM7 kernel if it works, otherwise go to advance restore and restore boot and devtree from MS2 nandroid.

hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help

coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
Are you installing MS2G 2.1? and Did you follow the complete restore of nandroid backup, - system, data, boot, devtree and recovery?

yup i did twice.

coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
I am searching for the instructions too:
http://forum.xda-developers.com/showthread.php?t=1468867&page=2
Will work the ms2ginger with cg version 6?
Anyone?

I had managed to get working, with instruction in the ms2ginger topic
To begin:
Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
REBOOT
run 2nd-init (voldown on blue LED)
wipe data and cache in "Stable/Custom - Recovery"
Go to "Recovery"
Go to "Latest Recovery"
Go to "Backup and Restore"
Go to "Restore" (system+data)
reboot.
Booting up can take a while, max is about 10 minutes.
THEN(if you want to try also the 3.0)
wipe data/cache/dalvik; Do an advanced recovery and only restore system and data from 3.0NG.

[Q] defy+ stuck on boot logo

Hi, i have defy+ (mb526)
android version: 2.3.7
kernell: 2.6.32.9-gb08c3c8
cyanogenMod-7.1..0-jordan
Gingerbread GWK74
I want to flash CM 7.2 (http://forum.xda-developers.com/showthread.php?t=1445259) but after flash rom, I stuck on boot logo, i wait 30minut, reboot, wait, reboot... but without succes.

You must delete the user data of your previous rom first. Go to CWM Recovery and choose 'wipe data/factory reset'. This will remove all your user data (apps, app data, settings etc.) so you should have a backup if you want to keep the data!

i try this, but without succes. I'am still on boot logo (google) :-(

Dobre den,
There is something wrong in your phone setting : the kernel you mention in your first post (2.6.32.9-gb08c3c8) is a Froyo kernel and your phone (MB526) has a GB bootloader who only accept GB kernel...
So I think the best for you is to flash a full GB SBF via RSDLite before flashing the CM 7.2 Defy+.
Nashle...;-)

This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.

mankymoo said:
This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.
Click to expand...
Click to collapse
Your phone is a Defy or a Defy+ ? because I'm not sure you help a lot with this kind of answers.

Thanx, after flash ful SBF GB via RSDlite, everything is OK

I have q defy, however the filestructure is almost exactly the same and a fresh install of anything is the key (usually) to fix any problem... therefore I tend to ask them to do that before anything else
Sent from my MB525 using XDA App

stuck on bootlogo
i have defy+ (stock 2.3.6 - 4.5.1-134_DFP-1321)
rooted & flashed Quarx's 3 Mach ICS CM9 nightly..
i tried to update that but i guess i flashed some wrong zip in recovery & phone showed some bootloader error..
so i flashed full sbf via RSDlite to return to my stock rom..after flashing is complete, rsdlite reboots my phone, phone is stuck on motorola bootlogo & rsdlite shows "please manually powerup this phone"..still connected to usb..even when i disconnect phone from usb, phone keeps rebooting & stuck on bootlogo..

update
clearing data/cache in stock recovery solved the problem..back on CM9

CM9 Stuck on boot screen :(

Hello...
i installed Cm9 followed the exact procedures give in http://www.youtube.com/watch?annota...&feature=iv&src_vid=5YJDcHjESKk&v=3v9OQY7yz7U
but now i am stuck at the CM9 boot screen.. i have an infinite boot...
i didnt take a nandroid backup...
i have the sbf files n rds lite, but it wouldnt let me go into it.. cm9 starts immediately after i plugin usb...
i tried re-flasing it.. no use.. please help...

Wipe data/factory reset.. and wipe cache partition..
after flashing the custom rom . . . . !

If wipe data/cache doesn't work.go to bootmenu and boot options.if adb is disabled...enable it.worked for me TODAY...after updating to a newer build it happened.
Sent from my MB526 using XDA

i cleared cache,dalvik,data.. n i also enabled adb.. no use.. can i load a nandroid i dowloaded from the net.. ? would it work?

what's your phone defy or defy+, green or red lens, which build did you instal?

i have Defy, green lens, i installed CM9 nightly [CM9-NIGHTLY-120416-Defy]
used CM7 kernel n gapps...
any help would be appreciated... thanks in advance...

Try the whole procedure once again:
Get latest build (Epsylon's for example): http://defy.wdscript.fr/defy-cm9/CM9-NIGHTLY-120428-Defy.zip
Kernel: http://m.cfa.aero/misc/CM7_Kernel-signed.zip
Gapps: http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
Place them on sdcard, go to stable recovery and do as following:
- wipe data/factory reset
- install zip from sdcard: ROM > KERNEL > GAPPS
- wipe cache partition, advanced > wipe dalvik cache then reboot
First boot can take a while. Good luck!

I switched on the defy holding powerup n entered SW update mode...
used rds lite n installed sbf.. my defy is back again..
i will try installing CM9 again now.. thanks All for ur timely support...

[email protected] said:
I switched on the defy holding powerup n entered SW update mode...
used rds lite n installed sbf.. my defy is back again..
i will try installing CM9 again now.. thanks All for ur timely support...
Click to expand...
Click to collapse
See this link it might help you: http://forum.xda-developers.com/showthread.php?t=1618904

[email protected] said:
Hello...
i installed Cm9 followed the exact procedures give in http://www.youtube.com/watch?annota...&feature=iv&src_vid=5YJDcHjESKk&v=3v9OQY7yz7U
but now i am stuck at the CM9 boot screen.. i have an infinite boot...
i didnt take a nandroid backup...
i have the sbf files n rds lite, but it wouldnt let me go into it.. cm9 starts immediately after i plugin usb...
i tried re-flasing it.. no use.. please help...
Click to expand...
Click to collapse
May be this post will help you...
Link

[Q] screen is blank defy plus

GUYS i am stuck in a Big problem.......
i actually wanted to change my ROM from Quarx Nightly Builds(jb) to WIUI (jb) according to the instructions in http://forum.xda-developers.com/showthread.php?t=1161110 i installed 2ndinit 1.4.2 and went to bootmenu and kept the default to 2ndint and after that when i went to recovery 2 options were their 1)stock recovery and 2) (forgot name) recovery so i went to stock memoery to wipe cache /data but i found nothing so i rebooted but from here trouble started it stuck at motorola ICON and dont start i asked 1 of my group mate about this he told me to flash my phone with SBF file so i flashed it sum SBF file later found that its SBF file of DEFY not DEFY + and now the phone does'nt even start only blank screen no "DISPLAY IS SEEN" pls any help i will be thank full to them

rahul uzumaki said:
GUYS i am stuck in a Big problem.......
i actually wanted to change my ROM from Quarx Nightly Builds(jb) to WIUI (jb) according to the instructions in http://forum.xda-developers.com/showthread.php?t=1161110 i installed 2ndinit 1.4.2 and went to bootmenu and kept the default to 2ndint and after that when i went to recovery 2 options were their 1)stock recovery and 2) (forgot name) recovery so i went to stock memoery to wipe cache /data but i found nothing so i rebooted but from here trouble started it stuck at motorola ICON and dont start i asked 1 of my group mate about this he told me to flash my phone with SBF file so i flashed it sum SBF file later found that its SBF file of DEFY not DEFY + and now the phone does'nt even start only blank screen no "DISPLAY IS SEEN" pls any help i will be thank full to them
Click to expand...
Click to collapse
Can you enter to the bootloader, if you can, try flashing another SBF.

LeonardoJegigzem said:
Can you enter to the bootloader, if you can, try flashing another SBF.
Click to expand...
Click to collapse
yeap actually the phone was not at all starting so one of my fb friend told me too on the phone pressing the power button -vol and putting the battery at the same tym and vola bootloder is on and then i flashed it with standard SBF file anyway thanks a TON :good: