can you help me please how to solve this problem... i've done flashing many times but still stuck on sony ericsson logo only then after a minute automatically shut off itself... do you have any idea what is really problem of my unit... thanks in advance
You should try the following:
Take off the battery and reinsert it after a few seconds. Turn on the phone and as soon as the screen light goes on (before the sony ericsson logo) press the windows and "O" buttons on your keyboard at the same time.
A gray screen should come up, press W to "force a clean boot" and then the windows key again. This will reset your phone to factory settings. Meaning you will lose your data.
Related
Hi friends..
I have a very strange problem which cropped up yesterday night, we guys had gone for a movie and my phone was in my pocket only, then coming back it started to rain and i still didn't take it out, but after i took it out in room i saw suddenly the screen going blank and so many white and blue lines started coming and it started flickering very badly! finally the display got mirror inverted! it still responds to touches at the right places but the display which i get is upside down and mirrored so can't read a thing!
i think some how a water droplet had gone inside and did something, i took out the battery and dried it under the fan too but still no change, now when i keep it on stand by and resume by short pressing power button for a second the proper screen comes and then it inverts again! please help me out if you've encountered such situation before..
i know we can turn the display upside down but this one is mirrored too, and it all happened after the screen flicker..
hav tried hard resetting ur mobile
Some Sony Ericsson mobiles had a similar problem, only way to repair it was display replacement.
How to Hard Reset?
hi friends, i read on another forums too that hardresetting is one way, so i turned the phone off
removed the battery for 5-10 seconds
replaced the battery
pressed the green and red buttons which are on the left and right of d pad
together i pressed the reset button which is to right of the usb socket,
and nothing happened! i kept pressing it for 10 seconds, and no screen popped up, when i removed the buttons it just restarted, without any screen showing that a hard reset has been desired and no change had happened..
Am i hard resetting it the right way?
ur mobile shouldnt be off while doing the above steps. After doing tat ur mobile will restart showing an warning press the action key and continue.
krazineurons said:
hi friends, i read on another forums too that hardresetting is one way, so i turned the phone off
removed the battery for 5-10 seconds
replaced the battery
pressed the green and red buttons which are on the left and right of d pad
together i pressed the reset button which is to right of the usb socket,
and nothing happened! i kept pressing it for 10 seconds, and no screen popped up, when i removed the buttons it just restarted, without any screen showing that a hard reset has been desired and no change had happened..
Am i hard resetting it the right way?
Click to expand...
Click to collapse
Device must be off. Hold red button, green button and reset. If it doesn't work, press Power. After a while white letters on black screen should appear, then press d-pad and wait about 5 minutes. You'll see a new message for a moment and Windows Mobile will start.
No change after hard reset
hi friends, i got a video on youtube demonstrating me how to do a hard reset, i did it and got the warning message too and it got reset, restoring the original settings. Still the screen remains it's own inverted self!
Any suggestions what can i do next? what can actually the problem be?
i'm taking it for service centre tomorrow. Wish me luck any ways
Hi,
I know others have this problem. My phone starts, gets through loading almost all the way, but before I can do anything, it shuts down and starts all over again. It just keeps starting, loading, shutting down, over and over again.
The only way to stop it is to remove the battery. The hard reset instructions in my manual do not work. Hold the red and green keys and press soft reset. Can I somehow interrupt the load up or get into some kind of menu or flash the phone? I cannot sync with the phone since it doesn't stay on long enough before restarting again.
Thanks
Try to enter the bootloader screen (tri-color screen). If you can do that without it looping on you, you can flash from there.
Follow these instructions to enter your bootloader screen.
hi there another way too boot your htc elf connet it with usb start it and when start screen windows appear or start screen of your provider hold green red and on/ off up the phone keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.
Hi guys,
I have been using this Micromax mobile for about 2-3 months now, without any issues, but lately it has started acting up.
Whenever I press the start button, the screen displays initial windows logo with blue background, and it gets stuck there. nothing happens after that.
I even tried restoring the factory settings using, the Volume down + camera + start button combination. It does display a green screen, saying to set the factory settings press the volume up key and to cancel any other key, when I press the volume up key, it again disaplays the windows logo and stays stuck on the same screen.
I am currently not and in India and cannot goto customer care.
Does any one has a solution for my problem ? please help. Even if I need to re-install the os, please share with me the details.
Thanks.
Your device does not belong to this Board.
This board is for Android/windows mobiles not micromaxx.
Thread closed.
madnish30.
I don't know what's happening but whenever I do a soft reset or turn the device on, the boot time takes longer and after showing the orange Window splash screen, a black screen appears with the text that says:
The device in unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.
Press Volume Up to do a hard reset...
True enough when the black screen appears and when I press the volume up, the device starts to hard reset. But despite the hard reset, the problem persists.
If I just let the black screen stand by, around a minute or so, it disappears and the device boots up and does so successfully.
Anybody has had this experience or might know what's going on? Any help/inputs are truly appreciated.