hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Hi did you solve the problem as i am facing the same problem now
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
samouha20041 said:
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
Click to expand...
Click to collapse
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
but its not turning on or charging ,,,,its completely dead and when i plug the usb it immediately gives usb not recognized
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Tech N You said:
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
Click to expand...
Click to collapse
but its completely dead and not charging at all and when i plug the usb it immediately gives usb not recognized<<<and i tried it on 2 different pc with different os
Bricked xolo 8x 1000.....
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
8x 1000 recovery
At first download clockword recovery from xda for xolo 8x 1000
Pur the downloaded file in memory card , not in any folder
Then download mobile uncle tool and install clock word recovery mode
It will change ur recovery mod . then download stock ROM of xolo 8x 1000 from xda
Go to ur phone recovery page install the xolo8x 1000 stock ROM from ur memory card and then switch on ur phone it will work.:good:
Xolo 8x 1000 bricked while SPtool flashing
aniket_here said:
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
Click to expand...
Click to collapse
did your problem resolved?
mine is also bricked while flashing stock rom.
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
hi,
are you guys still facing issues with your xolo devices ?
If yes then you can download stock rom for xolo devices from following link: http://androidxda.com/download-xolo-stock-rom-model
Bricked
Pls help me:crying:
xolo 8x 1000 clone Hard bricked, dead, not charging, nothing
Ravindra123 said:
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
Click to expand...
Click to collapse
good day, pls my infinix zero, which is a xolo 8x 1000 clone is bricked, long story, i used sp tool, clicked download, plugged in phone, pressed volume, and then the download was 100%, but got a message cant remember the message. tried flashing again with same method but no response. currently the phone does not charge, cant come on, no recovery mode, the only thing is wen plugged to pc, i hear that usb device soun. and i can find the VCOM port stuff in device manager, please i need help
Plzz help me
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
I have xolo 8x 1000
so i was trying to flash a stock rom on my xolo
but unfortunately I selected wrong scatter file ie MIcromax a117
then sp flash tool started & red progress bar with 100% appeared then it stopped
and my xolo bricked
but then I selected the correct scatter file now when I am trying to flash it sp flash wont detect at all I mean I wont startup even though my pc alerts me that a device is connected
as vcom driver my phone is connected but I am not getting what to do plzz help me
I have bricked my phone
While flashing the rom it shows 'PMT error '
Please help me of with this
I downloaded many stock rom file From different website
It's shows the same error And usb debugging is disable on the phone when it
Got bricked Plz help me out
Phone Modle : MIcromax A120 (canvas 2 colours)
please help asap
Thanks!
Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not
Dead phone
MaxisMan said:
Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not
Click to expand...
Click to collapse
My phone is dead it wont start up I used Smart phone flash tool (Runtime trace Mode) and I have downloaded it from youtube. and after that my phone didn't started for once. When I connet my phone to my system without battery my system sounds of devices connected but after a min it sounds for device disconneted.
I'm stuck here please anyone help out I'm in hurry..
this may help you a lot try explore bro
http://smokermanxda.blogspot.nl/2015/09/all-roms-wiko-rainbow-micromax-a120.html?m=1
Sent from my Rainbow using XDA Free mobile app
my mobile canvas 2 colours is not working Factory reset loop
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone
Sorry to say but being oversmart with mobile phone cause the brick dead.
I am one of them.
I enjoyed changing rom every week..as any new rom posted.
One day my phone started force stopping apps ,i thought what's the big deal let's flash phone again.
My phone was on vionic L rom,tried to format and flash the cystom rom for C2C and i m done.
In flashing after downloading boot loader the process of download gets error..some no space error.
I give it in the repairig but it was not going to repair..its now in my cupboard in dead situation.. now on moto g2.
If you are enjoying changing rom ,increased internal storage capacity and your phone is still working
Simply stop doing this and stick to your stock rom
Chinmayhegde said:
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone
Click to expand...
Click to collapse
flash firmware thats all via spft
Sent from my Rainbow using XDA Free mobile app
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
yugandhar5584 said:
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
Click to expand...
Click to collapse
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
niyas90 said:
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
Click to expand...
Click to collapse
It is not working, after opening Smart Phone Flash Tool (Runtime Trace Mode)V3.1344.214 loaded scatter file and entered download button.... but at the end the progress bar is not moving further.... means its not working...
Connect the phone without battery after pressing the download button in sp flash tools
If not working install the correct mtk drivers.. Google it.
install tino driver google it . disbale antivirus . use update spft
Sent from my Rainbow using XDA Free mobile app
Hello to all XDA Family,
This is my first post here in XDA hope someone could help me reviving my Friend's HTC Desire 310. My friend asked me to repair her sister's bootloop HTC desire 310 uni sim. I searched a tutorial in XDA and downloaded the necessary files (Drivers, SP Flashtool & rom-Uni Sim). I followed the tutorial and finished flashing the stock rom. Unfortunately after flashing the rom the phone won't turn on or charge. I tried to reflashed it and got some error after the 100% yellow bar progress it gave me some errors.
*Below is the Scenario during and after flashing*
1- After flashing anything whatever it was the phone will get Hard Brick . Does it mean that Preloader or Bootloader "1st 2 data partations" is faulty.
2- Since Factory Mode is in Bootloader so you are not able to access it
3- since adb starts after bootloader phase so also u cant access it.
4- THANKFULLY i can get the phone into Preloader Mode by Removing Battery ===> connect usb ===> then hold Volume Down
5- In Preloader Mode the phone shutsdown in approxmatly 2-3 seconds getting SP Flash Tool Recognising it for 2 seconds and disconnect again after 2 seconds.
6- I can also get the phone into Preloader mode by Removing battery =====> connect USB =====> plug the battery back in. the phone will get into Preloader Mode for 2 seconds too but when i tried to flash the rom using SP Flash tool it give some error like (BROM ERROR: S_CHKSUM_ERROR) when the yellow progress bar reached 100%.
What can i do to revive the phone.? Please lend me your knowledge Thank you in advance.
Please help guys... thank you
Hello . i will explain my problem about my tablet A model 2016 SM-T585 .....After I see in last time my battery from tablet going down to fast ,,,,, (she keep around one day or up). .. I succesfuly root my tablet follow a XDA link and description....so i use ODIN last version and have twarp compatible with my tablet . i enabled administrative tools to tablet and inside to this point i enable OEM and USB debuging mode .....after i instal root i check if my tablet is rooted everyhting working perfect also i remember i do few restarts and tablet working perfect she start normal .....
so in next day i take a look in settings and i disable (without know i do something bad) administrative tools who manage (OEM ON and USB debuging ON ) after that to next restart tablet stop to bot . she show only samsung logo from bigin and red words left -up (custom binary blocked by FRP lock ) also i cant join in recovery to do reset but i can join in download mode and here i found that wont save me because with administrative tools off (last settings from tablet who manage USB debugging ) odin will not recognize my tablet conected to PC using a data cable
please i need help because i realy need my device its my personal good thing
ps:sorry my english
i instal an universal ADB file to allow odin see my tablet connected to pc ...next other problems still exist. please help
sorry
ok no answer no reply ok ....160 ponds losted to samsung in that morning ..... TY XDA ppl :crying::crying::crying::crying:
roselo said:
Hello . i will explain my problem about my tablet A model 2016 SM-T585 .....After I see in last time my battery from tablet going down to fast ,,,,, (she keep around one day or up). .. I succesfuly root my tablet follow a XDA link and description....so i use ODIN last version and have twarp compatible with my tablet . i enabled administrative tools to tablet and inside to this point i enable OEM and USB debuging mode .....after i instal root i check if my tablet is rooted everyhting working perfect also i remember i do few restarts and tablet working perfect she start normal .....
so in next day i take a look in settings and i disable (without know i do something bad) administrative tools who manage (OEM ON and USB debuging ON ) after that to next restart tablet stop to bot . she show only samsung logo from bigin and red words left -up (custom binary blocked by FRP lock ) also i cant join in recovery to do reset but i can join in download mode and here i found that wont save me because with administrative tools off (last settings from tablet who manage USB debugging ) odin will not recognize my tablet conected to PC using a data cable
please i need help because i realy need my device its my personal good thing
ps:sorry my english
Click to expand...
Click to collapse
I'm just a noob myself, so I can't offer any advice myself. (That would be the blind leading the blind.) But, a Google search shows that Samsung FRP problems are not unique to you. Two suggestions.
First, check out Rootjunky's method on this XDA thread https://www.xda-developers.com/rootjunky/
If that doesn't work, he also has another method that requires no computer. (I can't post the link because it is outside XDA and that is understandably blocked for total noobies like myself.) :silly: Just Google this:
"How to bypass Factory Reset Protection on Samsung devices without PC or OTG new crazy method"
Good luck!
Hi Please help
i have T585XXU6CTE6 (SM-T585, Samsung Tab A6 2016) Education Tab! (No play store, can’t install unknown source, not enable able)
i can’t open download mode (cannot install TWRP or Root)
can’t Factory reset even from recovery: MDM error
lock screen setting is disabled in setting no way to enable it! so i can't do factory reset using PIN Code error after 15 trial
every time i turn on developer option it disabled automatically once i leave About page
any suggestions??