Tytung ICS beta 10 Clk with data2sd camera freezes - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi,
I have a issue with the camera on ics beta 10 rom.
I have flashed the tytung ICS beta 10 rom, flashed beta8V2 clk kernel, flashed "reinstall data2sdV5".
I can only take one picture, after this one first my hd2 camera preview lags, then 5sec. later i cant press any button and cant use the touchscreen -> take out the battery
Somebody can help?

FTimo said:
Hi,
I have a issue with the camera on ics beta 10 rom.
I have flashed the tytung ICS beta 10 rom, flashed beta8V2 clk kernel, flashed "reinstall data2sdV5".
I can only take one picture, after this one first my hd2 camera preview lags, then 5sec. later i cant press any button and cant use the touchscreen -> take out the battery
Somebody can help?
Click to expand...
Click to collapse
Have you tried clean installing and not running the dats2sd script?

Mhm.. i can try this.
But i like data2sd... 2gb internal memory
I will try not to use data2sd and do a clean install with a 5/180MB partition for rom...
I will report the results

Related

[Q] RafDroid HD 4.0.2: Cyclic rebooting after splashscreen

Hi. I've been using Rafdroid HD 4.0.2 for the past week. And today I've decided to update kernel to Rafpigna 1.9 OC.
So, I went in the MAGDLR menu, selected AD Recovery, then I chose kernel_rafpigna_1r9_OC.zip from SD Card and install it. And get cyclic rebooting after splashcreen "Rafdroid HD" as a result. Tried to downgrade to rafpigna 1.8 OC - rebooting too.
What should I do? Help please.
Do you have the right clockwork partition size flashed to your HD2? What about your SD card? Is it partitioned with an ext3/4 partition? If you do make sure you have the?, clear cache and wipe dalvik cache and then reflash the rom and it should work. Also make sure you give the Rafdroid Rom time to boot. With my experiences they've always taken way longer than any other roms I've tried.
Sent from my HTC Vision using XDA App
so it was workiung until you upgraded the kernel?
did you make sure you got the right kernel as there are 2 available, one for froyo, android 2.2 which is what that uses and the GB version for gingerbread

JW MIUI 1.7.1 crashes often

Hello guys,
i have big problems with JW MIUI 1.7.1. It is very unstable for me. I am using MIUI since a long time and I flashed the new one before a few days.
I flashed it with Clockwork recovery. My problem is that it often crashes and reboots automatically. I cant say when this happens but it happens about 10 times per day.
Where can i read errors from?
In the JW MIUI 1.7.1 thread is written that Clockwork users have to install an update but when I flash this magldr says "Boot kernel load failed".
Can anyone help me? I love MIUI and the ROM is great again but these heavy crashes suck
Thanks a lot and sorry for my bad english
markokk said:
Hello guys,
i have big problems with JW MIUI 1.7.1. It is very unstable for me. I am using MIUI since a long time and I flashed the new one before a few days.
I flashed it with Clockwork recovery. My problem is that it often crashes and reboots automatically. I cant say when this happens but it happens about 10 times per day.
Where can i read errors from?
In the JW MIUI 1.7.1 thread is written that Clockwork users have to install an update but when I flash this magldr says "Boot kernel load failed".
Can anyone help me? I love MIUI and the ROM is great again but these heavy crashes suck
Thanks a lot and sorry for my bad english
Click to expand...
Click to collapse
Did you try a clean install?
Just use the daf thats inside the download file. Make sure you change the flash.cfg file as suggested.
I always do a MIUI backup than clean install (also repartition sd card) and flash. After that use Backup to get your apps back again.
Thanks for your fast answer mate.
I formatted and repartitioned the sd card too. But inside the zip, where is the DAF? I didnt find it that is why i flashed clockwork and then flashed the zip with clockwork.
What do you mean with chaning the flash file??
Thanks a lot

[Q] Any way of rolling back from ICS to Gingerbread on HTC HD2 T-Mobile

I have recently ported NexusHD2-ICS-CM9_V1.4 on my HTC HD2(T-Mobile) and I need to downgrade this to NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) build?
I just tried with MagLdr with the new zip file, but at the time of first time boot up with Android setup, it complained that some google.com.XXX is already missing. So basically it wouldn't allow me to complete the setup for Gingerbread. Only reason why I am looking for downgrading is because I feel a lot of Market apps don't work on ICS Rom.
For example a bank app has a capability of scanning a check with my camera but when I am using it in ICS, it's saying that "XXX App has stopped working" please report the error.
Similarly some of the GPS application is not working fine on ICS and I am hoping this is happening because ICS is still in BETA mode and hoping that Gingerbread is much more stable then ICS.
task29
install hspl magldr and then flash the nand rom.
best solution.
aleejaved said:
task29
install hspl magldr and then flash the nand rom.
best solution.
Click to expand...
Click to collapse
Dont do that, it's just unnecessary. Go into CWM, wipe, repartition then flash your new ROM. Also, you didn't 'port' Android to your phone, you flashed it.
Sent from my HTC HD2 using XDA
rolling back
I tried to wipe partition then install from zip file and did not work any suggestions ?
Since most GB roms requires less system partition than ICS roms, I would think repartation will help. Besides after repartition, any trace of any rom is wiped clean completely.
After that you should be able to flash the zip file normally.
Ill try that when as soon as i get home and let you know if it worked , thanks
worked , thanks

[Q] Flash player don't work in Aurora (DZO rom) - Open Again

So i came from gb 2.3.5 flash works fine! then i upgrade to 2.07 with the 3.08 kernel! and the flash don't work. i install flash but i can't clean is cash or data only can force stop and uninstal. when something on the web needs to use flash the browser always shuts down but when i press home button for a while it appears the option to choose the browser you want and the browser which was closed.
I think I'm the only person with this problem!
now I'm thinking in downgrade to gb 2.3.5; then go to .35 aurora i think is the 2.05 or 2.04, and then go to 3.0.8.
please let me know what you think
Edit1
it's a noob thing has me!
when i root the phone for the first time i did it with the sd card mounted!!
i downgrade for gb 2.3.5 official, do all the wipes and root the phone white the sd card unmounted! after that i install the 2.04 aurora, check flash if was on; and it was, after that 2.08 again, flash runs perfect!
i did it
edit2
don't restore nothing or it will do it again!
i did it and now i have to do it again
edit3
do all the wipes! problem solved
Edit4
Don't restore nothing. With the wipes i can only use the stock browser.
In firefox appears something like some credentials dont let me use flash.
I unable them and still do the same.
Going to reinstall from the scratch. Wish me luck
Sent from my U8800 using XDA
Same here, only works in stock or browsers that use stock.
Dolphin HD is the best for ics so far, flash works with it as well
Reinstall done! The same problem... nothing solved.
Sent from my U8800 using XDA

[Q] Multiboot CM7.2 and Miui or Ms2Ginger

Hi, a noob here
I have a green lense (SOC) Defy with CM7.2.
I have tried a CM7.2 and CM9 multiboot, it worked really well apart from my unSIMlock. It didn't work for my CM9 then it messed up my CM7.2 unlock aswell, i had a nandroid backup though, so i restored.
Anyway, how can a multiboot CM7.2 as main ROM and have either Ms2Ginger or MIUI/WIUI v4 as my secondary, is it the same procedure, or is there some diferences. I really want a second ROM, but I don't want to brick my phone, even if it is nearly impossible to brick it.
I have a Samsung 16GB microSD class 10 if that helps.
Thanks
Will
so no-one will help me then
willster273 said:
Hi, a noob here
I have a green lense (SOC) Defy with CM7.2.
I have tried a CM7.2 and CM9 multiboot, it worked really well apart from my unSIMlock. It didn't work for my CM9 then it messed up my CM7.2 unlock aswell, i had a nandroid backup though, so i restored.
Anyway, how can a multiboot CM7.2 as main ROM and have either Ms2Ginger or MIUI/WIUI v4 as my secondary, is it the same procedure, or is there some diferences. I really want a second ROM, but I don't want to brick my phone, even if it is nearly impossible to brick it.
I have a Samsung 16GB microSD class 10 if that helps.
Thanks
Will
Click to expand...
Click to collapse
Hi, I have the same defy that you do.
You should be good to go, just install the latest multi boot zip, reboot, then either extract the fsimages zip from the first post into the multiboot folder on your sd, or even easier, download the latest multiboot manager, hit menu, then create vfs. Reboot, you'll see a new menu.... choose cwm recovery, select your vfs and install it. When you reboot just choose the one you want, no fuss no muss
Sent from my MB525 using Tapatalk 2

Categories

Resources