So I can't find another thread with this issue so I guess I'll ask it here.
I bough my wife a nook color for x-mas, rooted it with auto nooter, everything is ok. 1.2 comes out and I un-root, update to 1.2, manual nooter and re-set up with titanium backup, flash dalingrin's oc kernal. here's the problem.
On the stock nook side, none of the books or magazines that I can normally download will not. It says "Internal error: Exception executing the command"
What can I do to get this working again? The nook is registered with B&N, everything on the "Android" side is working fine.
Thanks in advance for your help
I am not sure what you did to unroot. This worked for me:
1. restore to stock 1.2 using Nemith's zip file.
2. register the NC and download all the books
3. root with MN 4.5.25.
Since you have the a bootable CWM, this should be simple.
Thanks, I'll try that
Thanks alot, worked like a charm! guess I just didnt load stock 1.2 correctly.
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
i do not have an answer but this answers my question of whether I want to run manual nooter on my 1.3 or try cm7. the cm7 steps seems more intimidating
Well i tried several more times last night with no luck. Then i got brave and just wiped everything (data,system,cache,dalvick) then flashed cm7 and gapps straight from my cwm boot card. I somehow
Ended up with a fully functional nook. App market works. Rebooted several times to be sure. I even tried usb host with my homemade adapter. Mouse, keyboard, and sandisk cruzer all work splendidly thru a powered hub.
My only mistake was i cant find my backup of stock 1.3 rom. Is there one floating around?
Sent from my LG-VM670 using Tapatalk
If I'm understanding correctly, you're trying to go from CM to 1.3, correct?
From what you've described, I suspect Clockworkmod 3.0.2.8 is your problem. If you look carefully as you format /data in preparation for reloading the BN 1.3 firmware, I think you'll see that the format is actually failing. That version of CWM doesn't handle the partitions correctly.
You want 3.2.0.1. See the edits at the top of this thread: http://forum.xda-developers.com/showthread.php?t=987735
If you're already on CM7.1, you probably have the correct version of CWM installed. You can save yourself a step by formatting the /data and /system partitions using that, then continuing on with the rest of the procedure for restoring BN 1.3. I went through all this myself a few days ago while preparing to go to BN 1.4.1.
I forgot to mention in my last post that i realized i was using the wrong cwm image and i burned another card with cwm 3.2.01.
I was still getting a boot-loop so i wiped everything and went straight to cm7.
Sent from my LG-VM670 using Tapatalk
@bobstro
I didn't read your post correctly.
I had a stock nook that i want to install cm7 on. Not the other way around. I asked about a stock 1.3 file just in case i need to do a restore. The nook is done. Its running cm7 just fine and i have given it back to my friend.
I really need to get myself one :-(
I usually mess around with my sons but he's at his mothers for the weekend with it. After christmas im getting one. Dont know if it'll be a color or a nook tablet but im getting one for sure!
Sent from my LG-VM670 using Tapatalk
If you intended to install CM7 from beginning, then why you wasted time messing around with ManualNooter?
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
pdrift said:
ok so after 3 days of trying, i keep getting stuck on a boot-loop I am asking for some help.
before I begin, I have successfully rooted and installed cm7 on 2 nooks that came factory 1.2,I have searched google and these forums but can't find anything with my specific needs.
I have followed the directions on this thread to a tee:
http://forum.xda-developers.com/showthread.php?t=1054027
i am using a bootable cwm card (2GB) (cwm version 3.0.2.8)
after installing ManualNooter-4-5-18.zip then ManualNooter-4-6-16.zip I remove the sd card and reboot and I get a boot-loop with the "n color" screen animation. It has not booted successfully yet.
I have already used the 8 failed boots method to restore to factory and re-registered the nook.
Then I redid everything again and im back at the boot-loop.
any ideas
Click to expand...
Click to collapse
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
pdrift said:
Im still rather new to working on nooks. I thought that it was required to use manual nooter first. Im still not sure.
Can someone clarify for mr. If i just bought a nook and i want cm7 on it, whats the best procedure?
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I hope you do use Windows at some points.
Let's put it this way.
You bought a PC with Windows XP pre-installed, get home, you don't want XP, so you install Windows 7 on the PC. You just whack the XP.
Same theory applied here, B&N shipped their NC out with the original stock ROM, which is Froyo-based OS. You want to install CM7, which is Gingerbread-OS ROM. You just whack the stock and install CM7.
oh I get it know. so its pretty easy if you want to go straight to cm7 just wipe and flash.
After reading some posts from the nook tablet section, i guess i'm getting a nook color.
what a shame about the locked bootloader :-(
i didnt technically solve the boot loop issue, i just erased everything, but should I mark this as solved and if so how?
The current Nook Color bootloader is not locked. The Nook Tablet's is. I wouldn't necessarily rule anything out, though. The bootloader on the Motorola Droid 2 is also locked, and there's quite an active Cyanogenmod community around it. The only problem is that we're stuck with whatever kernels B&N release, so ICS may be a long way off. I suspect the NC will remain the tuner's machine of choice, but the performance on the NT is very nice. If you can live with a rooted B&N ROM, it's a nice device for now.
billingdl said:
The only boot loop issue I'm aware of is related to Adobe AIR and Flash. The fix is to uninstall them and then reinstall from Market.
Sent from my NOOKcolor using XDA Premium
Click to expand...
Click to collapse
No, it seems that some 1.3 based NC units will bootloop if 4.6.16 is used to root them. I'm not sure why. Even after repartitioning to original nook partition sizes, or using CWM 3.2.01 (which supports the new partitioning), it'll still bootloop if 4.6.16 is used. Might be because of the different kernal included, but I'm not knowledgeable enough to know for sure. They root fine with 4.5.18. Haven't tried one with the new 1.4.1 compatible nooters.
To the original poster;
I'm having the same problem here, installed 4.15 successfully, installed 4.16 and am getting stuck in boot loop at the rainbow nook color screen.
I'm not understanding the 8 boot fail procedure though. Is this when you let the boot loop run through 8 times or when you get to the point of when the boot loop starts, shut the NC off and power it back on?
Also, to install cm7, all you did was put it on your sd card, and installed it through cwm?
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
pdrift said:
The 8 boot method if i recall correctly is when you boot the nook and wait until the splash screen shows up immediately hold the power button and shut it down. Repeat 7 more times. If you did it correctly it should take over and do a restore on its own.
If you want to go straight to CM7 I dont think you need to go thru with this procedure because if you create a bootable cm7 card and insert it in your nook while its off then power up, it should boot you into cwm recovery. Once in the recovery you can flash cm7.
sent from my OV CM7 IHO using tapatalk
Click to expand...
Click to collapse
Thank you good sir! I was stuck in boot loop forever and couldn't find a clean explanation of the 8 boot fail process. I always tried to turn it off when the rainbow nook color screen came up.
I got it reset, made a flashable CWM SD card with 3.2 and then flashed CM7 on there and it works great!!
That was very frustrating, thank you!
Dont mention it, Glad to here I was able to help you out. I felt the same way when I was in that situation. Lots of googling to get a clearer idea on what that 8 boot method entailed. CM7 really makes it feel like a totally different device.
To all the devs that work on these projects, thank you
sent from my OV CM7 IHO using tapatalk
ive recently purchased a nook color version 1.3 and did all the steps to build cm7 on sd ard inserted it into my nook it downloaded then rebot and seem to come up im cm7 but my touch screen isnt working any suggestions?
Hey guys. I didn't back up my nook before I rooted it. I know, that's bad. I was wondering if anyone has the original nook image saved that then could spare? Its a nook simple touch glow light. Any help would be greatly appreciated.
Hey guys,
I got a Nook Simple Touch Thursday evening. This morning, I powered it on and registered it on B&N. I imaged TouchNooter to a 2gb microSD via a microSD->SD adapter, inserted it into my Nook, and it brought the TouchNooter and the screen went dark successfully. However, since then, my device has been in a boot loop and all I can make it do is reboot. I ran the factory restore function built into it (Lower two buttons), but that did nothing.
I was planning to use the n2t recovery option in case this happened, but the links to it are dead. I tried CWM, but my Nook won't boot into it for some reason.
Any ideas on how I can fix this?
Did you make a backup image before you started?
jordonwii said:
Hey guys,
I got a Nook Simple Touch Thursday evening. This morning, I powered it on and registered it on B&N. I imaged TouchNooter to a 2gb microSD via a microSD->SD adapter, inserted it into my Nook, and it brought the TouchNooter and the screen went dark successfully. However, since then, my device has been in a boot loop and all I can make it do is reboot. I ran the factory restore function built into it (Lower two buttons), but that did nothing.
I was planning to use the n2t recovery option in case this happened, but the links to it are dead. I tried CWM, but my Nook won't boot into it for some reason.
Any ideas on how I can fix this?
Click to expand...
Click to collapse
You might want to try TouchFormatter. I used it successfully to recover from a failed rooting attempt.
When you have your nook restored, be sure to check what firmware version is on your nook before you try to root.
If you have US Nook with firmware 1.2 then you will need to use Tinynoot.
Be sure to make a back up of your nook before you try to root.
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Thanks for the advice guys. Unfortunately, I already returned my Nook, for a number of reasons, so I can't do anything now.
Again, thanks anyway though. Maybe this will prove useful for another noobie.
I just modded my daughters Nook Color using the following instructions http://forum.xda-developers.com/showthread.php?t=1030227
Everything went great but now do I have to block ota's? Also can I sideload like I did on my Nook Tablet? Thanks for the help everyone!
shags72 said:
I just modded my daughters Nook Color using the following instructions http://forum.xda-developers.com/showthread.php?t=1030227
Everything went great but now do I have to block ota's? Also can I sideload like I did on my Nook Tablet? Thanks for the help everyone!
Click to expand...
Click to collapse
1) If you installed CM7 or CM10 internally on the Nook Color you do not need to worry about OTA updates since you no longer have BN firmware. Yes you can side load apps in CM7 or CM10. "Enable unknown sourses" in settings-security.
2) If you just rooted the Nook Color and retained the stock firmware you may still get OTA updates. Enable "unknown sources" to sideload apps. Read the threads on how to block otaupdates on stock firmware.
I did install it internally so that is great and so is sideloading! I did have a problem this morning though. This is my daughters and she had ran the battery completely dead. I charged it and tried to turn it on and it wouldn't do anything. I recharged it again and I held the on button for like 20 seconds and then again and it came on booting to cm7. The same thing happened to my sons tablet (only rooted no cm7) yesterday and when I did it, it went back to factory settings. Ah well. Any ideas on the power problem? I understand this is the color forum but just mentioning the tab as I thought it might be related. Thanks!!!!!
shags72 said:
I did install it internally so that is great and so is sideloading! I did have a problem this morning though. This is my daughters and she had ran the battery completely dead. I charged it and tried to turn it on and it wouldn't do anything. I recharged it again and I held the on button for like 20 seconds and then again and it came on booting to cm7. The same thing happened to my sons tablet (only rooted no cm7) yesterday and when I did it, it went back to factory settings. Ah well. Any ideas on the power problem? I understand this is the color forum but just mentioning the tab as I thought it might be related. Thanks!!!!!
Click to expand...
Click to collapse
Once the Nook Color goes completely dead it will not turn on until the recharge level is at 15 percent or more. It may be the same for Nook Tablet since they both use the same charger/cable. Did you lose root due to an ota update? You will get better support for the Nook Tablet in the Nook Tablet forum.
Thanks for the help on my color i was wondering bot the power level. I will post on the tab forum thanks again!