Related
hey guys i have a HTC HD2 i already added the new radio
an installed magdlr ( i think thats the name) so far, i havnt had any luck flashin any roms...they flash, but never boot
i have this one flashed atm moment HyperDroidGBX-v12
but as i just started i cant post in that thread
sorry, i used the search bar, so dont eat me alive plz
i get to the blue android, but it just hangs, reboots, an does it again
help me out, what am i doin wrong
I have installed everything but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android
^ kinda like this
but im usin a regualr battery
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
rauschkugl said:
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Click to expand...
Click to collapse
yea i installed it, but im not sure if i did the partion size thingy?
maybe, but just in case i didnt, how do i do that step by step?
also do i have to fromat my sd card for this to work, its already fat 32
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
ill try that after soem one explain the pastion thing to me
although i think i did,i went to clockwork an set it to 1024
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
i set it to 1024,an 0 for the swap
an did everything in your post
still restarting, gettin worried
what do i now?
bumping
in the hopes of being helped just teeny bit quicker
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
mutil said:
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
Click to expand...
Click to collapse
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
SubZeroMaster said:
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
Click to expand...
Click to collapse
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
mutil said:
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
Click to expand...
Click to collapse
i used the program...fine
i wiped..fine
i flashed rom...fine
restarted fine...
didnt boot in to android???
whats goin on?
also thanks for the help so far, but dont abadon me yet plz
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Marvlesz said:
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Click to expand...
Click to collapse
followed this to the TEETH
an loopin......
ARRGGH plz guys dont forsake me just yet
also thx for every
bumptastic
142 people have viewed this thread
but only 4 or so people helped!
come on guys!!
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
SubZeroMaster said:
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Click to expand...
Click to collapse
man which rom you want to use? you had said hyperdoid and now you talk about 250mb nand which has nothing to do with hyperdroid!?
Marvlesz said:
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
Click to expand...
Click to collapse
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
an thanks for everyone helpin get this far
SubZeroMaster said:
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
Click to expand...
Click to collapse
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Marvlesz said:
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Click to expand...
Click to collapse
saw it in in some guys signature (250 nand ) although i dont knwo if that relates to me
no, i cant put the recorvery stuff on my sd becuase, windows is saying i have to format first (then is says it cant)
is was fine yesterday, maybe all this "stuff" i may/may not have done something
anyway how i can fromat so i can proceed?
Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?
You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
ph03n!x said:
You do not have to delete anything using root explorer, and your apps seems to be in your SD card's EXT partition. Your cache seems poetry high though- not much you can do without backing up, repartitioning and restoring.
The free memory seems ok, though not great. Sense 3.5 builds are still being developed and are not stable yet. The HTC logo that flashes by is your Android rebooting.
If you prefer stability, choose an AOSP or CM7 build...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
Click to expand...
Click to collapse
According to your words, I don't need anything? or can I do something?
Sorry for my bad english, I hav never studied it in a good way, I'm trying to learn it now.....
Stuck on Quitely briliant screen
Hi
I have tried flashing this rom through CLW and everything goes well until the device reboots. it gets stuck on the Quietly brilliant screen. I left it run for 30 minutes with no luck of actually booting the system.
I have noticed when i pull my battery out and mount the device nothing is created on the SD card (no folders or files).
I have a 3 GB SD card and I have partitioned it through AD recovery with 2GB and 0 swap EXT partition.
I flashed MYUI again since i was using it before but i would really like to try your Sense Rom on my HD2 (T-Mobile).
Am I missing something? I have to say that I also tried using other Sense Roms and got the same problem. stuck on the HTC green screen or the Quietly brilliant screen and my system never loads!
Thanks for you help and keep up the good work.
My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?
franklinzappa said:
My HD2 is the european version...
But perhaps I can help you... Have you partitioned your cwr?
Click to expand...
Click to collapse
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks
franklinzappa said:
Hello everybody
I have to post here because I can't in NAND development...
This is a general question, but I post the title of the Bliss sense 3.5 rom because I actually have this...
This is a great rom , but I have 2 problems with my EU 512mb HD2...
The first, and very important, is the room left... Looking with Apps2sdgui those are my general info:
internal memory free(total): 25mb(206mb)
sd-ext free(total): 1392mb(1830mb)
cache free(total): 25mb(206mb)
So, what can I exactly delete using root explorer? Can you explain me please what exactly apps2sdgui does? I haven't understood its function, because my internal memory is full though Apps2sdgui says "apps are on SD"...
The second is the available ram... I have max 60/70mb free, according to Apps2sdgui... Sometimes, when switch from an app to another, I see the white screen with the htc green word in the middle for a 10-15 seconds... What can I do to make my phone faster and more fluid?
Click to expand...
Click to collapse
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)
nickshel81 said:
Hey,
Thanks for the reply. I am not really sure I have done CWR partition. All I have done is SD partition to 2GB and 0 swap since I have always used MIUI Roms on my HD2 and before I had WM7 and stock Roms.
If CWR partition is needed for this rom how do u do that?
Thanks
Click to expand...
Click to collapse
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me
langthang said:
Because this ROM very big so it need use many NAND space and SD-EXT Partition to store sytem and app.
App was moved to EXT partition but Dalvik cache still on NAND so you can move Dalvik cache to EXT to save more Internal memory (when you move Dalvik to EXT, you will have about 150-200 Mb free on NAND)
Click to expand...
Click to collapse
thank you langthang, I'll move dalvik cache...
Can I ask you if this will make my phone slower???
franklinzappa said:
Ok, as I thought, you didn't
If you already have magldr, this is what you have to do:
1. flash recovery. this is the link: http://www.mediafire.com/?f81pamq6fbjmtw5
(I've found this link here in the forum)
download it, then you have to modify this file: flash.cfg
you have to open it with notepad, but put an eye on NOT change permanently the extension ( it's .cfg, have to be .cfg)
once you opened it, you have to modify like that:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 440M
cache ya 5M
userdata ya|asize|hr allsize
-my english is not very good, if you don't understand PLEASE tell me and I'll explain it again-
save the changes, then go to magldr menu, connect phone to pc, search in your phone in magldr menu "usb flasher", run DAF.exe in recovery folder on pc, follow the guide. Your phone will reboot and go to magldr menu.
Choose "ad recovery".
2.wipe full data, and dalvik cache
3. flash rom: in ad recovery, choose "install zip from sd card", and select your rom
4. reboot
If someting goes wrong, please tell me
Click to expand...
Click to collapse
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks
nickshel81 said:
cool.
Thanks again for your help. ill try it out and let you know if it worked
one thing though if I made those changes will I be able to use other Roms in case I didnt like this one? i.e. can i use MIUI in case i changed my mind?
Thanks
Click to expand...
Click to collapse
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result
franklinzappa said:
You're welcome ( is this the way to say this?)
Yes of course, you can always change rom
If you want to change to miui, cm7 and so on, you only have to change cwr version to v3.0.2.5 or else ( it's written in rom thread )...
if you want to change recovery partition, you only have to use notepad again and run daf.exe again... I think it's quite simple...
Please tell me the result
Click to expand...
Click to collapse
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help
nickshel81 said:
Just tried it. It looks amazing and exactly as I expected.
Only one thing that I don't like is that it is very choppy! as in when u click on something it takes few seconds to load or when u switch screens there is a lag or a drag as if there is not enough memory to run the command.
Anyway we can tweak the settings of the recovery to make it faster?
thanks again for all your help
Click to expand...
Click to collapse
Yes, I experience it too... If you read my whole thread, I asked for some solution, but I think there aren't... Sense-based roms are slowlier than non-sense, hd2's hardware is perhaps a bit too old, but this is only my opinion... Have you read the thread in Nand development? I've tried some sense 3.0 rom, but I can say with no doubt this is the fastest...
This is the 1.1 release, next update will probably be better in speed... And I hope in camera and bluetooth fix as soon as possible... I'm pretty satisfied, for maximum sense experience, I think we should buy sensation, evo or other younger htc
You can try deleting some apps, if you don't use them, and look at task manager, it helps you stopping background apps, that can free ram memory...
Which kernel do you use? Most of people wrote in rom thread in nand development that jw-tytung is faster, and I confirm... All these things will help you, this is my opinion...
Hey there,
i'm using the HTC Bliss Rom for 2 days now and i think it's really great, but i have one problem, and it is significant. Everytime the display goes in standby-mode the connection gets lost. Even when i call somebody and put the phone to my ear, the connection breaks up immediately when the display turns itself off.
I really want to keep this rom, so please can somebody help me
Hi all,
I managed already to flash some different ROM into the NAND of my HD2. Right now I´m trying out MIUI_GINGER_2.3.7_STABLE_V4.1. Although many readers are reporting brilliant performance and behaviour of the ROM, my device is coming up with "not additional memory" error message when I try and install the first app from market right after new installation.
Can some expert please tell me:
1. How can I read out the current partition settings of my device?
2. How do you usually change partition sizes (using HD2 Android NAND Toolkit?)
3. Somebody tell me the optimal partition sizes for the above mentioned MIUI ROM?
Thanks upfront for your help!
Peter
Easy way to rectify this is go to hd2 toolkit set the system partion to 130, and the cache size to 2, let it do its thing, in cwm format and wipe everything, and reinstall rom. Ive ran it before with over 100+ apps before with plenty left over. Let me kno how it fares!
sent from my HTC NexusHD2 provided by Tytung
Seems I´m doing something wrong. :-(
1. I´m doing a task29
2. Via cLK Repartition I´m applying the partition data you mentioned above
3. I´m installing MAGLDR
With this status I´m not able to install my ROM without having repartitioned the device once again via MAGLDR Repartition. The result is, that I have no more than 0,93 MB memory left after having installed the OS.
How do I install the ROM correctly via CWM?
Many thanks,
Peter
PeteR1200GS said:
Seems I´m doing something wrong. :-(
1. I´m doing a task29
2. Via cLK Repartition I´m applying the partition data you mentioned above
3. I´m installing MAGLDR
With this status I´m not able to install my ROM without having repartitioned the device once again via MAGLDR Repartition. The result is, that I have no more than 0,93 MB memory left after having installed the OS.
How do I install the ROM correctly via CWM?
Many thanks,
Peter
Click to expand...
Click to collapse
Why on Earth would you use the cLK repartition function when you have MAGLDR installed?
I would just use the 150Mb partition at the end of this guide, it fits the requirements set by the OP exactly.
I want to try a ROM which says:
Partition Layout (5/155/5) use hd2 toolkit
SDext: min. 500mb
I am not 100% sure what does it mean SDext is probably 500 ext patition bigger than 500
5/155/5 is
5 cashe
155 data and
5 WHAT????
Cant figure this out.
Thank you
Do you have any android rom installed? If yes, then you should (I had on every rom) have an option on reboot menu: reboot, recovery and BOOTLOADER - choose this one. And there you have SETTINGS->REPARTITION NAND and there set these ones your roms prefers. If you have not, then try to install this rom choosen by you, and maybe there will be option BOOTLOADER on menu. These are partitions, for example 155data(system) is space for system (I think). But standard settings are good for me and works with every rom.
[EDIT]
Try to boot phone by holding [back] nad [Power]. This opens bootloader and there you can set all.
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
This question was not "how-to", but more "what does 5/155/5 mean" type of question. Last time I played with internal memory of the device all I had to do was select the appropriate CWM version. This is why I asked here, I think it belongs, cos is general knowledge kind of thing.
I kind of dont see how to fiddle the size of /boot, no problems with /data and /cashe, but since you say this is default I wont have to, I suppose.
A few days ago I was pissed of by CyanogenMod (and stock Andriod in general), cos the only option to deal with Vcards is Handsend sms, but Handsend will not search for contacts correctly in Bulgarian (CYR) when installed on vanilla Android - small letters will not match capital and vice versa in contact names. This is why I decided to go for Sense - the message app is simply better...
Rather than using toolkit, download the CWM package and inside is a file called flash.cfg. Open this file and you should get this (maybe a different system or cache size)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 5M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
5/155/5 is basically the middle three lines, i.e. 5Mb boot partition, 150Mb system partition and 5Mb cache partition. I don't know why chefs post it like this as I'm reasonably sure the boot is always 5Mb (I've never seen differently) so they could just post the system partition size (as quite a lot do). Hope this helps
shanman-2 said:
Partition your nand using HD2 Nand Tookit.
First 5 is boot partition set to 5 by default
155 is system partition,
next 5 is cache size.
sdext partition can be set up from recovery (in cwm recovery go to advanced menu and select partition sd card), follow instructions for your rom. This can be used as if it was internal memory by your rom..
ALSO you might want to take a look HERE..
Edit: best to post any questions about any specific ROM in the ROM thread
Click to expand...
Click to collapse
?????????!!!!!! ???
shanman-2 said:
?????????!!!!!! ???
Click to expand...
Click to collapse
mmmm which part for the "?????????!!!!!! ???" ?
! that bit
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
ariebower said:
You can use CWM Recovery it's very easy to use for repartition your nand, but you must install MAGLDR or CLK first if you want go to recovery..
Click to expand...
Click to collapse
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
deckoff said:
Hm, this is something I missed!
1. I use mainly Ubuntu, hence I have have to rely on Wine or a pc I almost dont use for windows
2. I have CWM and MAGLDR installed
How to re-partition based on config file only? Can I do it?
Put the config where? (sdcard, ROM.zip)
Run what in CWM.
You would make my day, since I am away form how, with my laptop only, the ROM I run has a bug with wifi tether and I have to change it, but options are quite limited, since I dont know how to re-part, I have to choose ROMs that rely on system less or equal to 155 at teh moment. And I need a Sense, since others cant receive 100% vcards in Bulgarian (CYR)
Click to expand...
Click to collapse
Maybe this thread will help you to do it without a PC
Q&A for [Jan 02/01/2015][KK 4.4.4][ LiquidSmooth][Official] Kernel 3.0.101 [ION]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Jan 02/01/2015][KK 4.4.4][ LiquidSmooth][Official] Kernel 3.0.101 [ION]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP
Help, does this rom will work on NAND with MAGLDR and ClockworkMod Recovery?
error
after install this rom , i see error
unfortunately, the process android.process.media has stopped
and camera not worked))
i use twrp settings for EU
Recovery 13 MB
boot 5 MB
msic 1 MB
system 302 MB
userdata 85 MB ( this not stand 85 .. clk use 107 mb in default )
chache 15 MB
i install in mode nand + data on ext (use partition ext4 primary and default cluster size )
-----------------------
ask , you use swap file?
jackarthur91 said:
Help, does this rom will work on NAND with MAGLDR and ClockworkMod Recovery?
Click to expand...
Click to collapse
I don't know, I don't use cwm
devdvd said:
after install this rom , i see error
unfortunately, the process android.process.media has stopped
and camera not worked))
i use twrp settings for EU
Recovery 13 MB
boot 5 MB
msic 1 MB
system 302 MB
userdata 85 MB ( this not stand 85 .. clk use 107 mb in default )
chache 15 MB
i install in mode nand + data on ext (use partition ext4 primary and default cluster size )
-----------------------
ask , you use swap file?
Click to expand...
Click to collapse
increase your system size to 380
Since you choose dataonext, the userdata partition in nand is not used, so can be tiny. You may as well use the nand for system, so 380mb is good.
Go higher with System size... My size is with native or direct install
Sent from my HTC One using XDA Free mobile app
yess v.good soft keys but that blinking all time
hello dev.
thnx for the great rom, '[KK 4.4.4][ LiquidSmooth][Official] Kernel 3.0.101 [ION]'
soft keys are v.good soft keys but that blinking all time anytime i press that its pressed & stay pressed , & 1 more thing i installed it data2ext in clk partition is same as u suggested, but after installation i dont have the internal storage , means ext4 not detected but fat32 partition is ok.
please tell about this ,
& in another installation method magldr > data2ext first reboot stuck at 'booting from nanad > starting'
please suggest something
...
stuck in pixeldroid splash screen, please help. thanks.
LiquidSmootg DirectSD on sdext2
Hello!
Is There a way to install this rom on sdext2 partition?
I want to have some other rom with dataonEXT.
I have HD2 EU with installed Extented TWRP 2.6.3.4.
Partitions on my sd card are:
sdcard
sd-ext 2gb,
sdext2 2gb
swap 512mb
I've already installed the other rom on DataonEXT and LS on DirectSD but im affraid, that both roms use sd-ext istead of other using nand and sd-ext and LS using sdext2.
Sry for my poor english, im still studying.
Boldeki said:
Hello!
Is There a way to install this rom on sdext2 partition?
I want to have some other rom with dataonEXT.
I have HD2 EU with installed Extented TWRP 2.6.3.4.
Partitions on my sd card are:
sdcard
sd-ext 2gb,
sdext2 2gb
swap 512mb
I've already installed the other rom on DataonEXT and LS on DirectSD but im affraid, that both roms use sd-ext istead of other using nand and sd-ext and LS using sdext2.
Sry for my poor english, im still studying.
Click to expand...
Click to collapse
Your English is fine. There won't be any problem with different ROMs using sd-ext as each ROM uses it's own folder on sd-ext.
However if you want to use just sd-ext2 for LS then add this to the sdcard: https://www.dropbox.com/s/duln5mz4rux8xkd/rdsfuncts.sh?dl=0 and install as NativeSD.
Stuck in MAGLDR
I installed my HD2 (after using my M7 for over a year now) and cannot get past the boot loader and get stuck at the GO GO GO!
Can anyone help me out.
Already started over again from scratch, but that doesn't seem to do the trick.
Maybe I missed something while it's been a while I have installed a new ROM on my HD2.
Can anyone maybe post a step by step instruction how to install this great ROM and the tools I have to use for it to work ?
Thnaks in advance
your Shortcomings
Hello my dear, I have installed your new Rom (LiquidSmooth KK_10_01_2015 v5.0) Although it has some great features but I faced some problems such as: start up, it takes along time to start. And wi-fi that doesn't open properly. Sometimes when i open settings the settings flash as well as the screen flashes. Also for closing recent apps the screen flashes. V5 sometimes freezes and there is no file explore.you cannot sign in to play store. Mobile network automatically turns off. Finally this version works very slowly in comparing to those Roms I tried before. I love this version, so I hope you to work on it a little more.
hello
Rono1967 said:
I installed my HD2 (after using my M7 for over a year now) and cannot get past the boot loader and get stuck at the GO GO GO!
Can anyone help me out.
Already started over again from scratch, but that doesn't seem to do the trick.
Maybe I missed something while it's been a while I have installed a new ROM on my HD2.
Can anyone maybe post a step by step instruction how to install this great ROM and the tools I have to use for it to work ?
Thnaks in advance
Click to expand...
Click to collapse
first time here been using cwm for years same problem with me instaling on nand with data on ext
nand partition 400mb and ext4 partition 2gb no swap trying to instal LiquidSmooth KK_10_01_2015 v5.0
thanks in advance
welcome
if anyone would like it jakoms User's write it step by step I will be very grateful for your help on how to install htchd2 dokladnom instructions please thanks
witam
if anyone would like it jakoms User's write it step by step I will be very grateful for your help on how to install htchd2 dokladnom instructions please thanks
hello
I can read English moderately and poorly write so I had to rely on translate.google.de. Please for your understanding. A search is schwirig for me since I do not know the words I need.
My problem:
Once I have installed 1.5.2 CLK and the NAND partition've finished I go to recovery and then the picture comes with "Teamwin" (in blue), and again I'm not. What am I doing wrong? see Appendix
If I use 1.5.1.0 RC1 CLK I do come to install but after I confirmed the Accept butts and further geklicht stands there permanently "Please wait".