Related
I have searched google for tutorial but nothing found.
Can anybody tell mme step by step what to do to increase my 528MHz?
Is there any tutorial?
And the final question, would overclocking really speed up Hero?
Hej, it is easy. You can download "setcpu" in xda: search it!
By using this app, you can overclock your Hero easily.
But overcloking seems to make the system sluggish...........(it was very smooth before)
I am using Villian 10.0.0.
voilitation said:
Hej, it is easy. You can download "setcpu" in xda: search it!
By using this app, you can overclock your Hero easily.
But overcloking seems to make the system sluggish...........(it was very smooth before)
I am using Villian 10.0.0.
Click to expand...
Click to collapse
Thx for the answer. So you don't recomend overcloking with setcpu?
No, something isn't right there, using the OCd kernels with SetCPU or OverclockWidget has improved performance of any ROM in my personal experience. Short guide, start of using values of min 350ish - max 650. Play for 5 mins, if ok, put it max setting up by one notch, play again. When it freezes up on you, you know you've gone one too high. You can also test how low u can set the min to save battery. Then start using the profile functions as well.
Mine runs pukka between 350 - 691, others can get 190 - 760.
-------------------------------------
Sent via the XDA Tapatalk App
I think the kernel has to be modified to allow overclocked frequencies..
I am in the same boat, I have the new official ROM, unmodified apart from root and would like to overclock..
Overclock widget shows 528mhz max, I assume SetCPU would be the same.. Is there an update.zip we can flash to have the stock kernel updated to allow the higher frequencies, but no other modifications?
Thanks in advance.
Yes indeed, they need to have a custom kernel. Are you using a ROM from here?... Most have their own overclocked kernels.
As far as I know you still can not take an update zip from one ROM and apply it to another without modifying it,... but I could be wrong. I was told the ramdisk could be extracted from the ROM your using and putting it into the overclocked kernel you want to use, this when the kernels were being made from source. Find out how to do that by searching for a guide on ROM cooking here on XDA.
However now with the official kernel released it might be possible to do it. Give it a bash. NANDROID FIRST!!!!!!!!!!!!
Hey, quick question: I am on mytouch 4g cm7 ROM
What is a safe max to set the overclocking at? Obviously I don't want to burn the chip, but I want to make it as fast as possible. I have LauncherPro, currently my max is at 1.4, but sometimes it lags when I gesture to expand home screens.
I have 7 Home screens, all of them have 1 or more widget..
Thanks
1.5 is a good speed but you really wanna avoid charging when its set that high. so when charging set it to 1.2. Also what Kernel are you using? Defaults on Faux123 ASOP kernel should do well. I'n still on T-Mo stock and i run defaults with Faux123 Sense Kernel and i have no lag at all so CM7 whit its optimized code and no bloat it should run like a dream with one of his kernels, no OC Needed
Edit: corrected Link
http://forum.xda-developers.com/showthread.php?t=957267
Will the Kernel you linked to work with CM7 rc3? It only mentions CM6
Nm, Cm7 is the gingerbread...see it..got it, thanks!
I kept mine at 1.2ghz. Never gave me a problem.
sent from the rooty tooty fresh and fruity cm7 nighly powered G2
So I flashed 2.3.0 , then like the thread says, before rebooting, I flashed 2.4.3 stock version.
However, I am getting a wi-fi error. I saw some posts on it, and they said to "fix permissions". So I did that, yet still seeing a wi-fi error.
So for now, I restored my backup, but I would really like to have this kernel, do you know what I am doing wrong or what I can do to fix it?
Thanks
My mistake i linked the wrong Kernel here you go.
http://forum.xda-developers.com/showthread.php?t=957267
Yeah, I did use that link, however as described above, the wifi is giving me an error..any idea of a fix or what I am doing wrong?
I was getting the same issues. Then I reflashed the rom, rebooted before turning wifi on and had no problems. Also have had no problems set at 1.75 max and .75 min on minmax. Have been using that setting since faux started making his kernels (cm7 amd froyo based) and have never froze once. Quadrant scores for the new evil dhd ext 4 rom at 2900.
Sent from my HTC Glacier using XDA App
First, I would acknowledge the great work HCDR has done !
With that done, I would like to resolve some of my doubts.
I just flashed CM7 and then 4.1 kernel of HCDR.Jacob.
SetCPU allows me to set max CPU speed of 768.. I keep it at 691 with on-demand scaling, but it automatically reverts back to 591 over a period of time.
Can anyone tell me why this happens ?!
Also, any insight on how this modes work would be appreciated.
If I want to manually want to force my phone to operate at a certain speed, how do I do that ?
Thanks,
P
If u are using CM7 why are using SetCPU?
CM7 has it's own OC settings features.. settings>> cyanogenmod settings>>>performance>>>cpu settings
Sent from my HTC Wildfire using XDA Premium App
Why are you flashing HCDR kernel? It's not necessary to do that anymore in CM7.
arco68 said:
Why are you flashing HCDR kernel? It's not necessary to do that anymore in CM7.
Click to expand...
Click to collapse
Thanks. I did not know that.
Is there anyway, I can revert back to original CM7 kernel. Coz I already flashed that kernel. Does it even make a difference ?!
One more thing, what CPU governor should be chosen ?!
I would want my phone to be auto-OCed when I play games but DCed when idle.
Would "on-demand" be a good choice ?! Or "smartass" is better ?
pulz said:
Thanks. I did not know that.
Is there anyway, I can revert back to original CM7 kernel. Coz I already flashed that kernel. Does it even make a difference ?!
One more thing, what CPU governor should be chosen ?!
I would want my phone to be auto-OCed when I play games but DCed when idle.
Would "on-demand" be a good choice ?! Or "smartass" is better ?
Click to expand...
Click to collapse
smartass. its smart.
Eddster3000 said:
If u are using CM7 why are using SetCPU?
CM7 has it's own OC settings features.. settings>> cyanogenmod settings>>>performance>>>cpu settings
Sent from my HTC Wildfire using XDA Premium App
Click to expand...
Click to collapse
In CM7 RC2 this option is not available. This is why i using setCPU app too.
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
I'm running the rooted Gingerbread v2.3.4 with S-OFF. I purchased and installed SetCPU from the market thinking I could overclock. Everything appears to be capped at 1 GHz. Maybe I have misunderstood the capabilities of SetCPU? Do I need to install a different kernel to overclock?
you would have to flash a different kernel to be able to overclock past 1ghz. since youre using Sense, Id recommend Darkside SENSE v7
OK. How would I go about backing up my current kernel or if I wanted to revert back, would I just reflash the original ROM?
Yes, back up the whole ROM, and revert to it if different kernel won't work.
Do the backup in recovery.
Sent from my HTC Glacier using XDA App
Thanks for the help.
I've been researching the one mentioned kernel as well as some of the other options. I'd really like to know what your opinions are on thederekjay's v2.6.35.14 demonspeed v7 kernel vs. faux123's v0.0.9? I'm wanting to keep as close to stock as possible - I'm just looking for the ability to overclock. Are there any others I should be looking at?
I'd go with the Darkside kernel. Its newer and you can use apps like incredicontrol or OC/UV beater to undervolt it. No offense to faux. He makes a great kernel. I just had better success with Derek's kernel.
Sent from my HTC Glacier using XDA App
SJMarty said:
Thanks for the help.
I've been researching the one mentioned kernel as well as some of the other options. I'd really like to know what your opinions are on thederekjay's v2.6.35.14 demonspeed v7 kernel vs. faux123's v0.0.9? I'm wanting to keep as close to stock as possible - I'm just looking for the ability to overclock. Are there any others I should be looking at?
Click to expand...
Click to collapse
go with demonspeed v7, its more updated and probably has a lot less bugs/more optimizations than Faux's because I dont think he devs for the mt4g anymore, so there hasnt been any updates. You can also try out the UNITY kernel by the Virtuous Team, great kernel as well
aznprodgy said:
You can also try out the UNITY kernel by the Virtuous Team, great kernel as well
Click to expand...
Click to collapse
I'm having trouble locating this kernel by itself. If anyone has a link, that would be much appreciated. I can only find the entire ROM. Also, in the technical notes, I read this...
Virtuous overclocking daemon will automatically be disabled if an overclocking tools (such as SetCPU or CPU Tuner) is installed. Installing these tools is not advised, as the virtuous_oc daemon responds far more rapidly to screen state changes than any Android (Java) application.
Click to expand...
Click to collapse
I'm not familiar with the virtuous_oc daemon but it sure sounds like what I need to use. Any experiences with this vs. SetCPU?
http://db.tt/BIrgOHsk
Found a link to Unity v10 in the Unity v9 thread. Lol.
This is for the daemon:
http://forum.xda-developers.com/showthread.php?t=1214103
This is the app to adjust the daemon's settings as well as voltages:
http://db.tt/BybdGlvK
Forget setcpu with this setup.
Sent from my HTC Glacier using XDA App
estallings15 said:
http://db.tt/BIrgOHsk
Found a link to Unity v10 in the Unity v9 thread. Lol.
Click to expand...
Click to collapse
Thanks for the links. I gather from the kernel filename, virtuous_kernel_comb_v10_from_beta2.zip, that v10 is still in beta? I think I read that v10 development has been abandoned. Is that your understanding? I certainly could be wrong. I've read so many threads in the last few days my eyes are crossing!
Not sure. I never really used unity, as I wasn't in the mood for sense for about a year. Don't be afraid of a beta kernel. If you don't like it, just flash v9.
I hate to be a turd, but if you could hit the thanks button I'd be... Thankful. Lol
I only have 4 because I don't push it. BTW, you can PM me anytime. I'll help if I know how.
Sent from my HTC Glacier using XDA App
I'm using unity kernal seems too do good. My battery lasts two whole days. But might try demonspeed . Thanks