Database Users

Using flash_image to upgrade recovery partition failed... now what?

Hello folks,
First time poster here, first time I haven't been able to find a fix already posted...
Anyway, I wanted to try out the new Cyanogen mod after not having tried any new ROMs in a long time. Got 5.0.7 installed and running no problem. Then I noticed on the Cyanogen Mod site that there was also a Cyanogen recovery image. "Might as well have everything from the same source," I thought. I got the file, put it on the SD card, and used the terminal on the phone to execute "flash_image recovery /sdcard/cm-recovery-1.4.img," then tried rebooting into recovery mode. No good. Just get hung up at the "myTouch 3g" screen. At this point, I thought I was well and screwed, but fortunately I'm still able to boot normally.
Tried reflashing the same image, then other recovery partition images. No dice. Where do I go from here? I'm used to fixing stuff I've screwed up through the recovery partition, not the other way around!
I appreciate any help or advice!
Sincerely,
Tom

hey tom,
this will fix you up:
install "rom manager" from the market
flash his recovery image (theres in option for that)
then look for the option that lets you flash Amon Ra 1.7.0
let it load, power off & then check.
trust me this is bound to fix your problem.

[Q] myTouch 4G Recovery Issues! Please Help!

I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!

highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.

Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.

Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!

I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/

fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.

A little help.. I400

aSo heres my issue. I installed Rom manager and when I try to apply update.zip it says its not found. So I found a update.zip that was supposed to be for the continuum put it in the root of the SD card then reboot in recovery mode. It applied the update.zip but now when I try to reboot into recovery mode I get stuck there. I have to take the battery out over and over. Any ideas? I cant flash any other roms or do any backups because I get stuck at the recovery screen..

What kernel do you have installed?
Sent from my SCH-I400 using XDA Premium App

Stock kernel.. Everything is stock.

What update.zip did you download?
Sent from my SCH-I400 using XDA App

^ that... did you use the one from the post on this forum?
Also, is your recovery stock also? Because that would be why........
Sent from my SCH-I400 using XDA Premium App

The recovery I was using is Clockworkmod, and the update.zip file that I used was from a website I cant remember right off the top of my head but it said it was specifically for the I400 Continuum. I was unaware that there was an update.zip in this forum. As of today I've uninstalled Clockworkmod and deleted update.zip from my SD card. As long as I dont go into recovery the phone shuts down and reboots just fine. But if i go into recovery it gets stuck there and I have to take the battery out a few times to get it to reboot.
P.S. you help with this is greatly appreciated as I am very new to the Android platform. I have a lot of experience modding and flashing roms in WM6 but none with Android.
Thanks,
Justin

what screen does it get stuck on? have you even flashed odin yet?

Lets make this easy.. Is there a post in this forum that gives all the files and step by step instructions on how to install the recovery and do the flashing?

YAY! I got it figured out. All is well! Thank you guys for your help. I think we can consider this case closed.
Thanks again,
Justin

Ok maybe not... I got through the recovery but now when I try to flash in CWM it aborts the installation and says this:
-- Installing: /sdcard/DL17_clean.zip
Finding update package
Opening update package
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was depreciated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockWorkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
Any ideas?

Download the update.zip from the thread with the CWM kernel and replace the one on your SDCard. I'll get CWM 3.x out eventually then as well, as soon as I have some time to test it and get the few mods out there updated to edify.

Id love to but now its stuck at the 'samsung' screen. when I try to apply the backup that I just made it says:
ClockworkMod Recovery v3.0.0.8
Checking MD5 sums...
Erasing boot before restore...
Error while erasing boot image!
When I try to reboot it just gets stuck at the 'samsung' screen again.

Setup ADB on your computer and download the update.zip from the CWM thread in the Development forum. Open up command prompt and navigate to the directory where the update.zip is located. Boot into Recovery and plug your phone into your computer. Then run "adb push update.zip /sdcard/update.zip". After it finishes pushing, reapply the update.zip and you should be in CWM 2.5.x again. The reason you can't boot past the Samsung screen is because, based on your other thread, CWM 3.x that you tried to use wiped the kernel partition, so it has nothing to boot too. Until you get CWM 2.5.x back, you can't flash anything here via CWM without changing it over to edify scripting.

It says "device not found" Should I be in the stock recovery or CWM? Meaning should I apply update.zip on the phone or no?

You should be in CWM. If it's still not working, you'll need to get an ODIN package that has the kernel in it to flash. I'd post one, but I'm at work and can't put one together.

Yeah it still isnt working. Hey I appreciate all your help I understand you are working. Ill leave it alone for now but if (when you have time of course) you could put that together I'd be beyond grateful. If its as easy as flashing with odin and having the right CWM to flash the DL17 then I think I can handle that but if there are further, more complicated steps to correct this then I may need your assistance further.
Your help is greatly appreciated,
Justin

Continuum BRICKED
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO?????????
I NEED MY PHONE!!
PLEASE HELP.

angryuserwhosephonehates. said:
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO??????
Click to expand...
Click to collapse
Wait in Irc. Txwolf1980 is the resident fixer. But clarify what exactly you have done flashing wise. Read the sticky tread about bricked device. All of them.
And what's Brock screen?
Sent from my SCH-I400 using xda premium

angryuserwhosephonehates. said:
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO?????????
I NEED MY PHONE!!
PLEASE HELP.
Click to expand...
Click to collapse
Ok. 1. What froyo file were you trying to flash?
2. At what point did it fail?
3. You say you outfit in DL mode, andvitvwent to CWM. On its own? I'm not sure that's possible. Please clarify
4. You say it now goes from download to black screen "really fast". Again, clarification.
5. Ifvyou have downloaded mode, and drivers, we can get a read in odin. It may take a few tries. When you say you don't have cwm, do you have stock recovery? When will you have an hour or so to get into IRC?

Clockwork recovery won't boot nexus s

Hey guys
I'm having an issue booting into clockwork recovery. and i'm having even more of an issue finding the answer, I'm pretty sure that someone is gonna come up with a thread which already answers my Q, I just don't know enough of the terms to search sorry
I've followed instructions here in Kursks walk through to unlock my loader, install super user and install clockwork mod etc.
Clockwork mod and super user are now fully upto date.
I've managed to do a backup of my current rom using clockwork mod.
I have also managed to get the phone to boot in to clockwork recovery from within the android app. But only once.
when ever i now try to do a backup, reboot into recovery, or boot to loader menu and select recovery it always fails.
I get the image of a box with the arrow next to android, then after a few seconds the box and arrow turn into a triangle with "!" inside it.
I'm probably making a rookie error here, but I'm having trouble finding the answer.
Thanks in advance for any help you can offer.
Matt

Yetidragon said:
Hey guys
I'm having an issue booting into clockwork recovery. and i'm having even more of an issue finding the answer, I'm pretty sure that someone is gonna come up with a thread which already answers my Q, I just don't know enough of the terms to search sorry
I've followed instructions here in Kursks walk through to unlock my loader, install super user and install clockwork mod etc.
Clockwork mod and super user are now fully upto date.
I've managed to do a backup of my current rom using clockwork mod.
I have also managed to get the phone to boot in to clockwork recovery from within the android app. But only once.
when ever i now try to do a backup, reboot into recovery, or boot to loader menu and select recovery it always fails.
I get the image of a box with the arrow next to android, then after a few seconds the box and arrow turn into a triangle with "!" inside it.
I'm probably making a rookie error here, but I'm having trouble finding the answer.
Thanks in advance for any help you can offer.
Matt
Click to expand...
Click to collapse
Reflash clockworkmod recovery via fastboot.
Sent from my Nexus S using XDA App

Hi and thanks for your reply
well i reflashed clockwork mod and selected to reboot into recovery, and that worked fine
I then booted back to android, selected a rom to DL and install, and got the same issue again
re-flashed again, selected a rom to install and that appears to be working
Do you have to re-flash clockwork recovery everytime? or is mine doing something weird?
Thanks again for your reply
Matt

Yetidragon said:
Hi and thanks for your reply
well i reflashed clockwork mod and selected to reboot into recovery, and that worked fine
I then booted back to android, selected a rom to DL and install, and got the same issue again
re-flashed again, selected a rom to install and that appears to be working
Do you have to re-flash clockwork recovery everytime? or is mine doing something weird?
Thanks again for your reply
Matt
Click to expand...
Click to collapse
You are wwelcome .
You are dowbloading roms via rom manager?
Sent from my Nexus S using XDA App

There is a file you must delete or rename to make cwr stick
Sent from my Nexus S using XDA Premium App

osugsxr said:
There is a file you must delete or rename to make cwr stick
Click to expand...
Click to collapse
Code:
/etc/install-recovery.sh

I'll ask aswell.
Clockwork recovery won't stick for me either. I9023.
I don't have the /etc/install-recovery.sh anywhere. Looked and searched via root explorer. No files whatsoever called install-recovery.sh. On CM7.
Can anyone give me any tips?

Downgrade to older clockwork via Rom manager . I've had that problem it makes no different and it works fine

Thanks guys I think you've managed to sort me out

[Q] mja wont boot into android or recovery!!

i really need help as ive searched around and have had no luck. my phone wont hold stock tar flash and i cant boot into android or recovery, i believe i need to wipe data but without recovery i dont know what else to do. have tried flashing several custom recoveries. no luck. stuck with a blue "booting into recovery" message and hangs up. any help would be appreciated. thanks

Download the new TWRP and flash
fearthemarchx said:
i really need help as ive searched around and have had no luck. my phone wont hold stock tar flash and i cant boot into android or recovery, i believe i need to wipe data but without recovery i dont know what else to do. have tried flashing several custom recoveries. no luck. stuck with a blue "booting into recovery" message and hangs up. any help would be appreciated. thanks
Click to expand...
Click to collapse
Download the new TWRP recovery and flash using Odin 3.x in the PDA tab.
You can google new TWRP rec links

M星空 said:
Download the new TWRP recovery and flash using Odin 3.x in the PDA tab.
You can google new TWRP rec links
Click to expand...
Click to collapse
i tried that no luck. only recovery to stick and boot its philz. so at this point, ive tried odin mja,mk2, and nae. and recovery flash them as well. no luck. maybe bad downloads?

sorry
fearthemarchx said:
i tried that no luck. only recovery to stick and boot its philz. so at this point, ive tried odin mja,mk2, and nae. and recovery flash them as well. no luck. maybe bad downloads?
Click to expand...
Click to collapse
Sorry,I don`t have better idear.