hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... then turns off ... then loads again then turns off ... so annoying
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) after reboot i went to "BOOT AD SD"
5) booted rom from CWM
6) everything went good ... got past go go go! then is just stopped at the android logo
laulakh said:
hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... but then it just stopped and didn't do anything
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) run Daf.exe
5) after reboot i went to "BOOT AD SD"
6) everything went good ... got past go go go! then is just stopped at the android logo
Click to expand...
Click to collapse
Is your AD SD Boot Dir set to the root ( >.< in the menu) of your SD Card? If not, try reflashing MAGLDR...
Maybe you want to tell us what build you used?
Sent from my HD2 Glacier using XDA App
New problem
thank for the quick post
sorry i should mentioned it I'm using the JDMS Ultimate on HTC HD2 rom
http://forum.xda-developers.com/showthread.php?t=782301
however i figured my earlier problem now im running into something else
i didn't use the "initrd.gz" and "zImage" from CWM
NEW problem
After rebooting with CWM android boots up then turns off and then it boots up from nand and turns off again ... this will keep on looping until i take battery out
I re flashed Magldr but it did the same thing ... im going to reflash HSPL then try again ... but i followed all the direction from the following thread and dont see where i went wrong
http://forum.xda-developers.com/showthread.php?t=898913
GOT IT!!
thanks ... kinda to hose who helped...
I used CWM 1.0 instead and everything worked fine...i also used the the Jaws-MIUI rom
thanks RaiderX303
Ill probably kill this thread soon if oneone posts one but but the questions I had were answered by looking around I was just too lazy at first
hi need help
can not install the Clockwork Mod Recovery On The HD2 when i restart on the MAGLDR only on 2.Boot AD NAND what do need help!!!!!!!!!!!
cant reboot form BOOT AD SD only on Boot AD NAND need help?????
on the AD SD Boot Dir set to the root ( >.< in the menu) which one i select it have <,> AAlic*1,dcim,mydoc*1,WMDRM,TRANSF*1,XDA_UC,GAMELOFT,MULTIM*1.APP,PROGRA*1??????
hope this not way off i am still totaly new at this but , just went trhough something similar with a bad nand install and kept rebooting to quietly brillant, not sure where i found my answer now but hold down the power button after you boot to get to default main magdlr screen where you will be able to make the changes you need then maybe reflash your rom
If it keeps looping over HTC white screen and the 1234 GOGOGO MAGLDR screen then take out your battery and push the battery pins back. They could be loose.
This also happened to me, my i only option and solution was: press hard-reset button on backside so it wont be stuck on the andriod logo and go back to the store and be really nice to the salesman so he would send it back to htc.
I'm currently having issues resulting in this same issue. I've tried mutiple different Roms aswell as using some SD roms in the hopes that I would fine a build suitable for my phone but I always end up getting bad results.
My previous NAND Rom worked fine for all of about 5 hours before I started getting freezes, restarting and constant boot loops along with massive battery drains.
Currently running the below ROM and so far, it's been the most reliable (going almost 12hrs without a hitch) but this morning I found it sat on the little blue android man screen. Had to do a battery pull and switched the phone back on, only to end up on the same screen again. I've left the phone for a fair period of time between each battery pull (probably around 30mins) but still get the same thing.
http://forum.xda-developers.com/showthread.php?t=967353
Any idea's on how to fix this? Ideally I'd like to keep the same build I have now as its a really nice build... I just can't seem to get anything running properly.
Seem to have got it working again. Did a battery pull but left the battery out for a good 20mins before putting it in. Booted up first time and it seems to be working fine now.
Hi ,
i'm from Android and i want to install WP7 on my HD2 but , first time i have a boot looping , i updated the rom radio , it's okay i run WP7 , used about 20 minutes, i want to sync with zune and i don't view my SD Card
I reboot , and since this time , i have only boot looping , i perform a Task29 + RADIO + MAGLDR + WP7 (All the rom possible) i always have this fuc**** bootlooping ...
Oh , when the phone is heat i have a big freeze (All roms / all radio / all magldr) , i want to learn to this phone to fly ....
How to fix all problems ?
Thanks you
Sorry for my bad english :/
EDIT : My SD Card is a new 16Gb Class4
makz27 said:
Hi ,
i'm from Android and i want to install WP7 on my HD2 but , first time i have a boot looping , i updated the rom radio , it's okay i run WP7 , used about 20 minutes, i want to sync with zune and i don't view my SD Card
I reboot , and since this time , i have only boot looping , i perform a Task29 + RADIO + MAGLDR + WP7 (All the rom possible) i always have this fuc**** bootlooping ...
Oh , when the phone is heat i have a big freeze (All roms / all radio / all magldr) , i want to learn to this phone to fly ....
How to fix all problems ?
Thanks you
Sorry for my bad english :/
EDIT : My SD Card is a new 16Gb Class4
Click to expand...
Click to collapse
Try to reset device (vol up+vol down on the "Booting WP7 123456 GOGOGO!" screen) without an SD card and see if the loop stops. If it does, get another card If it doesnt, you probably did something wrong
After a long time without battery , windows start normally, i've insert the card into the phone , but no sd card in windows oO
bootloop is a common issue with a SD card that isnt supported, try formatting it in a digital camera, if that doesnt work, try a new SD card
ITS SEEMSa that in andorid exist rom that we can flash , and after flash the screen boot dont show the Magldr 1.13 screen boot ,like " LOAD 1234 GO GO GO " ~the phone go direcltly to main screen . and we can recharge the battery while phone is OFF . this way prevent the bug when the battry is complety drained and after that we cant recharge because the phone boots when detect the usb power .
i cant find the link from andorid that i seen that utility !!
sorry my bad english "!"!:=)
you are talking about CLK its a different boot loader to magldr and they work differently to each other
and the developer of cLK is not intrested in WP7 so he won't be making a version booting WP7 on HD2 any time soon.
Hi , i'm new in this Forum and can't find a working answer for my Problem , so i open a new thread.
I have "htc hd 2" and i used windows mobile 6.5 till yesterday. Then i had the wich to change to an android system cause i like the style and ts3 app, whatsapp, etc.
So i read some guides how to run android on my phone.
First i tryed to run "Android 4.0 Ice Cream Sandwich" i put it on my sd card and started the haret.exe the first 3 time is started the exe , my phone shut down and restarted with no comment , the fourth try the android system started and i was able to use it as a normal system. I thought now my handy is android, but when i started it again today there was the normal windows system. So i read more guides , how to boot from my sd card.
in the following i got some programms and installed it as the guide said.
First i installed "HardSPL 2.08"
as second "2.15.50.14 Radio"
till here everything worked well without errors but then i should install
"MAGLDR 1.13" , installation goes on 100% then finish , but i can not open magdlr, everyone says "press the power button until magdlr opens" but i press it 5 minutes long and just hang on the white screen with the green htc letters. i can do nothing , i tryed reinstallation and nothjing happens , and the other problem is, that i cant put any roms on my sd card , cause the pc doesn't find the phone and so i cant open the card.
If you have tips for me or questions, just post it i try to answer as fast as possible , i need my phone
[sry for my english dont flame please, i'm just a german ]
stormshard said:
Hi , i'm new in this Forum and can't find a working answer for my Problem , so i open a new thread.
I have "htc hd 2" and i used windows mobile 6.5 till yesterday. Then i had the wich to change to an android system cause i like the style and ts3 app, whatsapp, etc.
So i read some guides how to run android on my phone.
First i tryed to run "Android 4.0 Ice Cream Sandwich" i put it on my sd card and started the haret.exe the first 3 time is started the exe , my phone shut down and restarted with no comment , the fourth try the android system started and i was able to use it as a normal system. I thought now my handy is android, but when i started it again today there was the normal windows system. So i read more guides , how to boot from my sd card.
in the following i got some programms and installed it as the guide said.
First i installed "HardSPL 2.08"
as second "2.15.50.14 Radio"
till here everything worked well without errors but then i should install
"MAGLDR 1.13" , installation goes on 100% then finish , but i can not open magdlr, everyone says "press the power button until magdlr opens" but i press it 5 minutes long and just hang on the white screen with the green htc letters. i can do nothing , i tryed reinstallation and nothjing happens , and the other problem is, that i cant put any roms on my sd card , cause the pc doesn't find the phone and so i cant open the card.
If you have tips for me or questions, just post it i try to answer as fast as possible , i need my phone
[sry for my english dont flame please, i'm just a german ]
Click to expand...
Click to collapse
do this simple process =-)
put your screen in bootloader mode( volume down+power)
task 29
reinstall magdlr
get a compatible recovery and flash via usb flasher
boot into cwr via ad recovery
move rom in to sd card via mount usb
and voila
good luck
Hi , bootloader modus (the red , green , blue , white , screen) ist activated , where can i find "task 29" ?
thx , for the fast answer
stormshard
EDIT: Okay, i got the htc hd 2 rom from htc.com , and will install it now , to recover my phone , then i will try the android upgrade again ... hmm , any tips ?! i want the same android that i used yesterday ^^
EDIT -2: I installed the NAND toolkit , where i found the task29 ^^ and a guide how to install android 4.0 sandwich , lets see if it works
I've written a guide that will help you through these processes. The link is in my signature if you're interested.
Sent from my HD2 using xda premium
Nice guide, but the "download drivers" button in the toolkit directs me to "megaupload.com" and this site is seized by an U.S. court...
is there another way to get these drivers ?
edit: And another thing is , you want me to install hspl 2.08 but i already have 3.03. .... what to do ?
edit , second: Now CLK is installed it worked with hspl 3.03 , now i the blackscreen from clk 1.4.0.1
it says:
[2460] ptn 0 name=..........
[2460] ptn 1 name=..........
[2460] ptn 2 name=..........
[2460] ptn 3 name=..........
[2460] ptn 4 name=..........
[2470] ptn 5 name=..........
[2470] USB init ept @ 0x28023000
[2510] fastboot_init()
[2510] udc_start()
[2510] -- suspend --
[2650] -- reset --
[2650] -- portchange --
[2680] -- reset --
[2680] -- portchange --
[2770] STALL GET_DESCRIPTOR 128 6 1006 0 18
The last line should be "Fastboot: Processing Commands" but i cant get the drivers from the toolkit , because the linked site is off
EDIT third:
I found via google.de the driver package and got it installed , now i have the line :
[1501490] fastboot: processing commands
[1504220] STALL GET_DESCRIPTOR 128 6 3840 0 244
I will go one following the guide at step 14.
New Problem in step 19:
when my hd2 reboots , it doesnt switch to CWM recovery if i hold the home button pressed, it start clk again, Whats now ?
LOL , i pressed the false button Sooo lets go on
The first guide was succesfull , CWM installed
So i go one with the second guide , step 1 - step 14 without problems , but after my rom was installed and i press in step 15 "reboot system now" it reboots but it starts clk ?! and stops there i think ...
Any tips ?!
I reinstalled my rom.zip , it was successfull , but again when i pressed "reboot system now" it shut down , and when it turns on it shos for a few second the white screen with green htc letters and changes to the CLK window
i think i'm so close to have android on this phone .... PLEASE HELP !
I will look to see if I still have the drivers on my computer and can upload them since megaupload is shut down. As for now, just scroll down to post 3 and install clk 1.5, its by far the easiest. Put on SD card and hold volume down + end key and then Viola done! I have an almost complete magldr guide on my website as well.
Sent from my HD2 using xda premium
stormshard said:
New Problem in step 19:
when my hd2 reboots , it doesnt switch to CWM recovery if i hold the home button pressed, it start clk again, Whats now ?
LOL , i pressed the false button Sooo lets go on
The first guide was succesfull , CWM installed
So i go one with the second guide , step 1 - step 14 without problems , but after my rom was installed and i press in step 15 "reboot system now" it reboots but it starts clk ?! and stops there i think ...
Any tips ?!
I reinstalled my rom.zip , it was successfull , but again when i pressed "reboot system now" it shut down , and when it turns on it shos for a few second the white screen with green htc letters and changes to the CLK window
i think i'm so close to have android on this phone .... PLEASE HELP !
Click to expand...
Click to collapse
I bet you didn't flash a clk kernel!. download the proper clk kernel for rom
ok so you have hspl 2.08, radio 2.15.50.14, you task 29 the phone, installed clk thru the toolkit, repartitioned it to the proper partition size for the rom, (ics is about 200-220mb with 5mb cache) installed clockworkmod recovery , before you flash your rom check the md5 checksum to make sure you have a good downloaded rom, if you don't have android sdk/adb installed on your pc, redownload your rom just to be safe. once you boot into clockworkmod recovery, choose install from sd, choose from sd, and select zip, after flashing rom, flash your clk kernel zip, once is done youll reboot system now and shouldn't see clk when booting up.
stormshard said:
New Problem in step 19:
when my hd2 reboots , it doesnt switch to CWM recovery if i hold the home button pressed, it start clk again, Whats now ?
LOL , i pressed the false button Sooo lets go on
The first guide was succesfull , CWM installed
So i go one with the second guide , step 1 - step 14 without problems , but after my rom was installed and i press in step 15 "reboot system now" it reboots but it starts clk ?! and stops there i think ...
Any tips ?!
I reinstalled my rom.zip , it was successfull , but again when i pressed "reboot system now" it shut down , and when it turns on it shos for a few second the white screen with green htc letters and changes to the CLK window
i think i'm so close to have android on this phone .... PLEASE HELP !
Click to expand...
Click to collapse
Make sure you're installing a clk rom. Some clk roms are completely clk, like you flash it and your done. But others are magldr roms and a clk patch (usually called kernal) in this case you flash Tom then flash patch then reboot
Sent from my HD2 using xda premium
The site where i got this android rom is for both clg and magldr , i got both the rom and the kernel , and put both on sd card , with cwm and installed both then reboot , but again i stay in this clk window and nothing happens
OH MY GOD OH MY GOD , call me master omfg , YEA it works ! , i love xda !!! great guides , thx for your help kylew1212 and roloracer , i am soo happy , you cant imagine
cya , stormshard
first press claret and then click on haret it should load fine good luck
msmkt said:
first press claret and then click on haret it should load fine good luck
Click to expand...
Click to collapse
he said it on the op where he was using clk nand rom not sd, so there's not clrcad or haret to select .....
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
that doesnt sound good, can you get the magldr boot menu to load?, hold down call end from when you turn it on
Do the volume buttons work there?
can you get to the tri coloured bootloader at all?
sounds kinda serious, if possible id want to SD flash a stock WM6 ROM, SD flash because it would overwrite the SPL, which may be buggered, course 1E can be a memory address which is deffinitely not good :/
Raviteja894 said:
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
Click to expand...
Click to collapse
with UltraFruit ROM restarts is because problem with multitouch driver..
also try remove battery and wait one minute, put back battery and try boot now...
if you want reinstall WP7, no need to flash WM6.5
simply use NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
install, run...
1. use Task29 and flash it (this will be formatted NAND memory)
2. use MAGLDR and flash it
3. flash WP7....