Related
I have done a lot of reading and research and non of them worked for me or there could be sth I dun understand.
I have installed the certificate, make sure only wifi is on, then plugin the phone and wait for zune to pop up. Than run ChevronWP7. When I click unlock, it does not unlock the phone.
Also, all the sideloaded apps including XBMODDeployer.xap and TouchXplorer.xap is not working. I'm receiving a message that it got revoked and wants me to uninstall the app.
Will not consider hard reset unless that's the last option.
Please help out! Thanks
Many Microsoft Apps kill the Chevron Unlock, but it should be no problem to unlock the device again.
Also I had spend 8 hours in trying to unlock WP7, until i found out, that Skype block the Chevron tool.
Install the certificate and connect the phone with zune when Wifi is OFF! Then unlock your phone. I would say it would be better to unlock the phone only to deploy the config file and change the phone information to hd7. Because everytime you connect to zune it relocks again.
Manual for activating: http://forum.xda-developers.com/showthread.php?t=928695
Thanks for all the reply. However I still have not find the reason why my phone cannot be unlocked. I do not have skype installed, but I will try uninstalling other apps and see what I can get.
SOrry I didn't make it clear earlier. When I said wifi on, I mean wifi on only for laptop, not the HD2.
I'm also wondering, from the tutorial I've read. In order to sideload app I need to have Zune running. Is there a way to sideload app another way?
Silberpfeil3110 said:
Install the certificate and connect the phone with zune when Wifi is OFF! Then unlock your phone. I would say it would be better to unlock the phone only to deploy the config file and change the phone information to hd7. Because everytime you connect to zune it relocks again.
Manual for activating: http://forum.xda-developers.com/showthread.php?t=928695
Click to expand...
Click to collapse
Not anymore, you can do an easy fix (with out reg edits, or install adv config and edit reg) See top of forum page
hairsup said:
Thanks for all the reply. However I still have not find the reason why my phone cannot be unlocked. I do not have skype installed, but I will try uninstalling other apps and see what I can get.
SOrry I didn't make it clear earlier. When I said wifi on, I mean wifi on only for laptop, not the HD2.
I'm also wondering, from the tutorial I've read. In order to sideload app I need to have Zune running. Is there a way to sideload app another way?
Click to expand...
Click to collapse
Have a look at the sticky thread, honestly all the unlock info is there. If you follow the good guides there EXACTLY, you will not have a problem. Dont rush it bro and all will be well.
Hey. I'm really curious here. Reading through the registry tweaks there were mentions of the registry field you have to edit to enable developer mode, and to stop checking with the server and reverting to original state, and also to control how many dev apps you're allowed to have installed.
Now...that's all fine and dandy. But what I'm really curious about is if with a phone like the LG Optimus 7 (E900h) which gives full 100% registry access through the engineer menu, couldn't you just modify those settings and be unlocked without going through the chevron process?
I already unlocked my phone. I'm not having any problems with it. But I did the Chevron method before thinking about this option and I'm really curious if anyone is able to shed some light on this question.
Thanks much!
So NoDo was finally released this morning.
Well, for the EU people anyway (don’t get me started).
Windows Phone 7, by default, stores your operator identifier in a sneaky registry key, which is checked by the Windows Update Client running on the phone. This identifier is then used to check if the updates have been approved for your operator. If they are slow, like Telstra here is in Australia, you’re going to be waiting a long time.
So, let’s tell you how you can “un-brand” (this won’t remove the boot splash screen) your phone so it appears to be a generic handset to the Update Servers.
Your device needs to be dev-unlocked for this to work. Sorry folks.
1. Download this zip file and deploy the 3 xap files onto your device.
2. Run the ChevronWP7.Ringtones.xap and wait till it displays “Ringtones added… and CustClear.provxml underneath”
3. Run the TouchXplorer app, navigate to My DocumentsMy Ringtones click on CustClear.provxml and select Copy from the Application Bar.
4. Navigate back inside TouchXplorer to the Windows folder.
5. Select paste from the Application Bar, this should scroll right to the bottom and put a copy of CustClear.provxml in the Windows folder.
6. Now run the Connection Setup application and click on the Ok button (it’s the one with the tick).
And now you’re done and free to re-connect to Zune and check for updates.
Again, this is ONLY for HTC devices.
Click to expand...
Click to collapse
Source: http://blog.walshie.me
Hi guys! I didn't test this method for HD2 yet cause I still on Android. Try it out.
Has this been cooked for the HD2 already? I'll give it a try as long as I know it won't brick my HD2
IT ONLY SHOWS PHONE UPDATE FEB 2011
any idea why i am not able to see nodo update
There is another thread about this already in Q&A and General. It seems as though this method is for native WP7 devices to work around zonal or carrier based restrictions.
It has been tried on an HD2 in the other thread and the same registry issues that affected the February update prevail. This does not appear to be a solution for HD2 owners.
just tried out and still having the error happening same error
stricklanddoyle said:
just tried out and still having the error happening same error
Click to expand...
Click to collapse
Do you have an 7008 already? Is your HD2 identifies like hd7?
Gustopher said:
There is another thread about this already in Q&A and General. It seems as though this method is for native WP7 devices to work around zonal or carrier based restrictions.
It has been tried on an HD2 in the other thread and the same registry issues that affected the February update prevail. This does not appear to be a solution for HD2 owners.
Click to expand...
Click to collapse
Yeah, this tread can be deleted, seems to be not working for hd2 in any way.
i have big problem my phone is locked ... and i cant unlock it since they disconnected the unlock tool what should i do guys
okay okay i fixed the unlock thing and everything and did this but this didn't work out on hd2 .. ill try more and let ya know guys
Yea, just playing around, problem is in registry.
hello,
do you know if it works on HD2 ? if I try, will I keep everything (sms, apps, ...) ?
thanks !
This does not work, it has been said hundreds times
Has everybody been taking crack lately?
How do you expect to be able to do a official update to NoDo when our roms are modded to work on the HD2, its not a native rom so even if you could get it to update through official channel it would very likely break the installation anyway.
Use some common sense guys have some patience and wait for the update to be cooked into HD2 rom.
In case anyone was having trouble finding the info, I just thought I would put everything together and make it easy. Sorry if im re-posting anyones info, just seemed a bit spread out. Obviously anything you do is at your own risk, but if you follow it to the letter, you cant go wrong.
I can confirm all of this works.
And as far as the unlock, I didn't unlock my phone until AFTER I got NoDo. And yes, it DOES stay unlocked. Ive already tested, and obviously because of that, side-loading still works as well. You wont need the chevron unlock program anymore, plus it doesnt seem to be working well for alot of people now anyways since NoDo, but the Chevron Ringtone Manager works GREAT without that once you go through the process. Just leave out the part about the Chevron7 unlock tool.
LG "debranding" hack
1. Enable the MFG application by going to the dialer and dialing ##634# then pressing call.
2. Launch the MFG application and enter 277634#*# when prompted for a password.
3. Select the Engineer Menu item.
4. Select the Other Setting menu item.
5. Select the Edit registry menu item.
6. Set the input boxes on this menu as follows:
Select ROOT_PATH: HKEY_LOCAL_MACHINE
Input SUB_PATH: \System\Platform\DeviceTargetingInfo\
Input KEY: MobileOperator
Data Type: STRING
Input DATA: It is blank, but instead of leaving a blank, put in an empty space. As in actually hit the space key once.
Also, if you want to re-brand your phone after the update for AT&T your input should be ATT-US
7. Select Query and write down the result in case you need to re-brand for some reason.
8. To debrand just enter the same information above and leave the input data field blank. The tool will say fail but it really did set correctly.
You can now connect to Zune and check for updates.
How to Un-Lock your Phone without Chevron 7
You can unlock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "0" or a random long number. If it does continue.
Set your input data box to "1" and hit SET. Output result should be 1
How To Keep Your Phone Unlocked
You can keep your phone unlocked and prevent Zune from re-locking it.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlProd" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Keep this screen open and continue to Part 2
Part 2
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlInt" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Backout to the password screen and shutdown the phone via powerbutton.
Reboot and sync. Your phone should stay unlocked.
How to Re-Lock your Phone without Chevron 7
Don't want your phone unlocked anymore? You can re-lock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "1". If it does continue.
Set your input data box to "0" and hit SET. Output result should be 0
Your phone is now locked. To Unlock the phone redo the above steps but set back to "1"
ChevronWP7 custom ringtone manager
http://www.chevronwp7.com/post/2054291102/chevronwp7-custom-ringtone-manager
^^^You will also find the link you need for the Windows Phone Developer Tools
Enjoy! Oh, and a quick look around XDA will give you what you need to make changes to themes and such, so have fun!
While the unlock works as described and I can deploy applications on the phone I cannot debug from Visual studio. The application deploys and it can be manually run but I cannot debug. The following error displays when I hit F5
---------------------------
Microsoft Visual Studio
---------------------------
The application could not be launched for debugging. Ensure that the target device screen is unlocked and that the application is installed.
---------------------------
OK
---------------------------
Any ideas would be appreciated, I've tryied pretty much everything so far including a clean install of the latest VS + WP7 sdk and a factory reset of the phone.
Same here
I have the same issue with debugging that you do. The only way I've managed to resolve it was restoring to a pre NoDo backup, unlocking with Chevron and then updating to NoDo again. I can only guess that Chevron must do more than change that one registry key (or rather, that the phone does more than change that key when it's told by chevron to unlock) but unless we can figure out what that extra step is we're probably stuck.
Your Problem
Well, that is your problem right there, lol. Both of you mentioned using Chevron to unlock. If you are using Chevron to unlock, AND using MFG, well, chances are ur pissing it off somewhere. dont use both. MFG makes it so that you DO NOT NEED chevron with the LG Quantum, not to unlock. and everything else works just fine - the chevron ringtone thing, ect. Thats probably where ur extra step is... ur unlocking it two different ways and making it upset.
jlott069 said:
Well, that is your problem right there, lol. Both of you mentioned using Chevron to unlock. If you are using Chevron to unlock, AND using MFG, well, chances are ur pissing it off somewhere. dont use both. MFG makes it so that you DO NOT NEED chevron with the LG Quantum, not to unlock. and everything else works just fine - the chevron ringtone thing, ect. Thats probably where ur extra step is... ur unlocking it two different ways and making it upset.
Click to expand...
Click to collapse
No Chevron in my case, I've only used the MFG on a NoDo updated phone. I don't think you can debug using only these registry keys. There is something else.
have you tried actually calling LG and talkin to tech support? I honestly cant think of anything myself... and ive been thinkin about it and working on it since it was brought to my attention. Its LG's software, they should know something.
I guess you could try a hard reset to see if anything happens
thanks for putting this up here. I've discovered this as well a while back and still find a lot of people with LGs that are being told to roll back or reset their phones after they got their NoDo in the WP7 forums. Many people believe what doesn't work with their device applies to all devices. Luckily for us LG included the registry editor right on the device
Your title should include that this works after NoDo and it should be made a sticky!
cheers
ps: you may want to include a reference to the original post by airwa1kin7 for your first part (link in my signature).
I have tried this several times but my phone still shows the following error when I use a SIM other than AT&T:
"This SIM card can only be used on specific networks. Contact your service center for the unlock code"
Any ideas on solving this would be appreciated
And does the "debranding hack" remove the AT&T boot screen?
-FIXED- Seems in my triple checking wasn't thorough enough, for the path's I was including "\" before the path and the whole string was showing HKEY_LOCAL_MACHINE\\ (the \\ being my issue) just fyi for any other spacey people X)
I attempted the registry hacks to unlock, keep unlocked, and change app limit on my post NoDo AT&T quantum and triple checked my registry after connecting to my x64 win7 ultimate machine and trying to load my chevron prepared ringtone. With most package loaders I get an error of an app limit but I believe with Tom's XAP installer along with the chevron unlocking tool I tried after realizing the registry hack didn't work, I get a phone not detected error when it is clearly shown in Zune which I have open during the whole process. Could it be nodo interfering or an issue within windows? Should I try a restore and chevron post nodo? The debranding isn't required for the unlock to have an effect is it? Any advice would be appreciated as I get bored with these ringtones!
-Update: Error received when attempting to deploy XAP to device using Windows Phone Development Tools Application Deployment.
Error - Unable to install application. The maximum number of developer applications on this phone has been reached. Please uninstall a developer application and try again.
-Note: I have never been ABLE to install a developer application so I don't think it's possible I have any to uninstall. I have changed the app limit registry key and it seems to have no effect, unless the problem is that my phone isn't unlocked, would I get the same error if that were the issue? It is possible to unlock post NoDo with MFG right? Wish i could figure out how ...
When attempting with Tom's XAP installer it says Make sure your phone is unlocked, make sure you've connected device to pc and zune launched.
Seems to me the phone just isn't unlocking...
Is it possible to rollback to pre nodo amd attempt? would it better my odds?
its not removing the subsidiary lock from the phone. you are misunderstanding the information. when it debrands, the provider no longer has control over whether or not you get updates and such. the debrand does not remove the logo. check around, im sure someone has figured out how to do that. as far as the unlock goes, it is simply allowing sideloading. not moving over to another carrier. basically you are changing the code to a devel code. if you want to unlock, well i doubt it if that can be done just yet. check around, i might be wrong. but i know that the carriers are not going to release the unlock codes yet, but call your carrier, u might get lucky.
as far as the app limit change goes, the only devices i am aware of that working on at the moment is HTC, but that is only for sideloaded apps. debranding isint required for the unlock to work, but that still does not matter. at the moment, my understanding is that pre and post nodo there is a 10 sideload app limit on all LG devices. the HTC code may differ slightly for whatever reason. your problem is that is just is not possible to do more. when your computer says it needs to be unlocked, it is ALSO talking about your screen, not just the phone. if you are doing something like sideloading ringtones, remember, u can load them, then remove the app that installed them. uninstall, then reload, that way you dont end up filling it up. a developer app is anything you are attempting to sideload. anything you are not getting from the marketplace. it IS possible to unlock post no-do. sounds like u just have too many sideloaded apps. remove some, then try. and make sure your phone is on the start screen.
oh, and I would put the reference, accept that wasnt where I found it. I cant remember where I got all of it, thats why I apoligised for reposting anyones info.
jlott069 said:
oh, and I would put the reference, accept that wasnt where I found it. I cant remember where I got all of it, thats why I apoligised for reposting anyones info.
Click to expand...
Click to collapse
that's alright. just trying to help. the reference is in my signature.
cheers and thanks for putting this together.
Another useful registry key: Allow max number of unsigned apps
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg\Install]
"MaxUnsignedApp"=dword:7fffffff
jlott069, problem was i wasn't able to sideload any apps, so i couldnt have had too many installed. but problem resolved, thanks for the advice!
Now this is just crazy, reflashed my phone. and i hgot all the updates again, now i'm trying to unlock it and once again am having the same issues.... seems like it isn't unlocked after changing the registry keys
-fixed after resetting to factory defaults and trying just the unlock key, i think it has issues trying to do the unlock and 2 keep-unlock keys at the same time
Another odd thing i notcied and i'm not sure what causes it, but either after unlocking my phone or installing touchxperience, i lose the capability to browse the memory via USB mass storage (zune registry hack)
I still have that option, but I dont use touch experience, and i just still have it unlocked. I had to re-unlock it after my update to mango? I dont know why... but it unlocked just fine and im side-loading apps again with no problem. maybe the issue is in the zune registry hack? I duno...
jlott069 said:
I still have that option, but I dont use touch experience, and i just still have it unlocked. I had to re-unlock it after my update to mango? I dont know why... but it unlocked just fine and im side-loading apps again with no problem. maybe the issue is in the zune registry hack? I duno...
Click to expand...
Click to collapse
happened to me too when going from NoDo to Mango it was locked even though relock was disabled. I think it's normal and it will stay unlocked if you followed the known steps.
cheers
so after i install mango i think to relock again, will this process still work for the offical mango, thanks
1. How I can upload DEV_UNLOCK.cab to locked HTC phone ?
2. ISV cleanup update what does if I have RTM build 7720.68 ?
My phone stays with 7720.68 after cleanup. It took 3 min is it normal ?
Thanks for answers.
marek1 said:
1. How I can upload DEV_UNLOCK.cab to locked HTC phone ?
Click to expand...
Click to collapse
You'll find everything you need here:
http://forum.xda-developers.com/showthread.php?p=17306513#post17306513
marek1 said:
2. ISV cleanup update what does if I have RTM build 7720.68 ?
My phone stays with 7720.68 after cleanup. It took 3 min is it normal ?
Click to expand...
Click to collapse
Same here, dont' worry ...
sorry i still dont understand how the dev_unlock works..after we send it to the phone via cab sender phone loads up then what do we do now? i know it cannot be rebooted ??
8007001F just got this error trying to send it
if you upgraded to final Mango and phone is locked, first you must send remove unlock cab
when this finish, delete remove unlock cab and send unlock cab to phone...
if this not work, only solution is hard reset (settings - about - reset my phone)
dxdy said:
if you upgraded to final Mango and phone is locked, first you must send remove unlock cab
when this finish, delete remove unlock cab and send unlock cab to phone...
if this not work, only solution is hard reset (settings - about - reset my phone)
Click to expand...
Click to collapse
how come remove unlock cab first?
because, BTTF ROM is already unlocked.... and something mess up with mango upgrade and you must first remove old unlock then unlock again... luckily we have 2 options for again unlock: hard reset or cab files... you can do what you want but only with cab files you not loose data on phone
I can upload to locked device the "DEV_UNLOCK.cab" without any problems ?
Just send the CAB via SENDCAB app ?
stop asking and try already dont worry, device not locked... just something messed up when upgraded...
dxdy said:
stop asking and try already dont worry, device not locked... just something messed up when upgraded...
Click to expand...
Click to collapse
I am asking what if I will somehow have normal locked device, can I only send the DEV_UNLOCK.cab to device, nothing else ?
Please give me the answer, that's only what I need.
I have unlocked [ I hope ] but I want it know from the teoretical point.
Thanks.
sorry , what you mean locked device?
marek1 said:
I am asking what if I will somehow have normal locked device, can I only send the DEV_UNLOCK.cab to device, nothing else ?
Click to expand...
Click to collapse
no... cab files is only for custom ROM's...
and this section of forum is for HTC HD2 and logically we suppose you have this device... HD2 use only custom ROM's... next time when you asking question, try this in correct forum section depend to device and write more information (device name, version of software (ROM)
dxdy said:
no... cab files is only for custom ROM's...
and this section of forum is for HTC HD2 and logically we suppose you have this device... HD2 use only custom ROM's... next time when you asking question, try this in correct forum section depend to device and write more information (device name, version of software (ROM)
Click to expand...
Click to collapse
Ok, Thanks for the aswer that CAB files are only for custom ROM's.
This I didn't know.
Yes, I got HD2 you can see it in my signiture.
but BTTF v2 ROM is custom ROM and is already unlocked and sending cab-s work....