Related
Hi, i currently live in toronto, canada, and i use rogers as my provider. when i put my sim card (from rogers) and turn on the phone, the phone says that it the network cannot find something (provider i think), and i should update my software. it then takes me to the "network connections" where i choose my country, and my provider. i notice that Canada is not in that drop down box. can someone please tell me how i can go about choosing Canada, or do i have to flash with a modded firmware instead of an original firmware? please answer!
Shaolyn said:
Hi, i currently live in toronto, canada, and i use rogers as my provider. when i put my sim card (from rogers) and turn on the phone, the phone says that it the network cannot find something (provider i think), and i should update my software. it then takes me to the "network connections" where i choose my country, and my provider. i notice that Canada is not in that drop down box. can someone please tell me how i can go about choosing Canada, or do i have to flash with a modded firmware instead of an original firmware? please answer!
Click to expand...
Click to collapse
Same thing happened here, I live in Brazil and it is not in the drop down list. I just choose dismiss (or something like that) as soon as the first message appears, followed by "do now show message again" (or smth like that).
Been using the phone without any problems so far.
oh yea? ok t hats cool. do you think you can help me out then..
i dont understand what 3G EDGE GPRS are.. like because im with the provider, i do not want to be charged more than just calling people.
when i plug in my sim card, do you know what is supposed to be displayed on the top of the dopod, near the Signal strength?
and could you tell me what each of those three mean? thankss
Shaolyn said:
oh yea? ok t hats cool. do you think you can help me out then..
i dont understand what 3G EDGE GPRS are.. like because im with the provider, i do not want to be charged more than just calling people.
when i plug in my sim card, do you know what is supposed to be displayed on the top of the dopod, near the Signal strength?
and could you tell me what each of those three mean? thankss
Click to expand...
Click to collapse
Answer:
3G-Video calling using the secondary camera (which we can't use yet in canada)
EDGE- Basically high speed data transfer (since you are with rogers, I believe there are data plans that support that feature)
GPRS-Never use it, cuz it charges on your airtime using the towers
dms182 said:
Answer:
3G-Video calling using the secondary camera (which we can't use yet in canada)
EDGE- Basically high speed data transfer (since you are with rogers, I believe there are data plans that support that feature)
GPRS-Never use it, cuz it charges on your airtime using the towers
Click to expand...
Click to collapse
ok, but then if i were to use roger, what should i be seeing near or beside my signal strength? i notice your using fido. what do you see there, because i was thinking of fido as well
Shaolyn said:
ok, but then if i were to use roger, what should i be seeing near or beside my signal strength? i notice your using fido. what do you see there, because i was thinking of fido as well
Click to expand...
Click to collapse
In Calgary downtown Rogers services, my CHT9100 can get 3G signal (showed small 3G icon on the top); other places alway has EDGE signal (showed small E icon instead).
watchsat said:
In Calgary downtown Rogers services, my CHT9100 can get 3G signal (showed small 3G icon on the top); other places alway has EDGE signal (showed small E icon instead).
Click to expand...
Click to collapse
and for those you do not get charged right?
Shaolyn said:
and for those you do not get charged right?
Click to expand...
Click to collapse
Not really, the data(3G/EDGE) services in Canada is way too pricy yet, I change the default setting to "disable" the connections...
watchsat said:
Not really, the data(3G/EDGE) services in Canada is way too pricy yet, I change the default setting to "disable" the connections...
Click to expand...
Click to collapse
ok, then normally if i dont want to be charged with anything other than having signal strength and making calls, what normally shows near the signal strength? i guess my question really is: if i dont want EDGE, 3G or UTMS or anything, what should i be seeing beside the signal strength?
Shaolyn said:
ok, then normally if i dont want to be charged with anything other than having signal strength and making calls, what normally shows near the signal strength? i guess my question really is: if i dont want EDGE, 3G or UTMS or anything, what should i be seeing beside the signal strength?
Click to expand...
Click to collapse
You can call Rogers and tell them you don't want any data services, then you should see a X icon right beside your signal strength level...
Ok when i put it in it says:
Network Wizard
Your current operator (30272) is not supported. You should obtain an update from your device vendor.
Would you like to select another network provider?
I want to put canada in it.. if anyone knows how to do it please post!!
watchsat said:
In Calgary downtown Rogers services, my CHT9100 can get 3G signal (showed small 3G icon on the top); other places alway has EDGE signal (showed small E icon instead).
Click to expand...
Click to collapse
same happen to my P3600 in calgary too. does i didnt know rogers offer 3G service
gwmkwan said:
same happen to my P3600 in calgary too. does i didnt know rogers offer 3G service
Click to expand...
Click to collapse
Rogers will provide 3G services in late July, I think what we got is testing signal...
watchsat said:
Rogers will provide 3G services in late July, I think what we got is testing signal...
Click to expand...
Click to collapse
Oh really?? Is that the 3G will be available to all Canada customers or just a few cities only?
But I cannot see this announcement in the Rogers website though.
Shaolyn said:
Hi, i currently live in toronto, canada, and i use rogers as my provider. when i put my sim card (from rogers) and turn on the phone, the phone says that it the network cannot find something (provider i think), and i should update my software. it then takes me to the "network connections" where i choose my country, and my provider. i notice that Canada is not in that drop down box. can someone please tell me how i can go about choosing Canada, or do i have to flash with a modded firmware instead of an original firmware? please answer!
Click to expand...
Click to collapse
I'm running original HTC WM5 firmware with the GPS it works great on Rogers =/
3G was available in Toronto since early 2007, but at the prices Rogers charges, they can go and **** themselves with a large steel pipe.
sniperess said:
I'm running original HTC WM5 firmware with the GPS it works great on Rogers =/
Click to expand...
Click to collapse
i see i see.. but when i put the sim card in, i notice i dont have a full signal.. theres like only 2/4 signal strength. is there any way to make it a full signal strength?
yegor said:
3G was available in Toronto since early 2007, but at the prices Rogers charges, they can go and **** themselves with a large steel pipe.
Click to expand...
Click to collapse
i called fido, and apparently (the perosn on the phone told me) that one of the two (3G or EDGE) is not charged. he said something about a price/kb for one of the two, and that the other one doesnt have a charge..
yegor said:
3G was available in Toronto since early 2007, but at the prices Rogers charges, they can go and **** themselves with a large steel pipe.
Click to expand...
Click to collapse
Agreed. I disabled all data way back when I had a regular phone. I kept getting random data charges when I never loaded my browser so I just disabled it. Anyway, I get the 3G logo, however, I haven't tested out the transfer rates or anything like that. I don't know if you can boost the signal or anything, I manage to make calls (which are surprisingly perfectly clear) with 1 bar.
I get the Edge logo on my phone in vancouver. I do know that they charge for Edge usage here and there was a big promo for unlimited Edge usage for about $40 bucks per month posted on craigslist.com. I know 3G network has been built, but probably a few good years before it's affordable to use.
Hi all sorry but Im not real up tpo date with some of this stuff, but I will tri to explain; I have just go a prepaid 3G wireless sim and got it sort of working but the data really is very slow about 30-40k, It is with Optus in Australia and I am in a regonal area I thort it may have been sonthing wrong with my shift but i tried a telstra data sim in it today and it worked at nearly 1600k down and 260 upload.
I spoke to an optus person today and they said it was because the device doesn't have a band for HSDPA 2100MHz/900MHz dual band that optus uses in regional areas is this right? Is there a away to add that setting/band?
Is theere a nother rom with thoses settings? (I am using i00's rom which has been working well)
But here shows it works on optus 2100mhz 3G band.
http://www.onlineshoppingaustralia....ear-htc-shift-35g-next-g-mobile-computer.html
I think it's the 900mhz side of things optus uses in regional Australia that is the problem, and Im 300km the closest place that has a 2100mhz service
Scott's Shift said:
Hi all sorry but Im not real up tpo date with some of this stuff, but I will tri to explain; I have just go a prepaid 3G wireless sim and got it sort of working but the data really is very slow about 30-40k, It is with Optus in Australia and I am in a regonal area I thort it may have been sonthing wrong with my shift but i tried a telstra data sim in it today and it worked at nearly 1600k down and 260 upload.
I spoke to an optus person today and they said it was because the device doesn't have a band for HSDPA 2100MHz/900MHz dual band that optus uses in regional areas is this right? Is there a away to add that setting/band?
Is theere a nother rom with thoses settings? (I am using i00's rom which has been working well)
Click to expand...
Click to collapse
The Shift does not have UMTS 900 band (it is Tri-Band UMTS: 850/1900/2100). The speed you say there sounds more like Australian GPRS connection. So, you are probably running your GPRS. What is the icon on your WinMo side - G, E or 3G/H (sorry if I am telling you to suck eggs there)? If it is G or E then you are not using UMTS.
Next G works very well on it (I use mine all the time) and has good coverage. It is on the 850 band so fits in the Shift range. My wife even has one of those Telstra Pre-Paid Wireless Internet USB Sticks. There is a SIM inside that I took out and stuck in the shift to test out because it has better pricing per MB (can not make phone calls on it - so my normal Next G went back in )
Cheers
Yes it is running on gprs and it does tha just the letter "G" there. so it is a hardwear problem? can it be overcome by softwear?
Scott's Shift said:
Yes it is running on gprs and it does tha just the letter "G" there. so it is a hardwear problem? can it be overcome by softwear?
Click to expand...
Click to collapse
No . It is hardware only and no software can "make" the physical antenna change its frequency setting (lots of reasons, all very boring and maths based - way beyond me).
The Shift is very capable for the platform, but like almost all "world phones" (ie quad band GSM), it does not have the quad band UMTS. In fact I do not know any quad band UMTS devices (though there probably are some).
If you live in a region outside of "normal" 3G (and note only Telstra has H capability - unless something has changed with the other carriers over the las six months), then Telstra is the only solution at this stage.
Love them or hate them (I'm personnal luke warm), they do have good coverage for the Australian landmass.
thanks, its a pitty that telstra is so expensive they charge $30 for 225meg and optus is $30 for 1 gig
Does anyone know why my Omnia 2 gets weak signal strength on At&t. I rarely get the 3g network and, at most, get 1 bar. However, the internet works fine and I love the phone but don't know if I need to go to Verizon to get better reception.
Tried At&t support but, other than upgrading the sim card, they won"t do anything with a non-at&t device. And since it was bought before the phone was launched in the U.S. I can't get support from Samsung. Are there some settings on the phone that can be changed to improve reception? Any ideas would be greatly appreciated - thanks.
Here's the network specs for the phone: GSM/GPRS/EDGE 850/900/1800/1900 MHz, UMTS 850/1900 MHz, HSDPA 7.2Mbps, HSUPA5.76 Mbps
JohnHere999 said:
Does anyone know why my Omnia 2 gets weak signal strength on At&t. I rarely get the 3g network and, at most, get 1 bar. However, the internet works fine and I love the phone but don't know if I need to go to Verizon to get better reception.
Tried At&t support but, other than upgrading the sim card, they won"t do anything with a non-at&t device. And since it was bought before the phone was launched in the U.S. I can't get support from Samsung. Are there some settings on the phone that can be changed to improve reception? Any ideas would be greatly appreciated - thanks.
Here's the network specs for the phone: GSM/GPRS/EDGE 850/900/1800/1900 MHz, UMTS 850/1900 MHz, HSDPA 7.2Mbps, HSUPA5.76 Mbps
Click to expand...
Click to collapse
Try changing your band settings to WCDMA then 850+1900. Works great for my Touch HD T8285.
almost there - thanks
Thanks for your reply. But, after surfing the net I still can't figure out how to change these settings on the Omnia 2, ok I don't know how to do it on any phone. Is this something easily done, and if so, how?
JohnHere999 said:
Thanks for your reply. But, after surfing the net I still can't figure out how to change these settings on the Omnia 2, ok I don't know how to do it on any phone. Is this something easily done, and if so, how?
Click to expand...
Click to collapse
Not sure on your phone but on mine go to settings, then phone, then band settings.
no band settings there either
Not that easy. I get phone, then settings, then the options are general, voice call, video call and message.
General sub folders are: call cost; caller id; own number; fixed dialing; auto answer; closed user group
Voice Call sub folders are: call barring, call forwarding, call waiting
Video Call - n/a
Message sub folders are call broadcast message, wap push message, voice mail, send text message options
I tried looking at the connections menu which yields:
My Internet - add a new modem; edit my proxy server; manage existing connections.
Manage existing allows you to change from media net or other connections and when you do that there are no options for changing band. Also if you try to create a new connection there is still no mention of band.
http://forum.xda-developers.com/images/smilies/frown.gif
I am not sure if your phone has 850mhz, as far as I Know the omnia 2 i8000 has 900/1900/2100 compatibility and maybe that is why you are getting so weak signal,
Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.
rob3rtx said:
Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.
Click to expand...
Click to collapse
This is true, I have the GT I8000l version and the band settings are in the Omnia Settings/Network Settings/Band settings menu -- Mine is set to Automatic, though there are other choices including the WCDMA, GSM 900/1800 and GSM 850/1900. You must also enable HSPDA setting as well (same Network menu) and then reset your phone.
I get Great 3G+ / HSPDA speeds almost everywhere around Harrisburg, PA "EXCEPT" in my own HOME location (only Edge ) Just that I am behind a mountain so.....
Anyway, this lack of Home location 3G+ is causing me to place my Omnia 2 (Bell Canada version) up for sale as I was expecting 3G in my own home !!!! (probably going to Ebay this weekend. The phone is great though and the screen (OLED) is INCREDIBLE !!! I am running SPB mobile shell 3.0 (Lite rom installed) so phone is quite zippy without the widget mess though the original Bell rom can be reinstalled. ( I have on DVD ) Really ticked though about the lack of 3G* at home so I may be looking for HD2 or such --and settle for EDGE speed.
Thanks to XDA developers for considering and supporting some Non HTC phones such as OMNIA 2
Not true AT ALL!
rob3rtx said:
Only the Bell Canada Omnia2 has 850mhz + 1900mhz so unless you have this one it won't work well with at&t 3G.
Click to expand...
Click to collapse
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.
technillion said:
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.
Click to expand...
Click to collapse
Chicago might primarily be 1900mhz but Dallas (my home) and probably where the original poster is located is 850mhz so the i8000L from Bell would be a better choice and probably for everyone else so you could never be limited to 1900mhz.
CAL0613 said:
This is true, I have the GT I8000l version and the band settings are in the Omnia Settings/Network Settings/Band settings menu -- Mine is set to Automatic, though there are other choices including the WCDMA, GSM 900/1800 and GSM 850/1900. You must also enable HSPDA setting as well (same Network menu) and then reset your phone.
I get Great 3G+ / HSPDA speeds almost everywhere around Harrisburg, PA "EXCEPT" in my own HOME location (only Edge ) Just that I am behind a mountain so.....
Anyway, this lack of Home location 3G+ is causing me to place my Omnia 2 (Bell Canada version) up for sale as I was expecting 3G in my own home !!!! (probably going to Ebay this weekend. The phone is great though and the screen (OLED) is INCREDIBLE !!! I am running SPB mobile shell 3.0 (Lite rom installed) so phone is quite zippy without the widget mess though the original Bell rom can be reinstalled. ( I have on DVD ) Really ticked though about the lack of 3G* at home so I may be looking for HD2 or such --and settle for EDGE speed.
Thanks to XDA developers for considering and supporting some Non HTC phones such as OMNIA 2
Click to expand...
Click to collapse
I loved the Omnia 2 but the lack of Roms and not having xda support (not such much anymore now i guess) made me sell it and go back to my Rogers Magic. I'll probably wait for the HTC Obsession or maybe the HTC Bravo as my next phone i definitely wanna check out Windows 7 when it comes out.
technillion said:
I have the original Omnia II with the 1900mhz band and have not had a single problem with excellent 3G speeds in Chicago and surrounding suburbs.
I'm getting the exact same signal strengths I was getting when I had the ATT Fuze - which does have BOTH the 850 and the 1900 mhz bands.
Click to expand...
Click to collapse
can you post your network settings?
I've had pretty good reception in the NYC area on 3G for the past 6 months... until today. Now my phone can get 3G and 3g+ reception but I can't get any data over 3G anymore. When I step down to EDGE, I can get data again. iPhone users seem to be fine. Anyone else having these problems in the NYC area?
Hello, I am having trouble getting 3G working on my x10i. I have read through these forums and tried every apn settings I could find but still it only uses edge. T-mobile customer service tells me i have great 3g coverage in my area but that since its a non-tmobile phone it will not use 3G. Is this true or can anyone help? Right now im using epc.tmobile.com as my apn, data roaming on, and MMS & data turned on. Need more info just let me know.Thx for any help
check your sony ericsson xperia x10 box on the side, see if it said UMTS is saying "AWS1/AWS4/AWS8" if you are missing AWS4, then you will not be able to use T-mo USA 3G because T-mobile UMTS (3G) bandwidth frequency is 900 (AWS1) / 1700 (AWS4) / 2100 (AWS8)
i had a similar problem when my T-Mobile 3G constantly switched to Edge even when i had good coverage, i found this solution somewhere and it helped me, since then i was never dropped from 3G unless i had no bars... i would give this a try for your problem too.
1) enter in dialer the following: *#*#4636#*#*
2) select phone Information
3) press the menu button (left bottom hard key)
4) Select Radio Band
5) Select USA Band
6) Reboot Phone
This will narrow down your phone to USA 3G only, (if leaving the country you should switch back to automatic to get international 3G coverage), i found this also helpful for 3G speed and battery performance.
check your sony ericsson xperia x10 box on the side, see if it said UMTS is saying "AWS1/AWS4/AWS8" if you are missing AWS4, then you will not be able to use T-mo USA 3G because T-mobile UMTS (3G) bandwidth frequency is 900 (AWS1) / 1700 (AWS4) / 2100 (AWS8)
Click to expand...
Click to collapse
Thx for your replies , yes it says "UMTS/HSPA band 1/4/8" So should be possible.
1) enter in dialer the following: *#*#4636#*#*
2) select phone Information
3) press the menu button (left bottom hard key)
4) Select Radio Band
5) Select USA Band
6) Reboot Phone
This will narrow down your phone to USA 3G only, (if leaving the country you should switch back to automatic to get international 3G coverage), i found this also helpful for 3G speed and battery performance.
Click to expand...
Click to collapse
thx for your reply, I tried this and i still see the E for edge. Could it have something to do with the fact that where i live is actually using a different tower than tmobile?
thx for your reply, I tried this and i still see the E for edge. Could it have something to do with the fact that where i live is actually using a different tower than tmobile?
Click to expand...
Click to collapse
I doubt cause tmobile told you that your coverage is okay, it might be that you have an old sim card with no support for 3G, or Would say your phone is defective…
-------------------------------------
Sent via the XDA Tapatalk App
try go to setting --->wireless controls --->Mobile Networks ----> Network mode
and select WCDMA only
see if it go back to 3G signal. For my area sometimes i stay on edge due to signal blocked by building walls....
by the way, will you get 3G signal when you are outside of your house or in a wide open area?
When i choose WCDMA i lose my cell signal completely. I have tmobile service but In my area it is always using centennial wireless towers for my signal, centennial was bought out by AT&T which have not yet switched their new towers to 3G yet. Could this be the problem? Thx
devilleather said:
When i choose WCDMA i lose my cell signal completely. I have tmobile service but In my area it is always using centennial wireless towers for my signal, centennial was bought out by AT&T which have not yet switched their new towers to 3G yet. Could this be the problem? Thx
Click to expand...
Click to collapse
Sounds like you found the issue. If WCDMA only shows no signal at all, it means you do not have T-Mobile 3G in your area (I suspect the 1700 spectrum).
It looks like there is a roaming agreement in which T-mobile can "borrow" the AT&T tower. So, all you get is the GSM signal. Don't bother to wait for AT&T to get the tower to 3G...because, you know, it won't be the same 3G signal as T-mobile. AT&T operates 3G on 850 and 1900.
If that is the issue, maybe you have to switch to a X10a.
When i choose US band it says its unsuccessful? any ideas why???
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Nehuen said:
Hello, i live in a relatively small town where my service provider has very poor 4G signal. but pretty good 3G signal. With the Axon 7 i have a lot of signal problems that i didnt have with any of my previous phones, where outdoor signal is pretty bad and indoor signal is almost unusable. It also connects almost exclusively to 4G, and in contrast all of my previous phones connected almost exclusively to 3G. Over the last weekend i traveled to a major city where my service provider has very strong 4G signal, and the signal problem was almost non existant. I even had signal in places where other people with the same service provider did not. So my theory is the following, assuming that the hardware (antenna) used for 4G and 3G is the same, it may not be a hardware problem, but a problem with the software having a hard time knowing which band/signal it should connect to. It seems that in my case it prioritizes 4G signal and the cost of a VERY unstable cellphone service. This is also assosiated with the fact that when it connects to 3G (incredibly rare), the phone goes inmediately from 1/2 bars to 4/5 bars. I also changed the SIM configuration to leave LTE out, but either for a visual bug or a software bug, it keeps connecting only to 4G. So could this be the problem that me and a lot of people in low 4G signal zones are having? Is there anyway i can force the phone to connect exclusivly to the 3G signal to test if that is indeed the problem?
Regards!
Click to expand...
Click to collapse
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
tabletalker7 said:
Without knowing which model Axon 7 you are using, where you are using it, and who your provider is, there is little anyone can do to help you. All I can say is that it helped me A LOT to go into settings and turn off
VoLTE.
Click to expand...
Click to collapse
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Nehuen said:
U model last update, using it from Argentina, and the provider is Claro. I have LTE disabled in SIM confg as i already said and VoLTE turn of as well but the phone keeps connecting to 4G no matter what i do, even if i configure it to only GSM
I don't think its a matter of position or provider (version could be if different software is provided), but a general issue with the phone and band/signal interpretation coupled with the apparent innability to go off 4G
Refards!
Click to expand...
Click to collapse
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
tabletalker7 said:
ok when it connects to LTE it says "4G LTE". The 4G that you are getting is probably HSPA or something. And we had someone on here a few months back using Claro in Argentina and they had to seek answers from their Claro
Click to expand...
Click to collapse
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Nehuen said:
If "4G LTE" is 4G and "4G" is HSPA, when only a "G" appears, what band am i connecting too? Its still pretty weird that im having major signal issues in my town, but when i go to a big city my signal is even better than other phones, it seems inconsistent with the whole "bad hardware" theory. I talked to Claro and it seemed like from their end it was a non issue, can you point me to the thread to see if he got it fixed somehow?
Regards!
Click to expand...
Click to collapse
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
RedWave31 said:
/Trolling a bit/
I'm always LMAO when I hear US people talking about that 4G scam (which is H+ for real btw)
G is for 2G
E is for 2G+
3G is 3G
H is 3G+
H+ is 3G++ (an intermediary protocol up to 42MBps)
4G is LTE (up to 150Mbps in the EU most of the time)
4G+ is LTE-A (which is available in most of the EU, SK & JP) - up to 600Mbps, 200MBps in most tests
I've not heard of an app that could modify the way the phone "clings" to 4G LTE, since that might likely be the modem firmware doing it on its own.
Click to expand...
Click to collapse
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
i have the G european model, in my town i have bad lte signal 1/2bar, when with my previously xiaomi mi4c was got 4/5 bars (maximum). In the big town i have got in the most of cases 4/5 bars. I think the "signal problems" are relatives of a lack of somehow software. i told this because i've read with the china model with the last updates an improvement of the signal reception of the phone.
Nehuen said:
Then this is even weirder, because is G is not 3G, but 2G it means that the phone NEVER connects to the major band that all of my previous phones and Claro users connect to. Is there anyway to force to only connect to 3G?
Regards!
Click to expand...
Click to collapse
You can however force a specific protocol indeed, but you will lack the ability to autoswitch networks. Just download 4G LTE Switch (here) which is a glorified secret code dialer. Just click on prefered network and change at your convenience (4G LTE only, WCDMA only - H+ - and so on). Remember that if you force 4G LTE in an area in which you have no coverage, you won't have internet, and no 2G/3G fallback (so no texts, no calls)
I don't know if this is the same problem, but my wife has an iPhone 6+ and I have an A2017U on B29 stock root. We both use the same network (Movistar Mexico) and while her iPhone often registers LTE, my A7 often registers 4G or even E in the same place. The A7 is receiving the same bands but appears to be "choosing" or locking into the slower protocols more often.
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
nuserame said:
EDIT: NEVER MIND… an xposed module was messing with my network settings. Fixed it. Now I get LTE right away.
Click to expand...
Click to collapse
Which module?
What if flash any Custom OS?Would it give better signal ?