Related
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
gentlemandroid17 said:
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
Click to expand...
Click to collapse
i tried that and nothing happened.
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
gentlemandroid17 said:
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
No charge light at all =/
I had the same problem, it occured while switching from cwm to twrp. i used the unbuntu method ( i think you mean this right here: http://forum.xda-developers.com/showthread.php?t=2582142)
are you sure you were in fastboot mode? because i wasnt and it should say so in the top left corner if you were.
try different cords/ usb ports or even pc's to charge it. my mac couldn't find it at all, my windows did.
UnknownCloakedMan said:
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
Click to expand...
Click to collapse
Cord charge my tab just fine, therefore im assuming the cord is fine... i think
i have the same problem
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
I have the same problem my phone is completly dead i don't know what else can i do, the linux tutorial doesn't work because the pc don't detects the phone
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
bachera said:
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
Click to expand...
Click to collapse
For me the brick happened when i was flashing KK with TWRP, during the flashing appears something that said "couldn't not mount system" and the phone shut down and never power up again , no usb no charge, no linux, no nothing, when i plug my device in windows appears that the devices cannot install the drivers, and i've tried all the drivers and still doesn't work
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
techbeck said:
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
Click to expand...
Click to collapse
i've tried all the possible combinations of buttons and no one works, i've been holding the power button for a whole minute and nothing happened, and the other combination either, nothing seems to work i give up
It's just power you press after the logo, not power and volume down.
pimfram said:
It's just power you press after the logo, not power and volume down.
Click to expand...
Click to collapse
There's no logo, 'cause it doesn't turn on by any means , no matter what button or combination i press, there's no response.
Thanks
Have you tried getting into download mode?
pimfram said:
Have you tried getting into download mode?
Click to expand...
Click to collapse
i've tried everything, download mode, linux, recovery, lg mobile, and nothing works i think it's completly brick, i hope one day someone comes with the solution, because i went today to SAT and they don't even know what happened with my phone, and i bought it in another country so they don't want to get involve
So all you get is a black screen with you boot? There's probably a way to push whatever file might be missing or even an entire ROM but I lack the knowledge on how to do that. I remember I had to work some magic on my Galaxy Nexus but I used a toolkit so I'm afraid I've got no really useful information for you.
This also happened to me!
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Bobert the great said:
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Click to expand...
Click to collapse
I'm afraid to tell you, but our phones die there's nothing to do to saved them, we just have to keep them in that state meanwhile the solution comes up, because in this very moment there's nothing we can do
Hi guys yesterday my nexus freeze in gmail.. so i turn it down by pressing and hold te power button
then the tablet freeze in the Google LOGO
after taht i try to ge into Recovery mode,, it freeze aswell then i just reboot it on bootloader adn i leave it thre for about 1 hour charging
the i try to go to boot loader to fhasl stok rom..
but..!! it wont work.. never turns on..
and it shows in my pc as APX mode
no more than that y tri to start it in bootloader but i just cant with every method i find in internet even i try to charge it by pogo pins and nothing happends
i try to do soetring with nvflash but it said
Unknow devices found and do nothing
pls help me ,!!
radeon9550 said:
Hi guys yesterday my nexus freeze in gmail.. so i turn it down by pressing and hold te power button
then the tablet freeze in the Google LOGO
after taht i try to ge into Recovery mode,, it freeze aswell then i just reboot it on bootloader adn i leave it thre for about 1 hour charging
the i try to go to boot loader to fhasl stok rom..
but..!! it wont work.. never turns on..
and it shows in my pc as APX mode
no more than that y tri to start it in bootloader but i just cant with every method i find in internet even i try to charge it by pogo pins and nothing happends
i try to do soetring with nvflash but it said
Unknow devices found and do nothing
pls help me ,!!
Click to expand...
Click to collapse
Ok as far as I have herd there is no way to rescue a bricked nexus 7 using NVflash if there are no Backed-up Blob files on it. If you just ended up in apx mode without doing anything to its bootloader then it is probably out of charge or needs to have a particular button combo to sort it out
if on the other hand you corrupted the bootloader and after that the device is in a sleep of death then you have hardbricked your nexus 7 'apparently'
good luck
No Custom Bootloader
Hill well i never done something to the bootlaoder no Multibot no Custom bootloader ( factory only )
i try a lot of key combination but nothing happend :/
but my questin is i got a second n7 same specs how can i pull the blob files and,
can i use this files to unbrink the other
if i can pls explainme that
i love my tablet i dont wanna see her die
thnaks..
don't give up
radeon9550 said:
Hill well i never done something to the bootlaoder no Multibot no Custom bootloader ( factory only )
i try a lot of key combination but nothing happend :/
but my questin is i got a second n7 same specs how can i pull the blob files and,
can i use this files to unbrink the other
if i can pls explainme that
i love my tablet i dont wanna see her die
thnaks..
Click to expand...
Click to collapse
Ok if you want to know about how to set up a link between the NVflash tool (on your computer) and your new n7 just use the following proceedure here www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean
As far as your old n7 is concerned if it is definitely hard-bricked and you have not made a backup using NVflash before the brick then there is no known way to save it with only a computer and n7 connected via USB however there is a slim chance your old n7 might just be in a state where it can't access the bootloader because of some power shortage or incorrect button states so do keep trying the key combos and recharging etc because there are a lot of stories of people who escaped using this random strategy. Normally to get into apx mode one would press all three buttons at once so to get out you could do the same so it is worth a try
BTW I have one more trick up my sleeve, if you download WugFresh's toolkit for the n7 (make sure its 2012 edition) then you could try pressing the 'reboot bootloader' option in the advance options menu in the lower left.
good luck
Gloftking said:
Ok if you want to know about how to set up a link between the NVflash tool (on your computer) and your new n7 just use the following proceedure here www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean
As far as your old n7 is concerned if it is definitely hard-bricked and you have not made a backup using NVflash before the brick then there is no known way to save it with only a computer and n7 connected via USB however there is a slim chance your old n7 might just be in a state where it can't access the bootloader because of some power shortage or incorrect button states so do keep trying the key combos and recharging etc because there are a lot of stories of people who escaped using this random strategy. Normally to get into apx mode one would press all three buttons at once so to get out you could do the same so it is worth a try
BTW I have one more trick up my sleeve, if you download WugFresh's toolkit for the n7 (make sure its 2012 edition) then you could try pressing the 'reboot bootloader' option in the advance options menu in the lower left.
good luck
Click to expand...
Click to collapse
Same deal here - and frickin ASUS wanted $165 JUST for the motherboard part. So I said no to the RMA and they sent it back.
NOW my question is - can I order a motherboard and just swap it out? Does that work? http://www.ebay.com/itm/Asus-Nexus-...2GB-ASUS-Google-ME370T-Ship-Fast/121330719361
bshiznit said:
Same deal here - and frickin ASUS wanted $165 JUST for the motherboard part. So I said no to the RMA and they sent it back.
NOW my question is - can I order a motherboard and just swap it out? Does that work? http://www.ebay.com/itm/Asus-Nexus-...2GB-ASUS-Google-ME370T-Ship-Fast/121330719361
Click to expand...
Click to collapse
Haven't done it myself, but understand it does work. https://www.ifixit.com/Guide/Nexus+7+Motherboard+Replacement/9943
PrizmaticSmoke said:
Haven't done it myself, but understand it does work. https://www.ifixit.com/Guide/Nexus+7+Motherboard+Replacement/9943
Click to expand...
Click to collapse
Thanks! Ordered it and will be attempting
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
something similar happend to me..
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
HyperVenoms said:
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
Click to expand...
Click to collapse
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
No but i found a solution
rxxern said:
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
Click to expand...
Click to collapse
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
#https://docs.google.com/uc?id=0B7pEcClQW-2JenF1cW9jb05OVlk&export=download
thanks enjoy!!
No that lucky
HyperVenoms said:
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
Click to expand...
Click to collapse
So lucky! I can't do that to mine, when I put the battery out and try to do this, my phone has no response. ):
out of options
marwachacha said:
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
thanks enjoy!!
Click to expand...
Click to collapse
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
rxxern said:
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
Click to expand...
Click to collapse
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
marwachacha said:
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
Click to expand...
Click to collapse
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
hmmm
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
HyperVenoms said:
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
Click to expand...
Click to collapse
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
haha ok, i habe no idea what to do wiith your phone try searching other threads maybe ???
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
also in advance try to change the usb cable which you are using to connect (him) with your computer as well as try different Pc's may Be yours might have some usb port drivers corrupted also try to install the ADB interface drivers in your pc so as you can enhance your Pc detect the devices even if they are powered off gues it will work still i have hope with your (him) buddy!!!
Nothing better than xda.
I am having the same problem with my G530BT. Managed to solve ?
rxxern said:
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
I am having the same problem with my G530BT. Managed to solve ?
Raphaelfla said:
I am having the same problem with my G530BT. Managed to solve ?
Click to expand...
Click to collapse
Ow, one year latter I don't think this will help you anymore, but just in case someone has the same question: I didn't solve the problem, I took it to the Samsung assistence and discover that the motherboard was damaged, they would have to replace it.
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!
Please don't blame Huawei for YOUR mistakes. Thank you
Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...
help us
i have a same problem did you find solution
Same Problem Here
I have the same issue. Have anyone found a solution yet?
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.
Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31
Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen
any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo
Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?
Hello
So a few days ago, my Huawei P8 Lite started doing strange things. The phone often stopped working , but I was still able to restart it. This morning, the screen was stuck again, so I restarted the phone . However, I was not able to put it on again. The screen remains black, and the only thing that is working, is the little light (that is turning red all the time).
I have no back-ups (I know, this is stupid), but there are some very dear pictures on it. I have been reading some guides to recover the date, but I can't figure out what to do, and the applications I've tried are not working.
If I connect the phone to my laptop, it is recognized as Fastboot 2.0. Is it possible to recover data through this? The fact that my laptop still recognizes something, does it mean the phone still works?
I don't have to money to go to a shop or recovery center, so any help or advice would be appreciated.
Thanks in advance!
Michieldgz said:
Hello
So a few days ago, my Huawei P8 Lite started doing strange things. The phone often stopped working , but I was still able to restart it. This morning, the screen was stuck again, so I restarted the phone . However, I was not able to put it on again. The screen remains black, and the only thing that is working, is the little light (that is turning red all the time).
I have no back-ups (I know, this is stupid), but there are some very dear pictures on it. I have been reading some guides to recover the date, but I can't figure out what to do, and the applications I've tried are not working.
If I connect the phone to my laptop, it is recognized as Fastboot 2.0. Is it possible to recover data through this? The fact that my laptop still recognizes something, does it mean the phone still works?
I don't have to money to go to a shop or recovery center, so any help or advice would be appreciated.
Thanks in advance!
Click to expand...
Click to collapse
Boot in fastboot by press and hold volume down and conect your usb cable on pc and your phone then press power button,once you are in fastboot,flash twrp recovery,then boot to recovery,once in there,conect your usb cable,you should see your memory phone