I have a problem with my HD2, when I connect it to my PC via USB, it charges, but the computer doesn't recognise it/it doesn't connect.
I have looked through the forums and still couldn't find a solution
Would it be that the usb port is broken? Its starting to really annoy me now, I can't put music onto it or anything. Its running WP7 if thats any use...
Related
hi
i got a touch dual right here. I got it for like 1,5 year now. But the last months the phone wont connect to a computer/laptop or anything!
i tried several computers, windows xp/vista/7 installing the mobile application of windows and activesync. Also i tried a softreset and couple of hardware resets.. it still doenst work. The phone has energy from the usb connection, but the computers dont do anything...
anybody can help? or is just my usb connection on my phone broken? only the charge option does work?
greets!
nobody?
It ever happened on my nike. Try to use another usb cable and connect your device to another PC with activesync installed
i got the same problem i was going to make a post but saw this one after installing niki wwe this started to happen i cant connect to active sync no more it does not even say if a usb is connected but charges while connected can some 1 help us please i want to install normal windows instead of cooked room but cant do it if its like this
well after half a year not being able too connect my phone connects again!
very weird, i didnt change anything, not even te cable and computer...
i installed wm 6.5 cleanblack now
Hi there,
I've had my HD2 for 2 weeks now and its been working perfectly. I decided to hard reset my phone and start again from scratch. However, now when I connect it to my PC it doesn't connect or recognise it at all, it charges though. I also tried it on my laptop, thinking it might be my PC but its just the same. This is really frustrating and any help would be greatly appreciated.
Goto "Start/Menu/All Settings/Connections/USB to PC" and ensure ActiveSync button is green.
If you are running Vista or Win7 you have to install Windows Mobile Device Center. http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If not the normal Active Sync will not see the phone.
Hey guys. I know this a old thread. I notice ever since I used the program here to change the radio on my htc hd2 that my computer no longer detects my phone with snyc cable even if I have Windows Mobile Center 6.1 installed an such. The programs pop up though when I look on device manager there no unknown devices or anything. In fact I don't even hear a sound of any sort that a usb device was plug into my pc same thing on my laptop. I even put back original tmobile rom on my htc hd2 no resolve. When I fflash it with Leoimg.tbh or how ever you spell it I put it in my sd card. Any ideas on how to get the old phone to work on windows 10 again? or is something mess up in the coding on official rom or on how I flash it back to stock?. I wish I had a old pc with windows vista to see if it just windows 10 or what. Just seems so odd
no reaction from phone nor pc
Hi, guys i have similar problem, but it has nothing to do with Active Sync. The device won't notice that it is connected to the pc (it won't ask (this option is ticket) if it should act as card reader, modem or Active Sync) so as pc won't show new device. Strangely, while the device is connected into an outlet charger via cable including data wires and "don't charge if connected to a pc" option is ticket in hd2, it acts as it is connected to a pc and won't charge. When it is connected to a charger with unseparable cable (which i suppose hasn't have data wires) it starts carkit menu. For me it seems like something is shorted but i'd like to hear some other suggestions before i try to disassemble it and look inside.
hello everyone !
i was looking for thread about my problem, i saw some similar problems, solved but not working for me..
i was connected to my PC through USB cable, transfering data few times, about 5 times, than i tried to connect to transfer some more data and nothing, on my tattoo there is just sign of charging and nothing else, no asking for type of connection, there is sound on my PC (connected something through USB ) and nothing else.. i tried to manually set for storage device, put to ask me each time when i connect via USB and still nothing.. also, tried USB DEBUGGING, it says that htc is connected to PC but PC is like dead..
i'm on windows 7 if that means something, thank you for you help
pls anything ?? i have pics to transfer to PC and mp3 for tattoo but i just can't solve this out :S
I had the same problem when I just got my first android. My first guess is - you accidentally killed PC Synchronization process on your phone. Reboot should help (at least it did for me).
I had the same problem and solved it!
put pc sync into taskiller ignore list...
how can you explain me please?
goran95 said:
how can you explain me please?
Click to expand...
Click to collapse
hi
also still have this problem the sync does not happen automatically so what i do is after connecting my phone via USB i go to the USB to pc on my Phone and click on the HTC sync and then the sync happens and i can do any kinda data sync needed try doing it it work for me
USB Debugging also has to be cheked OK
i also have a Wmo Jade this does not happen it sync imm but on the tattoo it always happens and i need to do the above to get the sync working
Hi!
Ive got a big problem cause my Galaxy S just stopped being recognized by any PC. I dont know whats wrong, it just treats USB cable like it was a charger, PC doesnt detect anything neither does the phone. Its very strange since everything worked perfect for the last couple of weeks. I tried to connect it to a notebook i used to flash the phone a week ago and it has been turned off ever since so it cant be any driver related issue. Im afraid my micro-USB port is damaged but i have a custom firmware in it and since i cant reflash it the warranty isnt vaild ehh...
Any ideas?
THX
silly question...
Do you mount the phone via the status bar after you plug it in?
Thats the point - PC doesnt detect the phone AT ALL theres not even a sound that an USB device has been plugged in. The same thing in the phone it just starts charing it doesnt seem to know that its connnected to PC.
sounds like your PC mobo got the USB port fried.
try turning off the PC, unplug the power cord, wait for the energy to drain out, then turning it back on
my Windows 7 x64 some time does that, but it's not a hardware error
on yours it could either be a hardware dead, or the Windows gone Bezerk as usual
I tried different USB devices - other phones, pendrives and a printer and everything works fine except for the Galaxy S. The Samsungs USB cable also works fine with other phones..
I wrote to Samsung and they said to send them the device because its most probably damaged :\ Will they check the firmware version?
btw. as I said in the first post the phone doesnt work on my notebook as well
I wouldnt care so much about this because I can send files using ftp but I cant change the firmware without an USB port working (or am I wrong?)
I sometimes also have this problem. For me rebooting the phone and if it then doesn't work again using another USB port at my PC solves the problem.
Yesterday when the problem occurred for the first time I removed SIM and microSD cards and PC detected a device but it was recognized as 'unknown malfunctioning USB device' but no luck ever since.
Just to let you know my Samsung just fixed itself 0_o Might have something to do with the Windows reinstallation on my PC but it suddely works on my notebook as well. Im really confused now...
Hopefully someone can help with this. I'm running Yuki 2.1 on my phone and my phone will connect to any pc and charge but will not be recognised as a device. Even after removing all USB devices with USBDVIEW i get no luck.
So steps I have tried:-
1.) Restarting everyting, phone and computer.
2.) Hard Reset phone
3.) Uninstalled all phone related software (zune, wp7 sdks etc)
4.) Different USB cables
5.) Disabled virus protection
Now I as far as I am aware I could just flash another Rom through magdlr (havent checked if this will actually work yet) but I only have the one sd card at the minute and because im using Yuki it'll be locked. So without being able to sideload the unlocker am I screwed? or can anyone think of something I can do?
I forgot to mention I also tried connecting to it via Ubuntu and both magdlr and WP7 dont appear to connect yet the phone charges fine. I'm stumped guys, any ideas?
the phone charging has nothing to do with windows desktop recognizing your phone.
what you said about ubuntu doesn't make sense...what are you saying about ubuntu?
i've found sometimes it takes a while for the pc connection to recognize the phone...shutdown phone an pc. try again. don't use pc to charge your phone..use external charger.
go into devices in the control panel..remove hd2 entries...reboot pc, try connecting.
OK what I am saying about both Windows (Multiple versions on multiple computers from Win7 to Xp) and Ubuntu (desktop os) is neither of them recognise the device what so ever, it is not a driver recognition issue, the device is apparentley not connected. There is no sign of it being connected to the PC at all, except for the fact it DOES charge. I have removed all previous drivers (including on my own pc where HD2 appears under devices & printers as suggest above), software and restarted both deivces many times since.
I am not charging my HD2 via the PC, I charge it from the wall. What I am saying is when it is plugged into a computer it does charge but according to the PC's it is does not exist as a connected device. Let alone recognizing the phone. This has only happened since this particular boot of Yuki 2.1, I have had multiple other Roms including this one before and never had this issue before.
I have connected it to computers on which the phone has never been conected to, and others that it has worked on all with multiple cables. So I am under the impression it is a phone issue, unless I have been a real derp and you can think of anything I may not have.
it could be a phone issue. i've always had yuki rom my phone, currently v2.1since first out, and no problems whatsoever. as i said, the phone charging via pc has nothing to do/with the pc recognizing the phone...it's a straight usb port power connection like connecting to any usb port.
see if you have the same issue with a different rom.
Thanks for your help. Think I have sorted it now.. I don't know why I didnt think of it sooner but I checked the usb port on the phone and the internal "pins" had been pressed up against the side of the connection so werent making contact with the cable. Looks like it was happily taking a charge like that but no data connection... seems to have just been a coincidence that after finishing installing yuki again that I was a total drip and mashed the charge into the port bending the pins.
So happy now I can keep my beloved HD2, untill the quad core run of WP8 devices are released.
I had the same problem in my MAGLDR mass storage USB phone connected to the PC but not in WP7.5, eventually was a problem with the cable.
glad to hear it was just misaligned pins.
Might also be the cable. I think I've got a similar problem - using the original USB cable Zune recognices the device, using another cable it doesn't (Unknown hardware). But the phone is charging with both - and I don't see any damaged pins on the phone.