Hi guys,
I have already changed SPL to HardSPL using the instruction on XDA fourm, and its ok, But whenever I try to flash either Official Rom or Cooked Rom the progress screen stuck on 0% and after couple of minutes "custom rom flasher" shows a recovery window!
(I forgot to mention that the device is Unbranded with this number "T3333". one of the strange thing is that I can connect to my phone through Active Sync on win 7<I can see Both Partition in file explorer>, but in the active sync inside the phone everything is disabled! it is like as if there is no active connection between the Device and PC)
Does any of you guys know how to figure it out?
*PS > I DID SEARCH ON THE XDA , BUT I DIDN'T FIND ANY RELATED THREAD!
Related
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
it is time to donate to XDA-developers!
Just reflash the ROM, friend. Seems to be a bad flash to me.
deleted this post
wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers
I dragged my Mini s out of the draw thinking it dead for the past few months, after using the battery jump start trick got her up and running again. now, after using mobile 6 on my other HTC i wanted to upgrade on this one, nothing fancy just bog standard mobile 6. its an O2 G4 model, I also checked it with the wizard service tool. I then used the hard SPL G$ tool to unlock it, that went fine. the device repowered and worked. I then tried to load in windows mobile 6 from this thread
http://forum.xda-developers.com/showthread.php?t=355591
after its started the flash I got an error message saying "error 300 invalid update tool" please get a newer tool, I have tried to run it again and now get the message " error 2641 cannot connect " and now all I have is an XDA with a red, green and blue screen showing IPL2.21.0001, SPL 2.21,0lip and "usb" in the bottom left corner
is it bricked? can I recover it, I will be gutted if it is bricked as I followed the instructions to the letter
btw I havnt disconnected it from the USB at all, just leaving it there until I get somne advice from here
update, bit the bullet and unplugged, soft reset and its all as it should be, on windows mobile 5.
so my question now is why didnt the Rom update in the link above work? or am I just a noob doing it wrong...
try downloading another rom and flash it again...even if it isn't connected in activesync ignore that and flash away...if that still doesn't work try your original rom wm5 and then flash a wm6 again...it's not bricked(see below)
stevescoots said:
I dragged my Mini s out of the draw thinking it dead for the past few months, after using the battery jump start trick got her up and running again. now, after using mobile 6 on my other HTC i wanted to upgrade on this one, nothing fancy just bog standard mobile 6. its an O2 G4 model, I also checked it with the wizard service tool. I then used the hard SPL G$ tool to unlock it, that went fine. the device repowered and worked. I then tried to load in windows mobile 6 from this thread
http://forum.xda-developers.com/showthread.php?t=355591
after its started the flash I got an error message saying "error 300 invalid update tool" please get a newer tool, I have tried to run it again and now get the message " error 2641 cannot connect " and now all I have is an XDA with a red, green and blue screen showing IPL2.21.0001, SPL 2.21,0lip and "usb" in the bottom left corner
is it bricked? can I recover it, I will be gutted if it is bricked as I followed the instructions to the letter
btw I havnt disconnected it from the USB at all, just leaving it there until I get somne advice from here
Click to expand...
Click to collapse
Download this RUU ,extract it and replace all the files in the folder with the RUU files in the Rom and run the RUU,it'll flash successfully .
stevescoots said:
update, bit the bullet and unplugged, soft reset and its all as it should be, on windows mobile 5.
so my question now is why didnt the Rom update in the link above work? or am I just a noob doing it wrong...
Click to expand...
Click to collapse
Your ROM Update may not have worked because, maybe it was not built for the G4 Wizard. so try anyother ROM
xda2_hasseb most of the WM6 roms available for download on xda-developers are G4 safe as they don't conntain ipl and spl flash....so you can safely flash a Windows Mobile 6 rom without bricking your Wizard
'XDA Mobile 6 Release 5 FINAL' is the latest custom build wm6 rom,build for both the devices,it can be flashed to both the devices G3 and G4 safely,its one of the most favourite roms.
Thakx xardas_90, i knew they didnt had the IPL and SPL with them but i didnt knew that it was IPL & SPL not the ROM it self that caused the Bricking of the G$ WIzards i thought Windows ROM for G3 and G4 were different but THANKS for the info. TC
Thanks for the advice, got it done and works a treat, except no data transfer or sms or net conncetion, still soldiering on, at best it will work, at worst, well i guess my son gets a hand me down lol
stevescoots said:
Thanks for the advice, got it done and works a treat, except no data transfer or sms or net conncetion, still soldiering on, at best it will work, at worst, well i guess my son gets a hand me down lol
Click to expand...
Click to collapse
You need to get GPRS/MMS settings configured,get these settings from your carrier,only then you'll be able to connect to internet/SMS/MMS, or check out the 'XDA Mobile 6 Release 5 FINAL' rom thread,you might find the appropriate GPRS/MMS settings there of your concerned network.
I'm using P4350..
After I flashed my device with a WM6.1 cooked rom, Active Sync doesn't work anymore.
When I plugged USB cable to my laptop, nothing happened. No detection of new devices,.. etc.
The screen on my device showed nothing as well. But the charging led is on as if recharging only.
When I checked Active Sync Program on my device the check box said connect via " `USB ". There's Grave accent in front of USB. I don't know if that relates or not. If so, I have no idea how to fix that....
Please advise
Volrath said:
I'm using P4350..
After I flashed my device with a WM6.1 cooked rom, Active Sync doesn't work anymore.
When I plugged USB cable to my laptop, nothing happened. No detection of new devices,.. etc.
The screen on my device showed nothing as well. But the charging led is on as if recharging only.
When I checked Active Sync Program on my device the check box said connect via " `USB ". There's Grave accent in front of USB. I don't know if that relates or not. If so, I have no idea how to fix that....
Please advise
Click to expand...
Click to collapse
What rom exactly that you flashed? need more info to help.
I'm not sure
I'm not sure what Rom am I using. The splash screen says ITsPapaBlack by Papamopps. But I'm sure this rom is not from him. This Rom is like a mod from Papamopp's rom.
I got this Rom long ago and discovered this problem just when I want to flash a new Rom.
Is there any other way to flash new Rom without using Active Sync?
I entered Bootloader mode, USB still didn't work.
P.S. I'm so impressed with immediate response and sympathy of people in this forum
Volrath said:
I'm not sure what Rom am I using. The splash screen says ITsPapaBlack by Papamopps. But I'm sure this rom is not from him. This Rom is like a mod from Papamopp's rom.
I got this Rom long ago and discovered this problem just when I want to flash a new Rom.
Is there any other way to flash new Rom without using Active Sync?
I entered Bootloader mode, USB still didn't work.
P.S. I'm so impressed with immediate response and sympathy of people in this forum
Click to expand...
Click to collapse
hmm... usually the active sync of a particular rom does not affect the bootloader. can you double check when you plugged in the USB cable at the bootloader, there is a "USB" word appears in the lower left corner of the bootloader screen. Alternatively, if your phone has hardspl, then you can flash it using a SD card.
I tryed to flash my ROM for the first time and have come across some problems:
I backed up my contacts, then downloaded :
File Type: zip Unsigned_HardSPL_for_Blackstone_OliNex.zip (1.12 MB,
followed by : [ROM][WWE][01.06.2009] Miri WM 6.5 21728 :: V 15.0 [ONLINE]
The phone has green/blue colour problems, reboots after approximately 2 minutes and is not connecting to active sync!
Can anyone offer suggestions on how I get the activesync working again and how I can corrrect this.
At a guess, I'd say you've used HSPL 1.14 and not the newest version (1.56). This problem has been covered literally hundreds of times on this forum. Try a search.
Also, if you read the text that accompanies the OliNex downloads, it might make more sense.
Seriously, READ THIS PAGE by cRaCKwHoRe.
Follow the steps and you can't go far wrong.
JB
eyeofthetiger said:
I tryed to flash my ROM for the first time and have come across some problems:
I backed up my contacts, then downloaded :
File Type: zip Unsigned_HardSPL_for_Blackstone_OliNex.zip (1.12 MB,
followed by : [ROM][WWE][01.06.2009] Miri WM 6.5 21728 :: V 15.0 [ONLINE]
The phone has green/blue colour problems, reboots after approximately 2 minutes and is not connecting to active sync!
Can anyone offer suggestions on how I get the activesync working again and how I can corrrect this.
Click to expand...
Click to collapse
Which version of HSPL did you use? What does your SPL say in bootloader? As previously mentioned my mate cRaCKwHoRe's tutorial will guide you through the correct process and both cRaCKwHoRe and myself are always browsing his thread to help people if they get stuck. (Guide in my signature)
I think I know where i hav gone wrong.
I need to flash HSPLWrapper_Blackstone_156OliNex.zip
BUT how can i do this if activesyn isnt now working, I deleted and re-did the partnership and that didnt work. I also unticked the 'enable faster syncing' on the USB to computer section. But that also didnt work? Windows mobile device centre doesnt even recognise the phone?
I flash from Bootloader: With the device Off, Press the Down Volume and switch on.
I think you also need to go in to Active sync setting and uncheck Allow USB first.
Actually reading the Hard SPL Page, I'm not sure thats the right way, as it says you need to be synched with a PC.
Sorry.
John Boy said:
Actually reading the Hard SPL Page, I'm not sure thats the right way, as it says you need to be synched with a PC.
Sorry.
Click to expand...
Click to collapse
No, you have to uncheck that box.
Put your phone in bootloader mode (pwr&volume dwn)
It will then say serial at the bottom of the screen. Now plug your phone into the computer and it should now say USB.
Now flash as normal.
It shouldn't be synced with active sync.
Hope that makes sense.
Jake
jake_tenfloors said:
No, you have to uncheck that box.
Put your phone in bootloader mode (pwr&volume dwn)
It will then say serial at the bottom of the screen. Now plug your phone into the computer and it should now say USB.
Now flash as normal.
It shouldn't be synced with active sync.
Hope that makes sense.
Jake
Click to expand...
Click to collapse
This is correct method. No partnership required with pc.
1. Just put phone into bootloader by:
a. Turn off device
b. Press vol down and power on (should be presented with tri-colour screen - this is bootloader)
2. Connect phone to pc and bottom of bootloader screen should change from 'Serial' to 'USB'
3. Now flash HSPL 1.56
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox