Related
hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..
I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk
I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.
Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?
last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?
interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..
Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.
I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?
mine don't work either. I have a 1 TB western digital hard drive.
i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop
I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.
I was interested in transfering files from my hone (Nexus s 4g) and my A500. I wanted to know if this is possible by simply plugging the phone into the tablet's usb port. If not, is there any drivers or apps i can download to let me do so? Basically, i want it to be like when i plug it into my computer. I want it to show up like a hard drive.
Also, i have a external harddrive and had a question on how to format it. When i right click hit format is comes up as NTFS being the default file system. The onl y other option is exFat. Is that the same as Fat32? I've heard Fat32 is the only file system that works.
Thanks for the help!
Spid3rman said:
I was interested in transfering files from my hone (Nexus s 4g) and my A500. I wanted to know if this is possible by simply plugging the phone into the tablet's usb port. If not, is there any drivers or apps i can download to let me do so? Basically, i want it to be like when i plug it into my computer. I want it to show up like a hard drive.
Also, i have a external harddrive and had a question on how to format it. When i right click hit format is comes up as NTFS being the default file system. The onl y other option is exFat. Is that the same as Fat32? I've heard Fat32 is the only file system that works.
Thanks for the help!
Click to expand...
Click to collapse
Use gparted partition manager on puppy linux to format it into fat32.....
Sent from my XT720 using XDA App
Still not working
Ive converted the drive to fat32 but i still cant get it to be recognized by my a500, can someone please explain how i could do so?
Spid3rman said:
Ive converted the drive to fat32 but i still cant get it to be recognized by my a500, can someone please explain how i could do so?
Click to expand...
Click to collapse
Try using a powered usb hub....or try using 'drive mount'.....search it in the market...
Sent from my XT720 using XDA App
i use nokia e71.
using the datacable ,connect the e71 to a500.
just like an u flash,i can see it in astro .
I CAN DO THIS AFTER UPDATE to 3.1 , and the mount with drive mount
I have an android Sony Ericsson X10I and trying to mount it on the a500 but its not even recognized. I've already tried the paid version of USB Mount all with no sucsess. If you have been able to access the x10i or other cell phones storage please let me know how you did it. Thanks- Bryan
Bryan858 said:
I have an android Sony Ericsson X10I and trying to mount it on the a500 but its not even recognized. I've already tried the paid version of USB Mount all with no sucsess. If you have been able to access the x10i or other cell phones storage please let me know how you did it. Thanks- Bryan
Click to expand...
Click to collapse
My Nexus One works with USB Mount All. On the phone it is set up with USB Debugging enabled, when prompted choose to mount on phone, wait till phone acknowledges it is mounted, then you should be able to launch USB Mount All and scan for your device (if it is not showing in the list). In fact, I just did this, and it worked.
Here's a screenshot.
daveid said:
My Nexus One works with USB Mount All. On the phone it is set up with USB Debugging enabled, when prompted choose to mount on phone, wait till phone acknowledges it is mounted, then you should be able to launch USB Mount All and scan for your device (if it is not showing in the list). In fact, I just did this, and it worked.
Here's a screenshot.
Click to expand...
Click to collapse
Thanks for the reply, I've actually already tried to mount with and without the usb debuging selected on the phone. I can select mount on the phone as soon as its connected but my A500 does not see anything. I know the drive works as I've used regular flash drives on it even before I bought the USB mount all app. Maybe the phones format is different than others. It does download other drivers when initially connected to a computer.
Bryan858 said:
I have an android Sony Ericsson X10I and trying to mount it on the a500 but its not even recognized. I've already tried the paid version of USB Mount all with no sucsess. If you have been able to access the x10i or other cell phones storage please let me know how you did it. Thanks- Bryan
Click to expand...
Click to collapse
It worked on my x10i.
Sent from my M9300 using Tapatalk
johnbibbs said:
It worked on my x10i.
Sent from my M9300 using Tapatalk
Click to expand...
Click to collapse
What did you do? Use? Are you using a custom rom on either? More details would be useful.
Are you being patient and refreshing USB Mount All a few times after your phone has confirmed it is mounted? Mine doesn't show immediately, but after a refresh or two it just works.
I'll give it another shot when I get home. I have a 16gb micro sd card in my x10i. would it make a difference?
Discovered the issue. I could not get anything to mount including flash drives through the mount all. I discovered the issue was caused by busy box not completly installing. Reinstalled and can now mount my phone. Thanks for the replies everyone.
Went to DL USB Mount All and I saw a review that said app Drive Mount isvthesame thing for free. Tried it and it mounted my X10 flwlessly
I use drive mount for my phone which has an 8 gig sd card partioned as fat 32, ext-3, and linux-swap.....and all the partion get mounted...
Sent from my XT720 using XDA App
Have a old 60gb external USB 2.0 hdd - formatted fresh using FAT - drive tests fine.
Cannot seem to get my a500 to use it - tried the "drive mount" tool from the market and I see my hdd under unmounted devices, when I try to mount it I get "driver for sda1 failed to load".
Running 3.1 early release, rooted.
One more question I had about USB - can I plug a powered or unpowered USB hub into the a500 and use both external keyboard / mouse at the same time?
(Edit: issue resolved. For some reason a full format using FAT produced a bad volume, whereas a full ntfs format worked like a charm. Next step: powered USB hub and I am gonna be so happy)
old drive
Is it in a old drive bay.some of the older external drive bays take alot of power. If it has a external power adaptor you might have to use it pluged iin. And trybto have your tablet pouted into power outlet as well.it helps with my 3.5 500 gig drive bay
Check
Yup - it's a older model and requires external power, which was plugged in - as well as the tab.
Formatted drive using Windows 7 - FAT was not a option, only exFAT or ntfs. Did full format.
Mount utility sees the drive - just cannot mount it. Might try a reformat from a older system and see if that helps.
entropy.of.avarice said:
Have a old 60gb external USB 2.0 hdd - formatted fresh using FAT - drive tests fine.
Cannot seem to get my a500 to use it - tried the "drive mount" tool from the market and I see my hdd under unmounted devices, when I try to mount it I get "driver for sda1 failed to load".
Running 3.1 early release, rooted.
One more question I had about USB - can I plug a powered or unpowered USB hub into the a500 and use both external keyboard / mouse at the same time?
Click to expand...
Click to collapse
Try formatting to ntfs, then use this to mount it. Works with my 750 gb external drive and it shows up under memory in settings. Also, yes both types of USB hubs, should work.
OK so I'm new and I can't post a link to Mega upload, but I can PM you the link if you like.
dogbots159 said:
Try formatting to ntfs, then use this to mount it. Works with my 750 gb external drive and it shows up under memory in settings. Also, yes both types of USB hubs, should work.
OK so I'm new and I can't post a link to Mega upload, but I can PM you the link if you like.
Click to expand...
Click to collapse
You nailed it - works like a charm. Thank you very much - going out of town soon, really need the storage.
Now if I could just *find* my damn USB hub
Which software you guys use for formating the hdd??....which format you guys use....?...can I use pupply linux for formating the hdd??
Sent from my XT720 using XDA App
vari9 said:
Which software you guys use for formating the hdd??....which format you guys use....?...can I use pupply linux for formating the hdd??
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
I am doing this on a rooted a500 running the early release of 3.1 - just used my Windows 7 desktop to format the drive as NTFS - using a free software package from market called "drive mount" which can mount lots of different devices. If you are not rooted - pretty sure the USB drive has to be FAT file system for it to work.
Sure, you can use Linux for the format - plenty of freeware tools for Linux that will do this for you in a nice GUI setting
I was planning pn using the gparted partition manager on puppy linux..........is it good enough?......and will my hdd suffer memory loss when I format it to fat32??
Sent from my XT720 using XDA App
vari9 said:
I was planning pn using the gparted partition manager on puppy linux..........is it good enough?......and will my hdd suffer memory loss when I format it to fat32??
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
Generally reformatting a drive will delete all data on said drive. Would recommend backing it all up, formatting it - and restoring it.
Do you have root on your Iconica? If so - you should be able to mount the drive pretty much regardless of what format it is in - what type of file system is it?
I haven't rooted my device......and I meant free memory loss.....would the hdd size decrease??
Sent from my XT720 using XDA App
I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.
Only root? Is that all that needs to be done?
spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!
hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem
read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk
Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.
Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.
No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno