Hi dear,
I'm suffering from the lag on my Note...t.t
My rom and kernel is N7000XXKJ4 but
What is the difference between KJ4 and KJ1?
Can anybody please let me know about it??
THANKS
jorkobe23 said:
Hi dear,
I'm suffering from the lag on my Note...t.t
My rom and kernel is N7000XXKJ4 but
What is the difference between KJ4 and KJ1?
Can anybody please let me know about it??
THANKS
Click to expand...
Click to collapse
Are they both from the same CSC (country/region)? If so, then KJ4 is newer. If they're from different countries/regions theres no way of telling which is newer unless you do a dump and look at the code. Samsung uses different naming conventions for each CSC when they release a ROM. So you can't really tell which is newer because they're only in order within a given CSC.
Related
Hey, just a quick one..
I have a UK with a Galaxy S i-9000
With 2.1-update1 (Eclair maybe?)
But I keep hearing these 'JM1 and 2 or even JMX)
Can someone please explain what these are?
And which JM will Froyo be? (2.2 right?)
P.S Yes, I'v searched the forums & Google.
Thanks guys.
SmoothGuy2000 said:
Hey, just a quick one..
I have a UK with a Galaxy S i-9000
With 2.1-update1 (Eclair maybe?)
But I keep hearing these 'JM1 and 2 or even JMX)
Can someone please explain what these are?
And which JM will Froyo be? (2.2 right?)
P.S Yes, I'v searched the forums & Google.
Thanks guys.
Click to expand...
Click to collapse
Hi,
Things like JF3, JPC, JM1 etc are just the codes (names) of different versions of firmware.
The Codes dont really mean anything in particular and they dont seem to follow any locical order.
There allready a couple of leaked unofficial 2.2 Froyo roms out there (namely JPC and JPH)
What the final official release will be called is anyones guess,
hope that helps,
the codes often mean year-month-release, eg. JF1:
J=10 (2010)
F=6 (June)
1=first release of that month
I don't know what the significance of the 'M' releases are. Are they all unofficial ones?
JM1 is the first official update for the UK
Hi Guys,
I assume that in the UK, we can use XW or XX, according to, for example this website http://forum.gsmhosting.com/vbb/archive/t-706422.html
Getting that out of the way, I assume that JPN is "newer" than both JPF, JPM and JPI
Is my logic correct? I gave up waiting for Samsung and KIES yesterday and just flashed JPN via ODIN. Can't believe I waited months, it's a vast improvement.
Share your thoughts!
ta, B
BuboBriff said:
Hi Guys,
I assume that in the UK, we can use XW or XX, according to, for example this website http://forum.gsmhosting.com/vbb/archive/t-706422.html
Getting that out of the way, I assume that JPN is "newer" than both JPF, JPM and JPI
Is my logic correct? I gave up waiting for Samsung and KIES yesterday and just flashed JPN via ODIN. Can't believe I waited months, it's a vast improvement.
Share your thoughts!
ta, B
Click to expand...
Click to collapse
No. Both I5800XWJPF & I5800XWJPI are newer.
XX= East Europe
XW= West Europe
kyrillos13 said:
No. Both I5800XWJPF & I5800XWJPI are newer.
XX= East Europe
XW= West Europe
Click to expand...
Click to collapse
Hi kyrillos, How's Greece today!
Ah ok! But how do you know that for certain? Have you tried JPI then? I know you appear to be the best custom ROM chap out there but I'm not ready to make that jump yet
Ta, B
BuboBriff said:
Hi kyrillos, How's Greece today!
Ah ok! But how do you know that for certain? Have you tried JPI then? I know you appear to be the best custom ROM chap out there but I'm not ready to make that jump yet
Ta, B
Click to expand...
Click to collapse
Emm today in Greece was a hot day
I didnt tried JPI yet, because i dont have time to
Much better than England I'm sure!
I5800XXJPQ is just released FYI
PS do you know this?
Do you know why the bootloaders "brick" phones sometimes?
People remove the bootloaders from the tar files to avoid this, but aren't they updated versions and required ever?
ta, B
Gave up on Samsung New Zealand yesterday.. been waiting for months as well.. flashed I5800XWJPF_XENJP1_XXJP4.. I have no regrets.. using it in conjunction with ADW launcher Ex pro.. very satisfied with this firmware up till now..
BuboBriff said:
Much better than England I'm sure!
I5800XXJPQ is just released FYI
PS do you know this?
Do you know why the bootloaders "brick" phones sometimes?
People remove the bootloaders from the tar files to avoid this, but aren't they updated versions and required ever?
ta, B
Click to expand...
Click to collapse
Bootloaders can brick, because if something were to happen while flashing the bootloader you probably wouldnt be able to boot or get into download mode and flash another rom (which you could do if anything else went wrong)
Guys how can U tell which version you run ?
Here's a SS of my device : URL not permitted yet .
In the 'Baseband' section says XXJP4 , but on the bottom it is XJPL .
I'm interested (and frankly new to all this , even though I got my phone 4 months ago) in Kyrillos rom and someone told me I need a specific firmware version to install it .
Is the stock JPM bug free? Like is it stable and does everything work properly i.e data,camera,player etc...
Please reply fast. I am new to flashing and I have thought of flashing this ROM. This would be my first ever.
So i've got an Galaxy SII here in Brazil, it's from Claro and strangely has the HKE2 BASEBAND, HKE4 Kernel.
I read somewhere that 2.3.4 was already avaliable if you had Sammy's retail FW, not Claro's modded crap.
By the time i got home to download it all the post had been removed so i missed the opportunity.
If anyone could point me in the right direction i'd be damn happy!
As far as my knowledge goes i remember reading that swapping from this "custom" to the official would not violate EULA nor my warranty, and that i'd be able to do it without having to root the phone.
Go to the development section, there is a thread by, Intarech (spelling may be wrong) that thread contains what you are looking for.
Sent from my GT-I9100
@Achillies400
TY for the directions.
And a bonus here, i just found out i have a franken-phone.
Checking the Carrier-specific firmwares i bumped into some trouble lol.
My phone is from Brazilian's Claro BUT build is technically a Chillean version.
Check this out:
PDA: UHKE4 is Chile-based
PHONE: UHKE2, well, ok.
Now here's the interesting bit, the CSC is ZTAKE2 wich is NOT LISTED ANYWHERE!
Will i have trouble if i flash this one below?
UHKE4
Firmware info
PDA:UHKE4
PHONE: UHKE2
Build date: 19/05/2011
ZTO (Brazilian): http://www.multiupload.com/WVI8WHL6BE
UHKE4 Stock Kernel: http://www.multiupload.com/3P5AEHVIA6
Password: [email protected]
Click to expand...
Click to collapse
Thanks everyone in advance.
Unrealbr said:
Will i have trouble if i flash this one below?
Click to expand...
Click to collapse
I was using it, found no issues at all.
You can also try flashing UHKG7 from http://www.samfirmware.com to get Android 2.3.4
(Even more strange is that the page says it's from Brazil, but SamFIT says it's from Chile too.)
EDIT:
This is the same FW from samfirmware
Firmware info
PDA:UHKG7
PHONE:UHKG4
Build date: 27/07/2011
Android 2.3.4
VNO, TDR, TTT: http://www.multiupload.com/PBGWY6EN58
UHKG7 Stock Kernel: http://www.multiupload.com/NU4TIWYETE
Password: [email protected]
Click to expand...
Click to collapse
dandroid13 said:
I was using it, found no issues at all.
You can also try flashing UHKG7 from http://www.samfirmware.com to get Android 2.3.4
(Even more strange is that the page says it's from Brazil, but SamFIT says it's from Chile too.)
EDIT:
This is the same FW from samfirmware
Click to expand...
Click to collapse
Any special difference from 2.3.3 to 2.3.4?
'Cause i'm looking forward at 2.3.6 already
I've found some minor UI tweaks so far, nothing major.
About 2.3.6 I think it will take a while to arrive at stock roms, maybe sooner with CM7 or MIUI only.
Updated successfully!
No issues whatsoever!
tyvm dandroid13!
So...
No problems whatsoever with 2.3.4?
No 3g data on/off problems on UHKG4 modem? I read that some guys were having some issues on getting 3g data back on after losing signal for whatever reason.
Can you confirm that everything works fine?
I just got an SGS II from Claro and I´m thinking of flashing it with this ROM to get rid of all that Claro crap (and get some original stuff back, like GTalk).
Can you hint me with the specific thread on how to flash SGS II with this ROM?
Thanks a lot.
mjasonm said:
So...
No problems whatsoever with 2.3.4?
No 3g data on/off problems on UHKG4 modem? I read that some guys were having some issues on getting 3g data back on after losing signal for whatever reason.
Can you confirm that everything works fine?
I just got an SGS II from Claro and I´m thinking of flashing it with this ROM to get rid of all that Claro crap (and get some original stuff back, like GTalk).
Can you hint me with the specific thread on how to flash SGS II with this ROM?
Thanks a lot.
Click to expand...
Click to collapse
So, the UHKE4 rom i flashed as avaliable from http://forum.xda-developers.com/showthread.php?t=1075278 (manual included there) is a 2.3.3.
Again, mine was bought THE DAY AFTER it was released here in Brazil, in late June so it has the hw version from Chile.
Aside from that it's all fine and dandy!
The major difference from the 2.3.4 FW is that you don't get Folha and Livraria Cultura apps.
is it I9500ZSUAMDK Brazil, becouse it has the changelist number of 565349 :silly: am i wrong. please help, i need to make my rom on the latest firmware
PLEASE... anyone
Latest firmware is from Taiwan for the gti9500 it has the highest change list
so in sammobile when i search i9500 in the firmware search is the top one the latest
does it have nothing to do with the firmware code. really, and sammobile doesnt have changelist numbers
http://www.hotfile.com/dl/213466780/7faac10/I9500UBUAMDE_I9500UUBAMDE_COO.zip.html
Did you notice any changes? . . I downloaded it but didn't flash I yet
armedking said:
Did you notice any changes? . . I downloaded it but didn't flash I yet
Click to expand...
Click to collapse
not really, but i am sure it fix something
How about the camera bug stil there ?
armedking said:
How about the camera bug stil there ?
Click to expand...
Click to collapse
i have no camera issue before :good:
Hi! Well, I'm on ANG2 on my GS5 G900F, and supposedly, the newest firmware is ANG9.
Can someone please tell me the actual difference between this 2 versions?
I don't know if is worth the update...
Thanks in advance guys!
aguarello said:
Hi! Well, I'm on ANG2 on my GS5 G900F, and supposedly, the newest firmware is ANG9.
Can someone please tell me the actual difference between this 2 versions?
I don't know if is worth the update...
Thanks in advance guys!
Click to expand...
Click to collapse
Don't get misled by the number ANG2 and ANG9 just because its higher doesn't mean its newer it is just a carrier or country release version of the original, you need to look at the change list values to see if its newer, if you connect to Kies and it says you have the latest version then you do have the latest version, you can check here if you want.
SamsungUpdatesArchive
The change list for all ANG2, ANG6, ANG9, they are all the same, if you feel you are getting something better then update to the ANG9 but the phone wont operate any differently and if you do update make sure the CSC is compatible with your location otherwise you will find that the data or calls or both will not work.