Related
After Plants v Zombies released on the Amazon app store I was happy (that it released and was free) then sad (BC it didn't work on any rom I was running) then happy-ish (b/c I found that it ran on VEGan v1.0 b5.1). This rollercoaster of happiness drove me to make the game work on a froyo rom I like enough to run froyo.
Anyway, if you like PvZ AND can/do/want to run a BL1.1 Froyo ROM, this kernel could be for you. I can't tell you much about it because i didn't compile it, I just extracted it from VEGAn b5.1 and packaged it up with wifi driver's into koush's AnyKernel update.zip format. I have installed over a handful of froyo Roms with great success (I have run it the longest on a derivative of Calkulin's rom). I have not had any noteworthy issues. I have not tried it on anything other than Froyo.
Warnings: Use at your own risk, backup first, know how to nvflash, etc.
What this does: Replaces your gTab kernel with one that (among other things) runs Plants v. Zombies without the dreaded freeze every two minutes.
To install: Flash zip file with CWM, wipe cache and dalvik cache, reboot.
Tips: Set wifi to never sleep.
NB: I think this goes without saying, but if you are on a vanilla VEGAn b5.1 then there is no need for this.
UPDATE: This kernel can experience the "Sleep of Death" issue where the tablet won't wake properly form sleep. A couple things to avoid that are:
1. After installing the kernel format cache, dalvik, and run fix permissions (all within CWM).
2. Make sure you are running a ROM that was not installed over another, ie. you have done a data wipe at some point after installing the custom ROM you are currently on. Restoring user apps and data with TB is fine, but a full data partition restore with CWM from another ROM can cause big issues.
3. Press the power button a little longer (maybe a 250-500 ms) rather than just a tap, and then wait a few seconds before pressing again.
4. Use power control widget or something similar and just toggle off wifi when you aren't using the tab for a long time (it saves battery too).
Download: Attached to post...
UPDATE 7/4:
Peggle, another Popcap title has the same issues. It works flawlessly on this kernel. Pershoot is looking into the issues (thanks pershoot!) soon (http://forum.xda-developers.com/showpost.php?p=15282076&postcount=1597).
Good work, Ramerco,
Always enjoyed reading your posts, as well as from a few great non-dev posters as TEK112, goodintentions, tjevans, etc . . .
BTW, PvZ is running fine on Beasty. It is a fun and hard to beat.
Dave,
mydave1 said:
Good work, Ramerco,
Always enjoyed reading your posts, as well as from a few great non-dev posters as TEK112, goodintentions, tjevans, etc . . .
BTW, PvZ is running fine on Beasty. It is a fun and hard to beat.
Dave,
Click to expand...
Click to collapse
really? no freezing? even on more complex levels? what is the kernel (you can see it from the about device/about tablet settiings page)
VEGAn 5.1 Froyo has a pershoot 1.1bl kernel that was compiled back in December. Is this really the only kernel that works, not even newer pershoot 1.1bl kernels? I wonder what was changed in the newer versions?
I've never used that game - I heard it's just as addicting as Angry Birds so I've avoided it like the plague.
yeah, not even pershoots first released standalone kernel from January works. I have no idea what's different. maybe it is from before the nvidia 10.9.9 stuff he mentions in his kernel thread.
FYI PvZ is fine on 3588, and so is Samaraui (another game people complanin about not running well on some ROMs). Stock isn't sexy or cool, but when I'm actually using a full-screen App I can't tell the difference between ROMs anyways.
mike_ekim said:
FYI PvZ is fine on 3588, and so is Samaraui (another game people complanin about not running well on some ROMs). Stock isn't sexy or cool, but when I'm actually using a full-screen App I can't tell the difference between ROMs anyways.
Click to expand...
Click to collapse
Funny that it works well on 3588. When I was testing, I may have only tested 4349 stock. But now I can't really remember. I actually really like the TnT status bar and the wifi and battery widgets in it. I also really like the Home screen and the settings app even though the settings is missing a few key things (you can always temporarily swap to stock settings for those). My point is, I like the stock-ish rom, but I also like to have root and long press Home to switch apps.
roebeet said:
VEGAn 5.1 Froyo has a pershoot 1.1bl kernel that was compiled back in December. Is this really the only kernel that works, not even newer pershoot 1.1bl kernels? I wonder what was changed in the newer versions?
I've never used that game - I heard it's just as addicting as Angry Birds so I've avoided it like the plague.
Click to expand...
Click to collapse
To answer Roebeet's and potentially other's question,
This is the only bootloader 1.1 kernel for Froyo that works for Plants vs. Zombies. All others freeze shortly after game launch that I've tested.
I tested the last 2 released versions of BL 1.1 (& BL 1.2 as well) kernels from pershoot or clemsyn of Froyo, GB, & HC kernels with adjacent 1.1 or 1.2 Android ROMs just for the heck of it--> all PvZ fail blog entries for me.
Someone in another forum mentioned BoS HC 3.3 PvZ working, but it didn't work for me. I sure wish it did.
Here's what Froyo ROM's work with the PvZ Kernel:
VEGAn-tab 5.1.1 bl1.1--> PvZ success & Roebeet Netflix fix works too
Calkulin-Clemsyn v.5 bl1.1 -->PvZ success- fastest gameplay & not working Roebeet Netflix fix
TnT lite 4.4.0 Froyo bl1.1--> PvZ success & not working Roebeet Netflix fix
Peggle has the same issue with other kernels. OP Updated to reflect. Popcap must have some crazy code stuff going on.
spideyngo said:
To answer Roebeet's and potentially other's question,
This is the only bootloader 1.1 kernel for Froyo that works for Plants vs. Zombies. All others freeze shortly after game launch that I've tested.
I tested the last 2 released versions of BL 1.1 (& BL 1.2 as well) kernels from pershoot or clemsyn of Froyo, GB, & HC kernels with adjacent 1.1 or 1.2 Android ROMs just for the heck of it--> all PvZ fail blog entries for me.
Someone in another forum mentioned BoS HC 3.3 PvZ working, but it didn't work for me. I sure wish it did.
Here's what Froyo ROM's work with the PvZ Kernel:
VEGAn-tab 5.1.1 bl1.1--> PvZ success & Roebeet Netflix fix works too
Calkulin-Clemsyn v.5 bl1.1 -->PvZ success- fastest gameplay & not working Roebeet Netflix fix
TnT lite 4.4.0 Froyo bl1.1--> PvZ success & not working Roebeet Netflix fix
Click to expand...
Click to collapse
I just nflashed back to BL1.1 and installed VEGAn-Tab 5.1 and then the 5.1.1 supplement. All the animations just show up as black blocks, is there something I'm doing wrong. I tried it both before and after installing flash 10.3, don't know if that matters.
Had that happen once or twice. Just kill the process and try again. The game uses tons of memory, suoometimes works better when you kill background apps. I know android is supposed to be great with mem mansagment, but it seems like some things run better wghen you kill background memory hogging apps.
WARNING: TRYING TO CUSTOMIZE YOUR VIEWSONIC MAY LEAVE THE DEVICE IN A BRICKED STATE. PLEASE MAKE SURE YOU FULLY UNDERSTAND HOW TO USE NVFLASH BEFORE TRYING THIS INCASE SOMETHING GOES WRONG AND YOU NEED OR WANT TO GO BACK TO THE VIEWSONIC STOCK TNT ROM.
What we offer here is a new way to keep you in full control of your tablet. Our 1.8 Honeycomb Kernel offers Speed, Reliability, and new added features. This kernel is a spin off of the Pershoot Honeycomb Kernel Source Code & want to thank Pershoot for all his work on the kernel already. You do not have to Flash your device or even update to a different ROM to feel the benefits of the Linux Box Solution Honeycomb Kernel...
Updating to the Linux Box Solution Honeycomb Kernel couldn't be easier. No wiping of User/Data is necessary. If you are already running a Honeycomb ROM then your good to go. This kernel was designed for Tegra 2, Harmony Board based devices. The LBS 1.8 Honeycomb Kernel has only been tested on a Viewsonic Gtablet. If any other developers with the Specified Tegra 2 & Harmony Board based devices wants to give this Overclocked Powerhouse a try please give me your feedback once you have tested it out.
Features as of Version 3.2:
Increased Kernel Cache Sizes from 256kb to 512kb
Improved Stability
Overclocking (Kernel is Overclockable to 1.4Ghz)
USB Mass Storage ( If your favorite Honeycomb ROM doesn't offer USB Mass Storage drop this Kernel in and Full Support is there)
Improved Video Play (480P Plays, Not sure about 720P but 1080P Does Not Work)
Git Hub Source Location: https://github.com/linuxboxsolution/LBSGtab
Linus Torvald Repo: http://android.git.kernel.org/platform/kernel/tegra.git
Pershoot Repo: https://github.com/pershoot/gtab-2632.git
For anyone in doubt or wondering. This Kernel has been fully updated with Pershoot's source code from his 7/2 update. Next changes to the source code are taken from Linus Torvalds Repo Source to help merge Pershoot's and Torvalds Source to make a more efficiently running Kernel.
Download Link:
LBS 3.2 Honeycomb Kernel: http://linuxboxsolution.com/linux-b...tions-Viewsonic-Gtablet-Honeycomb-Kernel-3.2/(increased kernel cache size for improved stability)
LBS 1.9.2 Honeycomb Kernel: http://linuxboxsolution.com/linux-b...ons-Viewsonic-Gtablet-Honeycomb-Kernel-1.9.2/(Wifi configuration changes to help people with wifi connectivity issues)
LBS 1.8 Honeycomb Kernel: http://linuxboxsolution.com/linux-b...tions-Viewsonic-Gtablet-Honeycomb-Kernel-1.8/ Initial Release
1. Download the zip file for the Kernel Version you want to the Root of your SDCARD Partition.
2. Rename file to update.zip
3. Reboot Tablet into Recovery Mode (When Tablets Off hold 'Power' Button and 'Volume +' Button at Same time till Recovery Mode is Shown On Screen)
4. Using Volume -/+ to navigate the Clockwork Mod Menu go to apply /sdcard/update.zip
5. Once Installation of New Kernel is done Reboot the Tablet & Enjoy your newly found Feature Set and Performance Improvements
aww what the hell i'll give it a go...currently running BoS 6.0 and it's smooth...I'll post back with Quadrent scores for those who care about them.
Updated: well it might be me but the lockscreen seems more responsive, Video plays about the same but im in Rockplayer, Quadrant was 2677 using Quadrant Advanced. Kepp up the work guys.
Update: Ok well been playing with it and just found out No WIFI here. it won't pick up any signel...this might be just me but so far Reboot + turning wifi off and back on did not fix it i'm going to wipe cache and see if it resoves it.
Update: as of right now the Update did not fix the problem nor did wiping cache/data...Going back to my nandriod and i'll watch for updates.
Also i'm using a static setup with WEP Security if that helps...it shows my old connections but won't connect or find new ones.
Awesome please do but if you haven't yet try the updated version.
I had an exchange with you on slatedriod about "your" new kernel. You admitted that it is based on per shoots old GB codebase with your new wiz bang improvements. Why don't you say that here and say that this kernel is an L BS modified version of his kernel. You must just be looking for donations for the work of others?
you're going to continue updating illuminate with this right?
how have you improved playback of video in this kernel? is the improvement rom agnostic?
WiFI Issues
Well I was having intermittent WiFi problems with Illuminate until I flashed this Kernel, now I am just getting an error when I try to connect to WIFI.
jbrianj said:
Well I was having intermittent WiFi problems with Illuminate until I flashed this Kernel, now I am just getting an error when I try to connect to WIFI.
Click to expand...
Click to collapse
Try the latest pershoot GB kernel. And/or try the Flashback of BoS roms
Hi Everybody,
I need some help. I installed this rom into my malata zpad. First opening, there was no problem but after restarting, touchscreen was not worked.
I reinstalled, but same problem was occurred. My touchscreen is not working, only back and home button, which are physical button, are working.
What can I do?
I noticed this behavieur with the latest Version before I hadn´t any problems
I read today that this is Pershoot's latest + cm7 modules. No changelogs, no submissions to github. I read in the rules here something about "don't do anything to get us in trouble". To me this kernel looks like something that might do just that.
I loaded this kernal on top of illuminate yesterday. Couldn't determine if this was already part of the rom or another update to the kernal. In any event it did add some pep to it. Haven't figured out all the improvements yet. It did however mesh nicely with illuminate.
For the record I think this kernel is only compatible with illuminate and bos. Flashing this or clemsyns ver11 onto Flashback breaks the wifi.
ramerco said:
This thread has turned into a joke with no information other than a re-compiled version of pershoot's kernel.
Can it be closed please.
Click to expand...
Click to collapse
No, it is working well. Thanks dev we appreciate all your work. Been driving this one around for a few days to see what was different -- speed. Still investigating but don't stop because you are the only HC dev that works on the kernal and the rom itself we definitely need more like you. Looking forward to your next works!
Kernel source needs provided as per GPL. All this looks like is a rebranding of someone else's kernel - to dispel that belief please provide source and changes or else this will be removed as it would be in violation of the rules.
edirector said:
No, it is working well. Thanks dev we appreciate all your work. Been driving this one around for a few days to see what was different -- speed. Still investigating but don't stop because you are the only HC dev that works on the kernal and the rom itself we definitely need more like you. Looking forward to your next works!
Click to expand...
Click to collapse
He would need a 'first' work to have any 'next' works. Someone who actually took the time to research a little web history might find that the guy is merely a thief of others' ideas and work. They might find that the guy also has multiple usernames and accounts on various threads, in different forums, and actually "talks to himselves" in those threads. They also might find that the guy is also pretty much clueless, and would have exactly a 0.0% chance of developing his own kernel.
I'm not saying they would, I'm just saying they might.
I'd run stock on my Gtab before I ever TOUCHED this.
Just sayin.
By the way, 'eDirector'...In no way was I implying that you could be just another one of linuxboxsolution's 'NPC's.
Of Course I wasn't.
REMOVED my post, as it's off-topic and no longer relevant.
roebeet said:
When I posted in the other thread, I did mention that I didn't know the history - I suppose this is the "other" thread that some had mentioned?
Again, I haven't delved into this kernels and mods, and I do agree mostly with what tlbardelljr had written - "stealing" is a very gray area here. Most of my own ROMs are just mash-ups of other people's work that I tried to make into something more usable for me, and possibly the community.
But, I usually try to give credit also. If I'm using pershoot's ROM, I document that. If I'm using gojimi's framework changes for Brilliant Corners, I give him a nod. If I'm using the Adam HC base for BoS, I give them a nod as well. It's not only good manners, but it's also part of the rules here. If you're going to take, you should give credit. It's not rocket science.
I am not saying that's what's going on here - I haven't looked into these allegations, myself. But jerdog had commented two days ago and I think his comment is not only valid but it's something that needs to be responded to by the OP. That would certainly answer the question and put this to rest.
Click to expand...
Click to collapse
Hello Roebeet,
This may help but I am not sure for I am not a developer...Git Hub Source Location: https://github.com/linuxboxsolution/LBSGtab. Boy I wish I was for I would be on my way to Silicon Valley with my latest brainstorm for the Android platform that's why I respect what you guys can do so much. I can package your coding, sweetly I might add, but I am not a coder.
REMOVED my post, as it's off-topic and no longer relevant.
Offended by what's going here!
Comments removed as promised.
REMOVED my post, as it's off-topic and no longer relevant.
**Last update! This thread will (shortly) be locked, and a new one will be posted With Galaxian-Soup ICS Alpha 2
Check back in a few hours!
**Update, this tread will be retired and locked come this Thursday 1/5/2012
Read between the lines, and you will see that a brand new thread in its place will be posted, complete with a yummy new alpha of ICS for our dedicated fans to enjoy... We thank you for your patience, after this alpha goes out we believe tere will be more frequent releases and postings
Stay tuned, but from what I've seen so far we have many surprises in store for our next release, and you, is ICS nirvana just around the corner? Check back on thursday!
Please don't take this to mean we've fixed every outstanding bug, but we have made major core improvements, and fixed some of the big "items"
We are seaking anyone with expeirence working HAL's and drivers.. if you are interested please PM me.
TTFN!!
** Update ** Work around for voice search
It appears that voice search is broken in several AOSP roms, during my research I managed to get voice search working, however its the older version (prior to ICS). So far it seems to work fine!
So until Google fixes (or we do hah) do this to get voice search to work
Download
Voice_Search_2.1.4
Go to the location the this file was downloaded and from a terminal (linux/mac) or the command prompt (windows)
Code:
adb shell
su (if not root)
rm /system/app/VoiceSearch.apk
reboot
Then side load adb Voice_Search_2.1.4
Code:
adb install Voice_Search_2.1.4.apk
After the install click on the microphone icon near search at the top left of the home screen, accept the permissions (you have to do this a few times, 3 by my count), don't panic if it asks a few times, it does stick.
Enjoy!
** Update** Happy New Year XDA and esp our friends with the Galaxy Tab 8.9! is this the year of the droid? We shall see!
Hey everyone I wanted to give everyone an update and general goings on! Im sorry to inform you that there will not be a New Years alpha, but we will have something for you all very soon after.
Here is a taste of what early 2012 will bring to Alpha 2.
1. We have decided to use ASOP source rather than Cyanogen Mod, this is primarily why there hasn't been a new release since xmas. After reviewing some of the initial bugs, and reflecting on what we accomplished in under 4 days, we decided we wanted the focus of this rom to become "best in breed" optimized for the Galaxy Tab 8.9. Meaning we are going to cherry pick the best features of both to create the best possible experience, with the lightest footprint, and most importantly stock ICS launcher! NoWiz, no Trebuchet. So far it has yielded very positive results.
2. Moving to ASOP and stock launcher has fixed one of the big bugs, automatic home screen orientation. I know more than a few of you were hoping this would be resolved fast, well there.. happy now?
3. MTD
4. General cleanup and optimizations have resulted in improved launcher response, it feels more fluid and less laggy...
5. Our repo is nearly finished, we are just ironing out some manifest bugs, when alpha2 arrives, so will our git links!
6. We have chosen a team name! Galaxian-Soup!
Thanks for supporting us, and we look forward to celebrating a "Droid 2012".
In the spirit of openness, if you would like to use our rom in your work please credit us in your OP and release notes. Our git repo should be up soon.
***Update*** Xmas Dinner Edition ***
Updated links to a 1.1 version, I added the livewallpaper.apks and re-zipped, no other changes.
and a newer version of Google Apps, seems to be more stable, but I've only been using it an hour, let us know!
Good Morning and Merry Christmas!
Is there something in your stocking for your GT7310? Well Santa Clause (in the form of _Motely, nycbjr, poisike, termleech (still need a team name!)) is delivering the first public alpha!
This build has been tested on the 7310 (Gtab 8.9 wifi, no 3g), and 7300 with no 3g (3g is being looked at).
Standard YMMV tag: You are flashing this at your own risk, make a nandroid backup first! If this breaks your tab we are NOT responsible.. now go play and have fun!
ICYXMAS-p5wifi-alpha1.1-cwm
icyGapps V2
Alpha V1 - ICYXMAS!
ICS 4.0.3_r1 vanilla
Rooted, deodexed,
Includes motley kernel v2e beta (see his thread for git details)
WiFi, GPS, Bluetooth
Installation:
In CWM recovery, clear your data/factory reset
Clear the dalvik cache (under advanced, or under the wipe menu in overcome cwm)
Flash the provided zip using CWM recovery
Flash gapps from CWM recovery
Bootup and setup your Google account
Install cpu control of choice, and set to interactive governor (this is required!)
*tested SetCPU, No-frills CPU control, and Antuantu.
Give it a chance, this is a deodexed ROM and will boot slow the first time and when you use apps the first time.
Doesn't work/Limitations:
WiFi-only, but 3G will be looked at for a future version (no ETA at the moment)
Camera doesn't work, don't know when or if it can be fixed.
Some video limitations, youtube HD vids not working. Some stuttering will occur until we get the kinks out.
Charger screen doesn't look correct when you plugin without booting up (charging status)
Voice search doesn't work - May have something to do with this error:
W/PackageManager(257): Failure retrieving resources forcom.google.android.voicesearch: Resource ID #0x0
Probably more that we haven't listed, this is an alpha - please let us know.
Team members:
nycbjr - project manager, dev (first working build), testing/troubleshooting
motley - lead dev, p5 device tree, final build, kernel development
poisike - pioneer testing with other tegra ICS ROMs, testing/troubleshooting
termleech - testing
Credits:
Google - for the releasing the OS
Cyanogen Mod Team - for their awesome git repo and developers. We used the p4 device tree as a starting point.
We would like to offer our p5 device if they are interested.
Samsung for the awesome device and kernel source (for HC 3.1 at least)
digetx - for pointing us in the right direction on the green frame buffer fix!
alterbridge - for his CWM Recovery port for 73xx.
JaeCar99 - for the sweet "Blue Hallway" bootanimation
I'm looking forward to a fully working ICS rom But a good thing takes time. Keep up the good work, guys!
great to see this development start
Sent from my HTC Incredible S using Tapatalk
Do you guys want some help? I'm currently working on a rom for the nexus with some other guys but could lend a hand here as well. What's the best way to get a hold of you guys?
Sent from my Full AOSP on Maguro using Tapatalk
termleech said:
Do you guys want some help? I'm currently working on a rom for the nexus with some other guys but could lend a hand here as well. What's the best way to get a hold of you guys?
Sent from my Full AOSP on Maguro using Tapatalk
Click to expand...
Click to collapse
I would never turn down any help, I'm very new at this (long time sysadmin, but only been a droid head since march hah).
Only caveat is you will need approval from motley before I can release anything to you, for now you can PM me and I will give you my aim/gchat and offline email, but I think we should setup an IRC, or aim/gmail chat to make this go faster.
As this is coming from CM9 sources I need to contact them too, I don't want to flub any licensing issues, etc, and maybe they will want to help, or us to help them!
Awesome! Thanks fellers!
great work
_motley said:
As far as WiFi, the P4 (Galaxy 10.1) uses a broadcom 4329 and we (the P5) uses the newer 4330. This is where the challenge will come it. When I get a better look at the Android code and have a flash up and running, hopefully it will become clear if something needs to be done on the kernel side or the Android side. If we start making good progress, we will need to get a git setup for our P5 stuff so we can share changes and files etc.
Click to expand...
Click to collapse
I don't know... I just flashed my P7300 with P7500 rom and wifi driver loads just fine. I only edited the build.prop and used a kernel from overcome rom, i didn't touch anything else. Also if you look in \system\etc\wifi you will see that both 7500 and 7510 roms have bcm4330 files there, so it looks to me that the wifi card is the same as our.
I also tried the kernel you sent me with 7500 rom and wifi driver still loads.
this is awesome guys.. after the posts yesterday and staying up till 3:Am , I got the sucker booting.. of course that was it though. Great to see this post today.. Sounds like it's not too far off.. at least for me wifi would be the only thing left that's important since I havent touched the camera app or bluetooth yet.
poisike said:
I don't know... I just flashed my P7300 with P7500 rom and wifi driver loads just fine. I only edited the build.prop and used a kernel from overcome rom, i didn't touch anything else. Also if you look in \system\etc\wifi you will see that both 7500 and 7510 roms have bcm4330 files there, so it looks to me that the wifi card is the same as our.
I also tried the kernel you sent me with 7500 rom and wifi driver still loads.
Click to expand...
Click to collapse
right, I'm going back over the source, and the board config, some wifi stuff seems commented out. I know I need to get on irc.. but work interjects lol..
for the record on linux to use broadcom it has to extract the firmware for the card, I don't think it has to for droid as in this case the firmware is provided to us. I should probably stop spinning my wheels and go back and read/learn more about how android treats these things.
I am all ears however, anyone with debugging exp can have the rom with permission to use the kernel from motly.
I don't think that the problem is in your build. I have tried 3 different builds and they all have the same error:
Code:
ERROR/WifiStateMachine(168): Failed to load driver!
ERROR/WifiStateMachine(168): DriverFailedState
So it looks to me that the problem is in kernel. Of course i could be wrong.
Also it looks to me that the bcm4330 driver source is posted on github (https://github.com/cyanogen/galaxy-2636/tree/ics/drivers/net/wireless/bcm4330), so i hope _motley finds time to take a look.
poisike said:
I don't think that the problem is in your build. I have tried 3 different builds and they all have the same error:
Code:
ERROR/WifiStateMachine(168): Failed to load driver!
ERROR/WifiStateMachine(168): DriverFailedState
So it looks to me that the problem is in kernel. Of course i could be wrong.
Also it looks to me that the bcm4330 driver source is posted on github (https://github.com/cyanogen/galaxy-2636/tree/ics/drivers/net/wireless/bcm4330), so i hope _motley finds time to take a look.
Click to expand...
Click to collapse
ok thanks I was looking at the source on my build system remotely, and the drive went oiffine, I think my ssd is going, so I'm going to get a new on on the way home. pisses me off!
Great work!
I'm seeing forward to try this out.
Gesendet von meinem GT-P7300 mit Tapatalk
poisike said:
I don't think that the problem is in your build. I have tried 3 different builds and they all have the same error:
Code:
ERROR/WifiStateMachine(168): Failed to load driver!
ERROR/WifiStateMachine(168): DriverFailedState
So it looks to me that the problem is in kernel. Of course i could be wrong.
Also it looks to me that the bcm4330 driver source is posted on github (https://github.com/cyanogen/galaxy-2636/tree/ics/drivers/net/wireless/bcm4330), so i hope _motley finds time to take a look.
Click to expand...
Click to collapse
Sorry, I misspoke, the 10.1 does indeed use the 4330 like us...been looking at Iconia, Xoom, and ASUS TF1 ROMs too much lately.
Well other than the green screen affect, wifi, camera,bluethooth this thing really runs well.
HC was a pig for memory, as I noted on my Acer when I ran ICS for a bit, memory mamagment is hugely improved over honeycomb, I never had more than 200mb free on a regular basis, with ICS its well over 400mb.
and the thing really cooks along, I snap in and out of screens really fast, and angry birds works! haha
I will spend some time tonight on wifi, and making a new build.
poisike I'll setup irc tonight, I may have to rebuild the macpro, who knew running an os other than apple would cause a problem lol..
_motley said:
Sorry, I misspoke, the 10.1 does indeed use the 4330 like us...been looking at Iconia, Xoom, and ASUS TF1 ROMs too much lately.
Click to expand...
Click to collapse
The otapackage build does spit out a file called "kernel" would that help you any?
I can drop it in my dropbox
actually there is a boot.img.cm9 in my alpha zip you have, but I can still upload just the file called kernel if yoi think it would help.
also once I have my macpro back in op I'm not against setting up accounts for you and poisike, or setting up our own git repo, would be beneficial to work against the same source once we zero in and attempt to create a working port for everyone.
oh and btw, your OC settings work, running ICS at 1.4ghz
This is great news!! Once the wifi is working, I'll be using this as my daily driver. Will this be a completely AOSP project or still based on TouchWiz. I wish I could have stock e-mail, calendar, etc.
Excellent news! I will be waiting patiently....
Asop only! "Don't wiz on my ICS"
Sent from my SGH-I777 using xda premium
nycbjr said:
The otapackage build does spit out a file called "kernel" would that help you any?
I can drop it in my dropbox
actually there is a boot.img.cm9 in my alpha zip you have, but I can still upload just the file called kernel if yoi think it would help.
also once I have my macpro back in op I'm not against setting up accounts for you and poisike, or setting up our own git repo, would be beneficial to work against the same source once we zero in and attempt to create a working port for everyone.
oh and btw, your OC settings work, running ICS at 1.4ghz
Click to expand...
Click to collapse
That sounds like it is just the zImage binary for their build, I think I remember seeing it there too. It won't do me any good. Sounds good about the repo. I can still browse the repos to look at code as necessary for the time being. Glad to hear that the OC is is still working good.
I just sent poisike a 3G kernel with the touchscreen fix so he can start working on that end.
"Don't wiz on my ICS!" haha
This is AOSP Gingerbread 2.3.7 built from source.
Thanks to Preludedrew and Gojimi(for all your help), Kornyone, The Cyanogenmod team, Leonnib4, roebeet, pershoot, and all the devs out there.
*YOU MUST DO A COMPLETE WIPE BEFORE FLASHING THIS ROM. If you get stuck on the "android" screen, in Clockwork, go to mounts and storage>format system and format data. Then wipe data/factory reset and wipe dalvik cache. Then reflash the Rom.
G-HARMONY GINGERBREAD v2.8
http://dev-host.org/N2i
*AOSP Gingerbread 2.3.7
*Zeam Launcher
*Stock Gingerbread Launcher
*Pershoot 2.6.32.48 kernel
*FLAC support
*GAPPS ARE NOW INCLUDED(Google Play Store is included)
*Power toggles in the Notification dropdown
*ICS Transitions
*Home,Menu, and Back soft keys
*Adhoc support
*Added code to support mouse pointer with bluetooth mouse from CM(untested)
*All apks were PNG optimized and are ZipAligned at boot
*ICS icons and Wallpapers
*Honeycomb Wallpapers(by GFX Android)
*Battery percentage in the notification bar
*Transparent notification pulldown
*Bluetooth HID for bluetooth keyboard, mouse and Wiimote support
*File Manager
Click to expand...
Click to collapse
Know issues: Youtube HD will not play.
Awesome. i'll give this puppy a try. EVERYTHING but HD video works on this?
Thanks
Downloading now, will run and let you know what I got. Thanks for the continuous work!
awesome lets see what we have here
Hi,
i am interessted to flash your rom on my tablet.
my question is:
will your rom work on the hannspad sn10t1?
do i have to flash a kernel for the hannspad if its work?
you typed that youtube hd video is not working, is this just a problem on youtube or is hw accelerating not working?
Great Job on this Rom!!! It's actually buttery smooth. loaded it up for my wife before I gave her my GTablet.
Thanks to everyone that left feedback.
I hate to add useless posts that just say that I am flashing it, so I'll say I'm flashing it and then ask if there is anything that you want us to look for or to try out for you. Looks solid so far, though I got FCs on the default keyboard. I'm clearing caches and such and trying again.
Edit: that worked. I'm good now. Just wish some apps could utilize the screen size.
So I am trying to flash this rom after removing CM7. However, Its been sitting at the "Android" screen for over 30 minutes. Does this use a different partition than the usual 2048 / 0 ?
I'm sure you can leave the 2gb/0 partition in, but you should reboot into CWM and clear caches and fix permissions first. If that doesn't work, wipe data too. It should boot fine then, probably just after another cache wipe.
Kocrachon said:
So I am trying to flash this rom after removing CM7. However, Its been sitting at the "Android" screen for over 30 minutes. Does this use a different partition than the usual 2048 / 0 ?
Click to expand...
Click to collapse
No it doesn't. Try wipe data/factory reset, then go to mounts and storage>format data and format system. Then reflash the ROM.
Hmm i get an incalid token response from the download link.
BootLoader
Hi...does it matter if I have a 1.1 bootloader? does this rom boot on 1.2? please clarify
In the title of this entire thread, says [BL1.2] so im assuming its meant torwards Bootloader 1.2, and not 1.1.
Thank you TJ for bringing something back, ive been wanting to let my younger family use the G-tab but i had nothing stable on it.
Your efforts are never overlooked. Ill report updates for other end-users, to help.
bionaraq said:
Hmm i get an incalid token response from the download link.
Click to expand...
Click to collapse
Yeah I might have to use something other than dev-host. I heard about the same issue from users of my ET4G ROM.
Sent from my SPH-D710 using xda premium
Jerome.Ramos said:
Hi...does it matter if I have a 1.1 bootloader? does this rom boot on 1.2? please clarify
Click to expand...
Click to collapse
1.2 only
Sent from my SPH-D710 using xda premium
docsparks said:
In the title of this entire thread, says [BL1.2] so im assuming its meant torwards Bootloader 1.2, and not 1.1.
Thank you TJ for bringing something back, ive been wanting to let my younger family use the G-tab but i had nothing stable on it.
Your efforts are never overlooked. Ill report updates for other end-users, to help.
Click to expand...
Click to collapse
What's up playa?? This release should be good for them. Let me know how it runs for you.
Sent from my SPH-D710 using xda premium
Awesome. I am using your previous GB (after tried almost all the ROM's around here) so maybe this will be my daily driver for now on!
Is there a chance to implement USB audio host on it?
LE: Installed without format. Just clean the cache and dalvik. Some apps needed to be reinstalled from back-ups.
All works well for now. Except Zinio - it does not want to log in anymore.
Updated to this rom this morning after experimenting with the ics rom. Even used CWM 5504 to load it and very smooth. Haven't tryed overclocking it yet, but will see how that goes. Can one replace the kernel with one of Clemsyn custom ones? I like pershot, but 1.6 mhz needs to be tested. Thanks in advance.
nobe1976 said:
Updated to this rom this morning after experimenting with the ics rom. Even used CWM 5504 to load it and very smooth. Haven't tryed overclocking it yet, but will see how that goes. Can one replace the kernel with one of Clemsyn custom ones? I like pershot, but 1.6 mhz needs to be tested. Thanks in advance.
Click to expand...
Click to collapse
Thanks. Yes you can switch kernels.
Sent from my SPH-D710 using xda premium
Here's a question.
and yes, I did read most of the A500 stuff before posting this.
I currently have CyanogenMod V 10.2, and a 4.2.2 kernel
Here's my question. I see in the recovery rom, an option to overclock.
how can I do this from inside the normal kernel? is there an option I just haven't seen?
I understand it needs to be be done inside the rom, but seriously, haven't seen any discussion on how to get this running on a regular basis.
thanks in advance
markbnj said:
Here's a question.
and yes, I did read most of the A500 stuff before posting this.
I currently have CyanogenMod V 10.2, and a 4.2.2 kernel
Here's my question. I see in the recovery rom, an option to overclock.
how can I do this from inside the normal kernel? is there an option I just haven't seen?
I understand it needs to be be done inside the rom, but seriously, haven't seen any discussion on how to get this running on a regular basis.
thanks in advance
Click to expand...
Click to collapse
Why not make it easy, download and install SetCpu or any one of the multitude of OC apps on the market, and just set your OC/UV from there? You can select "set at boot" and it will retain your selections in the event of a re-boot.
Not all kernels are capable of OC/UV. This is all dependant on if the dev compiled the kernel with the correct frequency and voltage tables to allow this.
The fact that the CWM recovery has options, has 0 impact if the OC can be done. The OC option is in every recent CWM recovery version regardless of kernel being installed.
So my advice, download and install an OC app from play store, and check if your kernel supports it.
One more bit of advice... do not select "set at boot" until you have checked out your OC/UV settings.
MD
Thank you very much. dumb Xnix person that I am, didn't think to check if there were any apps like that. will investigate.
markbnj said:
Thank you very much. dumb Xnix person that I am, didn't think to check if there were any apps like that. will investigate.
Click to expand...
Click to collapse
There are a ton of free apps. System Tuner, NoThrills, PimpmyCPU, etc. Personally, I like SetCpu (free version here at XDA, use search), and System Tuner.