Related
Hello all,
I think I may have bricked my nexus one. It is completely my fault for attempting things that I knew little about, so flame away But after the flaming, if anyone is willing to help I would be sooooo thankfull...
I successfully rooted my phone following the instructions on this page: (all links edited with a double asterisk as I don't believe I can post links)
h**p://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Then successfully installed cyanogenmod (which is awesome!) following this page:
h**p://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
All was well, I even got the modaco desire rom up and running, and was happily switching back and forth using the recovery screen. I had nand backups for specific setups, etc.
Then I decided it would be good to know how to go back to stock, and found this page:
h**p://**w.androidspin.com/2010/05/06/guide-unrooting-your-nexus-one-its-like-it-never-happened-almost/
I followed the instructions to the letter (I think) except for erasing userdata (it said "failed: remote not allowed"). I thought that things would be ok, since I'd recently wiped, so I followed the page till the end.
The phone rebooted, and I got the original nexus boot animation - but it's in an endless loop! What's worse, it that now when I try to go to the bootloader or recovery mode, I get the exclamation triangle with the little android.
Is there any way through a command prompt (or other method) that I can fix this? I tried to re-flash the RA recovery image through the command prompt, but the response was, "waiting for device."
ANYTHING that anyone can suggest to help, I would be so thankful! I've been loving the nexus, and hate to think that I crippled it
Thanks in advance,
Randy
I doubt its bricked.
Noticed you didnt mention that fast boot doesnt work? (power button+trackball) try it.
Once you get to fastboot you can flash any ROM back. (fastboot flash **** commands from a command shell)
Did you ever perform a Nand Backup from Recovery?
It's not bricked, the only way to brick is to interrupt power when flashing a Radio image
Connect phone to PC. Open command prompt.
adb reboot recovery
Wipe, reflash.
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
nexus5894 said:
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
Click to expand...
Click to collapse
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Paul22000 said:
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Click to expand...
Click to collapse
............................
It worked!!!!!
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Randy Malkoski said:
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Click to expand...
Click to collapse
Glad to hear it. You learn the most by trial and error.
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
revonomics said:
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
Click to expand...
Click to collapse
Tell me what i need to download again and how to go about it...i really need my phone working again ((((
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Go look in the developer section, one of the stickies, the one that talks about the nexus s 4g cdma. You might have flashed something that was meant for the gsm nexus s. It has links to correct files and guides for the sprint version of the nexus.
Pm me and I will help u over the I'm client of your choice.
Basically, I have no service, and no card, so since I can access Fastboot Mode, and unlocked, is there a way to push a rom direct onto Sprint phone.
I looked in Developers Forums, I am not ready to jump in with custom rom yet (I have used extensively on other phones) but would like to start with stock, go with root and programs as needed.
So how would I push to phone via computer? and what programs, again, no idea of commands to use.
Have you flashed CWM yet? You can use that to reflash the stock ROM. Worst case you can use this thread:
http://forum.xda-developers.com/showthread.php?t=1072698
That will bring you to 100% out of the box factory settings
If you can get into fastboot, then you didn't brick it. You'll be fine, you just need to get in touch with someone that can walk you through the process of fixing it. Or search around, read, and take your time to figure out what to do.
It's not hard. The worse thing you can do is panic or rush to fix it.
Basically what you did when using superboot was you actually installed a boot.img file not meant for your device on your phone. What you should do is, go through the guide for your specific phone...you will have to install a recovery image and then install a custom rom or stock rom.
I do not know if you know your way around with fastboot....basically you could also ask a dev to send you the original boot.img and flash it using fastboot but the first stepi described is easier.
Sent from my Nexus S using Tapatalk
nmoreman said:
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Click to expand...
Click to collapse
If you are going to waste your brand new phone by being stupid how about giving it to me instead! Ill take good care of it.
Sent from my PC36100 using XDA App
Here Try this and let me know if it work:
1.Download this platform-tools.zip and extract it to your desktop
2.Connect your phone to the PC and enter bootloader mode
3.Press and hold Shift while right-clicking the folder you extracted 'platform-tools'
4.Click 'Open command window here' from the pop-up menu. cmd.exe window will open.
5.If the Bootloader is Unlocked continue to the next step. Type in the cmd.exe window 'Fastboot oem unlock' and follow the steps on the phone screen.
6.Type in the cmd.exe window 'fastboot flash boot boot.img'.
7.Type in the cmd.exe window 'fastboot reboot'.
nmoreman said:
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Click to expand...
Click to collapse
THANK YOU, for answer, but it didn't work.
I downloaded, opened, opened cmd from there.
My phone is unlocked, setting there with unlock screen, put it in bootloader mode, but when I type in instructions, it comes back "not recognized as internal, external command, program, batch file"
This is the problem I had when trying to unlock, so reading, used Superboot, probably wrong phone, so now it is wiped and empty.
I also read another thread suggesting Odin in this situation. Have downloaded that, SamsungSimpleDL, followed those directions, that doesn't work either. I have hacked and rommed Epic, very familiar with that, if it works, but cannot point to proper files (pda, pit, or bootloader).
So any other ideas, I am very good at directions, that is how I learned
My Phone is Fixed - YEAH
This did not work, but this link did
http://forum.xda-developers.com/showthread.php?t=1072698&page=4
Basically used Odin (my old backup from Samsung Epic) and it worked when all these suggestions wouldn't.
I couldn't unlock easily, like all of these, therefore used Superboot. Would recommend no one touches that!!
I couldn't run any of the commands before this, and still couldn't use these.
So the instructions to dig thru the Developers section is correct, but so hard with so many customs, phones, carriers, to choose from. Makes it difficult
So use this link if stuck like me, I am just glad I con't have a brick, and I'm still pushing the Thanks button for all who helped, that's what will make this fun.
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Motorola published the factory files for Xoom awhile back so if you still have fastboot, you can recover from it.
http://developer.motorola.com/produ...utm_source=supportforums&utm_term=unlockboard
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Stop using one click crap. If you don't know what you're then you should not be messing with your device.
Sent from my DROIDX using XDA App
I can. Just won't.
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
albundy2010 said:
I can. Just won't.
Click to expand...
Click to collapse
And this is rude and uncalled for
The OP stated he read quides etc and none of it made sense to him etc. So instead of asking for help a explanation he tries a one click method. Which is stupid. He than softbricks the device and asked for help here.
Then he is told that moto released the factory images and use fastboot if he still has it to recover the device. He then decides to ignore that entirely and go back and try to unroot/restore with the one click BS again. Then he tries to use it again to go back to where he was. Just flat out stupid. He did something when he had no idea wtf he was doing. Was told what to do. Did not do it. He even said it is like Chinese to him.
So I told him to stop messing with one click crap. Which is correct. I told him to stop messing with the ****ing thing. Which is also correct. He needs to learn/understand wtf he is doing. Instead of basically button mashing/trying crap and hoping it will basically fix itself.
On top of that this posted in the wrong section. Uncalled for my ass. He is the one that was rude when told to not mess with the one click or the device. Now this part is rude. **** his stupid ass.
csseale said:
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
Click to expand...
Click to collapse
How do i get to that ..and where do i type it at ..i looked in device manager & does recognize the xoom..it says "Motorola USB Device:Motorola Flash Interface"..In properties under "Driver" it has options for driver details..update driver..disable & uninstall.Can i do anything with them?
I tried opening SDK manager but it never lets me type anything in the box as it's always trying to do some kind of update in another window so when i close the window it closes all of the windows.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If they didnt make sense to you in the first place you probably shoud not be attempting to root... U went straight to an old method that even the developer has marked in hs thread can full brick you and should not be used. The xoom costs like 600 bucks... Why wouldnt you do extensive research on how to root? If you did not understand the terms why didn't you research the methods and learn it?
I hope you can flash the factory imagines back through fastboot and adb, but i just do not understand why people attempt this stuff when they have no idea what the terms even mean...
You need to have sdk, hook up to usb on your computer, and follow one of the unlock guides posted on this site... A real one using adb... Then you need to follow a root one...
Sorry that is not more helpful, but half of this experience is that you need to learn what you are doing and the instructions are out there. If they do not make sense at this point im afraid you are stuck. Now the way your device is you have to figure it out...
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Please check out this thread.It is called Root heaven for a reason. Just about every viable rooting guide, all the files and explanations you will need are here.
http://forum.xda-developers.com/showthread.php?t=1209341
I urge you to just calm down, read about what is the sdk, what is adb, how to recover from a soft brick and so on. The xda xoom forum is all about learning and teaching. We were all noobies once. The Xoom is a very complex device with many models and vesions and one clicks just don't cut it. There are rooting methods that are relatively simple but you really need to be prepared before you get started.
Good luck and don't despair. You'll get there.
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Arun01 said:
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
at first, make sure you install android sdk correctly. then go to android sdk-folder in your computer, u will find a folder named platform-tool. Press shift+ right click on it, then choose open command window here. After that, type in "adb devices" or "fastboot devives" to check if your xoom is connected. If yes,you good to go. If no, check your android sdk installed process
After i type in abd devices it says list of devices attached but shows nothing..i did copy the sdk tools folder to the c drive like i was told.
@OP
If you can't do it yourself, getting somebody to help you (in person) is always an option. If you live in a major city, advertise on Craigslist or some equivalent. Offer $50 for debricking + some tutorial.
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
That's good advice...no reason to re-lock. But get back to square one so that you're functional and then when you're ready to try again, do it the right way.
Again, good luck!
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
Thanks a lot.I was able to unlock it then it rebooted & stopped at the Motorola screen then i started the 1st command: fastboot flash boot boot.img & it says waiting on device..but nothing happens so far.Should i move on to the next step or retry?
The touchscreen on my Fire stopped working today. I already talked to Amazon and am getting a replacement, but I want to revert back to stock before sending it in. I've seen ways to do this with TWRP, but I don't have a touchscreen to use TWRP, or any recovery for that matter, with.
Is there any way to do this?
I do have full ADB and Fastboot access, with FireFireFire working, but do not have a currently working rom installed (I was on CM9, and it won't go past the boot screen).
drk.hd said:
The touchscreen on my Fire stopped working today. I already talked to Amazon and am getting a replacement, but I want to revert back to stock before sending it in. I've seen ways to do this with TWRP, but I don't have a touchscreen to use TWRP, or any recovery for that matter, with.
Is there any way to do this?
I do have full ADB and Fastboot access, with FireFireFire working, but do not have a currently working rom installed (I was on CM9, and it won't go past the boot screen).
Click to expand...
Click to collapse
There is a way to do this with adb... I just do not know the proper commands. Sorry
Does installing a custom rom void the warranty? Seems like it would be BS for Amazon not to honor it when it's apparently a hardware related issue.
sengwall said:
Does installing a custom rom void the warranty? Seems like it would be BS for Amazon not to honor it when it's apparently a hardware related issue.
Click to expand...
Click to collapse
No, I don't think it does, but I'd rather not take the chance.
drk.hd said:
No, I don't think it does, but I'd rather not take the chance.
Click to expand...
Click to collapse
YES! It absolutely does. The second the device was rooted it broke warranty.
Sent from my myTouch_4G_Slide using XDA App
The same thing actually happened to me earlier today. I was just browsing some sites on the ICS rom when it just stopped responding. I couldn't get it to recognize any touches even after a bunch of reboots, so I just figured it to be some bug that hadn't been squashed yet. When I dropped down to recovery and saw the same issue, I knew I had a real problem.
Hoping against hope, I tried both CWMR and TWRP on it and got no results. Like you, I figured it would have to go back to Amazon, so I started searching for a way to get it back to stock... nothing obvious jumped out at me because everything is written with access to recovery in mind... which doesn't help.
So, I started reading about adb and going through the built-in help. As I was familiarizing myself with some basic adb commands and options, I left TWRP open in front of me. I don't know how long I had it that way when I mindlessly tapped on the screen and thought I saw it flicker. Yes! I had pressed the Wipe button and it had taken me to that section. It's been working fine ever since.
I'm not claiming I did anything and I don't have a how-to on how to fix it, but it couldn't hurt to just leave the thing running in recovery for a while and see if the touchscreen comes back to life for you too.
Still, I'd love to see someone with more adb knowledge provide a simple tutorial on how to get it back to stock without access to recovery. I'm sure it would be helpful to someone in the future... maybe even me if the same problem comes up again.
Best of luck to you.
Just ignore my comment
Sent from my Amazon Kindle Fire using Tapatalk
If your on the rooted stock rom you could always wait until Amazon pushing the next OTA
You will have to make a fastboot image and flash that with fastboot. But before you create the image, you will have to create all the appropriate symlinks. Then you run...
Code:
make_ext4fs -l 512m -a system -s /path/to/fastboot_system.img /path/to/system_folder
That will create the fastboot image. Then when FFF gives you fastboot access, you run...
Code:
fastboot flash system fastboot_system.img
You will also need a fastboot image for recovery and the bootloader.
Isn't there any easy way like with my desire, simple ruu.
Or hasn't anyone created these images to flash. I also need to get back to stock everything and send it to amazon, my wifi gets error after some period of time and some times when screen goes off, try'd 3 roms and stock.
There is a way to tell the device to install /sdcard/update.zip via shell commands. I forget what they are tho. Something about the extendedcommands. If I have time tomorrow I'll look it up.
here it is:
http://www.theandroidsoul.com/kindle-fire-stock-rom-installation-guide/
b63 said:
here it is:
http://www.theandroidsoul.com/kindle-fire-stock-rom-installation-guide/
Click to expand...
Click to collapse
Thanks for the link. I'm back on this thread because I think my Kindle Fire touchscreen is now dead for good. However, those instructions do not work as-is because you need to press a button on the screen to tell the Kindle Fire to allow the host to mount it as a USB Mass Storage device. Although those instructions don't get you all the way there, I was able to use the core idea to get my Kindle Fire back to stock. So, many thanks for pointing me in the right direction.
On top of the touchscreen not working, I ended up partially bricking the device trying to find a way to flash it back to stock, so I had also posted in the Unbricking thread. I posted my solution there....
http://forum.xda-developers.com/showpost.php?p=23226260&postcount=701
Odds are, if you have a device that is booting correctly, you will be able to ignore steps 3 and 4 and get it booting back to stock. I do have a couple of other suggestions... Leave your USB cable hooked up to the Kindle Fire as it boots into stock for the first time. This is the only time that it will automatically mount the /sdcard to your computer and you will have a chance to reclaim (and delete) all the files stored there. You can also do something like 'adb pull /sdcard C:\sdcard' before you flash. Also, depending on what ROM and apps you were using before starting the process, you might want to delete your user data and reset the device to factory defaults. You can do this with 'fastboot erase userdata' and the next time you start the device, you'll get a warning that it's about to reset. Hit the power button and you should have a clean, fresh from the factory Kindle fire... albeit with a broken touchscreen. Good luck!
After several failed attempts to follow this guide (no offense to posters; I appreciate your contributions), I found this to be the simplest method.
http://stackoverflow.com/questions/10817721/wipe-data-factory-reset-through-adb
Download stock update, then it's basic procedure in adb:
adb push C:/update.zip /sdcard/update.zip
adb shell
recovery --wipe_data
After reboot, go back into to adb shell and do "recovery--update_package=/sdcard/update.zip"
Factory reset, etc. and you're good to go.
I flashed the Eclipse ROM via safestrap and then restored the Eclipse ROM onto the stock ROM slot. For some stupid reason, instead of restoring the stock ROM slot before resetting the phone back to stock, I opted to use RSD Lite 6.1.4 and tried to flash the JB firmware (yes, I got into fastboot). When I tried to do this, the phone reboots past the Motorola M insignia, to the droid startup screen (with the flashing red light/circle), but does not get past the startup screen (yes, I gave it 30+ minutes to no avail). I also tried to reflash the JB firmware, but no matter what, I ended up stuck at the bootup screen.
For this reason, I tried to flash the ICS firmware instead (per instructions on XDA and other websites, I removed the lines in the XML file that had the word var, getvar, and oem). This did work! However, after RSD flashed the firmware, rather than restarting into the OS, the phone reboots into a black screen w/ the phrase "Fastboot Reason: Sticky bit factory_fastboot" at the very bottom. Anytime I try to restart the phone, it automatically boots into this screen. If I hold the volume up and down buttons, together w/ the power button, I am able to get back to the option to start normally.
When I tried to do the OTA JB update, the phone downloads the necessary files, but when the phone tries to reboot to install the OS update, it goes back into that black screen and does not install the update. Also, when I finally do get back into the OS, the phone then constantly reboots as if it were trying to install the OTA JB update.
Does anyone know what "Fastboot Reason: Sticky bit factory_fastboot" means? Also, if anyone knows how to "fix" this issue, I'd greatly appreciate it. If the fix requires command line work (like in this thread), I'd greatly appreciate if someone could walk me through it step-by-step, as I am not familiar w/ the command line process.
Thanks!
Edit 1: The next step I will try is to get root back on my phone, install Safestrap, and see whether I can flash a backup that I previously had.
Edit 2: In some threads for other Moto phones, there is some discussion regarding using ADB to fastboot/flash the stock ROM. Anyone know how this is different from using RSD? Also, can anyone walk me through HOW to ADB? I have zero knowledge in this regard.
Have you tried holding the buttons down to enter fast boot again and reflash? Worth a shot if you haven't. You could also attempt a factory reset from the boot menu. Maybe the corrupt file would correct itself.
You should definitely take the time to learn some ADB; at least a working understanding. It helps down the road.
Here's a good tutorial on ADB commands. http://mobile.tutsplus.com/tutorials/android/android-adb-quick-guide/
And to install ADB without Android SDK (app production software) http://mobilecon.info/install-adb-in-windows.html
Sent from my Nexus 7 using xda app-developers app
skippid said:
Have you tried holding the buttons down to enter fast boot again and reflash? Worth a shot if you haven't. You could also attempt a factory reset from the boot menu. Maybe the corrupt file would correct itself.
You should definitely take the time to learn some ADB; at least a working understanding. It helps down the road.
Here's a good tutorial on ADB commands. http://mobile.tutsplus.com/tutorials/android/android-adb-quick-guide/
And to install ADB without Android SDK (app production software) http://mobilecon.info/install-adb-in-windows.html
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes, I attempted to reflash on multiple occasions, both using the stock ICS and the stock JB roms. I must have reflashed close to 10x at this point. In any case, no matter how often I have reflahsed (including after doing a factory reset from within the OS as well as from within recovery), I still get the error. The good news is that I was successfully able to flash the JB ROM and have the phone OS actually start up, whereas, a few days ago, it would be stuck at the red circle/eye thing.
Furthermore, I attempted the command fastboot flash system [system.img], and I got the error:
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
error: cannot load '[system.img]': no error
I saved the system.img in both c:\android, as well as the internal SD card of the phone.
The other good news is that I am still able to use the phone if I get into the boot menu and ask the phone to boot normally. However, I am now unable to get root, and anytime I need to restart the phone, it gives me that error message.
I have also tried the command fastboot reboot bootloader but continue to get the same error message.
OK. Find a JB leak zip or current stock JB zip, access the screen where it asks for AP Fast boot and recovery, choose recovery, then volume up I believe when the phone shows the android with the red exclamation point.. Then choose update with zip. Search your SD card and install. It's worth a try in this manner in case you haven't already.
That's odd that your phone didn't respond well with RSD.
Sent from my XT907 using xda app-developers app
You need to use an updated fastboot binary for the new larger images in these devices.
http://db.tt/AveMC40y
skippid said:
OK. Find a JB leak zip or current stock JB zip, access the screen where it asks for AP Fast boot and recovery, choose recovery, then volume up I believe when the phone shows the android with the red exclamation point.. Then choose update with zip. Search your SD card and install. It's worth a try in this manner in case you haven't already.
That's odd that your phone didn't respond well with RSD.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Skippid, thanks for the suggestions. I tried your method as well. Went into recovery, selected to update from external SD (or something to that effect), selected the JB zip file, and let it flash that way. Unfortunately, I still received the same error message regarding the sticky bit factory_fastboot.
cellzealot said:
You need to use an updated fastboot binary for the new larger images in these devices.
http://db.tt/AveMC40y
Click to expand...
Click to collapse
cellzealot, thank you for the link. I've downloaded the file that you linked to. Could you be so kind as to now give me a step-by-step on how to re-attempt the flashing process?
Quick update - I was able to get root back, installed safestrap, and flashed the nandroid that I had made back when I first flashed Eclipse. However, I am still having the same issue:
Whenever I restart the phone, I get the sticky bit factory_fastboot error. If I use the command fastboot continue, the phone boots up as normal; however, it would be great to not have to do this each and every time I reboot the phone. Any help would be greatly appreciated. Thanks!
More updates (still not fixed):
After getting root, I reflashed my nandroid, factory reset (both within the OS and in recovery), and then tried flashing both the ICS and JB stock ROMs. I tried flashing both using mfastboot, as well RSD Lite. The files flash successfully; however, whenever I restart the phone, I continue to get the stick bit factory_fastboot error.
Also, when I get into recovery, I try to flash via "update from external SD". When I do so, recovery simply restarts without flashing the stock ROM.
Here's my last update as to this issue:
After trying all of the methods that I could think of (RSD Lite, flashing via fastboot and mfastboot, flashing from external), the problem did not correct itself.
I brought my phone into a Verizon store, where they told me that they had never seen that problem before. They agreed to replace my phone pursuant to the one-year warranty (I received my phone in December), which I received today. I've again rooted my phone, but have opted to not screw around w/ safestrap and custom ROMs this time around, as I find the stock JB experience to actually be quite good.
Found the soultion!!!!!!
Ok guys so after serching a while I found out similar moto phones have the same issue. I found in a latin forum and in a Droid forum people ponting to the same issue. So the solution that worked for my Razr HD xt925 was:
1) Enter fastboot mode in your phone (very easy since every time you restart the phone you end there anyways)
2) Write this command on the computer: fastboot oem fb_mode_clear
there will be a dialogue with the time take and OK
You are done!
Thought someone might find it useful
Thank you!
cerafio said:
Ok guys so after serching a while I found out similar moto phones have the same issue. I found in a latin forum and in a Droid forum people ponting to the same issue. So the solution that worked for my Razr HD xt925 was:
1) Enter fastboot mode in your phone (very easy since every time you restart the phone you end there anyways)
2) Write this command on the computer: fastboot oem fb_mode_clear
there will be a dialogue with the time take and OK
You are done!
Thought someone might find it useful
Click to expand...
Click to collapse
Thank you! This was the answer I needed after searching and searching trying all the different things for over 3 hours, this 2 second fix worked!
Namanati said:
Thank you! This was the answer I needed after searching and searching trying all the different things for over 3 hours, this 2 second fix worked!
Click to expand...
Click to collapse
#8 > http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
ATTACK said:
#8 > http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
Thanks, but that didn't come up when I googled AP Fastboot: flash failed, and since I didn't get it from rooting or unlocking my phone I didn't think to look for that.
cerafio said:
Ok guys so after serching a while I found out similar moto phones have the same issue. I found in a latin forum and in a Droid forum people ponting to the same issue. So the solution that worked for my Razr HD xt925 was:
1) Enter fastboot mode in your phone (very easy since every time you restart the phone you end there anyways)
2) Write this command on the computer: fastboot oem fb_mode_clear
there will be a dialogue with the time take and OK
You are done!
Thought someone might find it useful
Click to expand...
Click to collapse
Oh my god dude thank you so much. That fixed my bootloader issue that was plaguing me for weeks
Thanks again!!!
cerafio said:
Ok guys so after serching a while I found out similar moto phones have the same issue. I found in a latin forum and in a Droid forum people ponting to the same issue. So the solution that worked for my Razr HD xt925 was:
1) Enter fastboot mode in your phone (very easy since every time you restart the phone you end there anyways)
2) Write this command on the computer: fastboot oem fb_mode_clear
there will be a dialogue with the time take and OK
You are done!
Thought someone might find it useful
Click to expand...
Click to collapse
Thanks Man You really saved my razr.:good:
Edit : Sorry I asked stupid question!
Pierro29 said:
Edit : Sorry I asked stupid question!
Click to expand...
Click to collapse
there are no stupid questions if you question its because you dont know something and would like to fulfill the empty space where a reasonable answer could go. and s thanks for the solution to this error.
Okay, I have a "stupid"/newbie question. I flashed an image and I am getting the sticky boot thing. How to a get to a window to type the lines in?
Thanks!
cerafio said:
Ok guys so after serching a while I found out similar moto phones have the same issue. I found in a latin forum and in a Droid forum people ponting to the same issue. So the solution that worked for my Razr HD xt925 was:
1) Enter fastboot mode in your phone (very easy since every time you restart the phone you end there anyways)
2) Write this command on the computer: fastboot oem fb_mode_clear
there will be a dialogue with the time take and OK
You are done!
Thought someone might find it useful
Click to expand...
Click to collapse
Hey dude ! You save my life
Awesome trick