I need your help please. I have relatives in Vietnam who are computer illiterate. Their webcam recently died. I need 2 things.
(1) A camera that doesn't need driver install on windows vista. I need a webcam that is good and will just plug and play.
(2) I need to know where I can order this camera that will ship directly to Vietnam.
I'm sure someone here knows. Thanks.
Related
Please help me solve infrared problem with my device since i am not able to sync using IrDA. This is a problem that I cannot resolve and I wish that somebody could really help me and tell me the possible resolutions taking into consideration that I dont have any keyboard or any external hardware attatched to my pocket pc So please I would appreciate Any assistance.
Zimo
I have similar problem with AT&T PPC2002 (XDA developers Special Edition ROM v1.2). The phone was bought with this ROM, so I didn’t try with other versions.
When I run ‘infrared receive’ application or try to beam any file my phone simply hung till I soft-reset it. It may be the conflict with other programs but I not sure. How to check who else uses IRDA and how to remove those programs/conflicts?
Help please
the idea is that can any body from the developer team help us ?
Haloo zimo,the main idea here is that you should make sure of
1)the Ir port on you PC or lap top is working as some IR ports does not work with all devices like Y140 "SigmaY140"
2)You should start the active sync from the device not the pc
I hope my experince with your problem give you help ,if you need more help you can contact me (I live in cairo too)
I am still trying to find a way to assign a "virtual" port to the irda, I am trying to get tomtom2 working with an infrared gps connection but if I choose infrared port it locks the machine up, beams is unchecked, tomtom will work on any ipaq with tomtom irda after choosing the "generic irda" port shown in gps settings. Any help appreciated.
i good thing to try is to see if you can beam stuff to the pc
when i want to connect i
choose the Infrared receive
in programs then i place the xda about
10cm from the infrered port on the
pc
then i go back to the today of cause leaving the
infrared receive running
and i try to beam and it works
then i open activ sync and choose connect using infrared
and ....
I have the very current asian rom. But am still having the same problems with IrDA connections. The device would refuse any transmission from the pc running XPpro. Don't know why. After installing 'Peacemaker', it worked seamlessly.
The bugging question. Why does it need an aftermarket software to run on the device where the IrDA drivers comes stock standard with microsoft?
The best part is, my old nokia7650's IrDA works flawlessly with my pc without any additional software.
IrDa = Forsaken child in this high powered enviroment?
My problem is solved
I have sent my device to my local dealer and it was repaired with my waranty certificate. In fact it was found that the IR port of my XDA II was faulty , and they replaced it !
I do not think its the IrDA being broken. Much more like the s/w driver's fault as I could get it to work with Peacemaker s/w.
Though I do not use it often, it still gets on my nerve knowing that there's a flaw in the upgraded rom. Have to wait for another 6mths before I could return to my home country and send it for a checkup. Sigh....
I could not get my xda 2 to accept beamed file from my xda, if I choose receive from ppc200/hpc on xda 2 under setting/beams, it works properly but gives a failed error even though the contact/file is copied.
Hi,
My mini-B usb female connector (for charging and usb connectivity etc) is broken...
I need to find a replacement,
but I don't know what model it's exactly..
I don't what to end up ordering something I can't use :]
Can anyone help me?
Thanks!
What is the Make/Model of your phone. Either you can send it to the original manufacturer/vendor if still under warranty or you can order from ebay.First know the maker and model No # of your phone like T-mobile,cingular,i-mate or At&tt etc and model like T-mobile MDA,vario, etc etc,ok
Cheers !
I have mine from www.techcenter.fr
It's an HTC Wizard, Wiza200. (Qtek in fact)
Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck
bioChaz-
My USB connector is broken as well. Have you replaced one yourself? I want to know how hard it would be to do, because I'm thinking of ordering the part and attempting it.
what about ppc techs. they repair and sell that part.
I've done it a bunch of times...it definitely takes a few trys before u get it right...if ur familiar w/ soldering then it should be fairly easy, but if not...it might be worth paying some one to do it for u...if the pads are ripped from the motherboard then they have to be retraced...that is even harder...then it is worth paying to have it fixed for sure...otherwise, there is always the upgrade
upgrade? i wish. bought mine off the streets. thanks
bioChazTBO said:
Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck
Click to expand...
Click to collapse
I knew I'd be able to get this part from DigiKey/Mouser, but I was just never sure which was the right one so I never bothered.
Thanks!
Help, the mini usb port (plug) in my tilt has broken, and I cannot connect the phone to my pc. I am living in Venezuela where this phone is not in the market, and I cannot find the spare part. Who can tell me where can I buy one?
thanks for the help
Here is a service to fix it however it requires you to mail your phone to them. Its USD $79.00 and that includes parts and labor.
http://www.pocketpctechs.com/main~u...Kaiser+Sync+Connector+Replacement+Service.htm
Thanks a lot i wrote them tring to buy only the spare part since it is a trouble to me sending the phone to USA.
If anyone else can give to me further addresses I will apreciate it.
I want to be able to plug a standard usb webcam "type" device into my A500.
I bought off a usb microscope off Ebay. It is recognized under windows xp - 7 as a usb hid device. It did not even come with a driver disk, since everything recognized it automagically. I tried it last night under 3 different linux distro's and they detected it with no issue.
Does anyone know of a way? It would be so much easier to carry the tablet with me, vs a laptop, not to mention much better battery life so I can be in the field longer without a recharge.
I think the A500 needs root for it to go into host mode. Do you have it rooted? I don't think I have heard of any webcam device working on Android with a simple plug and play, but who knows.
[email protected] said:
I think the A500 needs root for it to go into host mode. Do you have it rooted? I don't think I have heard of any webcam device working on Android with a simple plug and play, but who knows.
Click to expand...
Click to collapse
Oh yeah I'm rooted, running a custom rom. I'm not scared to get my hands dirty either if someone knows of a solution
Hello, I'm looking also to find a solution for a webcam. But no lock so far.
Once I tried one on a older tablet running 1.6 and it worked but as it had the drivers build in loaded but I had to use a special camera apk.
So I think we need to have two things (maybe this is obvious for you)
1) the correct drivers loaded (we need to find them)
2) The correct app that let us choose the usb camera as I think they enumerate starting as 0... Or can create one
But to me the hardest part is finding the correct drivers.
Could you share the a link to that ebay microscope ? I might get one of the same so we can play with the same thing.
Thx
Newbie here. I have searched but did not find a solution to this.
I would like to attach a webcam to my phone or tablet and broadcast it to a colleague in another location.
Thank you for any help you can provide.
Use the included otg adapter and plug your webcam in. Check if it works not sure. You can still use the cameras on the phone.
Your phone already has 2 great quality cameras, i don't see the need to attach another