Related
Sorry if its a noobie one but have rooted my 101 Andrew would like to clock past the 1Ghz level.Can someone point me in the direction of a tut or give me a quick heads up?.Tis for any help.
Sent from my GT-I9100 using XDA App
stigslim said:
Sorry if its a noobie one but have rooted my 101 Andrew would like to clock past the 1Ghz level.Can someone point me in the direction of a tut or give me a quick heads up?.Tis for any help.
Click to expand...
Click to collapse
You have to install the OC Kernel by ardatdat here: http://forum.xda-developers.com/showthread.php?t=897877
Or you install Urukdroid (our only rom) with the OC-Kernel (i think this would be the better option)
What do you want?
I could give you instructions
Well from what I have read I could go upto about 1.2 Ghz to give it a little more zip. Is the rom any good?. Would probably go for the kernel. Ideas?
Sent from my GT-I9100 using XDA App
stigslim said:
Well from what I have read I could go upto about 1.2 Ghz to give it a little more zip.
Click to expand...
Click to collapse
Yeah, thats right
Is the rom any good?. Would probably go for the kernel. Ideas?
Click to expand...
Click to collapse
The rom is very good
but when you just want the kernel..
first: what firmware version do you have?
Now you say the roms good maybe I should give it a go. How much of an improvement is it?
Sent from my GT-I9100 using XDA App
stigslim said:
Now you say the roms good maybe I should give it a go. How much of an improvement is it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Much
You have EXT4, that makes everything a little faster, you have root (Chainfire for HD games...) and such stuff, you can overclock, and with the libq modifacted kernel from sibere you have a real speed boost
i would try it
Ok will give it a go can you point me at a noob proof tut. Would really like to give it some extra speed.
Sent from my GT-I9100 using XDA App
stigslim said:
Ok will give it a go can you point me at a noob proof tut. Would really like to give it some extra speed.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Here i haved copied the installation instructions for you:
Code:
Step one
Assuming you have already installed SDE from Archos:
Download and extract installation files from archive UrukDroid_1.0-EasyInstall.rar. Inside you should find three files: initramfs.cpio.gz, zImage and UrukDroid-install.tgz
Flash initramfs.cpio.gz and zImage from SDE boot menu:
power on (2) Archos device, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose with Volume +/- (1) "Recovery System"->"Developer Edition Menu"->"Flash Kernel and Initramfs",
connect Archos to PC (5) and copy zImage and initramfs.cpio.gz
press power button (2) shortly, you should see Archos flashing new kernel
if flashed properly, press power button (2) shortly to reboot...
Boot to SDE:
power on (2) Archos, hold up/+ volume key (1) until you see "Archos AXXXX - Boot Menu",
choose "Developer edition"
You should see "UrukDroid 1.0 Installation framework" title. Please choose simple install method. When asked to, connect Archos to PC (5) once again and copy UrukDroid-install.tgz, disconnect Archos from PC properly (umount, safely remove device etc.) and press power button (2) shortly. Now EI will check installation file and prepare it for next step.
Later, you will be also able to choose whether you want to copy /data partition. It's recommended not to - but you have this option. For advanced install method - look below.
After reboot you should see UrukDroid 1.0 boot up screen (if it happens to boot to stock OS, reboot once again and go to "Boot menu", choose "Developer edition").
You should see some progress information on bottom of the screen. For few minutes you will see installation message with progress bar. Few minutes later, after some postinstallation procedures you should see UrukDroid boot animation and shortly after Archos setup wizard.
If with first run "Archos configuration wizard" creates "Force close" errors, please reboot device (hold power button shortly for more than 1 second, this will bring "Power menu" and press power button long until "Reboot" message will appear).
Congratulations! you have just installed UrukDroid
Here is a video how-to:
Thanks, will give it a try later and will post back to let you know how I get on.
Sent from my GT-I9100 using XDA App
stigslim said:
Thanks, will give it a try later and will post back to let you know how I get on.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Okey, if you got questions post them
right i am back.Well spooned it first time lol got noting but a boot to Recovery menu now i dont know what to do.Tried all the options and got nothing helpfull.Just keeps booting to recovery whatever i choose.Any help? thought i had got it nailed then make a booboo lol.
Update, i have managed to install and can boot it from developers editiom menu but get the error
UrukBoot 0.7 Boot ERROR: Failed to mount rootfs /dev/sda2 (255)
UrukBoot 0.7 Boot ERROR: Repairing rootfs finished. Please reboot...
After which i just get the same again and again.So close i can smell it lol, any help you can offer is greatly appreciated.
stigslim said:
right i am back.Well spooned it first time lol got noting but a boot to Recovery menu now i dont know what to do.Tried all the options and got nothing helpfull.Just keeps booting to recovery whatever i choose.Any help? thought i had got it nailed then make a booboo lol.
Update, i have managed to install and can boot it from developers editiom menu but get the error
UrukBoot 0.7 Boot ERROR: Failed to mount rootfs /dev/sda2 (255)
UrukBoot 0.7 Boot ERROR: Repairing rootfs finished. Please reboot...
After which i just get the same again and again.So close i can smell it lol, any help you can offer is greatly appreciated.
Click to expand...
Click to collapse
Are you sure you downloaded the correct files? You want to use Urukdroid 1.0, not 0.7. The link is here: http://sauron.pourix.com/UrukDroid/UrukDroid-1.0/UrukDroid_1.0-Install.rar
The install instructions are here: http://code.google.com/p/urukdroid/wiki/Installation
It shouldn't take more than fifteen minutes from the point of having the SDE installed, to having Uruk fully running.
Well your probably right, don't think I started with 1.0 . I started with the easy installer but I think it was 0.5. Do you think this is the problem?. Will give it another try later with 1.0, is your link to the easy installer version?.
Sent from my GT-I9100 using XDA App
stigslim said:
Well your probably right, don't think I started with 1.0 . I started with the easy installer but I think it was 0.5. Do you think this is the problem?. Will give it another try later with 1.0, is your link to the easy installer version?.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yep, and yep.
Thank-you, at work right now so will only be able to have a go later. So watch this space I could be back .
Sent from my GT-I9100 using XDA App
Still no luck im afraid.Still getting the same error with V1.0.Any more ideas?.
stigslim said:
Still no luck im afraid.Still getting the same error with V1.0.Any more ideas?.
Click to expand...
Click to collapse
You said it was an A101, right? It should work fine. What method are you using to install? Easy or Advanced? Do you have an SDcard in the slot? When you tried with 1.0, what was your exact procedure. In other words, more details please...
Could you tell me how to OC 1.2 with Uruk 1.0 ?
Hi,
I'm new here and new with Android too . I'm a PC guy. I've had Urukroid 1.0 installed in my Archos now (in internal). I'd like OC to 1.2 GHz but I don't know how to do it with OC kernel by ardatdat. Can you show me? Thanks!
Lenn said:
You have to install the OC Kernel by ardatdat here: http://forum.xda-developers.com/showthread.php?t=897877
Or you install Urukdroid (our only rom) with the OC-Kernel (i think this would be the better option)
What do you want?
I could give you instructions
Click to expand...
Click to collapse
steven20052009 said:
Hi,
I'm new here and new with Android too . I'm a PC guy. I've had Urukroid 1.0 installed in my Archos now (in internal). I'd like OC to 1.2 GHz but I don't know how to do it with OC kernel by ardatdat. Can you show me? Thanks!
Click to expand...
Click to collapse
The ardatdat kernel is not compatible with Uruk, that's why he said either/or. As of a couple days ago though, there is a new alpha OC kernel for Uruk: http://dl.dropbox.com/u/1017593/ArchosGEN8/UrukDroid-1.1/UrukDroid-1.1RC1-kernelOC.tbz2
msticninja said:
The ardatdat kernel is not compatible with Uruk, that's why he said either/or. As of a couple days ago though, there is a new alpha OC kernel for Uruk: http://dl.dropbox.com/u/1017593/ArchosGEN8/UrukDroid-1.1/UrukDroid-1.1RC1-kernelOC.tbz2
Click to expand...
Click to collapse
Yes, but sauron said, that these (1.1RC) kernel made problems for 1.0 users...
But i saw an working oc kernel on urukdroid dev thread anywhere..
Well, I downloaded"G3MOD v2.0.rar"
When i extracted the file i got "system.img" usually it's .tar
I couldn't flash it with Odin
And the instructions to install the ROM isn't mentioned.
1) Install G3Mod 1.7 (Pick a edition out of the 4).
2) Copy system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
3) Go into the recovery mode (shutdown the phone, press VOL UP + VOL DOWN + HOME + POWER button to start the phone, when GT-I5800 text pops up release the POWER button and keep on pressing VOL UP VOL DOWN and HOME buttons until you are in recovery screen).
4) Go into Multiboot and select the G3MODv2_ROM and let the phone boot up. Might take several minutes.
aced443 said:
well, i downloaded"g3mod v2.0.rar"
when i extracted the file i got "system.img" usually it's .tar
i couldn't flash it with odin
and the instructions to install the rom isn't mentioned.
Click to expand...
Click to collapse
hey bro relax.. We r here to help u in every possible way.. But first i need to know uer phone specs in order to help u.. Try to edit uer signature.. Second image file of g3mod is for g3mod 1.7 kernel it has a multoboot facility. All u do is "flash g3mod kernel 1.7" and see the magic.. And dont forget to thank dharam(its his kernel) when u dwnload it.. Glad to help.
Guys its not working for me!!
I flashed G3MOD 1.7 Ultimate kernel in my Stock ROM
Then i copied system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
And made a "back up" of my current ROM and "switched" to "G3MODv2_ROM"
This is how it looks now:
Help,!!
Anyone?
Jai-tulip said:
Try to edit uer signature..
Click to expand...
Click to collapse
You can't build a signature with under 10 posts or so.
What's wrong with the sreenshots you show?
Mine doesn't look like how its supposed to ,
It looks just like the stock ROM except the icons look smaller than before
I wanted mine to look just like this -
Have a look at the first post of the development thread.
[ROM] G3MOD v2.0 - Released
It says "Stock Theme" under ROM Features.
Aced443 said:
Guys its not working for me!!
I flashed G3MOD 1.7 Ultimate kernel in my Stock ROM
Then i copied system.img in /sdcard/Android/data/g3mod/G3MODv2_ROM
And made a "back up" of my current ROM and "switched" to "G3MODv2_ROM"
This is how it looks now:
Click to expand...
Click to collapse
Hey.. If you have already flashed it like it was mentioned earlier in the thread.. You should be running G3Mod v2.0 .. And the theme.. Not to worry.. That is the theme of v2.0 ..
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Edit : It's working
Zelantine said:
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Click to expand...
Click to collapse
for convenience , use g3mod app.. or see how kyrillos stated to apply his app2sd..
bizjoya said:
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
Click to expand...
Click to collapse
Well, when we're talking about "Multi boot" we dont exactly mean the kind of Multi-boot on your PC, like Linux and Windows, where you have to make different partitions for both the OS
Here, we are just switching one ROM to another from CWM Recovery. So basically what that mean is, you are using one ROM at a time
Hope that's clear
bizjoya said:
Using kyrillos 7.0 now. what if i dont want to use multibbot, that means only one ROM at a time. how to do it then?
will I have to repartition my sd. using 512 and 128 mb as swap with kyrillos.. plzz reply.
Click to expand...
Click to collapse
If you dont want to use multiboot, then you dont have to. You can use 1.7v as any other Kernel with One ROM as well. Multiboot is an additional functionality added by DharamG so that we can, if we want have another ROM, without having to flash it using ODIN all the time. It is of great value for testers and those of us who like to try out new ROMs. You can as well use 1.7 on Kyrillos 7..it will work great.
help
Zelantine said:
How i can install app2sd v2 on G3mod?
I've already partitionned my sd card with CWM, but I don't see app2sd space in Titanium Backup and I'm already out of memory...
Do i must use G3Mod app?
Thanks for reply! (if you reply )
Edit : It's working
Click to expand...
Click to collapse
How did you solve the problem? i`m in the same situation. (i`m not out of space but i want to use app2sd)
Fixed: I took the app2sd-v2 script from here and stick it to /system/etc/init.d/ then factory reset.
Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!
Nicuu said:
Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!
Click to expand...
Click to collapse
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.
Nigeldg said:
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.
Click to expand...
Click to collapse
Alright, thanks!
But I should unmount the SD-card by doing it the safe way, delete partitions, make FAT32, mount in - turn off phone and then flash the rom?
This is the rom i downloaded from htc
RUU_Leo_S_HTC_NOR_3.14.409.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
At least this is what it's named. Thanks for any help!!
@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse
poyensa said:
@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
Click to expand...
Click to collapse
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)
Nicuu said:
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)
Click to expand...
Click to collapse
Go to your post 1 at top of this page, click edit then click advanced and change the title.
Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable
alanman said:
Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable
Click to expand...
Click to collapse
Oh yeah? Do you have the t-mobile version of htc HD2?
And by NAND, you mean other roms probably.
Could perhaps give it a try, but I think my phone has a motherboard problem, as it overheats very fast.
Haven't you had any problems with MIUI? which miui do u use?
Does anyone know how to resolve? It says NST does not have enough space but I have 95MB left. I am not sure what happens.
Be sure you have used the latest version of NookManager that includes the PackageInstaller.apk. Or you can use adb to install packages (or use adb to install PackageInstaller.apk and then everything else should install normally.
npoon said:
Does anyone know how to resolve? It says NST does not have enough space but I have 95MB left. I am not sure what happens.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=35906655&postcount=94
Next time read the whole thread before starting a new one.
osowiecki said:
http://forum.xda-developers.com/showpost.php?p=35906655&postcount=94
Next time read the whole thread before starting a new one.
Click to expand...
Click to collapse
Dude I did use 0.4.1 and got the issue.
npoon said:
Dude I did use 0.4.1 and got the issue.
Click to expand...
Click to collapse
Ok..
Try to do this, root again and report back whether or not it helped.
http://forum.xda-developers.com/showpost.php?p=35860222&postcount=88
If it does not help ask "jeff_kz" or "dq11" for help.
I don't have my "nook" anywhere near me so I can't perform any testing.
Hi,
I searched "lineage rpi3" on google and found this:
http://konstakang.com/devices/rpi3/CM14.1/
Any experiences?
Working better than RTAndroid
But unable to get Headunit Reloaded working
Trying to install Gapps from Windows.
oreggin said:
Hi,
I searched "lineage rpi3" on google and found this:
http://konstakang.com/devices/rpi3/CM14.1/
Any experiences?
Click to expand...
Click to collapse
By far, the best Android N build for Pi.
will netflix work on this build?
Samueldanny said:
will netflix work on this build?
Click to expand...
Click to collapse
If you play low resolution videos, it will play clean. But if you try to play high res videos, it will become distorted.
shivasiddharth said:
If you play low resolution videos, it will play clean. But if you try to play high res videos, it will become distorted.
Click to expand...
Click to collapse
So that's a no? lol
has anyone fixed the cursor bug>
How install ?
How to install gapps?
there is a magisk module which enables gapps drm
hp420 said:
there is a magisk module which enables gapps drm
Click to expand...
Click to collapse
Did you try it? Is it working? Please provide download link
psbankar said:
Did you try it? Is it working? Please provide download link
Click to expand...
Click to collapse
I haven't tried it, but it is available in the official magisk manager module downloader.
https://github.com/Magisk-Modules-Repo/google-framework-magisk
Or you try to install Google Apps with the app from OpenApps. http://opengapps.org/app/
Open Gapps app seems to not working for me.
This Android build may not contained Recovery boot image
How to acces power menu ?
am i on the right track?? having trouble getting lineage 14.1 running
hello im new on here and have been using my raspberry pi 3 for mostly a retropie img .......using a class 10 Samsung 128gb for that and didn't want to format to try to see how the android works out...the card I loaded the LineageOS img may not be such dependable 64 gb card.... so did the normal format and win32 write .......the screen loads to the blue line with the circle going by but does not get passed that ...wish ive gotten farther but could this mean the card is not good enough?? or does it sound like another issue?? hope this the place to ask as im new here ....thanx
Just flashed it to an SD card via Etcher and it's stuck in boot loop. Any ideas?
Vortelf said:
Just flashed it to an SD card via Etcher and it's stuck in boot loop. Any ideas?
Click to expand...
Click to collapse
Same here ..... Won't get passed opening boot
Give up, android on Pi sucks.
Nypan sr said:
Give up, android on Pi sucks.
Click to expand...
Click to collapse
You are right, booted it up and it is painfully slow and can't open more than 1 app, which either way crashes.