Note: This project has been abandoned. Use at own risk.
See http://forum.xda-developers.com/showthread.php?p=18699097#post18699097
pb3 Captivate Gingerbread GPS Tweaks
This is a package of tweaks and modifications to GPS configuration on Samsung Captivate under Gingerbread. Tested so far under KH3 (Pinnacle, Captivate I897 2.3.4) but is derived from XXJVS 2.3.5 GRK39C 2.3.6 Nexus S i9020A and should work on any deodexed, I-897/I-9000 Gingerbread ROM/modem.
Users of Odexed ROMs should delete /system/app/AngryGPS.apk from the .zip before flashing, and if desired substitute an odexed XXJVS AngryGPS.apk.
WILL NOT WORK WITH FROYO ROMs.
WILL (Probably) NOT WORK WITH CM7 OR MIUI
Localizing for your Country/Region
This BETA version is localized only for North America. As the North American pool is about 90% US-based servers anyway, this setting is likely adequate for most users throughout North America. If desired, NTP server localization (i.e. us.pool.ntp.org, ca.pool.ntp.org, europe.pool.ntp.org etc.) can be changed by editing line 1 of /etc/gps.conf to the desired NTP server. See http://www.pool.ntp.org/zone/@ for server details for your region.
Installation Instructions:
IMPORTANT: In order for this to work properly you must adjust your SUPL settings after flashing!
Download the file and flash in CWM3 recovery.
Apply the SUPL configuration settings in AngryGPS as described below.
Make sure GPS is turned on.
Open dialer and dial *#3214789650# or *#*#3214789650#*#* to start AngryGPS
Settings -> General Settings:
Test Mode: S/W Test
Operation Mode = MSBASED
Start Mode: Hot start
Settings -> SUPL Settings
Server FQDN Type: Custom Config
Server: supl.google.com
Server Port: 7276
Server Type: UMTS SLP
SUPL Secure Socket: ON
AGPS Mode: SUPL
SSL Type: Google Server
Download: https://code.google.com/p/captivate-gb-gps-tweaks/downloads/list
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problems/Issues should be reported at https://code.google.com/p/captivate-gb-gps-tweaks/
Changelog:
Beta 2: (Initial Public Beta Release)
gpsd daemon from GRK39C 2.3.6 Nexus S i9020A
gps driver from GRK39C
minor changes and additions to gps.xml from GRK39C
Beta 1:
Latest GPS-related binaries from XXJVS (I9000 Gingerbread 2.3.5)
Tweaked configuration files gps.xml and gpsExtLNA.xml
SSL Secure SUPL enabled for privacy/security - no more broadcasting your location in the clear over the Internet every time you use your GPS
Local LBS enabled - keeps a local registry of wireless networks of known location to speed re-acquiring initial fix in those areas
Tweaks to gps.xml and gps_ExtLNA.xml:
extraneous debugging code removed
position smoothing re-enabled
local LBS re-ennabled
LBS sync days set to 1
Dynamic mode set to pedestrian for most frequent position updates
SUPL re-aiding time reduced to 5 min.
Files Included:
gps daemon and script from XXJVS Samsung I9000 Gingerbread 2.3.4
AT&T SSL certificate from KB1
Uuencoded SSL certificates from KB1
AngryGPS.apk from JVS
GPS driver from JVS
Great work bro... keep it up
good to have you back .. how about them NexusS files ?
fyi JVS = GB 2.3.5
DAGr8 said:
good to have you back .. how about them NexusS files ?
fyi JVS = GB 2.3.5
Click to expand...
Click to collapse
Beta 2 is derived from GRK39C 2.3.6 Nexus S i9020A
@Rrryan2
Heck of a great start. I'm only seeing two satellites though now.
... But hey one is always showing a signal strength of over 230 using the gps test app! I posted the issue on your link.
I'm on Pinnacle 1.2
As always, thanks for the efforts.
Beta 2 on apex 10 makes gps actually work.
Peaster111 said:
@Rrryan2
Heck of a great start. I'm only seeing two satellites though now.
... But hey one is always showing a signal strength of over 230 using the gps status app! I posted the issue on your link.
I'm on Pinnacle 1.2
As always, thanks for the efforts.
Click to expand...
Click to collapse
Pinnacle problem - if you upgraded from Pinnacle 1.1x using the 1.2 no-wipe upgrade, the GPS issues that were in 1.1 are still present. Upgrade using the 1.2 full wipe and that issue goes away.
Okay will do... Thanks
Good results on Pinnacle 1.2 with KF1. Getting a little better results than with h3llstorm's fix, I'd usually get 7/7 sat lock with 30m accuracy in 15 seconds cold, but now I get 8/8 with 10m accuracy. Good stuff, thanks. And this is coming from a captivate which had terrible gps on froyo except for JVO modem, and practically non-working gingerbread gps without any fixes.
would love to try this. is it possible to install on non-cwm, stock kh3? tried with the update via zip in recovery but it complained about invalid signature...
poolemit said:
would love to try this. is it possible to install on non-cwm, stock kh3? tried with the update via zip in recovery but it complained about invalid signature...
Click to expand...
Click to collapse
Why can't you just flash boog's kernel?
Rrryan2 said:
[*]Download the file and flash in CWM3 recovery.
[*]Apply the SUPL configuration settings in AngryGPS as described below.
Make sure GPS is turned on.
Open dialer and dial *#3214789650* to start AngryGPS
Settings -> General Settings:
Click to expand...
Click to collapse
*#3214789650# for me...
soblecram said:
*#3214789650# for me...
Click to expand...
Click to collapse
Fails here
Sent from my SAMSUNG-SGH-I897 using XDA App
soblecram said:
*#3214789650# for me...
Click to expand...
Click to collapse
Same for me.
soblecram said:
*#3214789650# for me...
Click to expand...
Click to collapse
+1
+10char
xhozt said:
Fails here
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Does the *#3214789650* work for you? or does the # bring you location and security menu (means you need to enable GPS first before dialing code)
Whoops. Typo.
Edited op.
Sent from my SAMSUNG-SGH-I897 using XDA App
Try *#*#3214789650#*#*
Sent from my SAMSUNG-SGH-I897 using XDA App
laihafloyd said:
Try *#*#3214789650#*#*
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This is what I've always used.
laihafloyd said:
Try *#*#3214789650#*#*
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
only this worked for me. however, now i'm getting a force close for angrygps.apk. does this work for stock, non-deodexed roms? perhaps i need a different angrygps.apk for the stock KH3.
Related
Based on Doc's XXJPU + TLJL3 Modem (12/14/2010)
This is a Captivate port from Doc Froyo V4 Final. Base ROM is XXJPU (Android Froyo 2.2.1) and modem is TLJL3.
UMTS and GSM 850Mhz is enabled by default, flashing modem seperately is not required.
This ROM has been modified from the original full ROM, it only contains stock apps similar to my other ROM releases.
Basic Features:
- Based on XXJPU (Froyo 2.2.1) + TLJL3 Modem
- Deodexed
- Apps and framework optimized
- Rooted
- Busybox
- Zip-aligned
- xcaliburinhand Reoriented Kernel w/ Voodoo + BLN
- Unthemed (theme templates available)
- Big APN list
- Wipe installs, factory reset BEFORE 1st install recommended
- Ads Blocked HOSTS file
Added apps:
Zeam
Latest SU and busybox
Dlna
Gmail
Install flash player
Live wallpapers Chooser
Maps
Mobile tracker
Samsungapps
Screen capture
SNS accounts (facebook sync)
Swype
Unified inbox (facebook, twitter etc)
Wipereciver
Voice dialer
Voice recorder
Voice search
Download:
Base ROM http://www.mirrorcreator.com/files/MHRDNJT2/KILLER23D_XXJPU_Doc_V4.0_wipe.zip_links
Theme Template http://www.multiupload.com/FVJV09FODM
Change log:
V3.0.1 - disabled increasing phone signal, new market, new highres gallery (maybe a bit slower), optimized ZEAM added, new browser. Better market fix, updated voicedialer, tweaked system for speed. Moved Gmail, Map, Talk, Voicesearch, Flash Player on data/app)
V4 Final - resynced all apk's for speed, SD mount bug fix, retained i9000 camera for new feature, new high-res gallary. Moved all apps back to system/app
Installation:
1) One-Click Restore to JF6 + Master Clear
2) Copy clockwork_recovery.zip to internal SD and rename to update.zip
3) Copy the ROM file and/or add-on to internal SD
4) Reboot to Recovery
5) Apply update.zip in Recovery to load Clockworkmod Recovery
6) Install the ROM file from internal SD via Clockworks
7) Wait for the install and reboot the system, Voodoo voice will let you know it is working
8) Install Add-On via CWM Recovery if needed (Must let the phone boots at least once)
Credit goes to DocRambone, kalpik, xcaliburinhand, Tayutama, Mikeymike and everyone else for their hard work to make this possible.
Old Downloads:
Base ROM V2 http://www.mirrorcreator.com/files/7CDNMSG0/Killer23d_XXJPU_Doc_V2_Wipe.zip_links
Base ROM V3.0.1 http://www.mirrorcreator.com/files/CTDOKWNV/KILLER23D_XXJPU_Doc_V3.0.1_Wipe.zip_links BUG FOUND!! RISKY
- Setiron's Kernel is NOT quite compatible with the ROM, I don't recommend it. However, you can still use Odin to flash it in after the phone is rebooted at least once.
- DO NOT reset to factory if you have Setiron's kernel because the phone will get stuck at Galaxy S screen.
- Tested working great on voice, data, bluetooth. GPS got a lock within 15 sec with 30 meter accuracy.
- No CWM in kernel, this will not change unless Setiron/xcaliburinhand decides to have them in.
- If you need to get out of this ROM, I suggest please use Odin One-Click Restore to JF6 and start-over. CWM Recovery does not work unless Voodoo/Lagfix is disabled.
- This ROM is giving me too many grieves.... I am suggesting going back to BUJP8 if you want a stable release.
- V4 has been stable so far for 6 hours, it is not a nightmere as it was before.
Download link ???
is live wallpaper included? i flashed doc 2.2.1; live wallpaper is missing! flashed jpu addon; live wallpaper wont work!
netnerd said:
is live wallpaper included? i flashed doc 2.2.1; live wallpaper is missing! flashed jpu addon; live wallpaper wont work!
Click to expand...
Click to collapse
All livewallpapers are removed, only the chooser is intact, meaning you can install your own.
Can I ask why you added wipereceiver.apk?
MikeyMike01 said:
Can I ask why you added wipereceiver.apk?
Click to expand...
Click to collapse
Doc has them there and things that comes with all the SGS I tend to keep them there just in case. I think that app is for remote wiping (don't know how it works tho).
This new ROM here is very picky, unlike previous ROMs.. I have spent 2 nights of trial and error to get them to work.
flashed this rom and I have to say the gps is working flawlessly on my phone. Good stuff
Looks good, are GPS fixes incorporated (JM9, Epic files, etc..)?
OP kinda confused me. Is the Rom based on jk4 or just the modem? I know it says ported from Doc's jpu Rom but right underneath it says based on jk4. Also, does the home haptic feedback work?
Sent from my GT-I9000M using XDA App
majinzen said:
OP kinda confused me. Is the Rom based on jk4 or just the modem? I know it says ported from Doc's jpu Rom but right underneath it says based on jk4. Also, does the home haptic feedback work?
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Same here. Is it Jk4 or JPU, and is it 2.2 or 2.2.1? Also, if it is 2.2.1, is wifi, hd recording, and all the other bugs worked out?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
got gps lock inside my house in seconds
wifi works
bluetooth works
very nice no frills rom
the title says it's the jpu rom with the jk4 modem.
hackdroid said:
got gps lock inside my house in seconds
wifi works
bluetooth works
very nice no frills rom
Click to expand...
Click to collapse
This screen shot is exactly what I was looking for. Thanks.
I'm shocked this is only 2 pages long at this point. 2.2.1 + Jk4 is a very sought after combo these days. I will be watching this one closely.
Those of you that have flashed this keep us posted:
Stability, GPS, battery life, etc.
To Apply Setirons JPU kernels should I disable lag fix and use ODIN or not needed?
shaolin95 said:
To Apply Setirons JPU kernels should I disable lag fix and use ODIN or not needed?
Click to expand...
Click to collapse
Yes, disabling lagfix is recommended.
killer23d said:
Setiron's Kernel is NOT quiet compatible with the ROM, I don't recommend it. However, you can still use Odin to flash it in after the phone is rebooted at least once.
Click to expand...
Click to collapse
What issues have you found with the setiron kernel? Im running doc's 2.1 raw rom with setiron's jpu kernel and haven't run into any hiccup's yet.
peachpuff said:
What issues have you found with the setiron kernel? Im running doc's 2.1 raw rom with setiron's jpu kernel and haven't run into any hiccup's yet.
Click to expand...
Click to collapse
I'm thinking it's related to overclocking as the chef chose to go with xcaliburinhands kernel which doesn't support overclocking.
Just a thought.
alex4lex said:
Same here. Is it Jk4 or JPU, and is it 2.2 or 2.2.1? Also, if it is 2.2.1, is wifi, hd recording, and all the other bugs worked out?
Click to expand...
Click to collapse
slifer315 said:
the title says it's the jpu rom with the jk4 modem.
Click to expand...
Click to collapse
killer23d said:
Based on Doc's XXJPU + UGJK4 Modem (12/11/2010)
This is a Captivate port from Doc Froyo 2.2.1.
UMTS and GSM 850Mhz is enabled by default, flashing modem seperately is not required.
This ROM has been modified from the original full ROM, it only contains stock apps similar to my other ROM releases.
Basic Features:
- Based on UGJK4 (Froyo 2.2)
- Deodexed
Click to expand...
Click to collapse
I think that was the confusion.....Jk4
Currently is not an official build, but an unofficial one by galnet... I cant post any direct links to galnet as xda dont give the permission too...
So here it is, 2.1.11(MIUI V4)
MIUI Home
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI Feedback
LBE Security
Dialer
Messaging
Camera
Camcorder (720p HD Recording working, use this fix by me)
About Phone Part 1
About Phone Part 2
People Part 1
People Part 2
Settings
Gallery
Music
Voodoo Color working (USE DEVILMOD KERNEL)
Multitasking
Review photo sources : http://min.us/mS4fP4swB
Couple of minutes of discovery,
Updated Discovery for 19.12.2011 version...
Newly updated Discovery for 13.1.2012
-Based on 4.0.3 IML74K
-Based on Pawitp's stock 3.0.8 ICS kernel (Now you can use other kernels like DevilM0D)
-Data 3G/H is not working (tried on JVS and JVT modem)
-Lags abit
-Camera Not Working
-Alot of bloatwares
-Boot Animation is not loaded
-Wonderful UI made...
-FC once in a while for some apps...
-You cant change your 3G Preferred connection
All is working except:
-Calendar sync
Great! Thanks for sharing this!
It looks beautiful but it's very much incomplete and lags like hell.
Wow. Thanks for the heads up. But why is NFC added in the features??
ssvijay said:
Wow. Thanks for the heads up. But why is NFC added in the features??
Click to expand...
Click to collapse
It was ported from Nexus S...
Sent from my GT-I9000 using Tapatalk
Its awesome, want official rom
DaxIΠFIΠITY said:
It was ported from Nexus S...
Click to expand...
Click to collapse
You can't port it to SGS, it doesn't have NFC chip.
Wow ! Looking forward for the final version !
Hum, great
I'm waiting for version based on ICS build 10 ou onecosmic kernel with data wifi/3g, hardware compo, etc...
MIUI i1900 v4.0 1.12.19
New update for i1900
Change log for MIUI v4.0 1.12.19
Fully working Camera and Video Recording (May be choppy on some devices)
Boot Animation Fixed
Market Install Issues Fixed
Optimisation Of Applications on Install
Video Playback Resolved
Google Applications Added
Startup Wizard Included
Internal and External SD Cards Working
USB Working
Face Unlock Working
MIUI Themes Working
Auto Brightness Working Correctly
Sensors Working Correctly
Battery Lasting Around 18+ Hours
Music/Audio Working Correctly
Sound Settings FC Repaired
Rooted and Super User Included
Ram Tweaks and Management
Corrected ISO Settings within Camera
Panoramic Photo Setting In Camera Working
WIFI and Mobile Data Working (Toggle WIFI on and off may be required and Data may not work on some networks)
Minor Fixes to Stabilise Rom
And Loads More Now Resolved Under The Hood (Clean up etc..)
Download from galnetmiui.co.uk
Themes don't work tested it, gave in to curiosity, laggy
Back on mintberry waiting for official v4
sent from my MIUI powered C64
Just finish downloading and thinking to flash it already. Lucky I click my tapatalk first and me realise that shouldn't flash it yet. Thanks for these information
Sent from my GT-I9000 using Tapatalk
I have updated op, and now left with one bug...
Sent from my Galaxy S i9000 with ICS Build 10 + 1.5ghz OC!!!
DaxIΠFIΠITY said:
-Alot of bloatwares
Click to expand...
Click to collapse
Are there useless app installed on an untouched MIUI ROM? I'd imagin it's clean except for Google apps etc.
emelie said:
Are there useless app installed on an untouched MIUI ROM? I'd imagin it's clean except for Google apps etc.
Click to expand...
Click to collapse
Oh wait, i forgot to strike that...
Sent from my Galaxy S i9000 with ICS Build 10 + 1.5ghz OC!!!
Does it really lag like hell??
aaron_my said:
Does it really lag like hell??
Click to expand...
Click to collapse
Not really but data doesnt works on me...
Sent from my Galaxy S i9000 with ICS Build 10 + 1.5ghz OC!!!
hi thr...im new in MIUI. i flashed. everything works ok. data i didnt check cus i dont use data. wifi works ok. my stupid question is how i can find my external sd card? :O i check File explorer, thr shows only internal sd...
sajibcy said:
hi thr...im new in MIUI. i flashed. everything works ok. data i didnt check cus i dont use data. wifi works ok. my stupid question is how i can find my external sd card? :O i check File explorer, thr shows only internal sd...
Click to expand...
Click to collapse
Get Root Explorer and check for emmc...
Sent from my Galaxy S i9000 with ICS Build 10 + 1.5ghz OC!!!
The rom is OK but I still prefer MYics by barome. Hope the new build after Xmas is good
Sent from my GT-I9000 using Tapatalk
aaron_my said:
The from is OK but I still prefer MYics by barome. Hope the new build after Xmas is good
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I would prefer using CM9 B10 + Glitch v14-DEV...
Sent from my Galaxy S i9000 with ICS Build 10 + 1.5ghz OC!!!
A few words
Most (if not all) GPS patches for Galaxy ACE I came across here on XDA were created to provide faster GPS Lock. Others tried to replace CM7.x hw libraries (sensors) with ones from stock roms. That example is lagloose's patch which actually works really nice and a great idea indeed to have stock sensor libraries in a CM7.x rom. As a perfectionist, I wanted to take that idea and push it further. You see, the thing is not only having a fast GPS lock but have better reception and accuracy, i.e strong signal even when weather conditions are bad, or a gps lock indoors and close to a window. I did lot's of searching, mostly on Samsung Galaxy S2 threads here and elsewhere. Some configurations worked, others didn't and one worked really nice for our beloved ACE. I present to you, probably the best GPS patch for ACE (so far)!
What is F&A GPS+Sensors patch?
F&A refers to "Fast" and "Accurate". So not only you'll get a very fast lock but also better reception and accuracy. The GPS part can be used on both CM7.x and STOCK ROMS. The sensors part targets only CM7.x roms and replaces all hw libraries (sensors) in system\lib\hw with the ones from Samsung XXKPT Stock Rom. Most credits for all this should probably go to lagloose as he is the one that actually posted a patch like this in the first place. I just took the opportunity to take that patch to another level, if you allow me to say so, by changing completely the gps.conf file. The zip attached below is actually lagloose's zip which has been modified by me. Kept his signature and all. I am just the modder
How the patch works?
-- it installs 'gpsd' in system\bin (just like stock roms)
-- it installs a modded gps.conf in system\etc, different than the one lagloose provided, that needs to be edited by you
-- it wipes your data\gps directory to remove old xtra.bin files
-- it completely replaces the libs in system\lib\hw with libs from Samsung XXKPT Stock Rom. Sources updated by me.
Notice
Always backup your system before flashing anything, including this patch. Let me know how it work out for you! This patch was tested both with GPSTest Plus + Ndrive, Mireo Navigators and worked perfect!
Installation procedure for CM7.x users
-- Place the attached zip file on your sd-card
-- Reboot into CWM5, mount system then flash it
-- Reboot phone
-- Finalize procedure as described in 2nd post
-- Done!
Installation procedure for STOCK ROM users
-- You must be rooted
-- Place gps.conf file on your sd-card
-- Open root explorer, copy that file and paste it to system\etc. It will overwrite old file and create a backup for that.
-- Do procedure as described in 2nd post
-- Set permissions to new file to rw-r--r-- and reboot
-- Once all above completed use GPS Test to clear AGPS and update AGPS
-- Done!
Installation procedure for MIRACLE V3 users
Either of two procedures above should work the same. Choose what is easier for you. The only thing changed from patch already included in MIRACLE V3 is the gps.conf file in system\etc
Credits
lagloose for firstly having this wonderul idea
GeoX at Samsung Galaxy S2 forums at myphone.gr
Screenshots using GPSTest Plus and NDrive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finalising gps.conf file
1. Change COUNTRY and REGION with yours according to this link
2. If the above link provides less servers for you, only country servers or region servers, modify the file respectively and delete extra lines
3. If you know other ntp servers besides the above link for your country, you can add them before the ones that are seen on the following picture. The more servers you provide, the better as some of them sometimes might be off. I have included my personal gps.conf file as an example.
Here's my gps.conf file. Locking and accuracy is beyond expectations
Code:
NTP_SERVER=chronos.asda.gr
NTP_SERVER=ntp.databank.com.gr
NTP_SERVER=ntp.asda.gr
NTP_SERVER=ntp.ntua.gr
NTP_SERVER=clock.auth.gr
NTP_SERVER=ntp.hol.gr
NTP_SERVER=gr.pool.ntp.org
NTP_SERVER=0.gr.pool.ntp.org
NTP_SERVER=1.gr.pool.ntp.org
NTP_SERVER=2.gr.pool.ntp.org
NTP_SERVER=3.gr.pool.ntp.org
NTP_SERVER=europe.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=/data/xtra.bin
AGPS=/data/xtra.bin
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
QOS_ACCURACY=50
QOS_TIME_OUT_STANDALONE=60
QOS_TIME_OUT_agps=89
QosHorizontalThreshold=1000
QosVerticalThreshold=500
AssistMethodType=1
AgpsUse=1
AgpsMtConf=0
AgpsMtResponseType=1
AgpsServerType=1
AgpsServerIp=3232235555
DEBUG_LEVEL=0
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=lbs.geo.t-mobile.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common
Sounds good! Can't wait to try it, as I'm an avid geocacher!
Sent from Samsung Galaxy Ace
One thing.
Don't open thread without links. I dodn't know you well yet, but OP seems to be experienced user. In most cases no link=no development. So please post it after uploading.
I won't close this thread, but next time I will.
eagleeyetom said:
One thing.
Don't open thread without links. I dodn't know you well yet, but OP seems to be experienced user. In most cases no link=no development. So please post it after uploading.
I won't close this thread, but next time I will.
Click to expand...
Click to collapse
Sorry mod, my bad..will upload links tonight. Thanks for not deleting!
Good news. Because navigation is the most important feature for me. And it doesn't lock GPS about 5 minutes (Outdoors) and really gets me angry sometimes.
Thank you. I am waiting...
Hi, is this included in miraclev3?
Sent from my GT-S5830 using xda premium
You told us about GPS module, but how about other sensors?
Did you change something?
1st and 2nd floor updated. Links are up!
For sur will give a try! Hey Itasoulas, you never sleep!
Goodk work, I appreciate.
Sent from my GT-S5830 using xda premium
Thank you
your first patch modified with lib XXKPT already works very well.
Hey man,
thnx for this one. Is working very well on my stock 2.3.3.
Also have a question if i may; Is this also useable on other phones, like GS+ ?
(sorry if dump question)
Cheers.
Sgace said:
Hey man,
thnx for this one. Is working very well on my stock 2.3.3.
Also have a question if i may; Is this also useable on other phones, like GS+ ?
(sorry if dump question)
Cheers.
Click to expand...
Click to collapse
glad to know it's working well on stock Tell me something, go to system\etc. Is there a sirfgps.conf there? GS+ i mean
downloading!
itasoulas apology, in my case I live in Uruguay.
Uruguay is not on that page.
I would have to wear?
mauro25987 said:
itasoulas apology, in my case I live in Uruguay.
Uruguay is not on that page.
I would have to wear?
Click to expand...
Click to collapse
NTP_SERVER=south-america.pool.ntp.org
NTP_SERVER=0.south-america.pool.ntp.org
NTP_SERVER=1.south-america.pool.ntp.org
NTP_SERVER=2.south-america.pool.ntp.org
NTP_SERVER=3.south-america.pool.ntp.org
itasoulas said:
NTP_SERVER=south-america.pool.ntp.org
NTP_SERVER=0.south-america.pool.ntp.org
NTP_SERVER=1.south-america.pool.ntp.org
NTP_SERVER=2.south-america.pool.ntp.org
NTP_SERVER=3.south-america.pool.ntp.org
Click to expand...
Click to collapse
Thanks itasoulas
Enviado desde mi GT-S5830 usando Tapatalk 2
Is this already included in miraclev3?
Sent from my GT-S5830 using xda premium
yes
mjaquiler said:
Is this already included in miraclev3?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I modified GPS.conf as in 2nd post, but it doesn't work! Maybe i did something wrong, here is my GPS.conf.
NTP_SERVER=it.pool.ntp.org
NTP_SERVER=0.it.pool.ntp.org
NTP_SERVER=1.it.pool.ntp.org
NTP_SERVER=2.it.pool.ntp.org
NTP_SERVER=3.it.pool.ntp.org
NTP_SERVER=europe.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=/data/xtra.bin
AGPS=/data/xtra.bin
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
QOS_ACCURACY=50
QOS_TIME_OUT_STANDALONE=60
QOS_TIME_OUT_agps=89
QosHorizontalThreshold=1000
QosVerticalThreshold=500
AssistMethodType=1
AgpsUse=1
AgpsMtConf=0
AgpsMtResponseType=1
AgpsServerType=1
AgpsServerIp=3232235555
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=lbs.geo.t-mobile.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common
Sent from my Galaxy Ace on Cm 7.2
This ROM is built from Google Android sources, with added functionalities from CM9 and AOKP to make it more comfortable and user-friendly, improving the user experience.
Main Features:
Built from Android sources (IMM76D)
Notification bar toggles and numeric battery indicator
Brightness control in status and notifications bars
Extended power menu with reboot, recovery and screenshot.
TV-Out
Application killing with long press on back button
T9 Dialer
Removed "R" roaming indicator for national roaming
Root, Busybox and SuperSU
Kernel Semaphore 1.2.1sc
Preinstalled apps: OI File Manager, Titanium Backup, Zeam Launcher
APN's predefined huge list
Modified hosts file to remove ads in applications.
Hellstorms GPS Fix
What Works:
Everything!
Known bugs
NO BUGS REPORTED
Changelog
v4.0
Added timer option to Camera app (thanks to CM9)
Improved stability when connecting to Bluetooth headsets
Updated SuperSU
Removed Barcode Scanner
Added an option to show/hide the brightness control slider of the notifications bar (Go to Settings -> Display -> Brightness control slider).
Added an option to change between stock battery icon and numeric battery icon (Go to Settings -> Battery -> Press Menu Button -> Change battery style).
Tried to prevent an infrequent soft reboot when loading the lock screen.
v3.0
Fixed silent toggle
Added a padding between toggles and brightness control in order to prevent accidental touch on AUTO button.
Fixed a bug in brightness control slider which made it always self-increase if AUTO button is unchecked.
Added Power Shutter feature in Camera app (NOTE: It is necessary to restart the Camera app after enabling this option). Big thanks to Danesh for this feature.
Fixed Google Backup
Added Storage selection in Camera app (thanks, CM team).
v2.2
Improved auto-brightness feature: the display brightness goes down when the light decreases.
v2.0:
Update to IMM76I build
Killing Launcher By Long Press Of Back Key Is Now Prevented
v1.2:
Added Zeam Launcher
Added Titanium Backup
Removed GApps(GApps will be linked below under downloads)
Added Hellstorms GPS Fix
May Have Forgotten a couple things
v1.0:
First Release
Please Test Functions
Clean Installation (if you come from other ROM)
You need CWM recovery to install the ROM. If you are in a stock Gingerbread ROM, flash a kernel with CWM.
Boot in CWM Recovery
Wipe data/factory reset
Wipe Cache
Select "Install zip from sdcard" and choose the ROM zip file you have downloaded
Reboot
CREDITS:All credits go to THIS POST He allowed me to port this rom. All other credits are in that thread.
Downloads:
v4.0:
ZIPPYSHARE
MEDIAFIRE
MINUS
GAPPS
_______________________________________
v3.0:
MINUS
MEDIAFIRE
GAPPS
________________________________________
v2.2
MINUS
MEDIAFIRE
GAPPS
________________________________________
v2.0
MINUS
MEDIAFIRE
GAPPS
________________________________________
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: I AM NOT A Dev I used A Guide To Port This Over To The Captivate! If problems arise please post and I will try to figure out whats going on. THIS IS NOT A GUARANTEE THAT I CAN FIX IT. I Am In Need of a dev to teach me a couple things as well. IF SOMEONE COULD HELP ME WITH THIS ROM THAT WOULD BE APPRECIATED!
If you are getting market error 921 Please read this:
kobridge said:
This thread is to provide the solution for Google play store download error - 921.
Today I got the error while downloading the apps from Google Play Store. The error message is
'Error - Update for "xxxxx" could not be downloaded due to an error. (921)'
I've searched the forum and found some useful information. Because the thread was belonging to different phone, I wanted to post the information with some more details.
If you see the same error, then follow the steps -
1. Menu > Settings > Personal > Accounts and sync > click on your google account (email)
2. click 'Remove account'. Don't worry, it's not deleting your physical account. Account related information is still saved in Google.
3. Launch Google Play Store again
4. When asked, use existing account to create the google account.
5. Provide your existing google account information (email & password)
6. try again to download
Based on my experience, whenever I got the 921 error, cleaning cache and data for google play store app does not work.
Another work around is creating a second google account. But I believe many people do not want to maintain multiple account on one phone.
Click to expand...
Click to collapse
first
Edit: Man, You are on fire! If I am not wrong this is your second port of the day... right? I just flashed the one that you ported earlier... not complaining tho... I am soooooo happy!!!!!
agasagas said:
first
Click to expand...
Click to collapse
Lol so its a race To be exact I was the first to post
ooooh more drugs for the addiction
CheesyNutz said:
ooooh more drugs for the addiction
Click to expand...
Click to collapse
Tell me what you think, If you run into any problems then please tell me. this is a simple port and Im still working the kinks and bugs out.
LINKS ARE LIVE
patrick8996 said:
Lol so its a race To be exact I was the first to post
Click to expand...
Click to collapse
LoL! Anyway... Let me know if you need that spot man for any reasons. Again THANK YOU
agasagas said:
LoL! Anyway... Let me know if you need that spot man for any reasons. Again THANK YOU
Click to expand...
Click to collapse
Your welcome lol And what do you mean spot man? Im a bit confused xD
agasagas said:
first
Edit: Man, You are on fire! If I am not wrong this is your second port of the day... right? I just flashed the one that you ported earlier... not complaining tho... I am soooooo happy!!!!!
Click to expand...
Click to collapse
And yep it is my second port lol
patrick8996 said:
Your welcome lol And what do you mean spot man? Im a bit confused xD
Click to expand...
Click to collapse
Sorry... What I meant is the post #2, you might have some important thing to post. Downloading now this ROM.
agasagas said:
Sorry... What I meant is the post #2, you might have some important thing to post. Downloading now this ROM.
Click to expand...
Click to collapse
Thanks Screenshots are now up as well
If you find any problems feel free to report them
Already ran into a couple problems going to look into it soon
Sent from my SGH-I897 using Tapatalk 2
Did you make sure to ask the devs first? This looks nice, but how does it differ from AOKP besides the fact that its built on ICS Source?
pwneman said:
Did you make sure to ask the devs first? This looks nice, but how does it differ from AOKP besides the fact that its built on ICS Source?
Click to expand...
Click to collapse
Yes I asked the devs and all I did was port it lol look at the post in the credits part
Sent from my SGH-I897 using Tapatalk 2
Having some problems updating, when I get it to work I will release
Updated to v1.2 check the OP for details
Downloading...
Sent from my SGH-I897 using XDA App
zzmomo73 said:
Downloading...
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Thanks tell me what you think, And if you run into any problems please tell me
Update has been released for i9000 version, I will update when I get home
Sent From My Cappy Using Tapatalk 2
Updated to version 2.0 check OP for changes
More Changes Coming Soon
Updated To Version 2.2 Updated on my school computer so tell me if there are any errors or problems
Android 4.3 for the iconia a50x is now available!
Working:
audio
sdcards
usb mounting
wifi
bluetooth
SU/ROOT
Camera
trim
etc etc
Not Working:
GPS ONLY WORKS ON A501 for now
Cellular radio not yet functional on a501
Focal app not working
selinux is still disabled
JellyTime 4.3 Release 1
New wallpaper added to jt_wallpapers and set as default
New nexus 7 style transition animations
easter egg jellytime-ified
synced with upstream sources
wifi issues should be solved
http://goo.im/devs/randomblame/iconia/jt-4.3-20130915-Release-a501.zip
GAPPS
http://goo.im/gapps/gapps-jb-20130813-signed.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Source: https://github.com/randomblame/a500_2.6
<3 :good: :highfive: :fingers-crossed:
Good luck!
Sorry guys I got it built yesterday then got distracted I'll see if I can't get it booting this morning
*it looks like my problems are early in init I get a boot USB comes alive but adb never kicks it reboots first so I need to investigate ramdisk.
ramdisk seems fine it may be a problem with my custom package I'm stealing the cm10.2 build changes and going to try running make otapackage that way maybe it's a permissions issue
*ok been looking around and aparantly everyone is using the r1 branch because the r2.1 branch and the dev branches don't quite work lol I'm destroying this repo and syncing again
*FINALLY I got the aosp build system replaced with something a bit more practical and I have a build with a compiled flashable zip woohoo still only a partial boot but it's going faster
*arghhhh I put cm10.2 together in it's super duper early state and didn't get any life out of it either I'm off to bed
randomblame said:
Sorry guys I got it built yesterday then got distracted I'll see if I can't get it booting this morning
*it looks like my problems are early in init I get a boot USB comes alive but adb never kicks it reboots first so I need to investigate ramdisk.
ramdisk seems fine it may be a problem with my custom package I'm stealing the cm10.2 build changes and going to try running make otapackage that way maybe it's a permissions issue
*ok been looking around and aparantly everyone is using the r1 branch because the r2.1 branch and the dev branches don't quite work lol I'm destroying this repo and syncing again
*FINALLY I got the aosp build system replaced with something a bit more practical and I have a build with a compiled flashable zip woohoo still only a partial boot but it's going faster
*arghhhh I put cm10.2 together in it's super duper early state and didn't get any life out of it either I'm off to bed
Click to expand...
Click to collapse
This is still good progess! Thanks for all your hard work. if need be, i can test.
Well I have cm10.2 and also in progress but today I have to pack up the computer and get moved I will definitely get back to it as soon as possible
randomblame said:
Well I have cm10.2 and also in progress but today I have to pack up the computer and get moved I will definitely get back to it as soon as possible
Click to expand...
Click to collapse
I can help test whenever it's needed.
Any progress would really like 4.3 on my a500. In loving or my mytouch 4g slide.
Sent from my MyTouch 4G Slide using XDA Premium 4 mobile app
same here.
symbiiote said:
same here.
Click to expand...
Click to collapse
My desk is set up finally and I just pulled down 18gb of source through 1.5mbps dsl working on it
*ok it looks like my no boot situation was caused by an item listed in my first post it might help if I compile it for the correct cpu
it's ALIVE!
Screenshot
Sent from 4.3 on iconia
Gotta get sdcard fixed up and camera and ramdisk but its working
What about 3G? and will you continue the new kernel?
Sent from my A501 using Tapatalk 2
3g should work I don't have the 3g card in my a501 to test. I got a lot of boot.img problems mostly figured out as well as SD card mounting
Edit
OK I'm uploading a build now.
Uploading at all of 100kbps this is killing me. I think I have camera/omx issues sorted as well not sure till test
OP Updated BUILD AVAILABLE!
camera fixed! Slowly uploading new build.
*EDIT
build 2 up OP updated. Camera fixed
randomblame said:
camera fixed! Slowly uploading new build.
Click to expand...
Click to collapse
Hello
I'm Italian, I installed your Rom is I had no problems installing and booting.
the wifi works well, the GPS satellites located (I have not yet done so to make the fix), the Rom is very fast and responsive (ok that has few apk installed).
Unfortunately, the 3g does not work, does not view the SIM, my provider is TIM (Telecom Italy Mobile)
Congratulations for the great work anyway.
tresed said:
Hello
I'm Italian, I installed your Rom is I had no problems installing and booting.
the wifi works well, the GPS satellites located (I have not yet done so to make the fix), the Rom is very fast and responsive (ok that has few apk installed).
Unfortunately, the 3g does not work, does not view the SIM, my provider is TIM (Telecom Italy Mobile)
Congratulations for the great work anyway.
Click to expand...
Click to collapse
Thanks for the feedback. Can you tell me if it detects the baseband version in settings?
randomblame said:
Thanks for the feedback. Can you tell me if it detects the baseband version in settings?
Click to expand...
Click to collapse
Baseband is not detected "unknow",
I'm installing version 2 to test the camera
-------------
Canera work fine with its apk, focal does not work, forced close
tresed said:
Baseband is not detected "unknow",
I'm installing version 2 to test the camera
Click to expand...
Click to collapse
Thanks