Related
cheers to all x10i guru people. I've got problem with my x10 bootloader which can't be boot to anything .
When i pressed power nothing showing up except the green led blinking.
i've tried all the gadget stuff which can be rescue my x10 but it's failed even seus PC-COMP Flastools
and i also try on omnius when the omnius seeking or my bootloader it gets error code what should i do?
ps. thx for your have earlier
I highly doubt that SEUS fails to restore it... is it possible that you are doing it wrong??
You can try Bin4ry's flashtool...
Sent from my X10i TripNMiUI using XDA Premium App
hidebank said:
cheers to all x10i guru people. I've got problem with my x10 bootloader which can't be boot to anything .
When i pressed power nothing showing up except the green led blinking.
i've tried all the gadget stuff which can be rescue my x10 but it's failed even seus PC-COMP Flastools
and i also try on omnius when the omnius seeking or my bootloader it gets error code what should i do?
ps. thx for your have earlier
Click to expand...
Click to collapse
I have the same problem on my pro, and i just remove and re-insert the battery and the i connect the usb w/o pressing anything... And it works...
If everything fails go to a service point...
hidebank said:
cheers to all x10i guru people. I've got problem with my x10 bootloader which can't be boot to anything .
When i pressed power nothing showing up except the green led blinking.
i've tried all the gadget stuff which can be rescue my x10 but it's failed even seus PC-COMP Flastools
and i also try on omnius when the omnius seeking or my bootloader it gets error code what should i do?
ps. thx for your have earlier
Click to expand...
Click to collapse
i've had the same problem once. search for this firmware: ROOT_F3v3.rar on the forum(sorry cant find the link) and flash it. After that just update using seus or pc ompanion
kistigun said:
i've had the same problem once. search for this firmware: ROOT_F3v3.rar on the forum(sorry cant find the link) and flash it. After that just update using seus or pc ompanion
Click to expand...
Click to collapse
How can he flash it, since his phone dont get in flash mode?
Yperion said:
How can he flash it, since his phone dont get in flash mode?
Click to expand...
Click to collapse
as i understand it the phone wont start up. He said nothing about not getting into flash mode
kistigun said:
as i understand it the phone wont start up. He said nothing about not getting into flash mode
Click to expand...
Click to collapse
Read the first post...
"i've tried all the gadget stuff
which can be rescue my x10
but it's failed even seus PC-
COMP Flastools"
Yperion said:
Read the first post...
"i've tried all the gadget stuff
which can be rescue my x10
but it's failed even seus PC-
COMP Flastools"
Click to expand...
Click to collapse
indeed read! He doesn't say anything about not getting into flashmode only that he tried PC-comp flash tool and that didn't work for him...
anyway this discussion isn't helping him either
Hello Guys
I have a UK Sony Xperia Play which was rooted- using the rooted 2.3.3 kernel Originally and was updated by sony from 2.3.2 to 2.3.3 which worked ok before I rooted the device.
I then decided to use another members rooted firmware which worked - Please see here :- http://forum.xda-developers.com/showthread.php?t=1145729
I wanted to reflash to with 2.3.2 which worked then I did a sony update again over wifi and after that I could not boot the phone at all it just vibrates nothing happens - no boot logo- I have reset the phone by taking the battery out and it is fully charged and it does work in flash mode but when I try to reflash the rom again it using flash-tool and stock firmware the software says it has been done but does not boot. Any thoughts on why this is.The Bootloader has been unlocked previous to root
Thanks
Mark
You've unlocked your bootloader AND updated Over The Air?
Yea he has an unlocked bootloader... There are countless threads warning you not to update over wifi or 3g if you unlocked bootloader... =( try the development forum to see if you can get it unbricked
Sent from my R800i using XDA App
Hi there yes I have unlocked the bootloader the 1st time before I started do u think I should unlock the bootloader again well go through the motions but I cant fastboot blue its stuck in firmware updater green all the time I think its bricked thanks fir your comments I have tried most solutions in the forum without success
Sent from my GT-I9100 using XDA App
Hey guys just got the solution from the developers forum bin4ry freexperia unbrick solution I am happy now
Regards
Mark
Sent from my GT-I9100 using XDA App
Be careful what ever you do because you can destroy your radio if you use the wrong fix.
I have not had your problem but I believe there is a fix binary made as long as you have done nothing to the phone since you bricked it
Edit: /\ lol a little slow I guess /\
Sent from my R800i using XDA App
Glad it worked out for you, sorry I couldn't copy and paste the link for you to unbricked you phone since I'm using the xda app on my play
Sent from my XPlay using XDA App.
Hi
I had the same problem with my xperia play (R8000i), after upload over wifi, my xperia play doesn´t work. i can´t do the fastboot neather the battery charge.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
Someone here already have the solution for that?
Thanks
I have the exact same issue, what's the fix?
EDIT: OK, rather than start a brand new thread I thought I'd just reply here.
Basically, I unlocked and bootloader of my phone and rooted it ages ago, and totally forgot the dire warnings about OTA updates. I spotted someone on here mention that they'd installed an OTA update on a rooted phone and decided to do it, as I've noticed that my Play is really buggy of late.
Of course, this has bricked my phone. When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I've tried plugging the phone into the PC in recovery mode (holding down back, green light comes on) but my PC says I need an S1boot Download driver (which I swear to god I already have, I think I needed it to unlock the bootloader in the first place!). I've followed all instructions, downloaded the drivers and pointed the installer in the right location but I keep getting a message that says the hardware cannot be installed.
I'm running Windows XP, by the way. Can anyone help a foolish soul?
S1Boot Download issue solved: http://forum.xda-developers.com/showthread.php?p=17497338#post17497338
OK already have this driver installed and can use the FlashTool normally, but the Xperia play does not start, and I can not put them in the way fastboot mode.
When I press the power button the phone just vibrates, and if I hold it in, it vibrates every few seconds.
I have used the PC Companion and Update Service did not work
Does anyone have a solution?
You need to wait for the prompt to connect your phone in Flashtool. When prompted, you have to hold down the 'back' button when you plug in the USB cable. The power light should go green to indicate the phone is in fastboot mode.
Had already done this process.
I already made the FlashTool with: R800i_4.0.A.2.368_World.ftf and Xperia Play_Release_Generic UK.ftf
The FlashTool Works successfull but xperia play don´t boot.
You need to flash the special unbrick tft, it's on the forums somewhere
Fastboot = BLUE light (search button+usb). Used to flash/boot with fastboot commands from a cmd window on a pc/laptop and such.
Flash mode = GREEN light (back button+usb). Used when flashing with flashtool.
Regards Dousan...
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Mr_Taser said:
Duddyroar thanks
But I did a search on forum and did not find the file tft unbrick.
You could put the link?
Click to expand...
Click to collapse
I think he's talking about this one by Bin4ry:
http://forum.xda-developers.com/showthread.php?t=1126354
Regards Dousan...
Thanks to everyone who helped.
The phone back to start normally.
Thank very much
How do i rescue my bricked phone!
Click to expand...
Click to collapse
well the answer lies within this thread.
how do you brick a phone
well, there are many ways you can brick a phone.1. you install the wrong software
2.you install a 'broken' rom
3. you install a recovery that isnt supported for our phone
4.or you were messing with your bootloader
etc etc... you get the point
how to rescue a bricked x81st: If you have done a soft brick then you can boot into xrecovery and restore your latest backup. easy
2:if restoring doesn'twork or you have a hard brick then you should either launch:SEUS (sony ericsson update service) or pc companion. click update and follow the steps.
3:if none of that works then you will have to send it off to se. if you dont get some kind of phone company to fix it then its as useless as a real brick lol or a replica of a phone.
3:you can use a flashtool to fix it as well. if you open flashtool you usally get a number of options such as unlock bootloader etc. there should be an option where you can restore it. (lol i think)
Cheersi hope it helped. if it did then please do press the thanks button.
-wilbso
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Chris95X8 said:
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Click to expand...
Click to collapse
ok. besides the complete brick is what i call doomsday. thats just my own little thing lol. and yes i will metion 'bout' the flashtool too
how about hard brick??
X8
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
montekristo said:
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
Click to expand...
Click to collapse
Quite a few people repaired their phones with s1 tool. Iv never actually hard bricked my phone. IV done soft brick> bootloop but I fixed that be restoring a backed in xrecovery so these replies I
Getting are quite helpful. As long as your phone is repaired everything is alright.
sent from my x8 running gingerdx
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
benga_mircea said:
I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
Click to expand...
Click to collapse
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
B.Jay said:
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
Click to expand...
Click to collapse
how did you get this thread back up?
Sent from my X8 using XDA App
wilbso said:
how did you get this thread back up?
Click to expand...
Click to collapse
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Thank you for your help, but I can't acces flash mode or fastboot mode again, lika I use to, after I connect the batery, push the back button, insert the usb, a few seconds and the "sony ericsson" screen pops up again and stays blocked. I think I've killed my phone
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
B.Jay said:
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Click to expand...
Click to collapse
Where did you find it? I mean where did boy find the thread? My Sig? Looking through old posts?
Sent from my X8 using XDA App
B.Jay said:
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
Click to expand...
Click to collapse
Thanks! I tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:43 PM ---------- Previous post was at 11:24 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
benga_mircea said:
The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story!
Click to expand...
Click to collapse
Whoa... that's what I call a "security vulnerability".
If the flash process got interrupted because your lil bro pulled the USB cable I'm somewhat certain the NAND is messed up pretty good - no wonder you're stuck at the SE boot logo.
If there's no way by which you can get the device back to normal (read: even the guys over in the Neo sub-board are out of ideas/help) I think your best shot would be to send it in to SE for repair if you still got warranty. SE should have other means to resurrect the device and slap it back into shape.
I'm sorry I can't really help you here with this - the Neo is different from the X8 and also different from the way my tablets work.
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
benga_mircea said:
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
Click to expand...
Click to collapse
Well, on my Samsung, which has Fastboot, I first enter Fastboot and from there I put the device into download mode for flashing (in theory you can compare "Download mode" to the "Flash mode" - in Flash mode the W/X8 awaits a ROM image to be flashed into the NAND, pretty much the same as "Download mode" works).
Since your Neo isn't completely dead (you just have a shot system due to the flash interruption) you only need to find a way how you can re-write the system.
I lack the time to research how the Neo works, but I think there should be a way to get the device going as you can even "resurrect" a W/X8 where you formatted the system partition (by mistake in CWM, for example). However, that's not as bad as interrupting the USB connection but about the same "ooops" to blank the system.
Flash mode not working, fastboot not workingI Tried a lot of programs (wotan, flash tool, fota unbrick tool, octopus, omnius for se, pc companion, se update. Non of them manages to connect to my phone. If only I could connect for 1 sec. I have a backup of TA, but I can flash it. Thanks anyway!
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
NarutoDroid said:
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
Click to expand...
Click to collapse
yes 11W30 or below should unlock fine but for me 11W33 also no problem
Sent from my E15i using xda premium
Hello!
I read for hour now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
gyurc said:
Hello!
I read for hour now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Click to expand...
Click to collapse
Please post in questions and answer section
And also if your phone can go in flash mode then you can easily flash again
It would be better if you download again cause the previous one might have corrupted
You can find links to download in my signature
Sent from my X10
THeLogiC said:
Please post in questions and answer section
And also if your phone can go in flash mode then you can easily flash again
It would be better if you download again cause the previous one might have corrupted
You can find links to download in my signature
Sent from my X10
Click to expand...
Click to collapse
re posted in q&A
I tried to flash mi 5x rom on A1 and it is in hard brick ... what to do now?
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Lol Lakshay already told ya on the group.It wouldn't have worked.
i cant boot to fastboot even
sooti said:
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Click to expand...
Click to collapse
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
gulatilakshay said:
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
Click to expand...
Click to collapse
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
gulatilakshay said:
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
Click to expand...
Click to collapse
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Rawwr said:
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Click to expand...
Click to collapse
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
gulatilakshay said:
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
Click to expand...
Click to collapse
dont even tell them that you're trying to connect to PC or anything about EDL mode
Rawwr said:
dont even tell them that you're trying to connect to PC or anything about EDL mode
Click to expand...
Click to collapse
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
gulatilakshay said:
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
Click to expand...
Click to collapse
good luck bro
I think Mi A1 not that difficult to get hard brick. Can you still get into fastboot? That day I try to re-lock bootloader with root lol. Also got bricked, appear as Qcom_USB_hulk something like that, but luckily still manage to get into fastboot.
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Rawwr said:
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Click to expand...
Click to collapse
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime? and 3T
gulatilakshay said:
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime and 3T
Click to expand...
Click to collapse
that's great and yes that's the best option as of now
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
What they have done?
jack_21 said:
What they have done?
Click to expand...
Click to collapse
yes even i want to know what did they do?