hi all
i have installed cm_blade_full-179.zip for the blade and must say it seems so much better, but when i get a phone call, it goes through the headset rather the main speaker.
i,m in sound settings in CYMOD settings, and ticked always play on speaker for notifications and ring tones but no good.
am i missing something here?
thanks
Related
I'm sure most of you know what I'm talking about. If you recieve any notifications When listening to any audio through headphones (or through the mini usb port), the device pushes the notification sound through the speaker. This is fine when having a ringer enabled because I'd obviously want to hear the ring. What I dislike though, is when I have notfications (rings, text messages, etc.) on silent or vibrate, it pushes the audio that I'm listening to through the speaker still. I've always disliked this in WM. My PPC6700 did the same thing, but now I'd really like to know if there's a way to change this.
Now that I have an 8GB SD card, my Titan has started to become my primary mp3 player. I do FOH sound at a local club, and when playing music between bands, it's really annoying to have the music suddenlly cut out because a phone call is coming in. Likewise when I'm quietly watching MobiTV with my headphones on at work, and suddenly, Survivorman is blaring through the speaker because a call is coming in...You get the point. The ringer is off, but the phone still trys to let a ring through the speaker anyway, and since no ring is selected, it pushes any audio being played through.
I realize that this relatively simple problem probably does not have a simple solution as this is probably buried deep in the architecture of how WM handles audio gateways...that almost sounded like I knew what I was talking about; I can assure you that I do not . This is where you guys come in. I'm willing to test any ideas you guys have got. I don't care if it f&#*s up my phone...a hard reset isn't going to ruin my day. I'd just like a solution for this.
Ideas??
Thanks for your help and for this forum!..it has saved my phone more then a few times already.
Me too having the same problem. I listen to music via my bluetooth mono headset and these notifications (whcih I get plenty) disconnect the bluetooth audio gateway, forcing me to reach out to my phone and enabling the audio gateway again.
Yeah, I hate that too! I have the i760, one other thing on this phone I dislike is that the volume must be on to hear audio through my headphones. But there I am in a store listening to some rock at a loud volume, and there it is playing for the entire f'n store to hear when I get a call, thanks PPC!
Possible Solution!!!!
Might I recommend a Profiler. Like PPCProfiler. Just Google it.
What you could do is create a profile called music or what ever you want to name it. Then you could set up that profile to turn ringers on with the volume level you like and with or without vibration and select silent or vibrate only for the notifications. You could really but together any combination. I believe with PPCProfile you can even make a profile as a Headset Mode. So it will auto detect the headset and switch without having to do anything else.
Cheers.
Curious G.
Thanks for the reply, but a profiler isn't exactly what I'm looking for. I've had them before in previous roms. The problem isn't that it's an inconvienence to switch to silent or vibrate. It's that when things are silenced or on vibrate, any background audio is pushed through the speaker while the notification is going off. Meanwhile that audio that I want to be played cuts out of the path that I want it going through (ie. headphones).
Thanks tho...I'm open to any ideas.
hi,
how can i disable the rear speaker while listening to music with headset.
because, if the phone rings or any phone notification apperars, the speaker becomes active. so the music playing on player on speaker with the notifications. this is very disturbing..
thanks in advance for your suggestions
you cant
thats not possible, simply because nokia has this feature on some N series where when headphones are connected the speaker will not ring only the headphones will sound, this bacomes a problem if you lose your phone in loud places and no one can hear it. also, the alarm doesnt sound.
you could always put your phone on vibrate!?!?
thanks your reply, but after call the notification sounds on speaker. is there a way to turn steaker off after call?
i solved my problem changing hkcu\\controlpanel\soundcategories\ring\speaker value to '0' and soft reset now When the headset is plugged, if the phone rings speaker dont active.
I'm having a strange problem that I'm trying to see if it's bluetooth stack or CM 10.1 related. When I'm sitting here at work listening to my bluetooth headphones (Jabra BT3030), anytime a phone call comes through, the headphones mute and the ringer AND the music I'm listening to start blaring out of the rear phone speaker. I have to reject the call, stop the music player, and then call the person back. The headphones I'm using also function as a handsfree headset, so, in theory, the phone ring, music, and all answer/deny functions should be handled by the headphones. They've certainly worked this way on every other Android phone I've owned, so I was just curious if this might be an oddity of the new BT stack on 4.2.1, a bug in CM 10.1, or even possibly a setting I'm missing that's causing me this issue. Anyway, when I call the person back, the headphones take on the role of handsfree headset just fine.
Thanks in advance!
I am experiencing the exact same issue on my Galaxy S3 using Moto S305 headphones and CM10.1. I've been searching all over for a solution to this problem and haven't had any luck.
I figured out how to stop the music player audio from coming out of my speaker when receiving a call while on bluetooth. If you turn your ringer volume up then it won't send the music from the player out the speaker phone. When you have the ringer set to vibrate only then it sends your music out the speaker. But I don't want ringer noise either, I just want it to vibrate. My solution was to take my favorite ringtone and insert 5 seconds of silence before it starts to ring. That way I have 5 seconds to either reject the call or answer it before it starts making noise.
I have an interesting issue:
If I have my Blue Tooth headset on and connected, I can listen to music through it , I can hear notifications for text, email, etc and youtube audio plays through it just fine, but whenever I get a call, it doesn't matter if it is a stock ring tone or a music/mp3 tone it will always play through the phone's external speakers instead.
Is there a setting , tweak or app to change this so the tone will play through the headset only or both?
I have the same issue but mine is through the headphone jack when using as a line out/aux to my car stereo. Music, video, navigation etc. plays fine. But ringtones ALWAYS switch to external phone speaker.
A big annoyance.
Glad I am not the only one. Thanks for replying. Not sure what the deal is, hopefully someone will chime in and confirm if it is a hardware or software issue. I have never had a phone that wouldn't play the ringtone through bluetooth before.
carlz28 said:
I have the same issue but mine is through the headphone jack when using as a line out/aux to my car stereo. Music, video, navigation etc. plays fine. But ringtones ALWAYS switch to external phone speaker.
A big annoyance.
Click to expand...
Click to collapse
Not to revive a dead topic , but it just occurred to me that if I don't want to hear the ringer play through the phone then I need to silence it when I have my bluetooth connected. I just set up 2 Automatelt rules;
Bluetooth Connected / Ringer Off -
On device connection > Set ringer to Silent/Vibrate
Bluetooth Disconnected / Ringer On -
On device disconnection > Set Ringer to On/Vibrate
I am going to give this a shot and see if it works. I am betting that I still hear the musical crescendo in my headset while the phone is on silent.
Same
I have been having this same issue.
d3db1t said:
Not to revive a dead topic , but it just occurred to me that if I don't want to hear the ringer play through the phone then I need to silence it when I have my bluetooth connected. I just set up 2 Automatelt rules;
Bluetooth Connected / Ringer Off -
On device connection > Set ringer to Silent/Vibrate
Bluetooth Disconnected / Ringer On -
On device disconnection > Set Ringer to On/Vibrate
I am going to give this a shot and see if it works. I am betting that I still hear the musical crescendo in my headset while the phone is on silent.
Click to expand...
Click to collapse
I'm having this issue as well. Where is this setting at for these rules?
Also a guy I work with has a RAZR maxx with the stock unrooted 4.3 room and his does the same thing. So I think it's a software issue.
Macguyver said:
I'm having this issue as well. Where is this setting at for these rules?
Also a guy I work with has a RAZR maxx with the stock unrooted 4.3 room and his does the same thing. So I think it's a software issue.
Click to expand...
Click to collapse
The rules you speak of are Automatelt (its like tasker / llama ) rules , you can get Automatelt in the appstore, the free version is all I have needed so far.
Hi! I am currently running Wanamlite v3.4 (GT-i9500) and just a bit of curiosity I tried entering the Test/Service Menu. All of the tabs are working, then I noticed that nothing happens when I press Speaker, but when I try pressing the Speaker (R), a loud music plays. From my understanding, S4, both international versions have only 1 Loud Speaker. I can still hear the ringtones whenever someone calls or texts me, notifications and also perfectly functioning for both video and music playback, so that means the loud speaker works fine. Then I have read in another thread that S4 has 2 speakers, left and right, and the Speaker tab corresponds with the Left Speaker? It is quite confusing.
Hope someone can enlighten me on this. I hate bringing this to a Samsung Service Center.
Many thanks!