what can i do.
inserting data cable to computer.
and nothing.
cable itself works-tested on other device.
zukko said:
what can i do.
inserting data cable to computer.
and nothing.
cable itself works-tested on other device.
Click to expand...
Click to collapse
What OS do you use on your computer ??
Related
My S4 does not show up in My Computer, it normally shows up and I can click it and go into either my phone drive or SD drive, but now nothing.
USB Debugging is on, and the phone does charge. I tried reinstalling the drivers, restarting the phone while plugged in, and I do not have a USB utilities option. Android version 4.2.2.
It sounds like a computer issue. Wipe your hard drive and re install windows that should clear it up and have your phone showing up again. Otherwise your phone is infected with the samsung virus and I can actually fix that for you if you PM me your details.
ss_gohan said:
My S4 does not show up in My Computer, it normally shows up and I can click it and go into either my phone drive or SD drive, but now nothing.
USB Debugging is on, and the phone does charge. I tried reinstalling the drivers, restarting the phone while plugged in, and I do not have a USB utilities option. Android version 4.2.2.
Click to expand...
Click to collapse
Bad usb cable or port. Try a different cable or a different usb port. Not all usb cables can pass data, some only charge. It is always best to use the cable that came with the phone when transferring data via usb.
cruise350 said:
Bad usb cable or port. Try a different cable or a different usb port. Not all usb cables can pass data, some only charge. It is always best to use the cable that came with the phone when transferring data via usb.
Click to expand...
Click to collapse
I use the cable that came with the phone, it was working before.
What kernel? If KT uncheck fast charge in kttweaker app under extras.
SGS4 Sent
ifly4vamerica said:
What kernel? If KT uncheck fast charge in kttweaker app under extras.
SGS4 Sent
Click to expand...
Click to collapse
Kernel version 3.4.0-95334
Anyone know how to fix this?
My phone usb port doent respond, except to charge. Its definitely not the drivers on my computer, as even my usb on the go doesnt work. Anyhow....other than that, the phone operates fine. Is it possible to manually flash this file without using usb cable? And any idea whats wrong with my usb, i have a new usb board on the way, but i got a feeling that wont fix it.
findinghomer said:
My phone usb port doent respond, except to charge. Its definitely not the drivers on my computer, as even my usb on the go doesnt work. Anyhow....other than that, the phone operates fine. Is it possible to manually flash this file without using usb cable? And any idea whats wrong with my usb, i have a new usb board on the way, but i got a feeling that wont fix it.
Click to expand...
Click to collapse
Nope its not possible
It's there any setting needs enabling to get my pc to recognise my note 4 I'm overlooking?
I have kies installed.
I am not connecting using the OEM cable (don't know if this matters or not? )
There are some USB cables that do not pass data so the cable itself may be no good for data. If the cable would pass data your PC would recognize that something is hooked up to it.
Did you install kies 3.0 and updated it? Try doing it and reconnect your phone then wait for the drivers to be reinstalled
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
sercankd said:
I want to flash roms to my note3, since yesterday i tried everything. problem is i cant use my usb cables to transfer data to my phone. device is not recognized by computers. i tried 5-6 different usb cables some of them work with other devices, tried to remove drivers and reinstall them, tried mac,linux, windows 8.1 device is not recognized. even in download mode when i plug usb cable it charges only. i crawled through google found some kernel related problems which i cant do anything about it without working usb cable, i think my usb port might be broken somehow.i don't wanna buy usb port flex cable if there are any other solutions.
Click to expand...
Click to collapse
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Rosli59564 said:
As you said the cables work for other phones so they're not usb3/original note 3 cable?
Sent from my SM-N920C
Click to expand...
Click to collapse
one of them is note 4 original cable, also i have note 3 original cable all of them wont work
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
dutch55 said:
MicroUSB connector may be damaged. You should be able to use adapter to connect the MicroSDHC card to a PC, copy the new ROM etc. to the card and install from there.
Click to expand...
Click to collapse
I think that he would not be able to install a new ROM from the card, as he would need a custom recovery that in this case can't be installed, because the phone is not detected by the computer.
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
sercankd said:
To anyone faces similar problem, i have replaced usb charging port and problem solved. its very easy to do.
Click to expand...
Click to collapse
Glad you were able to replace the USB port on the phone. regarding being able to do the first install of a rom without a PC, if you can get root (in the case of an AT&T Note3, with Towelroot), then I believe you can use MobileODIN to install ROMs without a PC.
I had a different phone, a Samsung Galaxy S with a damaged USB port with no data connectivity that a repair shop was unable to repair it.
Hello, I wanted to install a new ROM to my Samsung S4.
Unfortunately it failed and I have deleted the old OS and all files.
I can't use my external sd card in this phone, so I have to connect the phone via TWRP (V.3.0.2-0) with my computer.
I have tried a Win7 Starter Netbook and a Win10 Notebook and I cant' see my phone. I have tried to install the ADB drives, which where recommented here (https://highonandroid.com/android-r...r-android-in-a-bootloop-with-no-os-using-adb/) and still no chance.
I can charge the phone without problems and I have shortly tried it with an USB stick with Linux.
Should I buy a UTB OTG adapter for an USB Stick or do someone have some hints for me?
You should try different USB cables and USB ports to flash a stock ROM using Odin.
audit13 said:
You should try different USB cables and USB ports to flash a stock ROM using Odin.
Click to expand...
Click to collapse
Ok, thank you. I have tried different USB cables and USB ports. I didn't have flash a ROM via Odin for a long time.
Where did I find a instruction for it and the correct files?
I didn't see "Added" in Odin, when I try to connect in Download Mode.
If Odin doesn't assign a com port to the phone, you may need to install the Samsung drivers.
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
audit13 said:
If Odin doesn't assign a com port to the phone, you may need to install the Samsung drivers.
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
I already did this before trying odin. I have tried to install the Samsung drivers again and nothing changes.
GrischaK said:
I already did this before trying odin. I have tried to install the Samsung drivers again and nothing changes.
Click to expand...
Click to collapse
The drivers installed properly? What's the exact model # of the phone? Is it possible the phone's USB port is damaged?
audit13 said:
The drivers installed properly? What's the exact model # of the phone? Is it possible the phone's USB port is damaged?
Click to expand...
Click to collapse
How is it posssible to install samsung drivers not properly?
I can charge the phone without problems, so it isn't damage.
GT-I9505 is the model.
GrischaK said:
How is it posssible to install samsung drivers not properly?
I can charge the phone without problems, so it isn't damage.
GT-I9505 is the model.
Click to expand...
Click to collapse
It's possible that the drivers may not install without having admin rights on a Windows machine.
The usb contacts for charging are not the same contacts used for data transfer; therefore, a usb cable can charge the battery but not transfer data. Does the phone recognize an otg drive?
There isn't much you can do until Odin assigns a com port to the phone other than trying with Heimdall.
I have bought an usb adapter for usb sticks and in TWRP the stick is shining, but I can't see the files on the stick. I have tried to mount USB and I don't understand, what I have do to next, because I didn't see any difference, I can't go back and try to find the files.
The USB port contacts for transferring data may be damaged.