I'm confused (normal) regarding TF "reset".
The easy one (I think) is "Factory Reset" from "Settings" menu - Wipes out all data including MicroSD ? - Does it do anything else ?
Then we have depress and hold "Power Button" for 10 - 12 seconds - Then what ? - What does it do ?
Now I hear press "+ Volume" and "Power Button" - Then what ? - What does it do ?
HELP !
transformerfan said:
I'm confused (normal) regarding TF "reset".
The easy one (I think) is "Factory Reset" from "Settings" menu - Wipes out all data including MicroSD ? - Does it do anything else ?
Then we have depress and hold "Power Button" for 10 - 12 seconds - Then what ? - What does it do ?
Now I hear press "+ Volume" and "Power Button" - Then what ? - What does it do ?
HELP !
Click to expand...
Click to collapse
factory reset is going to delete all your data and restore it to the state it would be in if you opened it new.
depressing power is a normal reset... like a shutdown or a reboot...
volume up and power is NVFLASH (firmware flashing bootloader type screen)
volume down and power allows you to flash an asus supplied zip file on your external uSD memory.
Run Samsung B7510 Galaxy Pro Downloader.
Make sure these options is checked: Auto Reboot - Protect OPS.
Click OPS button and select: BENNETT_v1.0.ops
Click BOOT button and select: APBOOT_B7510xxxxx_CL968357_REV00_user_low_true.tar.md5
Click Phone button and select: MODEM_B7510xxxxx_REV00.tar.md5
Click PDA button and select: CODE_B7510xxxxx_CL968357_REV00_user_low_true.tar.md5
Click CSC button and Select: CSC_B7510Oxxxxx_CL951730_REV00_user_low_true.tar.md5
Put the phone into Download Mode ( Press Q key + Power button ).
Connect USB cable to phone and PC and make sure the program detect it.
Click Start button to begin updating the phone.
Do nothing till all is done and you can see PASS word on the program window.
Do Full reset by this Code *2767*3855#
sekhargreen said:
Run Samsung B7510 Galaxy Pro Downloader.
Make sure these options is checked: Auto Reboot - Protect OPS.
Click OPS button and select: BENNETT_v1.0.ops
Click BOOT button and select: APBOOT_B7510xxxxx_CL968357_REV00_user_low_true.tar.md5
Click Phone button and select: MODEM_B7510xxxxx_REV00.tar.md5
Click PDA button and select: CODE_B7510xxxxx_CL968357_REV00_user_low_true.tar.md5
Click CSC button and Select: CSC_B7510Oxxxxx_CL951730_REV00_user_low_true.tar.md5
Put the phone into Download Mode ( Press Q key + Power button ).
Connect USB cable to phone and PC and make sure the program detect it.
Click Start button to begin updating the phone.
Do nothing till all is done and you can see PASS word on the program window.
Do Full reset by this Code *2767*3855#
Click to expand...
Click to collapse
is this for froyo or GB ?
---------- Post added at 08:37 AM ---------- Previous post was at 08:34 AM ----------
siihdlte said:
is this for froyo or GB ?
Click to expand...
Click to collapse
and where is the link for download ?
Disclaimer: I am not responsible for what YOU do to your tablet...
You assume all responsibility and risk associated with flashing any ROM. Make a backup!!!
ICS 4.0.3 for our xPAD-70 (Type 1 iDx7) and xTAB-70 (Type 2 iDx7).
I must say, that these roms very fast and stable.
What's Working:
camera
touchscreen
physical buttons
wifi
audio, ringtones, notifications, alarms
microphone
root
adb
sdcard
sensors
usb host
everything
Install instruction/download links:
1. Connect the home charger to the Tablet PC. Charge the battery.
2. Download the compressed file to your PC/Laptop.
3. Create an empty folder on your desktop PC / laptop. Extract the downloaded .zip file into this empty folder.
4. Copy the four extracted files ("update.zip", "uImage_recovery", "uImage", "u-boot-512M-UartB.bin","factory_update_param.aml") to the root folder of an empty microSD card (2GB or higher). I you want to wipe and install manually, just delete the factory_update_param.aml file and boot into recovery without that.
5. Safely remove (disconnect) the microSD card.
6. Turn off the Tablet PC, but keep the home charger connected to it.
7. Insert the microSD card into the Tablet PC. After this step, don't pull out the microSD card.
8. Press and hold down the "volume up" button.
9. While holding down the "volume up" button , press and hold down the "power on" button for 6-9 seconds, and release the buttons after the last "upgrading... please wait" like messages.
Navigation inside the menu:
- Volume up and down buttons can be used to select a menu item.
- The "back" button (which is between the "home" and "menu" buttons) will activate a menu item.
10. Dont forget to hit the thanks button
Downloads:
==============
xPAD-70 (Type 1 iDx7) ICS 4.0.3 :
==============
ROM:http://www.mediafire.com/?1iqt5f1uamtrw2f
==============
xTAB-70 (Type 2 iDx7) ICS 4.0.3 :
==============
ROM: http://www.mediafire.com/?gtlqgdk33bhhtj2
===============================
ROOT packcage for ICS roms, xPAD/xTAB(apply after installig the upgrade) :http://www.mediafire.com/download.php?pfrrx7ja502qz2j
===============================
Older ROMs:
soon...
The language could be hungarian, but you can change to english with these settings:
1. Beállítások (its the hungarian word for Settings. Its in the menu) 2. Nyelv és billentyűzet (means Language and keyboard) 3. Nyelv kiválaszása (Select language) 4. Chose the English languge from that list. Thats all.
Copyright:
=========================================
[email protected]___________________
=========================================
2 links for xPAD-70 ?
murigny64 said:
2 links for xPAD-70 ?
Click to expand...
Click to collapse
Sry, i corrected, the second is the xTAB-70 ICS 4.0.3
I can't get BBC I player or Netflix to run with this rom. I get sound but no picture. Does anyone know why. Avi files run fine. Otherwise the from is very good. Been following this on the Hungarian forum but relying on google translate. Only other issue is the inertia scrolling.
Cheers carrotts
Sent from my xPAD-70 using xda premium
I have no idea about Netflix. Is seems to be working with CM nightlies. There is a XDA thread about netfix. I hope there is a solution for this.
This is the link: http://forum.xda-developers.com/showthread.php?t=1076150
The inertia scrolling fix appears in the next rom update. I hope.
cant use boot menu
Hi when i restart in boot menu i cant navigate it
When i press any button it reboots,
Anyone know if a setting needs adjusted?
As really needs updated
I got a question too....
I copied the files on SD Card but when i Press "volume Up" and "Power" Butten i get the upgrade Message and after the secon one he starts flashing but he doesnt start. i only get the waycom logo and the he reboots ....
Can someone help me?
Hello,
Do you have copy of ROM for similar device xTAB-70i ?
I am looking for Wayteq_xTAB_70i_20120620.zip.
I have recently bought a HTC G1 and now ready to flush any stable custom rom like gingeryoshi or CM6 but sadly it looks like its a bit late now to ask any of these, cause all the links provided here ( I have searched nearly thoroughly) are either dead or not working any more. so now can someone guide me step by step (even the smallest steps) from the beginning that means from rooting the device to the latest andro update (gingerbread)... please is there anyone??? cause in 6 months i'm already in love with this device... with its usability... please help!
p.s - i'm a newbie, dont have any experience of rooting or anything but computer friendly enough to handle little command or this and that... so it wont be annoying...
so i've got this process... looks good... but the downoadable components were in Megaupload, that now shows FBI Warning... helpless..
I) Formatting the SD Card and Downgrading to RC29
(YOU WILL DELETE EVERYTHING OFF YOUR SD CARD!)
1. Plug your USB cable into your computer and then plug your phone in.
2. Mount your SD card by sliding down the notification bar and selecting mount.
3. Go to My Computer and access your SD card.
4. BACKUP ANY FILES THAT YOU WANT ONTO YOUR COMPUTER. VERY
IMPORTANT!
5. Go back to my computer and right click on the drive that is your sd card. Click format. Choose FAT32 from the drop down and hit the format button. This removes all data from your memory card.
6. Once the format is complete: drag and drop "DREAIMG.nbh & Update.zip files that you downloaded into the sd card. (DO NOT create a folder or anything, just put it right in the SD card)
7. Unmount your phone by going through the notification bar and then unplug your phone from your computer. Them turn off your phone.
8. Press and hold the camera+end key until until you see a screen with colored bars, then let go. This is the bootloader. The screen will turn gray with blue writing on it.
9. Hit the end key to start the update. DON'T DO ANYTHING UNTIL THIS IS DONE!
10. Once it is finished press the trackball to reboot. (If it goes back the the colored bar screen and doesn't reboot try holding the home+menu+end key, if this doesn't work, just remove the batter and put it back in and turn the phone on)
11. Once the phone is on, just turn it back off.
12. Now press the Home+End keys until you see a triangle with an exclamation point in it (this is recovery mode). Once you see this let go of the buttons.
13. Open the keyboard and press the ALT and L buttons, and then Press ALT and S buttons. Now wait until the phone reboots (it will do this automatically once the update is applied) (Don't worry if you see picture of a box and a g1 or a chip with an arrow)
14. Once the phone reboots, go ahead and and go through the welcome guide and get to the home screen.
II) Flashing a Recovery Image
1. Now with your phone at the home screen, go to settings>applications> an turn on unknown sources.
2. Now go to settings>SD card and Phone Storage>Unmount SD Card
3. Now Click format sd card and go ahead and format your sd card. It will automatically remount after.
4. Go back to the home screen and plug and mount the phone to the computer again as you did earlier.
5. Place the following files you downloaded earlier right into the sd card: FlashRec.apk, and Amon Ra's Recovery Image (Again not in any folder or anything, just on the sd card)
6. Once they are transferred go ahead and unmount and unplug your phone from the computer
7. Go and download a file manager from the android market (I suggest LINDA FILE MANAGER)
8. Once downloaded, open the file manager and go to SD card, and click the FlashRec.apk file and then click install. If it asks -> Tell it to use package installer to open it (it probably wont ask but if it does)
9. Once installed click open (it will be on bottom left of screen)
10. Then click the button that says "backup recovery image"
11. Once it says "backup complete" open the keyboard and type the following: /sdcard/recovery.img
12. Then click "flash custom recovery image" and wit until it says "Flash complete"
13. Go back to the home screen and then turn off the phone.
14. Turn the phone back on into recovery mode by holding down the home and power buttons. You will see a bunch of text on top of a black background with an HTC logo in the middle.
III) Partitioning and Loading the latest radio
1. Scroll down to "Partition SD Card"
2. Click "Partition SD"
3. Press the Home key to confirm
4. Use the trackball to increase the "swap size" to 96MB then press Home key
5. Make sure "EXT2" is set to 512 MB then Click the Home Key
6. Make sure "Fat32 size" is set to remainder and then press the Home Key and then the phone will begin partitioning.
7. Once partitioning is complete scroll down and select to "SD: ext2 to ext3" and then press the Home key. Wait for it to upgrade.
8. Once the Upgrade is complete hit the "back" button to get back to the main menu. Then scroll down and select "USB-MS Toggle" and wait for it to enable.
9. Now plug the phone into the computer again. Now transfer the files downloaded earlier: G1 Radio, G1 HardSPL, Generic G1 Rom w/ root, to the phone. (AGAIN KEEP THE FILES JUST IN THE SD CARD AND NOT IN A FOLDER OR SOMETHING)
10. Once the transfer is complete hit the Home key to disable the USB-MS toggle and return back to the main menu of recovery mode. Unplug your phone.
11. Scroll down and select "Flash .zip from SDcard"
12. Select the G1 Radio file (named OTA Radio or something like that) and hit the Home key to confirm. DO NOT SELECT ANY OTHER FILE, THE RADIO MUST BE DONE FIRST.
13. Once the Radio Flash is complete Press Home+Back to reboot the phone. It will then say "writing radio image" and then reboot back into recover mode (this will take some time)
14. Once back into recovery mode, scroll and select "Flash zip from SDcard" again.
15. This time choose the SPL file (named somthing like "Latest G1 SPL.zip") and then click the HOME KEY to confirm.
16. Once it finishes, hit HOME+Back to reboot once again. It will say "writing boot image" and then reboot
back to recovery mode.
17. Once again scroll to "Flash zip from SDCard" and choose the Generic G1 Rom file (Named something like Generic G1 Root Rom.zip) and click Home to confirm and wait for it to finish.
18. Once finished it should go back to the main menu and say"Install from SD card complete"
19. Now click on the "Reboot System Now" choice. (Home+Back)
20. Wait for the phone to reboot back into Android.
IV)Installing CYANOGENMOD 6 (Android 2.2 Froyo for HTC DREAM)
1. Once back into Android, turn the phone back off.
2. Hold the Home + power keys to turn the phone on and get it back into recovery mode
3. Select "USB-MS Toggle" and wait for it to enable
4. Once enabled, plug your phone in and transfer the CYANOGENMOD6 and GAPPS file ito your SD card/phone. (again not in any folder, just in the sd card)
5. Once the files are transferred, press the Home key to disable USB-MS Toggle and return to the main menu, and then unplug your phone.
6. Scroll down and select "wipe" and then select "wipe data / factory reset" and then hit the Home key to confirm. Wait for it to finish the wipe. It will say "Data wipe complete"
7. Hit the back key to return to the main menu.
8. Scroll and select "Flash Zip from SDCard"
9. Select the CYANOGENMOD 6 ROM Named something like "update-cm-6.0.0-DS-RC1-signed.zip" and hit Home to confirm and wait for it to finish.
10. Once finished it will go back to the main menu and say "Install from SD Card Complete"
11. Go back to "Flash Zip from SDCard"
12. Select the Gapps File Named something like "gapps-mdpi-FRF91-3-signed.zip" and click home to confirm.
13. Once it is finished you should be back at the main menu. Select "Reboot System Now" and wait for the phone to reboot.
14. The reboot will take some time, (roughly 5-10 minutes) so don't freak out. Just put your phone down and go do something =)
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Rooting
this is how to root
http://forum.xda-developers.com/showthread.php?t=668090
this will give you links to tips and understanding about android and the g1
the roms found here are all over a year old but plenty are still "good" newer roms are in the development section, usually the first 2-3pages will have most of the newest roms
There are a few good roms here and there for the G1.
Don't let the newbie reply fool you, just an old dev starting under a new name.
I would suggest:
For froyo: FroyobyLaszlo, DreamTeamFroyo
For gingerbread: ezGingerBread, CronMod, ADSMagpie
Thanks every one... after going through the rom bible for a few times i was also thinking about ezGingerBread... thanks thanks thanks for the working downloads... got all the files needed...
http://forum.xda-developers.com/showthread.php?t=882356
now i need to know status of my phone, the radio or firmware version... i'm posting whatever i could get out of my phone... will just flushing do? as mentioned in the ezgingerbread page of xda developers?
Model number: Android Dev Phone 1
firmware Version: 1.6
Basband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.6.29-00479-g3c7df37 android [email protected]#19
Build number: dream_devphone-userdebug1.6 DRC8314721 test-keys
you have a developers phone so you dont need to root. but it would be a good idea to add a custom recovery and update your radio/spl. unless this has already been done. you can check by powering on while holding the camera button, write down everything on this screen
Sent from my HTC Vision using xda premium
Ok just did the camera button power up
It says
DREA*** PVT 32B
H Boot - 0.95.3000
CPLD - 4
RADIO - 2.22.19.26I
Oct 20 2008
Serial - 10
you probably still have a stock recovery, you should change this to either amonra or clockwork
you also need to upgrade your spl(hboot) to either .2005 or .2003
then you mentioned you wanted to try ezgingerbread, for this you need the 2708+ update (ram hack)
you will need to updgrade radio to .08 or .25
then upgrade spl to .13d
all the how to's are found all over these threads, search around a bit and if you get stuck just ask again. these same questions are asked weekly still so there are loads of threads with detailed instructions found everywhere
Sent from my HTC Vision using xda premium
http://forum.xda-developers.com/showthread.php?t=831139
That will give you all of the information you need to get a custom recovery and updated radio on your phone.
so I was planning on flashing a new ROM to my HTC HD2 (currently on Paranoid Android)
but I accidentally chose
Ad Hardreset and lost my AD recovery. I cant go to recovery
it says
android row load
error cannot read ramdisk image
what do I do?
Should I follow this step?
1. FLASH CLOCKWORK MOD TO YOUR DEVICE
NOTE: There are 3 CWM images attached at the bottom of this thread. You only need to install 1 of the images depending on what type of Android Rom you want to flash. The larger the size of the CWM Partition the less space there will be left for programs installed to your phone.
150MB Partition - For lite Roms without Sense such as CM7. Gives most internal space on your phone for apps
250MB Partition - Standard size Roms or squashed Sense Roms
400MB Partition - Full Sense Roms. Hardly any internal space for apps. 512ROM Leo's will need A2SD external partition set up
If you arent sure which size you need then check the first few posts of the Rom you want to flash as it will usually tell you which size partition it needs.
1. Download the CWM Partition you require and extract it to a new folder on your pc
2. Connect your phone to your pc via the USB Cable
3. Restart your phone and HOLD DOWN the 'End Button' (far right) until the Magldr Menu appears
4. Keep pressing the 'Volume Down' button to goto Option 5. USB Flasher and press the 'Call Button' (far left) to select it
*The screen should now say Wait USB...USB*
5. Run DAF.exe (Right Click and Run As Administrator if you have Vista or Windows 7) in the folder you extracted the image to and follow the intructions on your pc to start flashing
6. After flashing the phone will reboot. HOLD DOWN the 'End Button' (far right) until the Magldr Menu appears
To start Clockwork Mod keep pressing the 'Volume Down' button to goto Option 8. AD Recovery and press the 'Call Button' (far left) to select it
Help Please!
edit: NVM got it working again, followed th steps above!
I just Love trial and errors )