Related
Self-dangerous noob here. NC 1.2, theoretically returned to stock
History:
Got NC 1.2
Rooted w/ManualNooter 4.5.25. Everything seemed to go great. So...
Downloaded, backed up, and flashed CM7 in ROM Manager
Wouldn't boot...hung on n COLOR screen
Same results w/ Phirerom (CM7 based - doh)
Able to restore MN4.5.25 from CWM - BUT noticed "Error formatting /data!" during nandroid restore. Didn't seem to matter...restore successful
Get "Error formatting /data!" no matter what
Able to boot into CM7 from SD, but it has "problems". For instance, there are no "back" or "return" softkeys. So there is no way to navigate around any app! Only the hard "n" home key works
Reflashed stock 1.2
Seemed to work, began to ask me to reregister. BUT, it won't display the keyboard, so I'm stuck at the "Login with your existing B&N...." screen! Keyboard flashes up and then immediately disappears!
As an noob, it occurs to me that all my problems are related to my inability to format the /data partition (if it's even called a partition).
Can any of you awesome people help me? And, if I'm in the wrong forum, any directions would also help. Thanks.
Same error here
If anyone can help with this it would be much appreciated.
have you tried removing CWR then do the 8-boot reset?
No, every time I've done it, it boots into CWR. Maybe REMOVING it will help. lol. Sorry to be so inept. I can flash the 1.2 stock that will remove CWR. Is that the way to do it?
Worked like a charm
Removing CWR and 8-boot-interrupts did the trick. I'm now back to a fully stock NC 1.2.0. Ready to roll up my sleeves and re-brick!
This is the most amazing community. The closest thing I have to any technical knowledge is speaking a little Klingon. VERY little. But, I have learned more here by reading these threads for a couple hours...OK, several hours... than my wife has learned in a dozen trips to the apple store. I feel more empowered every day. You are all great. Can't thank you enough.
Goldie, I wasted a bunch of time on this last night. I'm guessing you have a new nook. If you do, slap cwr on your SD (3.0.2.8 or something) and look for the thread that tells you how to repartition your nook. Follow instructions to set it to the old way. After that run manualroot zip through cwr. Reboot to cwr and wipe data, system, cache. Finally install your rom of choice from your SD card through cwr. That's what I did to finally get it to work.
Thanks. I'll give this a try. As you probably guessed, I DO have a new NC, and while I was able to get it back to 100% stock, and easily reregister it, I had the same results. The ONLY way I can get CM7 running is off the SD card. So, I'll try the partitioning trick. Why do I get the feeling this is going to work? Unfortunately, I'm not on dev's time... I'm at work by 7:30am EDT, but in bed pretty early. I REALLY appreciate the response. Later this week I'll install SDK, and all my tools at home so I'll be able to stay up all night with you awesome folks.
still looking for the thread on re-partitioning. I found the thread on restoring, but I get the error every time I try to reformat the /data.
No luck. I can restore to stock 1.2, reregister, and MN 4.5.25, all easily. BUT, once I flash CM7 (or Phiremod 6.3, etc.) it hangs at the "n C O L O R" screen (C O L O R flashing at various speeds just to fool you into thinking it's actually going to work). Here's what I've noticed...after flashing CM7, the ADOBE screen no longer flashes up at boot. Once it fails to boot the Adobe software, it won't boot at all. So, for now, I guess I'm running CM off my SD unless anyone can suggest anything.
Goldie u have to repartition to get it working. Ill go look for the thread. Also maybe you should try out the cm7 mod over the phiremod Tom. I'm on phiremod now and the lag is killing me
Wow that was painful to find. Needs a sticky.
http://forum.xda-developers.com/showthread.php?t=1094371
Edit: I take that back about the lag, set your cpu to 1200 in the ROM and change yourgovernator to interactive for an amazingly smooth experience
I've been going nuts trying to figure this out. I too ran into the "error format /data" message but I powered through it only to end up at at the Android logo--nothing. Out of frustration, I returned to CWR and wiped everything--like on my Evo (did not go through to mounts option). That seemed to go through /data but I don't know the difference between a wipe and a format (I'm looking...). Still got bootloops. I tried to return to stock but the 8 interrupts wouldn't work.
Pressing START and N worked though and that got through to CM7 and it's working great now but I'm afraid to do anything else because I still get the "error formatting /data" message.
I've heard horror stories (bricking beyond repair--if that's possible) of users repartitioning their drives though so... I hope there's another solution out there.
I love this community!!
Sys:
Thanks a million!! Everything perfect!! I just can't say enough about this awesome community, all the amazing devs.
heh you're more than welcome . i hope this helps anyone else that stumbles on your thread as well. Ive been having fun with my nook but i think its time to trade it out for something a little bigger. Maybe ill just wait till att gets its flavor of gs2 idk. So many choices out there!
thanks guys!
i just had the same problem and falshes all kinds
of zips until i found this post.now i've launched cm with status bar
really really thanks
this worked great for me too! i had a nookcolor bought in december and it had a messed up chargerand 6 really bright white spots that were really noticiable. went to b&n store and the guy just gave me a new one. it came with 1.2 and i had the cwm sd from the old one. so tried restoring my cm7 backup from the old one and error formatting data came up. flashed this zip, and im wondering, since these are too different nookcolors, should i restore the cm7 backup or flash it brand new. because i had a ton of stuff on the old one and i dont want to lose it. so can i ust do advanced restore and restore data, or can i restore the whole thing or just flash and slowly get my stuff back?
update cwm
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
bl3achcrazy said:
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
Click to expand...
Click to collapse
i have tried 3.2.0.1 but get same error message
3.2.0.1 on the bootable card or already on the eMMC? It has to be on the bootable card.
Thanks
It works after getting my nook color around 2pm today and taking it home. I was working on this thing all day I tried several ways and this one worked!!! Having issues with wifi that's all
Ok, the more reading I do the more confused I get.
I have a nook 1.3 that I bought for my son. The reason I chose the nook was because I could put the market on it and give him the games he's always playing on my phone. I'd LIKE to keep the stock reader as well because he's only 7 and I like the read to me feature on it as well. My first attempt to root was an abject failure, and now with 1.4 coming out I'm totally lost.
From my poking around here is some of what I gather:
Some of that I gather is:
The market doesn't work when you use the current root files on 1.4. Or does it? There doesn't seem to be a consensus
Some nooks with 1.3 get the boot loop when using the two "current" nooter files (that's what I experienced), but you can use the older file and just have an older market
At this point, I'd really like to know what my options are. Right now I'm sitting at 1.3, and may (or may not...I think I might have goofed the first root process up) have one of those nooks that hangs. My #1 priority is the market, and #2 (or maybe 1A) is keeping the reader. What are my options for this? Or do I just create a bootable SD card and give him a plain Android tablet until this all washes out?
Girevik said:
Ok, the more reading I do the more confused I get.
I have a nook 1.3 that I bought for my son. The reason I chose the nook was because I could put the market on it and give him the games he's always playing on my phone. I'd LIKE to keep the stock reader as well because he's only 7 and I like the read to me feature on it as well. My first attempt to root was an abject failure, and now with 1.4 coming out I'm totally lost.
From my poking around here is some of what I gather:
Some of that I gather is:
The market doesn't work when you use the current root files on 1.4. Or does it? There doesn't seem to be a consensus
Some nooks with 1.3 get the boot loop when using the two "current" nooter files (that's what I experienced), but you can use the older file and just have an older market
At this point, I'd really like to know what my options are. Right now I'm sitting at 1.3, and may (or may not...I think I might have goofed the first root process up) have one of those nooks that hangs. My #1 priority is the market, and #2 (or maybe 1A) is keeping the reader. What are my options for this? Or do I just create a bootable SD card and give him a plain Android tablet until this all washes out?
Click to expand...
Click to collapse
May I suggest you start from the beginning. Samualhalff here has a great utility to take you to pristine stock. Apply the 1.3 update and use your bootable uSD, install Gapps (latest) and go a step at a time.
I've had success with the above ending up in CM7 7.0.0.3. You'll always have the "reader" using Aldiko, B&N or whatever you choice is.
skeeterpro said:
May I suggest you start from the beginning. Samualhalff here has a great utility to take you to pristine stock. Apply the 1.3 update and use your bootable uSD, install Gapps (latest) and go a step at a time.
I've had success with the above ending up in CM7 7.0.0.3. You'll always have the "reader" using Aldiko, B&N or whatever you choice is.
Click to expand...
Click to collapse
Ok, I guess it's time to display my ignorance.
First of all I think I AM at pristine stock, but what do I know? The nook came with 1.3 on it (just got it last week), and after my isues trying to root it the only way I was able to get it back working after beein stuck in the boot loop was with the "8 failed boots" method. My understanding that was akin to a factory reset so it was back to just like it was out of the box.
So that brings me to:
- I don't need to apply any updates to get it to 1.3, right?
- When you talk about my bootable uSD card, exactly what do you mean? The only thing I've created is the CockWorksRecoveryMod SD card to apply the ManualNooter files.
- I'm not sure what Gapps is (and I feel like I should)
- If I flash a rom, I understand I can download the B&N (or whatever) Android software, but I though the color stock reader (and only the out of the box reader) had the feature where it could actually read some books to you (a feature I think might be nice for a 7 year old)
Girevik said:
Ok, I guess it's time to display my ignorance.
First of all I think I AM at pristine stock, but what do I know? The nook came with 1.3 on it (just got it last week), and after my isues trying to root it the only way I was able to get it back working after beein stuck in the boot loop was with the "8 failed boots" method. My understanding that was akin to a factory reset so it was back to just like it was out of the box.
So that brings me to:
- I don't need to apply any updates to get it to 1.3, right?
- When you talk about my bootable uSD card, exactly what do you mean? The only thing I've created is the CockWorksRecoveryMod SD card to apply the ManualNooter files.
- I'm not sure what Gapps is (and I feel like I should)
- If I flash a rom, I understand I can download the B&N (or whatever) Android software, but I though the color stock reader (and only the out of the box reader) had the feature where it could actually read some books to you (a feature I think might be nice for a 7 year old)
Click to expand...
Click to collapse
OK. Guess maybe I mis-read your post! My fault!
Personally I have never gotten the "hang" of 8 Failed Boots. I have just wiped /data and /system then loaded stock.
If you are at stock 1.3 (and unrooted and no CWM) you can verify in Settings if you wish but it sounds as if you are.
Format your uSD using this. Then follow these directions. This will give you a good format on your card and help you create a working bootable uSD.
I post this as I have seen many uSD card not formatted correctly (never use windows format or your device to format..often corrupts)
You can also load whatever ROM you wish to instalkl on the card but flash it only after you have rooted and installed CWM.
Gapps is Google Apps. Installs Market.
HTH!
skeeterpro said:
OK. Guess maybe I mis-read your post! My fault!
Personally I have never gotten the "hang" of 8 Failed Boots. I have just wiped /data and /system then loaded stock.
If you are at stock 1.3 (and unrooted and no CWM) you can verify in Settings if you wish but it sounds as if you are.
Format your uSD using this. Then follow these directions. This will give you a good format on your card and help you create a working bootable uSD.
I post this as I have seen many uSD card not formatted correctly (never use windows format or your device to format..often corrupts)
You can also load whatever ROM you wish to instalkl on the card but flash it only after you have rooted and installed CWM.
Gapps is Google Apps. Installs Market.
HTH!
Click to expand...
Click to collapse
I tried to load stock back, but it seems that ANYTHING I tried to do (including the root) resulted in a boot loop on the "nook color" screen. It seemed that nothing I tried to do did anything but make it loop until I found the faild boot trick. I was even getting an error just trying to wipe the data, which had me worried.
When you talk about loading a ROM on the card and "flashing" it, is that to replace the nook OS with the ROM? I don't think I want to do that now since I'd like to keep the stock reader.
Ideally I'd like to just root and get the Market, but after my first failed attempt, learning that 1.4 is on the horizon, and that some 1.3 nooks seem to get the nook boot loop when using ManualNooter, I'm a little gun shy. At this point I'm thinking I may want to wait until someone has a stable root process for 1.4.
Does the nook have to be rooted if I want to boot an OS from the SD card? I'm thnking that may be my best compromise at this point.
Girevik said:
I tried to load stock back, but it seems that ANYTHING I tried to do (including the root) resulted in a boot loop on the "nook color" screen. It seemed that nothing I tried to do did anything but make it loop until I found the faild boot trick. I was even getting an error just trying to wipe the data, which had me worried.
When you talk about loading a ROM on the card and "flashing" it, is that to replace the nook OS with the ROM? I don't think I want to do that now since I'd like to keep the stock reader.
Ideally I'd like to just root and get the Market, but after my first failed attempt, learning that 1.4 is on the horizon, and that some 1.3 nooks seem to get the nook boot loop when using ManualNooter, I'm a little gun shy. At this point I'm thinking I may want to wait until someone has a stable root process for 1.4.
Does the nook have to be rooted if I want to boot an OS from the SD card? I'm thnking that may be my best compromise at this point.
Click to expand...
Click to collapse
Understand. Actually 1.4 is available right now for download from the Support section on BN site. If you wish, go ahead and get it, load it to the root of your NC, let it go to sleep and it will update automatically for you. (Directions on the BN site) If you wish to load CM7 for instance, you may wish to reload 1.3 for now as I don't see a 1.4 version yet.
Once that is done you will be at stock 1.4 (if you go that way). And yes, you can load your choice of ROM from the uSD. One of the really neat things about the NC is that it boots first to the uSD then to the internal. There are several choices in the Development section to choose from. Try out several and pick the one you like (I prefer CM myself) Keep in mind that booting from the uSD will not be as fast as if it was loaded to your internal but doing this will also keep your stock safe. And no, you need not be rooted to boot from uSD.
For example..... verygreen.
Let me know how it goes!
Ok, cool. So it sounds like my plan for now is to get 1.4 then boot off of an SD card. When and if we can root it successfully, I'll make that jump.
I asked this in another thread, but I'll do so hear as well. What happens to apps I download while booted from the card? Are they installed on the card or the nook internal memory? And if it's the nook memory, what happens when I boot to the nook?
Girevik said:
Ok, cool. So it sounds like my plan for now is to get 1.4 then boot off of an SD card. When and if we can root it successfully, I'll make that jump.
I asked this in another thread, but I'll do so hear as well. What happens to apps I download while booted from the card? Are they installed on the card or the nook internal memory? And if it's the nook memory, what happens when I boot to the nook?
Click to expand...
Click to collapse
Golly. It's been so doggeone long since I ran anything off the uSD....if I remember right.....Ya know....I believe everything runs from the uSD. I would sideload the apks. Lemme think about that one. That was like Months before last Christmas lol
For what you want, I would just do a MN Root of the stock Nook software. Then you wouldn't have to deal with switching back and forth between CM and stock.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
For what you want, I would just do a MN Root of the stock Nook software. Then you wouldn't have to deal with switching back and forth between CM and stock.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
From what I've read the 1.4 doesn't have reliable root yet. So you have two choices really. Leave as is and wait (I'm betting root will come to 1.4 eventually) or wipe (system/data) back to 1.3, load and MN/AN.
Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
Can I revert to 1.2 if my nook came with 1.3 on it OOTB?
koopakid08 said:
I'm not sure about the progress of a 1.4 root but I do know that 1.2 is very easy to root as you only have to flash one file.
So unless you really want the small added features of 1.4 I would just revert to 1.2 and stay there until a 1.4 root is finalized.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter
miss_october said:
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter
Click to expand...
Click to collapse
Sure can. I ran Netflix on 1.3 (and I'm thinking 1.2 also) but I believe due to a small glitch one needed to modify the build.prop file. Very easy to do really And it works! The posts should still be in the forum. Search Netflix. That should get you what you need.
Girevik said:
That's my long term goal. but is the root on 1.4 working yet? I tried to do the MN root (but may have missed a step) on 1.3 and got into a boot cycle. I was thinking I'd just let it upgrade then once all the 1.4 stuff was figured out do a root then
Click to expand...
Click to collapse
Girevik, we exchanged messages on this topic in another thread. I wanted to let you know I've had some success with rooting 1.4.1 to the point that it might be suitable for what you want. See message 92 in this thread.
In short: You can sideload apps and run them in the B&N Walled Garden. You can't download or refresh apps, but you can work with sideloaded books and apps. It's not 100% stable yet, but I think with careful selection of sideloaded apps, it may be.
Girevik said:
Can I revert to 1.2 if my nook came with 1.3 on it OOTB?
Click to expand...
Click to collapse
Yes, you just need to flash the 1.2 zip
---------------------------------
Sent from my LG Optimus V using Tapatalk
miss_october said:
In doing this nooter on a 1.2 are you still able to have flash and the netflix app work? or do you have to have 1.3 or 1.4? I see 1.4 is bnn making netflix available, but im guessing if you root on a 1.3 you can gain access to the app? is it the same for 1.2? I have the netflix.apk file to sideload in either case. Just curious before I go wiping my nook and starting fresh (was gonna go with cm7 on a disk dual boot with 1.4) or go to 1.3 and manual nooter
Click to expand...
Click to collapse
Yes both will work on 1.2 and 1.3
---------------------------------
Sent from my LG Optimus V using Tapatalk
bobstro said:
Girevik, we exchanged messages on this topic in another thread. I wanted to let you know I've had some success with rooting 1.4.1 to the point that it might be suitable for what you want. See message 92 in this thread.
In short: You can sideload apps and run them in the B&N Walled Garden. You can't download or refresh apps, but you can work with sideloaded books and apps. It's not 100% stable yet, but I think with careful selection of sideloaded apps, it may be.
Click to expand...
Click to collapse
I think I saw that. I'll take a closer look, but to be honest right now I think my son will be be more likely to use the the straight Android boot to have access to the games he's always playing on my phone. I'm hoping that will change, but as this point I'm thinking I'm better off waiting until I can get the Market and Amazon Appstore on 1.4 and just getting the stuff he's used to playing with. I'd really like him to use the BN reader, but realistically I don't know how much he'd use that right now.
Frankly, it comes down to me not really wanting to go through the effort of sideloading the games he plays. I'd really just like to get it connected to the Market and Appstore and downaod the stuff he uses.
If I were you, I'd create a CWR bootable and flash CM7 or one of the other many available ROMs (possibly MIUI, I heard it's pretty top notch, somewhat akin to the layout of iOS). I find the NC's OS somewhat distasteful. I believe Dalingrin once said that he knew the NC better than its creators. Anyways, personal bias coming into account, I flashed CM7.1 and never looked back. It's completely up to you. If you do choose to take my advice, there are alot of good devs who can help you out with the process. Dalingrin and Fattire are 2 of my favorite devs.
I used to have a forum signature... then I took an arrow to the knee.
Hey, i'm new. Just made this account to get help with my nook. Anyway i'll just tell you all what happened because i don't know much about it.
There's two problems i have with it. 1 - Can't sync my google account and 2 - Can't get past the boot animation, keeps re-booting
BTW just got the nook color second hand yesterday, he said it had Android 2.2? on it, not too sure. He also said he did a factory reset on it, hence me trying to link my google account etc. As of right now, i'm not sure if it is rooted or has a ROM? or anything, i just want it going again.
Problem 1 - It was going fine and I was setting it up with the android start up thingy on the screen, but no matter what I tried I couldn't sync my google account with it to get on the android store. I could go on the internet and gmail etc fine, just nothing that needed a google account synced. I tried the usual fix of signing into YouTube using the gmail account but this still didn't link the device to my google account.
Problem 2 - Just last night when I was reading a book on it, it shut off randomly, I thought thats odd because it was like half battery, so I plugged it in via usb. Now whenever I plug it in to usb. It reboots and reboots and reboots. It shows the touch the future of reading logo, then a grey n, then the screen flashes yellow for a split second. It goes to a screen saying it is installing a new software update, but would cut out part way through and re-start the reboot loop. When i unplug it from the power it shuts off and wont turn on. I tried a factory reset and this started, but when it finished 'clearing data' it cut out and restarted the boot loop. As i'm typing it's next to me continuously re-booting.
Please help!! I'm a noob and need guidance haha.
But seriously thanks to anyone who helps
Joel
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
leapinlar said:
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
Click to expand...
Click to collapse
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
longschlongsilver said:
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
Click to expand...
Click to collapse
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
leapinlar said:
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
Click to expand...
Click to collapse
So I make the CWM card. If i flash the stock 1.4.3 is that how it comes originally? Then can i root it from there, then CM7 etc? And is that all compatible with the 1.1 version? sorry for all the questions. and thanks so much! Any ideas on syncing a google account once i get it going?
Cheers
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
leapinlar said:
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
Click to expand...
Click to collapse
Sorry for my noobness but what does flash and wipe mean? Never done this before. I just got an sd card reader thing so i can write things on it with win32 disk imager. So to get out of the boot loop i have to flash? a repair zip? I had a look on the help post of yours, would 'NookColor-emmc-stockrecovery-CWM5504asAlt.zip' work? and do i write the whole zip file on the sd card without extracting anything? then what would i do? just turn it on? sorry once again you're a huge help
The first thing you do is unzip the file cwm-5.5.0.4-bootable_SD.zip. That will give a file about 200MB in size with a .img file name. Use win32diskimager to burn that .img file to your SD. Then that card can be used to copy (flash) things to your internal memory to either fix it or put new roms on it. If you put that card in the nook and boot up from a powered off state, the CWM program should start. You can use that to put new things on your internal memory.
Wipe means to format or erase things. Sometimes it is important to wipe what is already there before you try to put new things on.
Given your description of the problem, I would burn the CWM to SD, copy the zip named romrestore-CWMflashable.zip to the SD with your PC, put the SD in the nook, boot and the CWM menu should come up. Select "install zip from SD" and hit the n button. Then select "choose zip from SD" and hit n. Then scroll to the file you copied and hit n. Confirm the choice and CWM will begin it's thing. Watch for error messages. If it completes successfully, power off and remove the SD and see if it will boot. If it does boot successfully, you just repaired it. If it did not repair it, go to my partition repair thread and try some of those repair zips using the same technique.
If you were successful with the repairs, you can use the CWM SD to flash new roms to internal memory (stock or CM). Don't forget to wipe first if you do. An easy, surefire way to wipe is to flash my format 5-6-7 zip on my tips thread.
FIXED! Thanks so much. Gonna root now and then install cm7 or something haha, thanks again for your patience!
I installed CM9 Eyeballer the other day on my NC. It pretty much works, but if I go into the web browser or any other factory-installed app, hitting the "N" button takes me back to the factory-installed home screen, and I can't find any way to get back to the Android home screen, short of rebooting the device. Is this normal?
Also, I flashed Gapps using gapps-20120429-ics-signed.zip, and the only Google App that appears is Play Store -- I was able to sign in, but the next screen gave me a "Server Error," and that's all it's done since. I verified the md5sum, and also tried again to install it. No change. Is there some version conflict, or something like that?
Edit: did not install CM9, after all. I now have.
What is the 'factory installed home screen'? You mean stock? That is not possible if you installed CM9 over the top of stock on emmc. Can you explain a little more how you installed it and what you mean.
Well...
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
estebandido said:
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
Click to expand...
Click to collapse
Your original post said you installed CM9. You did not. You just rooted your stock rom. You might want to edit the title of the post to 'Manual Nooter installed properly, Gapps not working. Then take that CM9 Eyeballer statement out of the text in the first post and you might get some proper responses from folks.
Sure enough.
leapinlar said:
Your original post said you installed CM9. You did not. You just rooted your stock rom.
Click to expand...
Click to collapse
Ah... I was under the impression that Eyeballer was a version name of CM9. None of the sets of instructions I read made it clear to me that wasn't the case.
I ended up doing a factory reset, then reinstalling everything. The picture is far rosier now -- it finally looks the way I pictured!
Thanks!
estebandido said:
Ah... I was under the impression that Eyeballer was a version name of CM9.
Click to expand...
Click to collapse
Eyeballer does build a version of CM9. But that has nothing to do with what you did. You ran Manual Nooter, which is a tool to root your stock installation. CM9 is a completely different version of Android than stock is. And when you install CM9, your stock is completely removed and replaced by CM9.
You do not have CM9 installed, you have just rooted your stock rom.
Anyway, I'm glad you got it working.
Edit: I see you modified your original post to say you did later install CM9.
[ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL
I don't have enough posts in XDA to post in the (goo dot gl/vPJcM) actual ROM thread so I'm hoping someone will see it here.
After installing the CM7 ROM a long time ago. they Nook wasn't able to boot into CWM. I can only access the recovery using a bootable SD card. That may or may not matter.
Yesterday I installed both the 3 SEP OpenGL and 4 SEP versions of Eyeballers CM9 ROM along with GAPPS. In both versions I cannot get bast the Setup Wizard since it "unfortunately Closed" every time I "touch the Android".
I did install the ROM w/o GAPPS as a temporary fix but will need to eventually access the Play Store.
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Does anybody have any suggestions?
Thanks!
JC
jerrycrabb said:
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Click to expand...
Click to collapse
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
From what I can tell, Eyeballer is mostly drinking.
leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Thank you very much for the response, I will try this as soon as I get some time (I have a selfish new baby) and get back.
leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Success! errr..sort of.
Prior to flashing gapps I was able to reboot into CWM. Thank you so much for your help!
Still having the same issue with setup manager after factory reset and wipe of all cache.
If anyone has a work around or another suggestions for CM9 on the NC I'd much appreciate it.
Thanks again.
So I finally got arround to getting my Nook up-to-date from 7.1 to the 7.2 encore CM7 rom. Thought that Rom Manager would take care of everything for me, and it looked like it was well on its way.
So it finally downloads and I'm all excited to install it, maybe it'll help the random hanging errors when I'm on wifi. (dummy me) Selected just to wipe dlavick (sp?) cache and not backup current rom, and durring the install, it reports a critical error and fails out. Okay, fine, sounds good, i'll just hop online and figure out how to manually install it. I reboot, and it just hangs. Wierd, but I reboot again. And again. And I finally come to the conclusion that it must have screwed over my old rom as well.
If anyone can give me an idea of how to proceede, do i reflash a new rom? And how do I go about it without damaging the current files that I have installed, I've got a few hundred ebooks and comics that i'd hate to lose.
breakneat said:
So I finally got arround to getting my Nook up-to-date from 7.1 to the 7.2 encore CM7 rom. Thought that Rom Manager would take care of everything for me, and it looked like it was well on its way.
So it finally downloads and I'm all excited to install it, maybe it'll help the random hanging errors when I'm on wifi. (dummy me) Selected just to wipe dlavick (sp?) cache and not backup current rom, and durring the install, it reports a critical error and fails out. Okay, fine, sounds good, i'll just hop online and figure out how to manually install it. I reboot, and it just hangs. Wierd, but I reboot again. And again. And I finally come to the conclusion that it must have screwed over my old rom as well.
If anyone can give me an idea of how to proceede, do i reflash a new rom? And how do I go about it without damaging the current files that I have installed, I've got a few hundred ebooks and comics that i'd hate to lose.
Click to expand...
Click to collapse
Go to my tips thread linked in my signature and make a bootable CWM SD per my item A10. If your books and comics are on SD do not use that SD for CWM, use a different one. Then you can flash the new CM7.2 ROM with that. It should boot fine for you. If it still balks on you, go back to CWM and do a wipe data/factory reset. That will wipe out the installed apps and settings, but will not effect the books and comics you have on your media partitions (emmc and sdcard). But you will have to reinstall all of your apps.