Hey so i tried to install a different rom on the hd2 so i just downloaded another rom and tried to install it through the clockwordmod recovery. I formatted the sd card and wiped to the factory settings but it didnt install any roms and when i turn it on, it shows the tmobile logo and goes to the magdlr screen and it finally shows the cyanogen's android logo but it resets again and start all over again from the tmobile logo and it constantly does that. I am trying to reset my phone to the factory settings (windows 6.5) through the pda phone rom update utility but i get the error 260 (connect). my computer recognizes my phone but this doesnt. Please please please help!!! Thanks :/
did u install the right partition for the rom ? and for the connection error it does it when u dont have hspl installed
Related
Hi All,
i was tring to install Android to my HTC HD2 Wm6.5 when it boot something happened it stop. Then it is not connect to computer and do not work Hard Reset ROM deleted Compleatly blank.
When i open device screen olnh HTC logo. No work.
How could i install any Rom?
Win65 or Android.
Please Help.
Can you get to the Bootloader....
the screen with rainbow colors ??
Seems like this is cropping up on a daily basis lately.......
As mentioned by backlash, get to bootloader......
(turn on while holding vol down)
Check your HSPL is still installed.
Reflash a WM6.5 ROM..
Then follow this step by step guide.........
thank you. i install wm65 again.
i wont try android again. for while
hey all,
Wanted to do a clean installation of cyanogenm7,
Step by step:
entered bootloader
run task29
enterbootloader
install radio 2.15.50.14
enterbootloader
install magldr113_daf
thats it..
now, it can never use usb flasher (in order to install cwm) from magldr
for only 2-3 times it connected from USB in bootloader, and now it does not happen either. and I couldnt install cwm on that bootloader ofcourse.
windows faults; device not recognized..
did it brick? and.. why?
I'm leaving town for a business meeting tomorrow and have no backup phone right now.
save me please! =)
came home to try on a machine with XP (activesync present)
cant connect and also XP gave the same error..
device not recognized..
any ideas?
went back to laptop, win7x6
it didn't recognize at first, as usual
then it went USB on bootloader.. (did a restart first, and then it says HTC USB SYnc is successfully installed)
task29 'd again
fine
radio install began and, lost connection in the middle.
now says rom code error as normal, but again not recgnizing the device...
If aynone interested, or anyone else having the same problem at the future,
the phone is at the service and the mainboard's gonna be replaced.
http://forum.xda-developers.com/showthread.php?p=15267315#post15267315
Maybe your usb cable is damaged
Might help if you do a fresh reinstalled of windows 6.5 will erase all. And try again.
Sent from my HD2 using XDA Premium App
if you were already running cm7 then all you needed to do to fresh isntall was boot into CWM and factory reset it and isntall the rom from zip
all those extra steps you have taken are pointless
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
samuel79 said:
hi all i ran this program as per the guide and got to the whare it says load rom and since then it has stuck on the loder screen sayin stick together the frist part went ok when it says do u see weve hack'd it can any one help , have i brick'd the phone
Click to expand...
Click to collapse
task29 erases EVERYTHING from your internal storage.
To flash a ROM now turn off the phone (battery pull).
hold the volume down key and press power.
You will now be at a tri-color screen.
now flash any WinMo rom from RUU or flash magldr for Android/WP7.
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
samuel79 said:
i have dwonload the omega file but it wont start up but in my frends pc it runs but cant find the phone
Click to expand...
Click to collapse
when you plug your phone into your PC and you're in bootloader does it say "USB" on the phone?
edit: you on a tmobile USA phone or international one?
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
samuel79 said:
uk t mobile unlockd when i try'd it in my frends pc it says it dectects the procsser but wont install hardwaare but it dont have activesync on it /running xp
Click to expand...
Click to collapse
You don't need activesync on it since you are running from the bootloader. The only reason you would use activesync is to get it into bootloader mode.
does it say USB on your phone in bootloader when you connect it?
task29 erases everything except the HSPL...
so...after task29...
flash your stock ROM and done!
OR
if you want to use a custom ROM that INCLUDES a radio, then flash the ROM and done!
OR
if you want to use a custom ROM that DOES NOT INCLUDE a radio, then flash the chef recommended radio and ROM and done!
i have a feeling this "omega" ROM you speak about might not include a radio. this would be mentioned in the thread of the omega ROM...read and proceed accordingly.
I had the same problem. Turns out it won't work on my Lappy that is running XP but when I tried again using my wifes Lappy with Windows 7 it went straight on. I was at it for two days trying to get it to work. Took only a few minutes once I swapped Lappy's!!.
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!