What happened? My A7 suddenly only goes to just a black screen with Android text on it. Nothing I do gets it to boot past it. I decided to reflash with 1.42 and it is gone. The file is gone from Dexter's server. the 1.41, honeycomb alpha and the blur mods are there. I can't find it or fix my problem.
Anyone?
Just popped up
Interesting, it just popped back up.
Related
hey everyone got a problem with my mytouch3g
I already had the Cyanogenmod 4.2.15.1 working perfectly fine
then I installed the RC30 mod v1.2
restarted phone and it becomes stuck on splash screen (I have waited 30 min to declare it was stuck)
Restarted again and again still stuck.
I tryed reinstalling CyanogenMod didnt do anything same problem
I wiped my data.
I formatted my microSD(FAT32) its a sandisk but it worked perfect before so im sure its not an SD problem
Now im trying to revert my phone back to cupcake using SAPPIMG.nbh
it loads up reads the image go through and gets stuck updating RADIO_V2 the red progress bar on top is like 99%
any ideas on how to get my phone working again?
i got it now, i installed a different rom then back to my rom
My a500 is possibly very bricked, but I thought I would ask here before I sent it back to acer.
I was at 3.1 Acer_A500_4.010.40_COM_GEN1 and then I updated to stock 3.2 Acer_A500_4.010.40_7.006.03_COM_GEN1. I tried to go back to 3.1 and that of course did not work. So I tried to go back to 3.2. The update went along as usual and then it stopped about 90% of the way and sat there. I powered off and then on..
It went to the acer screen and the android screen and then to a black screen with the usual icons at the bottom (back, home, clock) and has an icon that looks like a pulley with the words "Android system" in the upper left corner.
I am just throwing this out here to see if anyone knows anything about this and a possible fix.
I formatted my sd card with the sd card formatter and the 3.2 update was decrypted. I don't think I used a corrupt update. I have also done the power button, vol +, toggle screen lock to flush my data and cache.
Thanks
Edit:
Not sure what happened but I thought I would do one more try and I was able to get to the 3.2 rom.
I had something similar happen. I reapplied the 3.1, then the decrypted 3.2 again and after a couple of times doing this the 3.2 update finally went all the way through again.
Hope this helps!
*edit*
Glad to see you got it
Thanks for the reply, I did try it one more time (for a total of about 10 flashes..) and it worked!!
I Fixed My Brick
After tons of searching on how I was going to get back to my rooted 3.1
Acer A500....That was after I accepted the 3.2 OTA Update (STUPID)
I ended up thinking I could just load one of the Full Package 3.1 's
and ended up Bricking the Darn THING ! (I am a Total NOOB with Android)
BUT...with the help of GAMEZR2EZ and the post at
http://forum.xda-developers.com/showthread.php?t=1277277
BACK UP AND RUNNING Thanks !
Hi all
I have just got my Vega and I have been attempting to master the nvflash technique but with no success.
Everytime I attempt it the screen lights, the android appears and then the unit goes off and there is no indication of any connection between my PC and the Vega.
Anyway I was checking my firmware version and it appears to be V1.11
2.6.32.9_P10_V1.11_20110627_DIX
Has anyone get any experience of this firmware as I cannot seem to find it mentioned anywhere and I am wondering if Dixons have locked the nvflash?
Thanks for you help ahead of time
Oh I think I should mention I have managed to install Clockworkmod V3.0.24 but not yet rooted the device and I was wanting to install modeed stock v2
Thanks again
Oops this doesn't look good, I know this thing is supposed to unbrickable and I do have a nandroid copy of the firmware on the SD card
But I have just shut the unit down to reboot it and it will not come on now.
All that happens is the screen lights up and nothing else.
I have tried shutting it back down and booting again, I have tried the nvflash sequence again but nothing, just a backlit screen and nothing else.
Also whilst the power is plugged in the unit will not even attempt to come on when trying nvflash, I should have mentioned that before as that has always been the case.
All I have done today is install the getjar app, facebook, angry birds and moved the Clean & Stable Add-On For All Stock Firmware V4 mod to the software update folder but not actually flashed it.
I have even taken the SD card out and tried booting up but still the same result.
Any ideas anyone please?
OK that seems nuts but the thing has finally gone into recovery mode just as I had all but given up, I have now updated it with modded stock v2 and vegacomb and just waiting to see if it is now sorted.
It came on and went through all the vegacomb animations but now it appears to be a blank backlit screen again
put original stock firmware back on it, you may fine only v 1.10 on the internet, so give that a try.
Thanks for the reply mate
I have managed to do exactly what you suggested and nvflashed the original Vega1.10 and have since updated with modded stock V2 and then updated to Vegacomb and all seems great except for the odd crash but they are fairly far and between
Hey guys, I have been having some issues with this. I'm on Mirage Kang 7.2. Usually, Mirage is wonderful but something went wrong today. I was in the Play Store on my Nook updating four apps (like EzPDF, Go Launcher, not sure it matters though...). Anyways, it froze so I force shut off the device but when I went to turn it back on nothing happened, it just went to the infamous black screen. I did some searching and people said the boot partition is corrupted.
I tried updating the ROM to the latest release to see if anything would happen to no avail. I tried plugging the Nook into my computer and turning it on but that didn't work either. The only ways I could find to fix it was to revert back to stock. Does anyone know a way out of it while keeping my apps, data, etc?
http://forum.xda-developers.com/showthread.php?t=949699
Dummies Guide to Fixing 'My Nook Won't Boot
Hi. I have successfully rooted my tab and put cwm based recovery on it. However, after every reboot, it shows "Android is upgrading". It comes to the home screen eventually but its a bit annoying and i was wondering how to fix it. I havent removed any stock apps as of now. Anyone have any ideas?
EDIT: On another forum it says that removing and reinstalling TB fixes it! Havent tried it yet.