Database Users

upgrading with activesync

hi all ..first you are wonderful for creating this site
thanks for all information
My device is HTC made xda 1 which in Turkey sold by escort computer and they build their cooked rom 3.20.03 eng and radio version 3.25.00 900/1800 freq.
Other than rom ver. it is equal of qtek 1010 .
I want to upgrade rom to win2003 .. when I begin the upgrade by activesync my device automatically soft reset itself and on my pc activesync 3.7 ver. shut itself.
I ve tried 3 times but nothing changed . Can you help me please.

Try it with a lower version of ActiveSync. Like V3.5 or V3.6
Regards
Mark

If your current radio stack works ok I would suggest leaving it alone, if your connection to activesync is likely to fail I suggest you use sd card flashing, much more reliable. If you are upgrading radio stack over activesync and the connection fails, you may end up with a pda but no phone. :shock:

I have tired with activesync 3.5 but also my device soft restarts and connection broken.
How do I use wm2003 by my 128 mb sandik SD card. and install the wm2003 to it with bootloader.??
Please make me understand in detail....

Search the forum for "sd flash rom"
For example the following link: http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=sd+rom+flash
Regards,
Mark

BLUETOOTH PROBLEMS !(for TomTom GPS receiver) HELP ME please

hi guys i'm a newby (this forum is great!)
i'm from Italy
i've a problem for my S100-Jam-Magician smartphone.
The Bluetooth doesn't work...
i tried before to connect a my friend's phone via bluetooth, the magician recognize the phone (i can read the name of the phone in the bluetooth settings) but the communication doesn't work.
i cant't upgrade the phone on clubuimate, (i don't have the time to explain) so i'm here.
now i've bought this GPS receiver (Sirf STAR III) http://www.handnav.co.uk/product_details.php?id=228
and i've installed the tomtom navigator 5 software (it works) with italian Map.
as for the phone The Magician relevate the name of the receiver, but it doesn't work, there are problems and the bluetooth connection go down automatically. (i've tried normal ways e all normal settings combination - port 4 , 5 , but nothing-9
Appears continuosly the message
"Desligue o modo de voo em primeiro lugar!"
i think it's spanish or portoguese, but i don't undestand why, because i have the italian rom. U(maybe because i had installed before another version of tomtom navigator with portoguese map?)
i've read other post about bluetooth but the tools doesnìt work and i haven't founded the .cab file that maybe solve bluetooth problems.
Can you help me ?
i'm in troubles !
SOLUTIONS :
1) some patch to install that resolve bluetooth problems
it should better because the phone works good...
2) upgrade magician ROM
i don't know which is my rom version
during the magician rebooting appear
R 1.05.00 G 1337.39 D 1.06.04 ita
however i think it is old...
with an official (on clubimate) newer version are there bletooth improvings ?
IMPORTANT
a - i'd like a working italian version
b - i have seen the upgrading post for magician and i HAVE NOT UNDERSTOOD ANITHING...because i'm not a tecnich or expert...only a normal user ... forgive me
there is a easier and more detailed tutorial?
is there some italian user that can help me?
my msn accont is [email protected]
thankyou

The ?best? bt patch can be found here: O2 MINI NEW BLUETOOTH STOCK.
http://forum.xda-developers.com/viewtopic.php?t=33532&highlight=magician+stock+bt
Login to be able to download.
Find yourself a rom on the ftp, either shipped-rom (.exe) or image file (.nb1) and give me signal what you've chosen. I'll send you the instructions for the necessary steps.
Cheers, M

Hello!
Before upgrading your Magician, You should test your bt GPS connection with an other little GPS software like cemonitor ( download link--> http://www.gpspassion.com/fr/download.asp?dl=1 )
Try to find your BT GPS com Port normally is com 5. If not I give you a little soft that map the com5 automatically at start. It is "tomtom5patch.exe" that must be on your "\windows\Startup\" folder.
SoftReset your Magician after this install.
In CEmonitor, set the com 5 and look if your GPS communicate.
I forgot to tell you to set the BT GPS on the windows settings, with the correct password. You probably made it before.
Try it and ask again...

nothing to do
the first patch is good but doesn't resolve my problem
that damned write in spanish continues to appaer when i try to make bluetooth work and bluetooth shut down.
the second patch doesn't work, when
i think i have installed a wrong or damnaged software on the PDA in the past that has ruined something...
THANK YOU for the helping,
now i'll try to install a new rom with your help.
have you got any suggestion for the rom to install?
do they work all fine, even in italy? wìhich is the best one in your opinion?
is there the risk to damnage the magician?

There's a 1.12ITA shipped-rom on the ftp under magacian. This is the safest upgrade.
- make a backup of every piece of data you want to keep, especially contacts, calendar, tasks. Everything will be lost & programs need to be reibstalled
- synchronize with outlook via Act.Sync
- Download the ITA1.12 shipped-rom
- execute the downloaded file
- follow instructions on your PC & watch the progress on the magician as well
- when finished, you'll be asked to hard-reset
- hard-reset & enjoy the upgraded magician
- synchronize the outlook data
- reinstall your programs
That's it.
Regards, M

it seems simple...
now i try

grazie !!
thank you all
now al things work perfectly.

You're welcome.

Hi,that message(desligue o modo de....)compare from a few time on my magician.The rom is the same from 8 month,and the messagge compare from 1 month.The only things that I change are the 2 giga sandisk,and I installed 3 different navigator on my device.I don't think the problem comes from rom(1.12 ita),maybe from sd or other navigator?

Setting Tytn to 2G only after Rom upgrade. Now it will not connect to BES

I am hoping that you can help me out with a little situation that I may have created on my HTC Tytn.
I was using the original ROM that Shipped with my Tytn and I was experiencing a "slow" device with some audio problems while in calls. Yesterday, I decided to upgrade. I installed SPL-2.10.01ipro. as per the warnings on the page (thankful that I have not bricked my phone) Worked perfectly for allowing myself to upgrade to what I think on the downloads page was the most current "stable" rom. Currently my Tytn is running the download listed below.
Upgraded HTC English Qtek_001
Rom 2.11.255.1 03/07/07
Exp Rom 2.11.215.102
Radio 1.38.00.10
Protocol 32.71.7020.12H
OS Build 15673.3.3.1
AKU 3.3.1
SPL 1.11
HTC BOOT 108
I have to admit, the unit runs great. Problem though, on the old OS, I was able to, under phone "band" select "2G". The reason for this is the Blackberry Connect software that I need to run for my work. (Or else I get assimilated into the world of Blackberry handhelds) will not connect as 3G. I have currently set the unit to "auto" for network type ("GSM ,WCDMA) and "auto" for GSM/UMTS Band. Any time I try to change this to anything else the unit comes back with a "Warning" that it can't complete the change. The unit still will not connect and says "Not Connected" under the bb_connect ver 4 status page. I have tried to install the older Rom back to;
HTC English
CID Q-TEK_001
ROM 1.18.255.3 7/22/06
ExtRom 1.18.255.106
Radio 1.03.03.10
Protocol 32.34.7010.01H
OS Build 14955.2.3.0
AKU 2.3
SPL 1.11
HTC_BOOT 1.04
I'm not sure if I can keep the upgraded radio and Rom versions and simply change the OS version but when I try to change to the complete rom above I get an error (260): UPDATE ERROR
"The Update Utility cannot connect to your PDA Phone. Please Check your USB Cradle/Cable is connected properly between the PC and your PDA phone"
The connection is good as I have been using active sync to install things like the blackberry software.
I am spinning my wheels here. I thank you in advance for any assistance that you can provide.

Bluetooth Issues

Hi there XDA ppl
I have a HTC P3600 Trinity, the problems that i have with it is that the bluetooth wont work properly. When i start it and try to connect to a pc, it finds the pc but it fails to connect to it, the same for other phones. I managed to send one file to a Nokia E71, but was not able to be found by that phone when it searched for me.
I configured the bluetooth to be visible, and i made sure that receive all incoming beams was selected.
I have Radio Version 1.56.70.11
ROM Version: WM 6.5 SSD Blue(8) 24001 by The.Decoy
I changed the radio ROM with 1.50 and it still didn`t work. Changed the ROM a couple of times... Same result.
Any chance someone could help me?

[Q] Issue with Radio Firmware Update.

Specs-
OS:
5.2.21892 (21892.5.0.89)
Manila Version:
2.5.20121412.2
Rom Version:
2.13.531.1 (90963) WWE
Radio Version:
2.10.50.26
Running the HD2 from Tmobile (578mb).
Issues-
When I run Leo_CustomRUU with the radio firmware (Eugenia Project - HTC HD2 Radio ROM - 2.12.50.02_2) renamed to RUU_Signed.nbh - it goes through all the prompts and it will eventually stop with an error message about communication errors with usb.
I tried several ports and even hooked up an older system to make sure it was not my rig. The usb on both machines works fine with activesync or as as mass storage device perfectly.
I was able to flash with HardSPL3 without a problem (got the We hacked it screen).
Yet, when I tried to flash the radio it gives me that communication error. If it helps I also get a similar error when trying to flash the room (I tried Energy.Leo.21679.Sense2.5.Cookie.DinikGlass.Sep.24).
Why am I trying to flash the radio firmware? My ultimate goal is to run Froyo. I have copied to the Android folder on my SD card a version (despite my best efforts to be specific on all other aspects, it escapes me the version I am running. I know it is froyo, I just do not recall the builder or version) and I am getting the dreaded robotic voices when I try to make or receive a call. So, rather than troubleshoot my android rom, I am looking to downgrade the radio and see if that solves it as from the pages I have read this seems a likely culprit.
I thank all in advance.
Update:
I found out that using HSPL3_PKG had not put my phone back to 2.08HSPL as it said.. it was still at 2.10. So, I tried highlighting the 2.08 regular, and it did go down to it. Yet, after trying three more times, it is not taking the 2.08HSPL. Anyone have any ideas?
Fixed:
Fourth time is the charm? Works now though.

Did you make sure you have an ActiveSync connection before trying to flash anything?

Dr.Jekyll,
Yes. When I connect the USB it asks for which way I wish to initialize it, I choose ActiveSync. That program starts up, syncs and stays green in the system tray.
I then double click on the Leo_CustomRUU program and click through the steps, the HD2 goes to the HTC with the progress bar as well as the program's progress bar.
It just sits there and does nothing. After about six to eight minutes, it will just speak of a communication problem and error out.
I do not know if this matters, but I am running XP Pro SP3 and ActiveSync 4.5.

Hi,
Why not flash from SD?
1. Rename the .nbh to LEOIMG.nbh
2. Copy to root of sd card
3. Shutdown device
4. Hold vol down and power
5. Follow the introductions
6. Press power button to flash rom
As taken from http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=615095
I seldom flash through ActiveSync WMDC, always from Storage card.
Cheers,
/Cacti